3M™Trizact™Lapping Film 162XA
Product Description
Structured, fixed abrasive compositi ve film consisting of
inorganic particles in an organic binder capable of lapping
soft materials with a Mohs hardness of < 3 on va ried
equipment and processes. 3M™ Trizact™ Lapping Film
162XA is also suitable for wiping and cleaning surfaces
with Mohs hardness of > 3.
Typical Physical Properties
Note: The following technical information and data should
be considered representative or typical only and
should not be used for specification purposes.
3
Key Features
• Removes soft metal asperties without embedding
Inorganic particle size:
99- 100% finer than 46.0 microns
4 - 8% finer than 2.0 microns
Mohs hardness of inorganic particles is 3.0.
Available Dimensions
The standard dimensions are 3.25 mm width x 150 ft.
length x 3 in. core.
Available in different widths by special request.
Technical Data September, 2007
Storage and Shelf Life
Recommended Storage Conditions:
Temperature 50 - 90°F (10 - 32°C)
Relative humidity 30 - 70%
(There is no degradation with time. It is recommended
that product be used within 24 months of purchase.)
For Additional Information
To request additional product information or to arrange for
sales assistance, call toll free 1-800-251-8634. Address
correspondence to: 3M Electronics Markets Materials
Division, Building 21-1W-10, 900 Bush Avenue, St. Paul,
MN 55144-1000. Our fax number is 651-778-4244 or
1-877-369-2923.
In Canada, phone: 1-800-364-3577.
In Puerto Rico, phone: 1-787-750-3000.
In Mexico, phone: 52-70-04-00.
Precautionary Information
Refer to Product Label and Material Safety Data Sheet for
Health and Safety Information before using this product.
For additional health and safety information, call
1-800-364-3577 or (651) 737-6501.
3M™Trizact™Lapping Film 162XA
3
Important Notice
Before using this product, you must evaluate it and
determine if it is suitable for your intended application.
You assume all risks and liability associated with such use.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture at the time of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. If this product is defective
within the warranty period stated above, your exclusive
remedy shall be, at 3M’s option, to replace or repair the
3M product or refund the purchase price of the 3M
product. Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or
consequential loss or damage arising from this 3M
product, regardless of the legal theory asserted.
3M and Trizact are trademarks of 3M Company.
Please recycle. Printed in U.S.A.
©3M 2007. All rights reserved.
60-5002-0176-3
3
Electronics Markets Materials Division
3M Electronics
3M Center, Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55144-1000
1-800-251-8634 phone
651-778-4244 fax
www.3M.com/electronics
