Series 100 thru 111 DIP Jumpers FEATURES * * * * Wide Array of DIP Jumper Configurations and Wiring Possibilities Reliable, Electronically-tested Solder Connections Protective Covers Ultrasonically-welded with Strain Relief Easy Identification and Tracing with 10-color Cable GENERAL SPECIFICATIONS * HEADER BODY AND COVER: black UL 94V-0 4/6 Nylon * HEADER PINS: Brass 1/2-hard * STANDARD PIN PLATING: 10 [0.25] min. Au per MIL-G-45204 over 50 [1.27] min. Ni per QQ-N-290 * OPTIONAL PLATING: 200 [5.08] min. matte Sn per ASTM B545-97(2004)e1 over 50 [1.27mm] min. Ni per QQ-N-290; -OR- 200 [5.08] 90/10 Sn/Pb per MIL-T-10727 Type I over 50 [1.27] min. Ni per QQ-N-290 * CABLE INSULATION: UL style 2697 Polyvinyl Chloride (PVC) * CABLE LAMINATE: clear PVC, self-extinguishing* * 0.050 [1.27] PITCH CONDUCTORS: 28-AWG, 7/36-strand, tinned Cu per ASTM B 33 * 0.039 [0.99] PITCH CONDUCTORS: 26-AWG, 7/34-strand) * CABLE CURRENT RATING: 1 amp at 10C [50F] above ambient * CABLE VOLTAGE RATING: 300V * CABLE TEMPERATURE RATING: 176F [80C] * CABLE CAPACITANCE: 13.0pF/ft. [42.7pF/meter] nominal at 1MHz* * CROSSTALK: 10-ft sample, 5ns rise time with 2 lines driven; near end 4.7%; far end 4.3% nominal* * PROPAGATION DELAY: 1.5ns/ft. [4.9ns/meter] nominal* * INSULATION RESISTANCE: 1010 (10 ft. [3 meters] min.) ORDERING INFORMATION XX-XXXX-XXX XXX Optional Header Pin Plating T = Sn TL = Sn/Pb ST = Stripped, Sn-dipped (106-111 Series) STL = Stripped & Sn/Pb dipped ends (Series 106-111) Jumper Series Cable Length (inches) 2" = .002 (min.) [50.88] 2.5" = 002.5 No. of Conductors (see Table) MOUNTING CONSIDERATIONS * SUGGESTED PCB HOLE SIZE: 0.033 0.002 [0.86 0.05] dia. * Applies to 0.050 [1.27] Pitch Cable Only SINGLE-END DIP JUMPER WIRE LIST Series 106, 108, 110 Wire Number Header Pin Number Wire Number Header Pin Number 1 1 1 1 2 8 2 2 3 2 3 3 4 7 4 4 NUMBER OF CONDUCTORS Available Sizes Series 107, 109, 111 Centers "C" Dim. "D" 5 3 5 5 4 thru 20 0.300 [7.62] 0.395 [10.03] 6 6 6 6 22 0.400 [10.16] 0.495 [12.57] 7 4 7 7 24, 28, 40 0.600 [15.24] 0.695 [17.65] 8 5 8 8 ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: 0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road * Bristol, PA 19007-6810 USA TEL 215-781-9956 * FAX 215-781-9845 WWW.ARIESELEC.COM * INFO@ARIESELEC.COM 11006 Rev. 8.4 1 of 2 Series 100 thru 111 DIP Jumpers ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: 0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road * Bristol, PA 19007-6810 USA TEL 215-781-9956 * FAX 215-781-9845 WWW.ARIESELEC.COM * INFO@ARIESELEC.COM 11006 Rev. 8.4 2 of 2