ZS Series High Impedance Active Probes 1 GHz - 4 GHz Probes Key Features * igh signal fidelity to 4 GHz H bandwidth * ow circuit loading - High input L impedance and low capacitance The ZS Series probes are high impedance, low capacitance active * GHz, 2.5 GHz, 1.5 GHz and 4 1 GHz models factor and a wide variety of accessories ensures the ZS probe meets * * 1 M input resistance .6 pF (4 GHz) and 0.9 pF input 0 capacitance A Variety of Probe Tips for Varied Tasks * High Impedance Reduces Circuit Loading across Full Oscilloscope Bandwidth 8 V input dynamic range, 12 V offset range Engineers must commonly probe range of standard probe tips ensures high frequency signals with high Wide variety of tips and grounds that this probe can meet any difficult signal fidelity. Typical passive probes probing challenge. Various flexible asy to use, integrated with E oscilloscope with high input R and C provide good leads and clips, such as right-angle response at lower frequencies but leads, Y-adapters, and micro-grabbers, inappropriately load the circuit and are also available for probing test distort signals at higher frequencies. points that are spaced farther apart. The ZS Series features both high Innovative Grounding Provides the Highest Signal Fidelity * * probes that maintain high signal fidelity through 4 GHz. A small form every difficult probing challenge. input R (1 M) and low input C (0.6 pF and 0.9 pF) to reduce circuit Loading across the entire probe/oscilloscope bandwidth. The ZS1000 is ideal for 200-600 MHz oscilloscopes. The ZS1500 is ideal for 1 GHz oscilloscopes, the ZS2500 is ideal for 2 GHz oscilloscopes, and the ZS4000 is ideal for 2.5 GHz and 4 GHz oscilloscopes. The small form factor and extensive Keeping the ground loop short is critical to eliminating the effect of high inductance on the signal. The ZS probes provide a wide variety of unique and innovative accessories which maintain the highest signal fidelity. They eliminate the effects of the loop on the circuit. EXTENSIVE SET OF PROBE TIPS AND GROUND LEADS Use the Solder-In Ground with Straight Tip for general purpose browsing. The Straight Tip and Offset Ground Lead can be used together for probing signal and ground points extremely close together. Hard-to-reach spaces can be be probed with the Bent Sharp Tip and can be used with a range of ground leads like the flexible Short Right-Angle Lead shown here. Probe directly on surface mount components, like resistors or capacitors, with the Discrete SMD Tip. Use this tip with any of the ground leads, like the flexible Long Right-Angle Lead shown here. The 2.54 mm probe adapter provides full BW probing and holds the probe in place. The Ground Blade and Copper Pad provide the shortest ground loop for excellent signal fidelity when probing an IC. Use them with the insulated IC Lead Tip to prevent shorting between test points. 2 ZS PROBE ACCESSORIES PK-ZS-010 Channel ID Colored Clips ZS4000 PK-ZS-019 Freehand Probe Holder PK-ZS-006 Right Angle Socket PACC-PT005 Bent Tip PACC-PT003 IC Tip PK-ZS-001 Probe Tip - Standard PK-ZS-017 Pogo Tip PK-ZS-014 Y-Lead Adapter PK-ZS-023 Straight Pin Lead - 13cm PK-ZS-022 Straight Pin Lead - 7cm PACC-LD003 Right Angle Pin Lead - 5cm PACC-LD004 Right Angle Pin Lead - 10cm PK-ZS-018 2.54 mm Square Pin Adapter PK-ZS-021 Ground Blade Narrow PK-ZS-020 Pogo Ground Lead PK-ZS-016 Offset Ground (Z Lead) PK-ZS-009 Copper Tape PK-ZS-015 Ground Blade - Wide PK-ZS-024 2.54 mm PCB Adapter PK-ZS-007R Microclip Sprung Hook, Red PK-ZF-025 QFPIC Clip Yellow Short PK-ZF-025 QFPIC Clip Green Short PK-ZS-007B Microclip Sprung Hook, Black ZS1000 ZS1500 ZS2500 PK-ZS-010 Channel ID Colored Clips PACC-MS005 Freehand Probe Holderk PK-ZS-012 2.54 mm Square Pin Adapter PK-ZS-006 Right Angle Socket PACC-PT005 Bent Tip PACC-PT003 IC Tip PK-ZS-001 Probe Tip - Standard Qty: 3 PK-ZS-013 Pogo Tip PK-ZS-005 Y-Lead Adapter PK-ZS-004 Single Lead Long PK-ZS-003 Single Lead Short PACC-LD003 Right Angle Pin Lead - 5cm PACC-LD004 Right Angle Lead - Long PK-ZS-002 Offset Ground PK-ZS-008 Ground Blade - Narrow PACC-CD008 Pogo Ground Lead PK-ZS-011 Ground Blade - Wide PK-ZS-007R Microclip Sprung Hook, Red PK-ZS-009 Copper Tape PK-ZS-007B Microclip Sprung Hook, Black 3 SPECIFICATIONS AND ORDERING INFORMATION Specifications Electrical Characteristics Probe Bandwidth Input Capacitance DC Input Resistance Probe Offset Range Attenuation Input Dynamic Range Non-destruct Voltage ZS1000 ZS1500 ZS2500 ZS4000 1 GHz 1.5 GHz 0.9 pF 2.5 GHz 4 GHz 0.6 pF N/A 1 M /10 8 V 20 V General Characteristics Cable Length 12 V 1.3 m Ordering Information Product Description Product Code 4 GHz, 0.6 pF, 1 M High Impedance Active Probe 2.5 GHz, 0.9 pF, 1 M High Impedance Active Probe 1.5 GHz, 0.9 pF, 1 M High Impedance Active Probe 1 GHz, 0.9 pF, 1 M High Impedance Active Probe Set of 4 ZS2500, 2.5 GHz, 0.9 pF, 1 M High Impedance Active Probes Set of 4 ZS1500, 1.5 GHz, 0.9 pF, 1 M High Impedance Active Probes Set of 4 ZS1000, 1 GHz, 0.9 pF, 1 M High Impedance Active Probes Standard Accessory/Quantity ZS4000 ZS2500 ZS1500 ZS1000 ZS2500-QUADPAK ZS1500-QUADPAK ZS1000-QUADPAK Customer Service Teledyne LeCroy oscilloscopes and probes are designed, built, and tested to ensure high reliability. In the unlikely event you experience difficulties, our digital oscilloscopes are fully warranted for three years and our probes are warranted for one year. This warranty includes: * No charge for return shipping * Long-term 7-year support * Upgrade to latest software at no charge 1-800-5-LeCroy teledynelecroy.com Accessory Description 2.54 mm PCB Adaptor 2.54mm Square Pin Adapter 2.54mm Square Pin Adaptor IC Tip Bent Tip Channel ID Clips (Set of 4 colors) Copper Tape Pad Freehand Probe Holder Freehand Probe Holder Ground Blade - Narrow Ground Blade - Wide Ground Blade, Narrow Ground Blade, Wide Micro-Grabber Pair Offset Ground Offset Ground - Z Lead Pogo Ground Lead Pogo Ground Lead Pogo Tip Pogo Tip Probe Tip - Standard QFPIC Clips (set of 2) Right Angle Lead - Long Right Angle Lead - Short Right Angle Socket Straight Pin Lead - Long Straight Pin Lead - Long Straight Pin Lead - Short Straight Pin Lead - Short Y Lead Adapter Y Lead Adaptor Replacement Part Number PK-ZS-024 PK-ZS-012 PK-ZS-018 PACC-PT003 PACC-PT005 PK-ZS-010 PK-ZS-009 PK-ZS-019 PACC-MS005 PK-ZS-008 PK-ZS-011 PK-ZS-021 PK-ZS-015 PK-ZS-007R and PK-ZS-007B PK-ZS-016 PK-ZS-002 PK-ZS-020 PACC-CD008 PK-ZS-017 PK-ZS-013 PK-ZS-001 PK-ZS-025 PACC-LD004 PACC-LD003 PK-ZS-006 PK-ZS-023 PK-ZS-004 PK-ZS-022 PK-ZS-003 PK-ZS-005 PK-ZS-014 ZS1000 ZS1500 ZS2500 ZS4000 5 1 1 1 1 1 2 1 1 1 4 2 1 1 1 1 2 2 1 2 1 1 1 3 1 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 Local sales offices are located throughout the world. Visit our website to find the most convenient location. (c) 2010 by Teledyne LeCroy, Inc. All rights reserved. Specifications, prices, availability, and delivery subject to change. without notice. Product or brand names are trademarks or requested trademarks of their respective holders. zsprobes-ds-13nov13