TX-7070-EFE-206A-50M0000000 - MICROCHIP TECHNOLOGY

TX-707

Low g-Sensitivity

Temperature Compensated Crystal Oscillator

The TX-707 Series TCXO combines innovative manufacturing and the latest technology to provide low phase noise and excellent

g-sensitivity. The fully hermetic assembly includes a dual crystal circuit to cancel opposing g-sensitivity vectors enclosed in a

5x7mm ceramic package.

Vectron International • 267 Lowell Road, Unit 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com

• Operating Temperature Range to +105°C

• Low Phase Noise, Low g-sensitivity 0.1ppb/g

• Fully RoHS Compliant

• Surface Mount, Low Prole

• High Shock Survival up to 20k g

• Frequency Range: 8.184 MHz to 50 MHz

• Fully Hermetic Seal

• Military Portable Radios

•GPS Telemetry

• Test and Measurement Equipment

• Missile systems

• GNSS

• SATCOM

Features Applications

Description

TX-707

Parameter Min Typ Max Units Condition

Frequency Stabilities1

vs. operating temperature range

(referenced to +25°C) -1.0 +1.0 ppm -40… +85°C

Initial Tolerance

vs. supply voltage change

vs. load change

vs. aging / 1 year

vs. aging

-1.0

-0.2

±1

+1.0

+0.2

4.0

ppm

at time of shipment, nominal EFC

Vs ± 5%

Load ± 10%

@ +40°C

for 15 years

Supply Voltage (Vs)

Supply voltage 4.75 5.0 5.25 VDC

Supply voltage 3.135 3.3 3.465 VDC

Current consumption 5 10 mA Increases with output frequency

Performance Specications

Vectron International • 267 Lowell Road, Unit 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com

Parameter Min Typ Max Units Condition

RF Output

Signal HCMOS

Load 15 pF

Signal Level (Vol) 0.1*Vs V

Signal Level (Voh) 0.9*Vs V

Rise/Fall Time 5 ns @ nominal Load and 10% to 90% of waveform

Duty cycle 40 50 60 % @ nominal Load and @ 50% level

Signal Clipped Sinewave Frequencies greater than 15 MHz only.

Level 1Vpp with nominal Load

Load R 10 kohm

Load C 10 pF

Electronic Frequency Control (EFC)

Tuning Range (options A, C) Fixed; No adjust

Tuning Range (options B, D) ±5.0 ±12 ppm

Tuning Slope Positive

Control Voltage Range 0.0 Vs VDC

Freq. control input impedance 10 kohm

RF Output Enable / Disable (Pin 4)

RF Output Enabled Logic “1” or no connect

RF Output Disabled Logic “0”

Additional Parameters1

Phase Noise3 (@ 10 MHz - no vibration) -100

-128

-149

-158

-160

dBc/Hz

10 Hz

100 Hz

1 kHz

10 kHz

100 kHz

Phase Noise3 (@ 50 MHz - no vibration) -82

-113

-135

-151

-155

dBc/Hz

10 Hz

100 Hz

1 kHz

10 kHz

100 kHz

g-sensitivity 0.2 ppb/g per axis (ordering code A and B)

0.1 ppb/g per axis (ordering code C and D)

parts 100% tested with 100 Hz sine vibration

Shock MIL-STD-883G; Method 2002.4; Condition F

Vibration Sine MIL-STD-202G, METHOD 204D, Test Condition D

Thermal Cycling MIL-STD-202, METHOD 107, Test Condition A

Absolute Maximum Ratings

Supply voltage (Vs) 6.0 V Damage will occur beyond this level

Control Voltage 0Vs V

Operable temperature range -45 +105 °C

Storage temperature range -55 +105 °C

Vectron International • 267 Lowell Road, Unit 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com

10 MHz (Static)

TX-7070-EAE-206C-10M0000000

Static Phase Noise Performance

G-Sensitivity Performance

Vectron International • 267 Lowell Road, Unit 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com

Static Phase Noise Performance

50 MHz (Static)

TX-707-50M0000000

G-Sensitivity Performance

Vectron International • 267 Lowell Road, Unit 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com

Standard Shipping Method

Dimensions in inches

Outline Drawing / Enclosure

1Electronic Frequency Control (EFC) Option

or No Connect*

2 No connect*

3 Ground

4 RF Output Enable / Disable Function+

* Do not connect to this pin - Vectron reserved

+ if customer does not intend to use the enable functional tie this pin to Vcc or allow it to oat.

Plating Composition of TX-707 pads:

30-90 microinches electroless Gold over 50-350

microinches electroless Nickel

Contact factory for tin dipped parts. Tinning increases

overal height of units to 0.130 Max

5 RF Output

6 No Connect*

7Supply Voltage

8 No Connect*

Vectron International • 267 Lowell Road, Unit 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com

Recommended Reow Proles for Pb-Free & Sn-Pb

Critical Zone

to T

Ramp up

Ramp dow n

t 25°C to peak

Temperature

Time

min

preheat

Prole Feature Pb-Free Assembly Prole Feature Pb-Free Assembly

Average ramp-up rate (TL to TP) 3°C/secod max. Time 25°C to Peak Temperature 8 minutes max.

Preheat - Temperature min Tsmin 150°C Time maintained above

- Temperature min Tsmax 200°C - Temperature (TL) 217°C

- Time (min to max) (ts) 60-180 seconds - Time (tL) 60-150 seconds

Tsmax to TL -Ramp-up Rate 3°C/secod max.

Time maintained above - Temperature (TL) 217°C Time within 5°C of actual 20-40 seonds max.

- Time (TL) 60-150 seconds Peak Temperature (tp)

Peak Temperature (Tp) max 260°C Ramp-down Rate 6°C/second max.

Note: All temperatures refer to topside of the package, measured on the package body surface.

Prole Feature Sn-Pb Assembly Prole Feature Sn-Pb Assembly

Average ramp-up rate (TL to TP) 3°C/secod max. Time 25°C to Peak Temperature 4 minutes max.

Preheat - Temperature min Tsmin 135°C Time maintained above

- Temperature Min Tsmax 155°C - Temperature (TL) 183°C

- Time (min to max) (ts) 60-90 seconds - Time (tL) 45-60 seconds

Tsmax to TL -Ramp-up Rate 3°C/secod max.

Time maintained above - Temperature (TL) 183°C Time within 5°C of actual 10-20 seonds max.

- Time (TL) 40-60 seconds Peak Temperature (tp)

Peak Temperature (Tp) max 230°C Ramp-down Rate 6°C/second max.

Note: All temperatures refer to topside of the package, measured on the package body surface.

230°C Reow Prole

260°C Reow Prole

Ordering Information

TX - 7070 - E A E - 106 A - 10M0000000

Product Family

TX: TCXO

Package

5x7 mm

Height

0: 2.8 mm

Supply Voltage

D: 5.0 Vdc

E: 3.3 Vdc

Stability Code

106: ±1ppm

206: ±2ppm

506: ±5ppm

Frequency

Tuning and g sensitivity option

A: No Tuning 0.2 ppb/g

B: Electrical Tuning 0.2ppb/g

C: No Tuning 0.1 ppb/g

D: Electrical Tuning 0.1ppb/g

Vectron International • 267 Lowell Road, Unit 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com

Disclaimer

Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No

rights under any patent accompany the sale of any such product(s) or information. 9-29-2017 JV

For Additional Information, Please Contact

RF Output Code

A: HCMOS

F: Sinewave, clipped (for Frequencies >15 MHz)

Temperature Range

E: -40°C to +85°C

F: -40°C to +105°C (See note 7)

J: -20°C to +70°C

T: 0°C to +70°C

Notes:

1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all

frequencies.

2. Unless otherwise stated, all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency

control voltage, load, and temperature (25°C).

3. Phase noise degrades with increasing output frequency.

4. Subject to technical modication.

5. Contact factory for availability.

6. Frequencies not listed above will require NRE charges and additional lead times.

7. Only available with 506 stability Code.

USA:

Vectron International

267 Lowell Road, Unit 102

Hudson, NH 03051

Tel: 1.888.328.7661

Fax: 1.888.329.8328

Europe:

Vectron International

Landstrasse, D-74924

Neckarbischofsheim, Germany

Tel: +49 (0) 3328.4784.17

Fax: +49 (0) 3328.4784.30

Asia:

Vectron International

68 Yin Cheng Road(C), 22nd Floor

One LuJiaZui

Pudong, Shanghai 200120, China

Tel: +86 21 6194 6886

Fax: +86 21 6194 6699

Available Standard Frequencies (MHz)6

8.184 9.600 10.000 12.500

16.368 19.200 20.000 25.000

32.736 38.400 40.000 50.000

Vectron Standard TX-707 Part Numbers

TX-7070-EAE-106A-10M0000000 TX-7070-EAE-106C-20M0000000 TX-7070-EAE-106C-40M0000000

TX-7070-EAE-106C-10M0000000 TX-7070-DAE-106D-25M0000000 TX-7070-EAE-106D-40M0000000

TX-7070-EAE-106D-10M0000000 TX-7070-EAE-106A-25M0000000 TX-7070-EFE-106C-40M0000000

TX-7070-EAE-206C-10M0000000 TX-7070-EAE-106A-50M0000000

TX-7070-EFE-106C-16M3680000 TX-7070-EAE-106C-50M0000000

TX-7070-EFE-106D-16M3680000 TX-7070-EAE-106D-50M0000000

TX-7070-EFE-106D-50M0000000

TX-7070-EFE-206A-50M0000000