RN2961FS~RN2966FS TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT process) (Bias Resistor built-in Transistor) RN2961FS,RN2962FS,RN2963FS RN2964FS,RN2965FS,RN2966FS Switching, Inverter Circuit, Interface Circuit and Driver Circuit Applications Unit: mm 1.00.05 Incorporating a bias resistor into a transistor reduces parts count. Reducing the parts count enable the manufacture of ever more compact equipment and save assembly cost. Complementary to RN1961FS~RN1966FS R2 B R1 E 2 5 3 4 0.48 Equivalent Circuit and Bias Resistor Values C 6 +0.02 -0.04 * 1 0.10.05 * 1.00.05 package. 0.35 0.35 Two devices are incorporated into a fine pitch Small Mold (6 pin) 0.70.05 * 0.10.05 Type No. R1 (k) R2 (k) RN2961FS 4.7 4.7 RN2962FS 10 10 RN2963FS 22 22 RN2964FS 47 47 RN2965FS 2.2 RN2966FS 4.7 fS6 0.150.05 0.80.05 0.10.05 (E1) (E2) (B2) (C2) (B1) (C1) 1.EMIITTER1 2.EMITTER2 3.BASE2 4.COLLECTOR2 5.BASE1 6.COLLECTOR1 JEDEC 47 JEITA 47 TOSHIBA 2-1F1C Weight: 0.001 g (typ.) Equivalent Circuit Absolute Maximum Ratings (Ta = 25C) (Q1, Q2 common) (top view) Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage RN2961FS~2966FS RN2961FS~2964FS RN2965FS, 2966FS Collector current Collector power dissipation Junction temperature Storage temperature range Note: Symbol Rating Unit VCBO -20 V VCEO -20 V VEBO -5 mA 50 mW Tj 150 C Tstg -55~150 C PC (Note 1) 5 4 Q2 Q1 V -50 IC RN2961FS~2966FS -10 6 1 2 3 Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Total rating 1 2007-11-01 RN2961FS~RN2966FS Electrical Characteristics (Ta = 25C) (Q1, Q2 common) Characteristics Collector cut-off current Symbol Test Condition -100 ICEO VCE = -20 V, IB = 0 -500 -0.89 -1.33 -0.41 -0.63 -0.18 -0.29 -0.088 -0.133 -0.085 -0.127 -0.08 -0.121 RN2961FS 30 RN2962FS 60 100 120 RN2965FS 120 RN2966FS 120 -0.15 RN2961FS -1.0 -2.0 RN2962FS -1.0 -2.2 -1.1 -2.7 -1.2 -3.6 RN2965FS -0.6 -1.1 RN2966FS -0.6 -1.2 -0.8 -1.5 -0.4 -0.8 1.2 RN2961FS 3.76 4.7 5.64 RN2962FS 8 10 12 17.6 22 26.4 37.6 47 56.4 RN2965FS 1.76 2.2 2.64 RN2966FS 3.76 4.7 5.64 RN2961FS~2964FS 0.8 1.0 1.2 RN2963FS RN2964FS VEB = -10 V, IC = 0 IEBO RN2965FS VEB = -5 V, IC = 0 RN2966FS Collector-emitter saturation voltage Input voltage (ON) Input voltage (OFF) Collector output capacitance Input resistor Resistor ratio Max VCB = -20 V, IE = 0 RN2962FS DC current gain Typ. ICBO RN2961FS~2966FS RN2961FS Emitter cut-off current Min RN2963FS RN2964FS RN2961FS~2966FS RN2963FS RN2964FS RN2961FS~2964FS RN2965FS, 2966FS RN2961FS~2966FS RN2963FS RN2964FS RN2965FS hFE VCE (sat) VI (ON) VI (OFF) Cob R1 R1/R2 RN2966FS VCE = -5 V, IC = -10 mA IC = -5 mA, IB = -0.25 mA VCE = -0.2 V, IC = -5 mA VCE = -5 V, IC = -0.1 mA VCB = -10 V, IE = 0, f = 1 MHz nA mA V V V pF k 0.0376 0.0468 0.0562 0.08 2 Unit 0.1 0.12 2007-11-01 RN2961FS~RN2966FS (Q1,Q2 common) RN2961FS RN2962FS IC - VI(ON) -10 Ta=100C 25 -1 -25 EMMITER COMMON VCE= -0.2V -0.1 -0.1 -1 -10 -10 Ta=100C 25 -1 -25 EMMITER COMMON VCE= -0.2V -0.1 -0.1 -100 -1 RN2693FS RN2694FS IC - VI(ON) COLLECTOR CURRENT IC (mA) COLLECTOR CURRENT IC (mA) -10 Ta=100C 25 -1 -25 EMMITER COMMON VCE= -0.2V -1 -10 -10 25 -1 -25 EMMITER COMMON VCE= -0.2V -0.1 -0.1 -100 -1 -10 -100 INPUT VOLTAGE VI(ON) ( V) RN2966FS IC - VI(ON) IC - VI(ON) -100 COLLECTOR CURRENT IC (mA) -100 Ta=100C -10 25 -1 -25 EMMITER COMMON VCE= -0.2V -0.1 -0.1 IC - VI(ON) Ta=100C INPUT VOLTAGE VI(ON) ( V) RN2965FS -100 -100 -100 -0.1 -0.1 -10 INPUT VOLTAGE VI(ON) ( V) INPUT VOLTAGE VI(ON) ( V) COLLECTOR CURRENT IC (mA) IC - VI(ON) -100 COLLECTOR CURRENT IC (mA) COLLECTOR CURRENT IC (mA) -100 -1 -10 Ta=100C -10 25 -1 EMMITER COMMON VCE= -0.2V -0.1 -0.1 -100 INPUT VOLTAGE VI(ON) ( V) -25 -1 -10 -100 INPUT VOLTAGE VI(ON) ( V) 3 2007-11-01 RN2961FS~RN2966FS (Q1,Q2 common) RN2961FS RN2962FS IC - VI(OFF) -10000 -1000 EMITTER COMMON VCE= -5V COLLECTOR CURRENT IC (A) COLLECTOR CURRENT IC (A) EMITTER COMMON VCE= -5V Ta=100C 25 -25 -100 -10 -0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 -1000 Ta=100C 25 -10 -0.4 -2 RN2963FS -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 -2 -1.8 -2 INPUT VOLTAGE VI(OFF) ( V) RN2964FS IC - VI(OFF) -10000 IC - VI(OFF) -10000 EMITTER COMMON VCE= -5V -1000 EMITTER COMMON VCE= -5V COLLECTOR CURRENT IC (A) COLLECTOR CURRENT IC (A) -25 -100 INPUT VOLTAGE VI(OFF) ( V) Ta=100C 25 -25 -100 -10 -0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 -1000 Ta=100C 25 -10 -0.4 -2 RN2965FS -0.6 RN2966FS IC - VI(OFF) -10000 -1 -1.2 -1.4 -1.6 COLLECTOR CURRENT IC (A) -1000 -25 25 -10 IC - VI(OFF) EMITTER COMMON VCE= -5V EMITTER COMMON VCE= -5V -100 -0.8 INPUT VOLTAGE VI(OFF) ( V) -10000 Ta=100C -25 -100 INPUT VOLTAGE VI(OFF) ( V) COLLECTOR CURRENT IC (A) IC - VI(OFF) -10000 -1000 Ta=100C -25 25 -100 -10 0 -0 -0.2 -0.4 -0.6 -0.8 -1 -1.2 INPUT VOLTAGE VI(OFF) ( V) 0 -0 -1.4 -0.2 -0.4 -0.6 -0.8 -1 -1.2 -1.4 INPUT VOLTAGE VI(OFF) ( V) 4 2007-11-01 RN2961FS~RN2966FS (Q1,Q2 common) RN2961FS RN2962FS hFE - IC hFE - IC 1000 DC CURRENT GAIN hFE DC CURRENT GAIN hFE 1000 Ta=100C 100 25 -25 10 Ta=100C 100 25 -25 EMITTER COMMON VCE= -5V EMITTER COMMON VCE= -5V 10 1 -1 -10 -1 -100 COLLECTOR CURRENT IC (mA) RN2963FS -10 -100 COLLECTOR CURRENT IC (mA) RN2964FS hFE - IC 1000 hFE - IC 1000 DC CURRENT GAIN hFE DC CURRENT GAIN hFE Ta=100C Ta=100C 25 100 -25 EMITTER COMMON VCE= -5V 25 -25 100 EMITTER COMMON VCE= -5V 10 10 -1 -10 -100 -1 COLLECTOR CURRENT IC (mA) RN2965FS -100 COLLECTOR CURRENT IC (mA) hFE - IC 1000 RN2966FS hFE - IC Ta=100C Ta=100C DC CURRENT GAIN hFE DC CURRENT GAIN hFE 1000 -10 25 -25 100 EMITTER COMMON VCE= -5V 10 25 -25 100 EMITTER COMMON VCE= -5V 10 -1 -10 -100 -1 COLLECTOR CURRENT IC (mA) -10 -100 COLLECTOR CURRENT IC (mA) 5 2007-11-01 RN2961FS~RN2966FS (Q1,Q2 common) RN2961FS RN2962FS VCE(sat) - IC EMITTER COMMON IC / IB=20 Ta=100C -100 25 -25 EMITTER COMMON IC / IB=20 Ta=100C -100 25 -25 -10 -10 -1 -10 COLLECTOR CURRENT IC (mA) RN2963FS -1 -100 -10 -100 COLLECTOR CURRENT IC (mA) RN2964FS VCE(sat) - IC VCE(sat) - IC -1000 COLLECTOR-EMITTER SATURATION VOLTAGE VCE(sat) (mV) -1000 COLLECTOR-EMITTER SATURATION VOLTAGE VCE(sat) (mV) VCE(sat) - IC -1000 COLLECTOR-EMITTER SATURATION VOLTAGE VCE(sat) (mV) COLLECTOR-EMITTER SATURATION VOLTAGE VCE(sat) (mV) -1000 EMITTER COMMON IC / IB=20 Ta=100C -100 25 -25 EMITTER COMMON IC / IB=20 -100 Ta=100C 25 -25 -10 -10 -1 -10 -1 -100 COLLECTOR CURRENT IC (mA) RN2965FS -10 -100 COLLECTOR CURRENT IC (mA) RN2966FS VCE(sat) - IC VCE(sat) - IC COLLECTER-EMITTOR SATURATION VOLTAGE VCE(sat) (mV) -1000 COLLECTOR-EMITTER SATURATION VOLTAGE VCE(sat) (mV) -1000 EMITTER COMMON IC / IB=20 Ta=100C -100 25 -25 -10 EMITTER COMMON IC / IB=20 Ta=100C -100 25 -25 -10 -1 -10 COLLECTOR CURRENT IC (mA) -100 -1 -10 -100 COLLECTOR CURRENT IC (mA) 6 2007-11-01 RN2961FS~RN2966FS Type Name Marking 6 RN2961FS 5 4 Type name K0 1 2 3 6 5 4 RN2962FS Type name K1 1 2 3 6 5 4 RN2963FS Type name K2 1 6 RN2964FS 2 5 3 4 Type name K3 1 2 3 6 5 4 RN2965FS Type name K4 1 2 3 6 5 4 Type name K5 RN2966FS 1 2 3 Handling Precaution When handling individual devices (which are not yet mounted on a circuit board), be sure that the environment is protected against electrostatic electricity. Operators should wear anti-static clothing, and containers and other objects that come into direct contact with devices should be made of anti-static materials. 7 2007-11-01 RN2961FS~RN2966FS RESTRICTIONS ON PRODUCT USE * Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 8 2007-11-01 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Toshiba: RN2961FS(TPL3) RN2962FS(TPL3) RN2963FS(TPL3) RN2964FS(TPL3) RN2965FS(TPL3) RN2966FS(TPL3)