UCOM-10G+ LCUB - Amphenol PCD

µCom-10Gb +

Harsh Environment 10Gb

Ethernet Micro Connectors

15mm

Amphenol

Socapex

www.amphenol-socapex.com

µCom-Series is a new range of connectors designed to address the latest trends of the industry :

miniaturization and high speed, with the highest resistance for use in the harshest environments.

µCom-10Gb + is the rst product of this new range.

10Gb+ exceeds 10Gb/s Ethernet following IEEE 802.3an-2006: 10GBase-T

Cat.6A connector according to TIA568C.2 and ISO/IEC11801 standard

Environmental testing based on MIL-DTL-38999 series III military specications

Miniature : 15 mm(.59˝) max external diameter

4 pairs totally insulated throughout the connector

 minimum cross-talk between the four pairs

Patent pending special interfacial shapes

 minimum perturbation at the interface of each

pair

Thread coupling mechanism

 2000 mating cycles & high vibration resistance

Machined Brass shells and RoHS compliant plating

 shell to shell continuity and 500h salt spray

resistance

Machined & gold plated Solder and Crimp contacts

 design & performance according to the innercon-

tact of M39029/77-429#16 M39029/76-425#16 38999

contact

Solder contact : max AWG24

Crimp contact : AWG 24 to 26

IP68 sealing mated and unmated for receptacles

1500 Vrms Dielectric Withstanding voltage

Temperature range : - 55°C / + 125°C

DEFENSE : C4ISR, Battleeld Communications, Shipboard, Ground Vehicles Vetronics.

AERONAUTICAL : In Flight Entertainment, Avionics, Communication Systems.

RAIL MASS TRANSIT : Passenger Information Systems, Communication Systems.

MAIN FEATURES

MARKETS & APPLICATIONS

FEATURES AND BENEFITS

µCom-10Gb + Amphenol

Socapex

Amphenol performance

IEEE 802.3 an Standard requirement

Amphenol performance

IEEE 802.3an Standard requirement

Amphenol performance

IEEE 802.3an Standard requirement

Amphenol performance

TRANSMISSION DATA

Next 1-2

Insertion loss

Return loss

Exceeds

10Gb/s

Ethernet

requirement

√

µCom-10Gb + Amphenol

Socapex

UCOM - 10G+ R P B

Shell

R: receptacle (push pull or thread)

Contacts termination

P: PCB

S: solder

C: crimp

Shell plating

B: black nickel

G: olive drab cadmium

U: unplated brass

NOTA:

• UCOM for order designation

• μCom for marking on connectors

FEMALE RECEPTACLES

Female receptacle for printed circuit board

Panel mount female receptacle with metallic band backshell

HOW TO ORDER Female receptacles

Part number: UCOM-10G+ R P x

x: see the 'How to order' below to complete your part number

Part number: UCOM-10G+ R x x

x: see the 'How to order' below to complete your part number

µCom-10Gb + Amphenol

Socapex

Plug with cable gland backshell

Plug with metallic band backshell

UCOM - 10G+ P T C B G A

Shell

P: plug

Mating (for plugs only)

T: thread

Contacts termination

C: crimp

S: solder

Shell plating

B: black nickel

G: olive drab cadmium

U: unplated brass

Backshell type

G: gland

B: band

Cable diameter (for gland backshell only)

A: for cable diam 7.5mm

B: to be dened

NOTA:

• UCOM for order designation

• μCom for marking on connectors

MALE PLUGS

HOW TO ORDER Male plugs

Part number: UCOM-10G+ P T x x G x

x: see the 'How to order' below to complete your part number

Part number: UCOM-10G+ P T x x B

x: see the 'How to order' below to complete your part number

µCom-10Gb + Amphenol

Socapex

UCOM - 10G+ L S B G A

Shell

L: in line receptacle

Contacts termination

C: crimp

S: solder

Shell plating

B: black nickel

G: olive drab cadmium

U: unplated brass

Backshell type

G: gland

B: band

Cable diameter (for gland backshell only)

A: for cable diam 7.5mm

B: to be dened

NOTA:

• UCOM for order designation

• μCom for marking on connectors

Female in-line receptacle with cable gland backshell

Female in-line receptacle with metallic band backshell

FEMALE IN-LINE RECEPTACLES

HOW TO ORDER Female in-line receptacles

Part number: UCOM-10G+ L x x G x

x: see the 'How to order' below to complete your part number

Part number: UCOM-10G+ L x x B

x: see the 'How to order' below to complete your part number

µCom-10Gb + Amphenol

Socapex

µCom plug - µCom plug cordset

CORDSETS

µCom plug - RJ45 plug cordset

µCom panel mount receptacle - RJ45 plug

Part number:

UCOM-10G+ C x x x xxx

x: see the 'How to order' on the

next page to complete your part

number

Part number:

UCOM-10G+ D x x x xxx

x: see the 'How to order' on the

next page to complete your part

number

Part number:

UCOM-10G+ E x x xxx

x: see the 'How to order' on the

next page to complete your part

number

µCom-10Gb + Amphenol

Socapex

Type of cable used: CAT 7 HFFR - According to EN 50288-4-2

• Stranded bare copper wire (26 AWG)

• 4 screened twisted pairs: 2 wires twisted to a pair, Alulami-

nate foil overlapped

• Shield braiding of tinned copper wires, about 80% coverage

• Strain member of Kevlar

• Jacket in black Polyurethane (PUR), glossy nish,

acc to DIN VDE 0282

• External diameter 7.0 +/-0.3 mm

• UV & Hydrolysis resistant, Halogen free, RoHS compliant

• Max Pull force: 800 N, Weight : about 54 kg/km

• Temperature : - 40°C / + 85°C

UCOM - 10G+ C T C B 0 1 5

Shell

C: µCom plug - µCom plug cordset

D: µCom plug - RJ45 plug cordset

E: µCom panel mount receptacle - RJ45 plug cordset

F: µCom plug - µCom inline receptacle cordset

Open versions:

G: µCom plug - no connector at the end

H: µCom panel mount receptacle - no connector at the end

J: µCom inline receptacle - no connector at the end

Mating (for plugs only)

T: thread

Contacts termination

C: crimp

S: solder

Shell plating

B: black nickel

G: olive drab cadmium

U: unplated brass

Total length - For other lengths, please consult us

005: 50 cm [19.68]

010: 1.0 m [39.37]

015: 1.5 m [59.05]

020: 2.0 m [78.74]

050: 5.0 m [196.85]

100: 10.0 m [393.70]

NOTA:

• UCOM for order

designation

• μCom for marking

on connectors

HOW TO ORDER Cordsets

µCom plug - µCom inline receptacle

Part number:

UCOM-10G+ F x x x xxx

x: see the 'How to order' below

to complete your part number

µCom-10Gb + Amphenol

Socapex

The information contained in this document should be used as a guideline only.

We reserve the right to modify our products in any way we deem necessary.

Any duplication is prohibited, unless approved in writing.

Edited by AMPHENOL SOCAPEX - October 10, 2013.

For more information, you can contact us on

our website www.amphenol-socapex.com

or by calling on +33 (0)4 50 89 28 00.

DOC-000015-ANG

ACCESSORIES

CAPS for receptacles

IP68 metallic cap

Part number: 31057 x

x to be replaced by

B for Black nickel plating

G for Olive drab cadmium plating

U for Unplated brass

IP68 neoprene cap - Part number: 31091

Nota: plan a type M3 hole on the panel

CAPS for plugs

Cap in neoprene

Part number: 31092

Dummy female receptacleCAPS for in line receptacles

Cap in neoprene

Part number: 31093

TOOLS

Nut clamping tool for receptacle

Part number: 31055

Insertion tool for crimp contacts

Part number: 31056

Contact positioner

for M22520/2-01 crimping tool

Part number: 31095

Part number: 31131 x

x to be replaced by

B for Black nickel plating

G for Olive drab cadmium plating

U for Unplated brass

Brazing tool for receptacle

Part number: 31132

Brazing tool for plug

Part number: 31133

Other tools: