CWR06 Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT(R) Military, Surface Mount MIL-PRF-55365/4 Qualified FEATURES * Weibull Failure Rates B, C, D Exponential M, P, R, S * Tape and Reel available per EIA 481-1 and -2 * Termination finishes available; Gold Plate, 50 inch minimum (standard), Solder Plated Hot Solder Dipped PERFORMANCE CHARACTERISTICS Pb-free Available RoHS* COMPLIANT Capacitace Range: 0.10 F - 100 F Capacitance Tolerance: 10 %, 20 % standard 5 % available as special Voltage Rating: 4 WVDC to 50 WVDC Operating Temperature: - 55 C to + 85 C (To + 125 C with voltage derating) Note: Refer to Doc. 40088 ORDERING INFORMATION CWR06 TYPE D VOLTAGE C=4V D=6V F = 10V H = 15 V J = 20 V K = 25 V M = 35 V N = 50 V B TERMINATION FINISH B = Gold - Standard (RoHS compliant) H = Solder Plate C = Solder Dipped 155 CAPACITANCE This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. K CAPACITANCE TOLERANCE K = 10 % M = 20 % J=5% B FAILURE RATE %/1000 HOURS A = Commercial M = 1.0 P = 0.1 R = 0.01 S = 0.001 B = 0.1 C = 0.01 D = 0.001** OPTIONAL SURGE CURRENT OPTIONS A = 10 Cycles at + 25 C B = 10 Cycles at - 55 C and + 85 C C = 10 Cycles at - 55 C and + 85 C (Before Weibull Grading) DIMENSIONS in inches [millimeters] - + W L A B C D E F G H L H T1 P P CASE CODE W H T1 + Weld and Dimple Projection Identifies Anode (+) Terminal P L 0.100 0.015 [2.54 0.38] 0.150 0.015 [3.81 0.38] 0.200 0.015 [5.08 0.38] 0.150 0.015 [3.81 0.38] 0.200 0.015 [5.08 0.38] 0.220 0.015 [5.59 0.38] 0.265 0.015 [6.73 0.38] 0.285 0.015 [7.24 0.38] P T2 MAX. T2 MAX. W 0.050 0.015 [1.27 0.38] 0.050 0.015 [1.27 0.38] 0.050 0.015 [1.27 0.38] 0.100 0.015 [2.54 0.38] 0.100 0.015 [2.54 0.38] 0.135 0.015 [3.43 0.38] 0.110 0.015 [2.79 0.38] 0.150 0.015 [3.81 0.38] H 0.050 0.015 [1.27 0.38] 0.050 0.015 [1.27 0.38] 0.050 0.015 [1.27 0.38] 0.050 0.015 [1.27 0.38] 0.050 0.015 [1.27 0.38] 0.070 0.015 [1.78 0.38] 0.110 0.015 [2.79 0.38] 0.110 0.015 [2.79 0.38] P 0.030 0.005 [0.76 0.13] 0.030 0.005 [0.76 0.13] 0.030 0.005 [0.76 0.13] 0.030 0.005 [0.76 0.13] 0.030 0.005 [0.76 0.13] 0.030 0.005 [0.76 0.13] 0.050 0.005 [1.27 0.13] 0.050 0.005 [1.27 0.13] T1 0.005 [0.13] 0.005 [0.13] 0.005 [0.13] 0.005 [0.13] 0.005 [0.13] 0.005 [0.13] 0.005 [0.13] 0.005 [0.13] T2 (MAX.) 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] Notes When solder coated terminations are required, add 0.015" [0.38mm] to termination dimension tolerances. ** Contact marketing for availability of Weibull D FR on 50 V ratings * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 154 For technical questions, contact: tantalum@vishay.com Document Number: 40009 Revision: 09-May-07 CWR06 Solid Tantalum Chip Capacitors TANTAMOUNT(R) Military, Surface Mount MIL-PRF-55365/4 Qualified Vishay Sprague RATINGS AND CASE CODES F 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 4V 6V* 10 V 15 V 20 V 25 V 35 V A A A B B C D E A A A A B C D E B C D E B C D E B C D E F F F G H G H G H G H G H F G H F G G H F F B C D E B C D E 50 V A A B B C D E F F G H STANDARD RATINGS CAPACITANCE (F) CASE CODE MAX. DCL (A) AT PART NUMBER* + 25 C + 85 C MAX. DF (%) AT + 85 C + 125 C + 25 C + 125 C 4 WVDC AT + 85 C, SURGE = 5 V . . . 2.7 WVDC AT + 125 C, SURGE = 3.4 V CWR06C at 225#* 1.0 10 12 6 8 CWR06C at 475#* 1.0 10 12 6 8 CWR06C at 685#* 1.0 10 12 6 8 CWR06C at 106#* 1.0 10 12 8 8 CWR06C at 156#* 1.0 10 12 8 10 CWR06C at 336#* 2.0 20 24 8 10 CWR06C at 686#* 3.0 30 36 10 12 CWR06C at 107#* 4.0 40 48 10 12 6 WVDC AT + 85 C, SURGE = 8 V . . . 4 WVDC AT + 125 C, SURGE = 5 V 1.5 A CWR06D at 155#* 1.0 10 12 6 8 3.3 B CWR06D at 335#* 1.0 10 12 6 8 4.7 C CWR06D at 475#* 1.0 10 12 6 8 6.8 D CWR06D at 685#* 1.0 10 12 6 8 10 E CWR06D at 106#* 1.0 10 12 8 10 22 F CWR06D at 226#* 2.0 20 24 8 10 47 G CWR06D at 476#* 3.0 30 36 10 12 68 H CWR06D at 686#* 4.0 40 48 10 12 10 WVDC AT + 85 C, SURGE = 13 V . . . 7 WVDC AT + 125 C, SURGE = 9 V 1.0 A CWR06F at 105#* 1.0 10 12 6 8 2.2 B CWR06F at 225#* 1.0 10 12 6 8 3.3 C CWR06F at 335#* 1.0 10 12 6 8 4.7 D CWR06F at 475#* 1.0 10 12 6 8 6.8 E CWR06F at 685#* 1.0 10 12 6 8 15 F CWR06F at 156#* 2.0 20 24 8 8 33 G CWR06F at 336#* 3.0 30 36 10 12 47 H CWR06F at 476#* 5.0 50 60 10 12 at = Termination Finish: B = Gold (standard), H = solder Plated, C = Hot solder dipped 2.2 4.7 6.8 10 15 33 68 100 A B C D E F G H - 55 C MAX. ESR AT + 25 C 100 kHz (Ohms) 8 8 8 10 12 12 12 12 8.0 8.0 5.5 4.0 3.5 2.2 1.1 0.9 8 8 8 8 12 12 12 12 8.0 8.0 5.5 4.5 3.5 2.2 1.1 0.9 8 8 8 8 8 10 12 12 12.0 8.0 5.5 4.5 3.5 2.5 1.1 0.9 # = Cap.Tolerance: J = 5 %, K = 10 %, M = 20 %. * = Failure Rate B, C, D Weibull M, P, R, S Exponential Document Number: 40009 Revision: 09-May-07 For technical questions, contact: tantalum@vishay.com www.vishay.com 155 CWR06 Solid Tantalum Chip Capacitors TANTAMOUNT(R) Military, Surface Mount MIL-PRF-55365/4 Qualified Vishay Sprague STANDARD RATINGS MAX. DCL (A) AT CAPACITANCE (F) CASE CODE PART NUMBER* + 25 C + 85 C MAX. DF (%) AT + 85 C + 125 C + 25 C + 125 C 15 WVDC AT + 85 C, SURGE = 20 V . . . 10 WVDC AT + 125 C, SURGE = 12 V CWR06H at 684#* 1.0 10 12 6 8 CWR06H at 155#* 1.0 10 12 6 8 CWR06H at 225#* 1.0 10 12 6 8 CWR06H at 335#* 1.0 10 12 6 8 CWR06H at 475#* 1.0 10 12 6 8 CWR06H at 106#* 2.0 20 24 6 8 CWR06H at 226#* 4.0 40 48 8 8 CWR06H at 336#* 5.0 50 60 8 8 20 WVDC AT + 85 C, SURGE = 26 V . . . 13 WVDC AT + 125 C, SURGE = 16 V 0.47 A CWR06J at 474#* 1.0 10 12 6 8 0.68 B CWR06J at 684#* 1.0 10 12 6 8 1.0 B CWR06J at 105#* 1.0 10 12 6 8 1.5 C CWR06J at 155#* 1.0 10 12 6 8 2.2 D CWR06J at 225#* 1.0 10 12 6 8 3.3 E CWR06J at 335#* 1.0 10 12 6 8 6.8 F CWR06J at 685#* 2.0 20 24 6 8 15 G CWR06J at 156#* 3.0 30 36 6 8 22 H CWR06J at 226#* 4.0 40 48 6 8 25 WVDC AT + 85 C, SURGE = 32 V . . . 17 WVDC AT + 125 C, SURGE = 20 V 0.33 A CWR06K at 334#* 1.0 10 12 6 8 0.68 B CWR06K at 684#* 1.0 10 12 6 8 1.0 C CWR06K at 105#* 1.0 10 12 6 8 1.5 D CWR06K at 155#* 1.0 10 12 6 8 2.2 E CWR06K at 225#* 1.0 10 12 6 8 4.7 F CWR06K at 475#* 2.0 20 24 6 8 6.8 G CWR06K at 685#* 2.0 20 24 6 8 10 G CWR06K at 106#* 3.0 30 36 6 8 15 H CWR06K at 156#* 4.0 40 48 6 8 35 WVDC AT + 85 C, SURGE = 46 V . . . 23 WVDC AT + 125 C, SURGE = 28 V 0.22 A CWR06M at 224#* 1.0 10 12 6 8 0.47 B CWR06M at 474#* 1.0 10 12 6 8 0.68 C CWR06M at 684#* 1.0 10 12 6 8 1.0 D CWR06M at 105#* 1.0 10 12 6 8 1.5 E CWR06M at 155#* 1.0 10 12 6 8 3.3 F CWR06M at 335#* 1.0 10 12 6 8 4.7 G CWR06M at 475#* 2.0 20 24 6 8 6.8 H CWR06M at 685#* 3.0 30 36 6 8 50 WVDC AT + 85 C, SURGE = 65 V . . . 33 WVDC AT + 125 C, SURGE = 38 V 0.10 A CWR06N at 104#* 1.0 10 12 6 8 0.15 A CWR06N at 154#* 1.0 10 12 6 8 0.22 B CWR06N at 224#* 1.0 10 12 6 8 0.33 B CWR06N at 334#* 1.0 10 12 6 8 0.47 C CWR06N at 474#* 1.0 10 12 6 8 0.68 D CWR06N at 684#* 1.0 10 12 6 8 1.0 E CWR06N at 105#* 1.0 10 12 6 8 1.5 F CWR06N at 155#* 1.0 10 12 6 8 2.2 F CWR06N at 225#* 2.0 20 24 6 8 3.3 G CWR06N at 335#* 2.0 20 24 6 8 4.7 H CWR06N at 475#* 3.0 30 36 6 8 at = Termination Finish: B = Gold (standard), H = solder Plated, C = Hot solder dipped 0.68 1.5 2.2 3.3 4.7 10 22 33 A B C D E F G H - 55 C MAX. ESR AT + 25 C 100 kHz (Ohms) 8 8 8 8 8 8 10 10 12.0 8.0 5.5 5.0 4.0 2.5 1.1 0.9 8 8 8 8 8 8 8 8 8 16.0 14.0 12.0 6.0 5.0 4.0 2.4 1.1 0.9 8 8 8 8 8 8 8 8 8 15.0 10.0 6.5 6.5 3.5 2.5 1.2 1.4 1.0 8 8 8 8 8 8 8 8 24.0 17.0 10.0 6.5 4.5 2.5 1.5 1.3 8 8 8 8 8 8 8 8 8 8 8 75.0 25.0 17.0 12.0 8.0 7.0 6.0 4.0 2.5 2.0 1.5 # = Cap.Tolerance: J = 5 %, K = 10 %, M = 20 % * = Failure Rate B, C, D Weibull M, P, R, S Exponential www.vishay.com 156 For technical questions, contact: tantalum@vishay.com Document Number: 40009 Revision: 09-May-07 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1