Anforderunqsstufe B x 5,08 = 76,2 95 max. Bestiickungsplan / contact layout 30 28 26 24 22 2 18 ee m bestiickt / assemble Leiterplatten-Lochbild / PCB drillhole pattern 5 x = (76,2) 90 Elastische Einpresszone 3,0 mm / compliant pressfit zone 30 mm lsolierwerkstoff / Aousing material : PBT GF30 Bouart 5 / type 5 Anforderungsstufe 2 = 400 Steckzyklen /performance class 2 = 400 mating cycles Fehlende Masse und Angaben nach IEC 60 603-2 / DIN EN 60 603-2 Missing information and dimensions per IEC 60 603-2 / DIN EN 60 603-2 Schichtaufbou im metallisierten Loch siehe Zeichnung 114124 diameter of drilled hole see drawing 114124 1,0 2888 Durchmesser des metallisierten Loches D 10 66 Diameter of finished plated-through hole 1,15+ 0.025 Bohrungsdurchmesser des Loches @ 1% + 0025Diameter of drilled hole Information: Tolerances <3 Al Dimensions in mm All ri reserved. Only for information, before using. Consider protection memo from DIN 34 To insure that this is the latest version of this drawing, please contact one of the ERN companies Subject to modification without Designation prior notice. Drawing will not be updated. Federleiste 0 32 EE Fem. Connector D 32 Presstit www.ERNI.com 033427 ! g [index V:00040616.SZA STVD