Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
High heat resistance, 125℃
AIchipTM-MHKSeries
・ESR : Less than MHJ
・Endurance : 2,000 hours at 125℃
・Specified ESR after endurance
・For automobile modules and other high temperature applications
・Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
・RoHS Compliant
◆SPECIFICATIONS
Items Characteristics
Category
Temperature Range -40 to +125℃
Rated Voltage Range
35Vdc
Capacitance Tolerance
±20%(M) (at 20℃, 120Hz)
Leakage Current I=0.01CV
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minute)
Dissipation Factor
(tanδ)
Rated voltage(Vdc)
35V
tanδ (Max.)
0.14
(at 20℃, 120Hz)
Low Temperature
Characteristics
(Max. impedance Ratio)
Rated voltage(Vdc)
35V
Z(-25℃)/Z(+20℃) 2
Z(-40℃)/Z(+20℃) 3 (at 120Hz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours
at 125℃.
Capacitance change ≦±30% of the initial value
D.F. (tanδ)≦300% of the initial specified value
Leakage current ≦The initial specified value
ESR
（Ω max./-40℃, 400kHz）
6.0
Shelf life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change ≦±30% of the initial value
D.F. (tanδ)≦300% of the initial specified value
Leakage current ≦The initial specified value
◆DIMENSIONS [mm]
Size code
F80
D
6.3
L
7.7
A
6.6
B
6.6
C
7.2
W
0.5 to 0.8
P
1.9
φD±0.5
L±0.3
0.3max.
A±0.2
W
C±0.2
B±0.2
P
● Size code : F80
●
Terminal Code : A
◆PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47µF:470,100µF:101)
Taping code
Terminal code
Voltage code (ex.35V:350)
Series code
Category
E M H K 3 5 0 D AA GM
Please refer to "Product code guide (surface mount type)"
08F
New!
MHK
Lower ESR
MHJ P116
◆MARKING
3A
47
V
HK
EX) 35V47µF
Rated voltage (V
dc
)
35
Symbol
V
●
Rated voltage symbol
118 CAT. No. E1001P
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
High heat resistance, 125℃
AIchipTM-MHKSeries
◆STANDARD RATINGS
WV
(Vdc)
Cap
(µF) Size code
ESR
（Ω max./100k to 400kHz) Rated ripple current
(mArms/125℃, 100k to 400kHz)
Part No.
20℃-40℃
35 47 F80 0.30 3.0 240 EMHK350ADA470MF80G
100 F80 0.30 3.0 240 EMHK350ADA101MF80G
◆RATED RIPPLE CURRENT MULTIPLIERS
・Frequency Multipliers
Frequency(Hz)
Capacitance(µF)
120 1k 10k 100k
47 to 100 0.40 0.75 0.90 1.00
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
New!
119 CAT. No. E1001P
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
