HMC890LP5E v01.0310 Typical Applications Features The HMC890LP5E is ideal for: Fast Tuning Response; 200 ns * Test & Measurement Equipment Excellent Wideband Rejection; 30 dB * Military RADAR & EW/ECM Single Chip Replacement for Mechanically Tuned Designs * SATCOM & Space * Industrial & Medical Equipment 32 Lead 5x5 mm SMT Package General Description TE Functional Diagram LE The HMC890LP5E is a MMIC band pass filter which features a user selectable passband frequency. The 3 dB filter bandwidth is approximately 11%. The 20 dB filter bandwidth is approximately 33%. The center frequency can be varied between 1 and 2 GHz by applying an analog tune voltage between 0 and 14V. This tunable filter can be used as a much smaller alternative to physically large switched filter banks and cavity tuned filters. The HMC890LP5E has excellent microphonics due to the monolithic design, and provides a dynamically adjustable solution in advanced communications applications. B SO FILTERS - TUNABLE - SMT 3 FILTER - TUNABLE, BAND PASS SMT 1 - 2 GHz Electrical Specifications, TA = +25C, Vfctl = Vbwctl Unless Otherwise Stated Parameter Fcenter Tuning Range Min. Typ. 1 3 dB Bandwidth O Low Side Rejection Frequency (Rejection >20 dB) High Side Rejection Frequency (Rejection >20 dB) Max. Units 2 GHz 11 % 0.86*Fcenter GHz 1.19*Fcenter GHz Re-entry Frequency (Rejection <30 dB) 9 GHz 3 dB Bandwidth Control (Vbwctl) 3 % Insertion Loss 9 dB Return Loss 10 Maximum Input Power for Linear Operation Frequency Control Voltage (Vfctl) 0 Source/Sink Current (Ifctl) Bandwidth Control Voltage (Vbwctl) dB 10 0 Source/Sink Current (Ibwctl) dBm 14 V 1 mA 14 V 1 mA Residual Phase Noise [1] (1 MHz Offset) -155 dBc/Hz Fcenter Drift Rate -0.3 MHz/C Tuning Characteristics [2] tFULLBAND (0% Vfctl to 90% RF) 200 ns [1] Optimum residual phase noise performance requires the use of a low noise driver circuit. [2] Tuning speed is dependent on driver circuit. Data measured with a high speed op-amp driver and includes driver slew rate delay. 3-1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC890LP5E v01.0310 FILTER - TUNABLE, BAND PASS SMT 1 - 2 GHz Broadband Insertion Loss vs. Control Voltages, Vfctl = Vbwctl 0V 7V 0 14V -5 RETURN LOSS (dB) -20 -30 -40 -60 -15 7V -25 -30 -40 0 5 10 15 20 25 30 0 FREQUENCY (GHz) 5 10 15 20 25 30 FREQUENCY (GHz) Insertion Loss vs. Control Voltages, Vfctl = Vbwctl LE Return Loss vs. Control Voltages, Vfctl = Vbwctl 0 0 -2 -5 0V -4 -6 7V -10 14V B SO -8 0V -12 -14 -16 -18 0 0.5 1 1.5 2 2.5 -10 S11 S22 -25 -30 -35 0 0.5 O 2 2.5 3 0 -5 RETURN LOSS (dB) -6 1.5 Return Loss vs. Temperature, Vfctl = Vbwctl = 7V +25C +85C -40C -4 1 FREQUENCY (GHz) 0 -2 14V -20 3 Insertion Loss vs. Temperature, Vfctl = Vbwctl = 7V 7V -15 FREQUENCY (GHz) INSERTION LOSS (dB) S11 S22 0V -20 -35 -70 INSERTION LOSS (dB) 14V -10 TE -50 RETURN LOSS (dB) INSERTION LOSS (dB) -10 FILTERS - TUNABLE - SMT 0 3 Broadband Return Loss vs. Control Voltages, Vfctl = Vbwctl 7V -8 -10 -12 -15 S22 -20 -25 -30 -14 -35 -16 -40 -18 S11 -10 +25C +85C -40C -45 0 0.5 1 1.5 2 FREQUENCY (GHz) 2.5 3 0 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 3-2 HMC890LP5E v01.0310 FILTER - TUNABLE, BAND PASS SMT 1 - 2 GHz 3 Broadband Return Loss vs. Vbwctl, Vfctl = 7V Broadband Insertion Loss vs. Vbwctl, Vfctl = 7V 0 -5 Vbwctl=4V RETURN LOSS (dB) Vbwctl=7V -20 Vbwctl=10V -30 -40 -60 -10 -15 Vbwctl=10V -20 -25 S11 S22 Vbwctl=7V -30 -70 -80 -35 0 5 10 15 20 25 30 0 FREQUENCY (GHz) 5 10 15 20 30 LE Return Loss vs. Vbwctl, Vfctl = 7V 0 0 -2 -5 -4 -6 -8 B SO Vbwctl=4V Vbwctl=7V -10 Vbwctl=10V -12 -16 0 0.5 1 1.5 2 2.5 Vbwctl=4V S11 S22 -10 Vbwctl=10V -15 -20 Vbwctl=7V -25 -30 -35 0 3 0.5 1 1.5 2 2.5 Center Frequency vs. Temperature, Vfctl = Vbwctl Insertion Loss vs. Temperature, Vfctl = Vbwctl O FREQUENCY (GHz) FREQUENCY (GHz) 4 +25C +85C -40C 3 3 3.5 4 0 INSERTION LOSS (dB) CENTER FREQUENCY (GHz) 25 FREQUENCY (GHz) Insertion Loss vs. Vbwctl, Vfctl = 7V -14 2 1 +25C +85C -40C -4 -8 -12 -16 0 -20 0 2 4 6 Vfctl (V) 3-3 Vbwctl=4V TE -50 RETURN LOSS (dB) INSERTION LOSS (dB) -10 INSERTION LOSS (dB) FILTERS - TUNABLE - SMT 0 8 10 12 14 0 2 4 6 8 10 12 14 Vfctl (V) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC890LP5E v01.0310 FILTER - TUNABLE, BAND PASS SMT 1 - 2 GHz 3 dB Bandwidth vs. Temperature, Vfctl = Vbwctl Maximum Return Loss in a 2 dB Bandwidth vs. Temperature, Vfctl = Vbwctl 20 +25C +85C -40C -4 RETURN LOSS (dB) 12 8 +25C +85C -40C -6 -8 -10 -12 -14 TE BANDWIDTH (%) 16 4 -16 -18 0 -20 0 2 4 6 8 10 12 14 0 Vfctl (V) 4 6 8 10 12 14 Vfctl (V) 1 High Side Rejection Ratio vs. Temperature, Vfctl = Vbwctl [1] LE Low Side Rejection Ratio vs. Temperature, Vfctl = Vbwctl [1] 0.9 0.8 +25C +85C -40C 0.7 0.6 0.5 0 2 4 6 8 10 12 F20dB To Fcenter RATIO 1.5 B SO F20dB TO Fcenter RATIO 2 1.3 1.2 1.1 1 14 0 2 4 6 Vfctl (V) Tuning Sensitivity vs. Temperature, Vfctl = Vbwctl 10 12 14 O Group Delay 140 7 120 6 GROUP DELAY (ns) 8 100 80 +25C +85C -40C 40 8 Vfctl (V) 160 60 +25C +85C -40C 1.4 FILTERS - TUNABLE - SMT 0 -2 SENSITIVITY (MHz/V) 3 0V 5 7V 4 14V 3 2 1 20 0 0 2 4 6 Vfctl (V) 8 10 12 14 0 0.5 1 1.5 FREQUENCY (GHz) 2 2.5 [1] Rejection ratio is defined as the ratio of the frequency at which the relative insertion loss is 20 dB to center Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 3-4 HMC890LP5E v01.0310 FILTER - TUNABLE, BAND PASS SMT 1 - 2 GHz 3 3 dB Bandwidth vs. Bandwidth Control Insertion Loss vs. Bandwidth Control 0 Vbwctl=Vfctl-3V Vbwctl=Vfctl-3V INSERTION LOSS (dB) Vfctl=Vbwctl 12 8 Vbwctl=Vfctl+3V 4 -5 Vfctl=Vbwctl -10 -15 Vbwctl=Vfctl+3V TE BANDWIDTH (%) 16 -20 0 -25 0 2 4 6 8 10 12 14 0 Vfctl (V) 2 4 6 8 10 12 14 Vfctl (V) High Side Rejection Ratio vs. Bandwidth Control [1] LE Low Side Rejection Ratio vs. Bandwidth Control [1] 1.5 Vbwctl=Vfctl+3V 0.8 B SO 0.9 Vbwctl=Vfctl-3V Vfctl=Vbwctl 0.7 0.6 0.5 0 2 4 6 8 10 12 F20dB TO Fcenter RATIO 1 F20dB TO Fcenter RATIO FILTERS - TUNABLE - SMT 20 1.4 Vfctl=Vbwctl 1.2 1.1 Vbwctl=Vfctl+3V 1 14 0 2 4 Vfctl (V) 6 8 10 12 14 Vfctl (V) Maximum Return Loss in a 2 dB Bandwidth vs. Bandwidth Control 0 Vbwctl=Vfctl-3V Vfctl=Vbwctl -5 RETURN LOSS (dB) O Vbwctl=Vfctl-3V 1.3 -10 -15 Vbwctl=Vfctl+3V -20 -25 0 2 4 6 8 10 12 14 Vfctl (V) [1] Rejection ratio is defined as the ratio of the frequency at which the relative insertion loss is 20 dB to center 3-5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC890LP5E v01.0310 FILTER - TUNABLE, BAND PASS SMT 1 - 2 GHz Frequency Control Voltage (Vfctl) -0.5 to +15V Bandwidth Control Voltage (Vbwctl) -0.5 to +15V RF Power Input 27 dBm Storage Temperature -65 to +150 C ESD Rating (HBM) Class 1B Junction Temperature to Maintain 1 Million Hour MTTF 150 C Nominal Junction Temperature (T= 85 C and Pin = 10 dBm) 90 C Operating Temperature -40 to +85 C O B SO LE TE ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing 3 Reliability Information FILTERS - TUNABLE - SMT Absolute Maximum Ratings NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. Pin BURR LENGTH SHALL BE 0.15mm MAXIMUM. Pin BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish HMC890LP5E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL Rating MSL1 [2] Package Marking [1] H890 XXXX [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 C Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 3-6 HMC890LP5E v01.0310 FILTER - TUNABLE, BAND PASS SMT 1 - 2 GHz Pin Descriptions Description 1 - 4, 7 - 11, 13 15 - 18, 21 - 32 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 5, 20 GND These pins and exposed paddle must be connected to RF/DC ground. 6 RFIN This pin is DC coupled and matched to 50 Ohms. External voltage must not be applied to this pin. 12 Vfctl 14 Vbwctl Interface Schematic TE Function LE Pin Number Center frequency control voltage. Bandwidth control voltage. B SO FILTERS - TUNABLE - SMT 3 19 RFOUT This pin is DC coupled and matched to 50 Ohms. External voltage must not be applied to this pin. O Application Circuit 3-7 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC890LP5E v01.0310 FILTER - TUNABLE, BAND PASS SMT 1 - 2 GHz TE LE B SO FILTERS - TUNABLE - SMT 3 Evaluation PCB O List of Materials for Evaluation PCB 128531 [1] Item Description J1 - J4 SMA - SRI C1, C2 100 pF Capacitor, 0402 Pkg. U1 HMC890LP5E Filter PCB [2] 127338 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR or Rogers 25FR The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohms impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 3-8 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC890LP5E 128531-HMC890LP5E HMC890LP5ETR