RJ point five CONNECTOR SYSTEM Quick Reference Guide TE Connectivity's (TE) next-generation Ethernet link, the RJ point five connector, offers higher density cabling solutions for Original Equipment Manufacturers (OEMs) who desire a competitive total cost of ownership per port-while maintaining the granularity of a single connector per channel. The port spacing is on a 7mm centerline, occupying half the space of a traditional RJ45 Ethernet link. In addition to the high-density receptacle, TE offers the mating cable assembly along with cable management solutions for single-box and rack configurations. The receptacle and cable assembly were redesigned to eliminate the undesirable RJ45 split-pair configuration, which leads to heightened electrical performance. Additionally, the latching feature incorporates an easy-to-use lanyard that facilitates up to 96 ports on a single line card. Due to the density on the receptacle face, the light from the LEDs is transferred out through the cable boot, bringing the port indicator light closer to the end user. FEATURES AND BENEFITS * * * * * * * * Approximately double the density offered over the standard RJ45 Ethernet link Receptacle is a modular design to allow for easy and rapid deployment of product extensions Lower total cost of ownership per port Offers field installations on cable assemblies, providing an option vs. factory terminated solutions Doubles density of gigabit ports in the same real estate; increases network capacity 100% Cable assemblies capable of field termination Cable management features available from for higher density configurations Product supports Gigabit speeds of Cat5e U/UTP and Cat5e F/UTP stranded (tinned) cable DATA AND DEVICES /// RJ point five CONNECTOR SYSTEM RJ point five Connector System Product Applications Mechanical * High density Ethernet switching/routing products * Data center switching applications: * Top-of-rack * End-of-row * Mid-row * Server I/O applications * Wiring closet switching products * Port center-on-center spacing at 7mm for Cat5e cabling * Overall height is 25.25mm * High-density cabling consists of ergonomically-friendly lanyard for easy extraction * Port indicator LEDs conveniently located on the cable boot to facilitate easy viewing Electrical/Optical Product meets category 5e performance for 10/100/1000BASE-T applications * Insertion loss 0.4 dB maximum at 100 MHz * Return loss 20 dB minimum at 100 MHz * NEXT loss 43 dB minimum at 100 MHz * FEXT loss 35.1 dB minimum at 100 MHz RJ point five Connector Comparison to RJ45* *Drawing not shown to scale 58.5 mm RJ point five connector 115.06 mm RJ45 RJ point five Board Mount Receptacles and Plug Kit Part Number Description Grounding Finger LEDs Product Available 2057133-1 2x8 Receptacle Yes Yes (R/G) Yes 2057133-2 2x8 Receptacle Yes Yes (Y/G) Yes 2057134-1 2x12 Receptacle Yes Yes (R/G) Yes 2057134-2 2x12 Receptacle Yes Yes (Y/G) Yes 2057131-1 2x1 Receptacle Yes Yes (R/G) Yes 2057131-2 2x1 Receptacle Yes Yes (R/G) Yes 2170129-1 1x2 Receptacle Yes * Yes 2170185-1 Plug Kit shielded -- -- Yes * has lightpipes for board mounted LEDs DATA AND DEVICES /// RJ point five CONNECTOR SYSTEM PAGE 2 RJ point five Connector System RJ point five Connector Demo Rack Demo Rack Illustrates: * 96 Port RJ point five cards * 48 Port RJ45 patch panels * AMPTRAC intelligent infrastructure management system * AMP NETCONNECT Hi-D cable management * RJ point five connector to RJ45 jumper cables * Cable assembly showing LEDs through cable plug With Pull Tab PNs 2100356/357 PNs 2142758/759 Without Pull Tab PNs 2159683/684 RJ point five Cable Assembly Part Numbers RJ point five to RJ point five Cable Assembly Cat5e U/UTP AWG 24 Cat5e F/UTP AWG 26 LszH Cat5e F/UTP AWG 26 LszH (short boot) Part Number Part Number Part Number 2100356-1 2142758-1 2159683-1 2100356-2 2142758-2 2159683-2 2100356-3 2142758-3 2100356-4 RJ point five to RJ45 Cable Assembly Cat5e U/UTP AWG 24 Cat5e F/UTP AWG 26 LszH Cat5e F/UTP AWG 26 LszH (short boot) Part Number Part Number Part Number 0.5 meters 2100357-1 2142759-1 2159684-1 0.5 meters 1.0 meters 2100357-2 2142759-2 2159684-2 1.0 meters 2159683-3 1.5 meters 2100357-3 2142759-3 2159684-3 1.5 meters 2142758-4 2159683-4 2.0 meters 2100357-4 2142759-4 2159684-4 2.0 meters 2100356-5 2142758-5 2159683-5 2.5 meters 2100357-5 2142759-5 2159684-5 2.5 meters 2100356-6 2142758-6 2159683-6 3.0 meters 2100357-6 2142759-6 2159684-6 3.0 meters 2100356-7 2142758-7 2159683-7 4.0 meters 2100357-7 2142759-7 2159684-7 4.0 meters 2100356-8 2142758-8 2159683-8 5.0 meters 2100357-8 2142759-8 2159684-8 5.0 meters 2100356-9 2142758-9 2159683-9 7.5 meters 2100357-9 2142759-9 2159684-9 1-2100356-0 1-2142758-0 1-2159683-0 10.0 meters 1-2100357-0 1-2142759-0 1-2159684-0 1-2100356-1 1-2142758-1 1-2159683-1 12.5 meters 1-2100357-1 1-2142759-1 1-2159684-1 12.5 meters 1-2100356-2 1-2142758-2 1-2159683-2 15.0 meters 1-2100357-2 1-2142759-2 1-2159684-2 15.0 meters Cable Length Cable Length 7.5 meters 10.0 meters RJ point five Coupler Part Number Raw Cable Type 2159658-1 Cat5e F/UTP AWG 26 LszH Cable Length 0.25 meter 2159658-2 Cat5e F/UTP AWG 26 LszH 0.5 meter 2159658-3 Cat5e F/UTP AWG 26 LszH 1.0 meter RJ point five Connector Documentation Part Number Description 108-2341 RJ point five Product Specifications (Design Objectives) 114-13228 RJ point five Receptacle Application Sheet 114-13235 RJ point five Plug Kit Application Sheet 408-10243 Cable Assembly Termination Instruction Sheet DATA AND DEVICES /// RJ point five CONNECTOR SYSTEM RJ point five Coupler PN 2159658-* PAGE 3 For More Information te.com/products/rjpointfive Frequently Asked Questions What data rate does RJ point five product support? RJ point five product currently supports 10/100/1000BASE-T applications or GbE RJ45 product applications. What are the PCB termination options? Receptacles are offered as press fit PCB termination style. Is application tooling required? Board mount receptacle connector will be press fit (see application notes for press fit tooling), Plug requires only a hand-tool part number 2031734-1. What cable lengths are required? Cable length and wire gauge are related to the performance characteristics of the cable assembly. Longer cable lengths require heavier wire gauge, while shorter cable lengths can utilize a smaller gauge cable. Smaller gauge cable assemblies provide many benefits to the data center operator, such as ease of routing, less weight and increased airflow. What cable types does the RJ point five plug accept? The cables which can be used with this product line are CAT5e U/UTP cable with center conductors of AWG 24 stranded tinned copper and Cat5e F/UTP, SF/UTP cable with center conductors of 26 AWG stranded tinned copper, a primary insulation diameter of 0.89--0.99 mm, and a maximum cable jacket O.D. of 5.80 mm. Standardization? The RJ point five connector system; IEC, document number IEC 61076-3-121 TE Technical Support Center USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico: +52 (0) 55-1106-0800 Latin/S. America: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Part numbers in this brochure are RoHS Compliant (as defined on www.te.com/leadfree), unless marked otherwise. te.com (c) 2015 TE Connectivity Ltd. family of companies. All Rights Reserved. AMP NETCONNECT, AMPTRAC, RJ point five, TE Connectivity, TE, and TE Connectivity (logo) are trademarks of the TE Connectivity Ltd. family of companies. 3-1773454-0 DTC 05/2015 DATA AND DEVICES /// RJ point five CONNECTOR SYSTEM Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 2100357-8