15-21USOW/S530-A2/TR8 PACKAGE IN 8mm TAPE ON 7" DIAMETER REEL. COMPATIBLE WITH AUTOMATIC PLACEMENT EQUIPMENT. COMPATIBLE WITH INFRARED AND VAPOR PHASE REFLOW SOLDER PROCESS. MONO-COLOR TYPE. The 15-21 SMD Taping is much smaller than leaded components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, light Weight makes them ideal for miniature application, etc. Automotive: backlighting in dashboard and switch. Telecommuncation: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. "43+5+355+54+ General use. !+3 PART NO !" CHIP Material Emitted Color AlGaInP Super Sunset Orange Lens Color White Diffused ## *$+,-* *'+.+/*"'+ -*")*"0+* " $ --,*-,11 %!& --,-22*-,-1*-,- '(() 0003'(4 15-21USOW/S530-A2/TR8 15-21USOW/S530-A2/TR8 !"# ( 7 43 (+ +( 543( 5 %40/+( 8# 25 ! Operating Temperature "4) -40 ~ +85 Storage Temperature "5( -40 ~ +90 Soldering Temperature "543 260 (for 5 second) 4055)(4+ / 60 9%40/ +(:(7; <=>? 8#:9? 160 ! $ % &' ( ( 7 43 @+ "7) @A +( 4+/(4+ Luminous intensity 8 10 35 ----- / 8#6! Viewing Angle ----- 150 ----- / 8#6! Peak Wavelength ) ----- 621 ----- + 8#6! / ----- 615 ----- + 8#6! Spectrum Radiation Bandwidth ----- 18 ----- + 8#6! Forward Voltage # ----- 2.0 2.4 8#6! 5 +( 8 ----- ----- 10 ! Vr=5V 15-21USOW/S530-A2/TR8 !)& 8( "5(4+/(4+5 1 43/=( " @- Test )3 Hours/Cycle B ,-5 .$ ,-5 .$ ,-5 ! =C + 2 ")(73 + $ + =C + 3 "'3 '49 5 $ + 4 ='")( (4 " @ = ,-5 5 ='")( (4 " @ = ,-5 6 )(+$# 8#6! = ,-5 D= = ,-5 7 ='")( ='=/(7 2 15-21USOW/S530-A2/TR8 ! $ *% &' &+ 15-21USOW/S530-A2/TR8 - !& $ , 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage time 2.1 The operation of temperature and R.H. are : 5~35, R.H.60%. 2.2 Once the package is opened , the products should be used within a week. Otherwise , they should be keep in a dampproof box with desiccants. Considering the tape life , we suggest our customers to use our products within a year(from production date). 2.3 If opened more than one week in an atmosphere 5~35, R.H.60%* they should be treated at 605for 15hrs. 2.4 When you discover that the desiccant in the package has a pink color (normal=blue) , you should treat them in the same conditions as 2.3. 15-21USOW/S530-A2/TR8 , - '.)/ Please refer to the following figure : - ) Basic spec is 5 sec when 260.If temperature is higher, time should be shorter (+10 -1sec). Power dissipation of iron should be smaller than 15 W , and temperature should be controllable.Surface temperature of the device should be under 230 . 0 1. Customer must finish rework within 5 sec under 260. 2. Copper foil can not be touched by the head of iron. 3. Twin-head type is preferred. 15-21USOW/S530-A2/TR8 1 0! ! (45 )'( 443+