12-215/BHC-YLMQY/3C - Everlight Electronic Co., Ltd.

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 1 of 10

Device No : DSE-125-B07 Prepared date: 27-Oct-2007 Prepared by:Zhouhua

Technical Data Sheet

Chip LED with Right Angle Lens

12-215/BHC-YLMQY/3C

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Mono-color type.

․Pb-free.

․The product itself will remain with in RoHS compliant version.

Descriptions

․The 12-215 SMD LED is much smaller than lead

frame type components, thus enable smaller board

size, higher packing density, reduced storage space

and finally smaller equipment to be obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide Chip

Part No. Material Emitted Color Resin Color

12-215/BHC-YLMQY/3C InGaN Blue Water Clear

EVERLIGHT ELECTRONICS CO.,LTD.

12-215/BHC-YLMQY/3C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 2 of 10

Device No : DSE-125-B07 Prepared date: 27-Oct-2007 Prepared by:Zhouhua

Package Outline Dimensions

C

L

R0.5

L

C

0.51.0 0.6

1.7

2.1

0.8 1.3 0.8

0.350.9

0.3 1.5 0.3

C athode M ask

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

12-215/BHC-YLMQY/3C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 3 of 10

Device No : DSE-125-B07 Prepared date: 27-Oct-2007 Prepared by:Zhouhua

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit

Reverse Voltage VR 5 V

Forward Current IF 25 mA

Peak Forward Current

(Duty 1/10 @1KHz) IFP 100 mA

Power Dissipation Pd 110 mW

ElectrostaticDischarge(HBM) ESD 150 V

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +90 ℃

Soldering Temperature Tsol Reflow Soldering:260 ℃ for 10 sec

Hand Soldering:350℃ for 3 sec

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol Min. Typ. Max. Unit Condition

Luminous Intensity Iv 11.5 ----- 28.5

mcd

Viewing Angle 2θ1/2 ---- 130 ---- deg

Peak Wavelength λp ---- 468 ---- nm

Dominant Wavelength λd 470.0 ----- 475.0 nm

Spectrum Radiation

Bandwidth △λ ---- 35 ---- nm

Forward Voltage VF 2.70 ---- 3.20 V

IF=5mA

Reverse Current IR ---- ---- 50 μA VR=5V

Notes:

1.Tolerance of Luminous Intensity ±11%

2.Tolerance of Dominant Wavelength ±1nm

3.Tolerance of Forward Voltage ±0.05V

EVERLIGHT ELECTRONICS CO.,LTD.

12-215/BHC-YLMQY/3C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 4 of 10

Device No : DSE-125-B07 Prepared date: 27-Oct-2007 Prepared by:Zhouhua

Bin Range Of Dom. Wavelength

Group Bin Min Max Unit Condition

Y Y 470.0 475.0 nm IF=5mA

Bin Range Of Luminous Intensity

Bin Min Max Unit Condition

L 11.5 18.0

M 18.0 28.5

mcd IF=5mA

Bin Range Of Forward Voltage

Group Bin Min Max Unit Condition

29 2.70 2.80

30 2.80 2.90

31 2.90 3.00

32 3.00 3.10

Q

33 3.10

3.20

V IF=5mA

Notes:

1.Tolerance of Luminous Intensity ±11%

2.Tolerance of Dominant Wavelength ±1nm

3.Tolerance of Forward Voltage ±0.05V

EVERLIGHT ELECTRONICS CO.,LTD.

12-215/BHC-YLMQY/3C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 5 of 10

Device No : DSE-125-B07 Prepared date: 27-Oct-2007 Prepared by:Zhouhua

Typical Electro-Optical Characteristics Curves

EVERLIGHT ELECTRONICS CO.,LTD.

12-215/BHC-YLMQY/3C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 6 of 10

Device No : DSE-125-B07 Prepared date: 27-Oct-2007 Prepared by:Zhouhua

Label explanation

CAT: Luminous Intensity Rank

HUE: Dom. Wavelength Rank

REF: Forward Voltage Rank

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

12-215/BHC-YLMQY/3C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 7 of 10

Device No : DSE-125-B07 Prepared date: 27-Oct-2007 Prepared by:Zhouhua

Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Moisture Resistant Packaging

Label Desiccant Label

Aluminum moisture-proof bag

EVERLIGHT ELECTRONICS CO.,LTD.

12-215/BHC-YLMQY/3C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 8 of 10

Device No : DSE-125-B07 Prepared date: 27-Oct-2007 Prepared by:Zhouhua

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

EVERLIGHT ELECTRONICS CO.,LTD.

12-215/BHC-YLMQY/3C

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 9 of 10

Device No : DSE-125-B07 Prepared date: 27-Oct-2007 Prepared by:Zhouhua

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time of

the hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether

the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com