CUBEFuse Compact Circuit Protector Base (CCPB)
For Quik–Spec™ Coordination Panelboards
Specifications:
• CCPB Ampacity rejection breaks: 15A, 20A, 30A, 40A,
50A, 60A, 70A, 90A and 100A.
• 1-, 2- and 3-Pole versions
• For systems 600Vac (or less)
• Box lug loadside terminal:
15 - 60A:
- 18-6AWG (1-16mm2) single & dual rated, solid or
stranded – 75°C, Cu only
- 4AWG (21.1mm2) single – 75°C, Cu only
100A:
- 18-1AWG (1-45mm2) single or dual rated, solid or
stranded – 75ºC or higher - Cu only
- 6AWG (16mm2) single – 75ºC or higher - Cu only
The revolutionary Cooper Bussmann CCPB with
CUBEFuse is designed as a fused branch circuit
disconnect with fuse holder for the Cooper Bussmann
Quik-Spec™ Coordination Panelboard. The CCPB with
CUBEFuse simplifies selective coordination and allows for
isolation of individual branch circuit loads for safe work
practices.
Agency Information:
UL 98 Listed, File E302370, Guide WHTY
cULus to CSA Standard 22.2 No. 4, File E302370,
Guide WHTY7
CE Compliant
Shipping Weight: 2.03 lbs per carton
Carton quantity: 6 poles
Environmental Data
Storage and operating temperature: -20ºC to 75ºC**
Product Features and Benefits
• Uses finger-safe Class CF Low-Peak CUBEFuse with
current-limiting, time-delay or fast-acting Class J
performance*
• High Short-Circuit Current Ratings at 200kA
• Disconnect rated to provide means for load isolation
• Full voltage rated at 600Vac
• 125Vdc rated for 80A and below
• UL 98 Listed and suitable for branch circuit disconnect
and branch circuit protection
• 1-, 2- and 3-pole versions are horsepower rated
• Patented rejection feature helps prevent overfusing
• Complies with UL and cULus
• Open fuse indication light per pole
• Additional open fuse indication can be provided by using
the time-delay indicating CUBEFuse version
• Built-in switch/fuse interlock prohibits removing the fuse
while energized
• Permanent lockout/tagout provisions
• Lock-On provision
*See data sheet 9000 for CUBEFuse specifications.
**For fuse performance under or above 25ºC, consult fuse performance
derating charts.
• Box lug loadside terminal torque:
15-60A:
- 18-10AWG 20 Lb-In (1-6mm2/2.2N•m)
- 8-4AWG 35 Lb-In (10-21.1mm2/3.9N•m)
100A:
- 18-10AWG 25 Lb-In (1-6mm2/2.82N•m
- 8-1AWG 40 LB-In (10-45mm2/4.52N•m)
- 6AWG 45Lb-In (16mm2/5.08N•m)
• Spade terminal load connection:
Max. 30A suitable for use with #8-32UNC screw
• Bolt-on style bus connector, #10-32-UNC Hex flange
Phillips screw, torque to 25 Lb-In (2.8N•m)
• Lockout/tagout: 4mm shank lock
• Bolt-mounted design into Quik-Spec Coordination
Panelboard bus
• Local indication: illumination requires closed circuit and
minimum 90Vac operating voltage
• RoHS compliant
0312 BU-SB10881 Form No.CCPB Page 1 of 4 Data Sheet 1161
0312 BU-SB10881 Form No.CCPB Page 2 of 4 Data Sheet 1161
Box lug
loadside terminal
Spade terminal connection
Bolt-on style
bus connector
Local, neon open fuse
indication light
CUBEFuse base
Lockout/tagout provision
Disconnect handle
Symbols for ON and OFF
CCPB Part Poles Voltage Time-Delay Time-Delay Fast-Acting Max. Fuse** SCCR Hp Ratings***
Numbers Rating Non-Indicating Indicating* Non-Indicating Ampacity
CCPB-1-15CF 1 0.5Hp@120V
CCPB-2-15CF 2 TCF1RN, TCF3RN, TCF6RN, TCF6, TCF10, FCF1RN, FCF3RN, FCF6RN, 1.5Hp@240V
600Vac TCF10RN, TCF15RN TCF15 FCF10RN, FCF15RN 15A 200kA 3Hp@240V
CCPB-3-15CF 3 5Hp@480V
7.5Hp@600V
CCPB-1-20CF 1 0.75Hp@120V
CCPB-2-20CF 2 2Hp@240V
600Vac TCF17-1/2RN, TCF20RN TCF17-1/2, TCF20 FCF20RN 20A 200kA 3Hp@240V
CCPB-3-20CF 3 7.5Hp@480V
10Hp@600V
CCPB-1-30CF 1 1.5Hp@120V
CCPB-2-30CF 2 3Hp@240V
600Vac TCF25RN, TCF30RN TCF25, TCF30 FCF25RN, FCF30RN 30A 200kA 5Hp@240V
CCPB-3-30CF 3 15Hp@480V
10Hp@600V
CCPB-1-40CF 1 2.0Hp@120V
CCPB-2-40CF 2 3Hp@240V
600Vac TCF35RN, TCF40RN TCF35, TCF40 FCF35RN, FCF40RN 40A 200kA 7.5Hp@240V
CCPB-3-40CF 3 20Hp@480V
10Hp@600V
CCPB-1-50CF 1 3.0Hp@120V
CCPB-2-50CF 2 5Hp@240V
600Vac TCF45RN, TCF50RN TCF45, TCF50 FCF45RN, FCF50RN 50A 200kA 7.5Hp@240V
CCPB-3-50CF 3 20Hp@480V
10Hp@600V
CCPB-1-60CF 1 3.0Hp@120V
CCPB-2-60CF 2 7.5Hp@240V
600Vac TCF60RN TCF60 FCF60RN 60A 200kA 7.5Hp@240V
CCPB-3-60CF 3 20Hp@480V
10Hp@600V
CCPB-1-70CF 1 3.0Hp@120V
CCPB-2-70CF 2 7.5Hp@240V
600Vac TCF70RN TCF70 FCF70RN 70A 200kA 15Hp@240V
CCPB-3-70CF 3 30Hp@480V
CCPB-1-90CF 1 5.0Hp@120V
CCPB-2-90CF 2 10Hp@240V
600Vac TCF90RN TCF90 FCF80RN, FCF90RN 90A 200kA 20Hp@240V
CCPB-3-90CF 3 40Hp@480V
CCPB-1-100CF 1 5.0Hp@120V
CCPB-2-100CF 2 10Hp@240V
600Vac TCF100RN TCF100 FCF100RN 100A 200kA 20Hp@240V
CCPB-3-100CF 3 50Hp@480V
CUBEFuse
(Class J performance)
Technical Ratings
*1A and 3A indicating CUBEFuse not available. Correct fit with CCPB disconnect requires indicating CUBEFuse with date code R38 or later.
**Any fuse with an amp rating less than or equal to the max fuse rating may be used.Example: TCF15 may be used with CCPB-1-20CF.
***Do not use UPS/Critical Application fast-acting CF with motors.
0312 BU-SB10881 Form No.CCPB Page 3 of 4 Data Sheet 1161
CUBEFuse Motor Sizing Table
Low-Peak CUBEFuse (Amp Rating)
Motor Motor* Optimal Code Heavy
Voltage Size (Hp) FLA (Amps) Protection Max Start
0.167 4.4 10 10 10
0.25 5.8 10 15 15
0.333 7.2 15 15 15
0.5 9.8 15 20 20
115Vac, 0.75 13.8 25 25 30
1-Phase 1 16 25 30 35
1.5 20 30 35 45
224404550
3345060N/A
5** 56 90 100 N/A
0.167 2.2 6 6 6
0.25 2.9 6 6 6
0.333 3.6 6 10 10
0.5 4.9 10 10 10
230Vac, 0.75 6.9 15 15 15
1-Phase 1 8 15 15 17.5
1.5 10 15 20 20
212202525
317253035
528455060
7.5 40 60 N/A N/A
10** 50 80 90 N/A
0.5 2.5 6 6 6
0.75 3.7 6 10 10
1 4.8 10 10 10
200Vac, 1.5 6.9 15 15 15
3-Phase 2 7.8 15 15 17.5
3 11 17.5 20 20
5 17.5 30 35 35
7.5 25.3 40 45 50
20** 62.1 100 N/A N/A
0.5 2.4 6 6 6
0.75 3.5 6 10 10
1 4.6 10 10 10
208Vac, 1.5 6.6 10 15 15
3-Phase 2 7.5 15 15 15
3 10.6 17.5 20 20
5 16.7 25 30 35
7.5 24.2 40 45 50
20** 59.4 90 N/A N/A
Low-Peak CUBEFuse (Amp Rating)
Motor Motor1Optimal Code Heavy
Voltage Size (Hp) FLA (Amps) Protection Max Start
0.5 2.2 6 6 6
0.75 3.2 6 6 6
1 4.2 10 10 10
230Vac, 1.5 6 10 15 15
3-Phase 2 6.8 15 15 15
3 9.6 15 20 20
5 15.2 25 30 30
7.5 22 35 40 45
20** 54 90 100 N/A
0.5 1.1 3 3 3
0.75 1.6 3 3 3
1 2.1 6 6 6
1.5 3 6 6 6
2 3.4 6 6 6
460Vac, 3 4.8 10 10 10
3-Phase 5 7.6 15 15 15
7.5 11 17.5 20 20
10 14 25 25 30
15 21 35 40 45
20 27 40 50 60
50** 65 100 N/A N/A
0.5 0.9 3 3 3
0.75 1.3 3 3 3
1 1.7 3 3 3
1.5 2.4 6 6 6
575Vac, 2 2.7 6 6 6
3-Phase 3 3.9 6 10 10
5 6.1 10 15 15
7.59152020
10 11 17.5 20 20
50** 52 80 100 N/A
NNoottee:: Use Code Max column for low to moderate reverse/jog/plug
applications. Heavy Start permitted only if Code Max does not allow motor
start-up.
*Based on motor FLA from NEC®tables 430.248 and 430.250.
**Max. Hp rating for the CCPB 100 Amp device at specified voltage.
For details on the CCPB and its use in the Quik-Spec™ Coordination Panelboard, see data sheet 1160.
Dimensional Data — in (mm)
39
3.0
(75.8)
1.0
(25.4)
2.0
(50.7)
(5.8)
Ø.2
2.7
(69.1) 2.9
(73.5)
3.9
(99.4)
Ø.5
(12.9)
© 2012 Cooper Bussmann
www.cooperbussmann.com
0312 BU-SB10881 Form No.CCPB Page 4 of 4 Data Sheet 1161
The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of
this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical informa-
tion that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of
any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice,
any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Cooper Bussmann:
CCPB-1-40CF CCPB-2-15CF CCPB-2-20CF CCPB-2-50CF CCPB-3-20CF CCPB-3-50CF CCPB-1-50CF CCPB-
3-60CF CCPB-2-60CF CCPB-3-30CF CCPB-1-15CF CCPB-1-30CF CCPB-2-30CF CCPB-3-40CF CCPB-1-20CF
CCPB-3-15CF CCPB-2-40CF CCPB-1-60CF
