RoHS TC210 Toroidal Chokes Dimensions: Inches (mm) 0.45 MAX (11.43) 0.86 MAX (21.84) 0.50 (12.70) Tin lead to coil C A Vertical Mount Allied Part Number ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( )TC210-100L-RC )TC210-120L-RC )TC210-150L-RC )TC210-180L-RC )TC210-220L-RC )TC210-270L-RC )TC210-330L-RC )TC210-390L-RC )TC210-470L-RC )TC210-560L-RC )TC210-680L-RC )TC210-101L-RC )TC210-121L-RC )TC210-151L-RC )TC210-181L-RC )TC210-221L-RC )TC210-271L-RC )TC210-331L-RC )TC210-391L-RC )TC210-471L-RC )TC210-561L-RC )TC210-681L-RC )TC210-821L-RC )TC210-102L-RC Inductance Tolerance (H) (%) @ 1KHZ 10 12 15 18 22 27 33 39 47 56 68 100 121 150 180 220 270 330 390 470 560 680 820 1000 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 L(H) @ I rated 6.3 7.4 10.2 11.9 14.2 19.1 22.8 26.4 34.7 40.6 48.3 75.2 88.5 84.3 113.1 134.4 181.6 216.3 250.1 293.8 341.5 403.2 472.8 559.2 IDC (A) 10.8 10.3 7.7 7.4 7.0 5.3 5.0 4.8 3.6 3.4 3.3 2.4 2.2 3.4 2.6 2.4 1.8 1.7 1.7 1.6 1.5 1.4 1.4 1.3 DCR () MAX .006 .007 .012 .013 .015 .026 .029 .032 .055 .060 .067 .130 .150 .062 .110 .120 .210 .230 .250 .280 .300 .330 .370 .400 DIM DIM DIM B C A (Nom) (Nom) (Nom) .34 .34 .33 .33 .33 .32 .32 .32 .31 .31 .31 .31 .31 .35 .34 .34 .33 .33 .33 .35 .35 .35 .35 .37 .77 .77 .76 .76 .76 .75 .75 .75 .75 .75 .75 .74 .74 .79 .77 .77 .76 .76 .76 .76 .79 .79 .79 .81 .053 .053 .042 .042 .042 .034 .034 .034 .027 .027 .027 .022 .022 .034 .027 .027 .022 .022 .022 .022 .022 .022 .022 .022 Please specify Vertical or Horizontal Mount by placing a V or H at the beginning of the part number, i.e. VTC210-100L (Vertical Mount). All specifications subject to change without notice. B Horizontal Mount Features * * * * * * Low Magnetic Radiation Low Core Loss High current capacity up to 10A Available in Horizontal or Vertical configuration Optional Tape Cover Cross to Miller / Bourns 2100 Electrical Inductance Range: 10h to 1000h Additional values available Tolerance: 15% over entire range Test Frequency: 1KHz Operating Temp: -55C ~ +105C Temp Rise: T=30C Typical at rated IDC Part temperature should not exceed 125C including temperature rise. Test Equipment (L): 100 LCR meter or equivalent DCR: Chen Hwa 502 Physical Packaging: Bulk Marking: None 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 6/25/10 www.alliedcomponents.com