DATA AND DEVICES /// R J point fi ve CONNECTOR SYSTEM
RJ point fi ve
CONNECTOR
SYSTEM
Quick Reference Guide
TE Connectivity’s (TE) next-generation Ethernet link, the RJ point fi ve connector, off ers higher density cabling
solutions for Original Equipment Manufacturers (OEMs) who desire a competitive total cost of ownership per port-
-while maintaining the granularity of a single connector per channel. The port spacing is on a 7mm centerline,
occupying half the space of a traditional RJ45 Ethernet link.
In addition to the high-density receptacle, TE off ers the mating cable assembly along with cable management
solutions for single-box and rack confi gurations. The receptacle and cable assembly were redesigned to eliminate the
undesirable RJ45 split-pair confi guration, which leads to heightened electrical performance. Additionally, the latching
feature incorporates an easy-to-use lanyard that facilitates up to 96 ports on a single line card. Due to the density on
the receptacle face, the light from the LEDs is transferred out through the cable boot, bringing the port indicator light
closer to the end user.
FEATURES AND BENEFITS
• Approximately double the density off ered over the standard RJ45 Ethernet link
• Receptacle is a modular design to allow for easy and rapid deployment of product extensions
• Lower total cost of ownership per port
• Off ers fi eld installations on cable assemblies, providing an option vs. factory terminated solutions
• Doubles density of gigabit ports in the same real estate; increases network capacity 100%
• Cable assemblies capable of fi eld termination
• Cable management features available from for higher density confi gurations
• Product supports Gigabit speeds of Cat5e U/UTP and Cat5e F/UTP stranded (tinned) cable
PAGE 2DATA AND DEVICES /// R J point five CONNECTOR SYSTEM
RJ point five Connector System
RJ point five Board Mount Receptacles and Plug Kit
Part Number Description Grounding Finger LEDs Product Available
2057133-1 2x8 Receptacle Yes Yes (R/G) Yes
2057133-2 2x8 Receptacle Ye s Yes (Y/G) Ye s
2057134-1 2x12 Receptacle Yes Yes (R/G) Yes
2057134-2 2x12 Receptacle Ye s Yes (Y/G) Ye s
2057131-1 2x1 Receptacle Yes Yes (R/G) Yes
2057131-2 2x1 Receptacle Ye s Yes (R/G) Yes
2170129-1 1x2 Receptacle Yes *Yes
2170185-1 Plug Kit shielded — — Yes
* has lightpipes for board mounted LEDs
Electrical/Optical
Product meets category 5e performance for
10/100/1000BASE-T applications
• Insertion loss 0.4 dB maximum at 100 MHz
• Return loss 20 dB minimum at 100 MHz
• NEXT loss 43 dB minimum at 100 MHz
• FEXT loss 35.1 dB minimum at 100 MHz
Mechanical
• Port center-on-center spacing at 7mm for Cat5e cabling
• Overall height is 25.25mm
• High-density cabling consists of ergonomically-friendly
lanyard for easy extraction
• Port indicator LEDs conveniently located on the cable
boot to facilitate easy viewing
Product Applications
• High density Ethernet switching/routing
products
• Data center switching applications:
• Top-of-rack
• End-of-row
• Mid-row
• Server I/O applications
• Wiring closet switching products
RJ point five Connector Comparison to RJ45*
58.5 mm
RJ point five connector
115.06 mm
RJ45
*Drawing not shown to scale
PAGE 3DATA AND DEVICES /// R J point five CONNECTOR SYSTEM
RJ point five Connector System
RJ point five Connector Documentation
Part Number Description
108-2341 RJ point five Product Specifications (Design Objectives)
114-13228 RJ point five Receptacle Application Sheet
114-13235 RJ point five Plug Kit Application Sheet
408-10243 Cable Assembly Termination Instruction Sheet
RJ point five to RJ point five Cable Assembly
Cat5e U/UTP
AWG 24
Cat5e F/UTP
AWG 26 LszH
Cat5e F/UTP
AWG 26 LszH
(short boot) Cable Length
Part Number Part Number Part Number
2100356-1 2142758-1 2159683-1 0.5 meters
2100356-2 2142758-2 2159683-2 1.0 meters
2100356-3 2142758-3 2159683-3 1.5 meters
2100356-4 2142758-4 2159683-4 2.0 meters
2100356-5 2142758-5 2159683-5 2.5 meters
2100356-6 2142758-6 2159683-6 3.0 meters
2100356-7 2142758-7 2159683-7 4.0 meters
2100356-8 2142758-8 2159683-8 5.0 meters
2100356-9 2142758-9 2159683-9 7.5 meters
1-2100356-0 1-2142758-0 1-2159683-0 10.0 meters
1-2100356-1 1-2142758-1 1-2159683-1 12.5 meters
1-2100356-2 1-2142758-2 1-2159683-2 15.0 meters
RJ point five to RJ45 Cable Assembly
Cat5e U/UTP
AWG 24
Cat5e F/UTP
AWG 26 LszH
Cat5e F/UTP
AWG 26 LszH
(short boot) Cable Length
Part Number Part Number Part Number
2100357-1 2142759-1 2159684-1 0.5 meters
2100357-2 2142759-2 2159684-2 1.0 meters
2100357-3 2142759-3 2159684-3 1.5 meters
2100357-4 2142759-4 2159684-4 2.0 meters
2100357-5 2142759-5 2159684-5 2.5 meters
2100357-6 2142759-6 2159684-6 3.0 meters
2100357-7 2142759-7 2159684-7 4.0 meters
2100357-8 2142759-8 2159684-8 5.0 meters
2100357-9 2142759-9 2159684-9 7.5 meters
1-2100357-0 1-2142759-0 1-2159684-0 10.0 meters
1-2100357-1 1-2142759-1 1-2159684-1 12.5 meters
1-2100357-2 1-2142759-2 1-2159684-2 15.0 meters
Demo Rack Illustrates:
• 96 Port RJ point five cards
• 48 Port RJ45 patch panels
• AMPTRAC intelligent infrastructure
management system
• AMP NETCONNECT Hi-D cable management
• RJ point five connector to RJ45 jumper cables
• Cable assembly showing LEDs through cable
plug
RJ point five Connector Demo Rack
RJ point five Cable Assembly Part Numbers
With Pull Tab
PNs 2100356/357
PNs 2142758/759
Without Pull Tab
PNs 2159683/684
RJ point five Coupler
Part Number Raw Cable Type Cable Length
2159658-1 Cat5e F/UTP AWG 26 LszH 0.25 meter
2159658-2 Cat5e F/UTP AWG 26 LszH 0.5 meter
2159658-3 Cat5e F/UTP AWG 26 LszH 1.0 meter
RJ point five Coupler
PN 2159658-*
DATA AND DEVICES /// R J point five CONNECTOR SYSTEM
For More Information
te.com/products/rjpointfive
Frequently Asked Questions
What data rate does RJ point five product support?
RJ point five product currently supports 10/100/1000BASE-T applications or GbE RJ45 product applications.
What are the PCB termination options?
Receptacles are oered as press fit PCB termination style.
Is application tooling required?
Board mount receptacle connector will be press fit
(see application notes for press fit tooling), Plug requires only a hand-tool part number 2031734-1.
What cable lengths are required?
Cable length and wire gauge are related to the performance characteristics of the cable assembly. Longer cable
lengths require heavier wire gauge, while shorter cable lengths can utilize a smaller gauge cable. Smaller gauge cable
assemblies provide many benefits to the data center operator, such as ease of routing, less weight and increased
airflow.
What cable types does the RJ point five plug accept?
The cables which can be used with this product line are CAT5e U/UTP cable with center conductors of AWG 24
stranded tinned copper and Cat5e F/UTP, SF/UTP cable with center conductors of 26 AWG stranded tinned copper, a
primary insulation diameter of 0.89—0.99 mm, and a maximum cable jacket O.D. of 5.80 mm.
Standardization?
The RJ point five connector system; IEC, document number IEC 61076-3-121
TE Technical Support Center
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico: +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Part numbers in this brochure are RoHS Compliant (as defined on www.te.com/leadfree), unless marked otherwise.
te.com
© 2015 TE Connectivity Ltd. family of companies. All Rights Reserved.
AMP NETCONNECT, AMPTRAC, RJ point five, TE Connectivity, TE, and TE Connectivity (logo) are trademarks of the TE Connectivity Ltd.
family of companies.
3-1773454-0 DTC 05/2015
