15-21USOW/S530-A2/TR8
PACKAGE IN 8mm TAPE ON 7“ DIAMETER
REEL.
COMPATIBLE WITH AUTOMATIC PLACE-
MENT EQUIPMENT.
COMPATIBLE WITH INFRARED AND VAP-
OR PHASE REFLOW SOLDER PROCESS.
MONO-COLOR TYPE.
The 15-21 SMD Taping is much smaller than le-
aded components, thus enable smaller board size,
higher packing density, reduced storage space and
finally smaller equipment to be obtained.
Besides, light Weight makes them ideal for minia-
ture application, etc.
Automotive: backlighting in dashboard and switch.
Telecommuncation: indicator and backlighting in telephone and fax.
Flat backlight for LCD, switch and symbol.
General use.
CHIP
Material Emitted Color
!" AlGaInP Super Sunset
Orange White Diffused
##
"$
%!&
'(()
*$+,-* *'+.+/*"'+ -*")*"0+*
--,*-,11 -
--,-22*-,-1*-,- -
0003'(4
"43+5+355+54+
!+3
Lens ColorPART NO
15-21USOW/S530-A2/TR8
15-21USOW/S530-A2/TR8
!"#
(
7
43 (+
+(
543( 5
%40/+( 8# 25 !
Operating Temperature "4) -40 ~ +85
Storage Temperature "5( -40 ~ +90
Soldering Temperature "543 260 (for 5 second)
4055)(4+ / 60
9%40/
+(:(7;
<=>?
8#:9? 160 !
$%&'(
( 743 @+ "7) @A +( 4+/(4+
Luminous intensity 8 10 35 ----- / 8#6!
Viewing Angle ----- 150 ----- / 8#6!
Peak Wavelength )----- 621 ----- + 8#6!
/----- 615 ----- + 8#6!
Spectrum Radiation
Bandwidth ----- 18 ----- + 8#6!
Forward Voltage # ----- 2.0 2.4 8#6!
5
+( 8 ----- ----- 10 !Vr=5V
15-21USOW/S530-A2/TR8
2
!)&
8( "5(4+/(4+5 Test
Hours/Cycle
)3
B !
143/=( "@- ,-5
2")(73
=C +
+
$ +
.$ ,-5
3"'3'49
=C+
5
$+
.$ ,-5
4='")((4 "@= ,-5
5='")((4 "@= ,-5
6)(+$# 8#6! = ,-5
7='")(
='=/(7
D= = ,-5
15-21USOW/S530-A2/TR8
!$*%&'&+
15-21USOW/S530-A2/TR8
-
!&
,
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause
big current change ( Burn out will happen ).
2. Storage time
2.1 The operation of temperature and R.H. are : 5~35, R.H. 60%.
2.2 Once the package is opened , the products should be used within a week.
Otherwise , they should be keep in a dampproof box with desiccants.
Considering the tape life , we suggest our customers to use our products
within a year(from production date).
2.3 If opened more than one week in an atmosphere 5~35, R.H.60%*
they should be treated at 605for 15hrs.
2.4 When you discover that the desiccant in the package has a pink color
(normal=blue) , you should treat them in the same conditions as 2.3.
$
15-21USOW/S530-A2/TR8
,
-'.)/
Please refer to the following figure :
-)
Basic spec is 5 sec when 260.If temperature is higher, time should be shorter (+10
-1sec). Power dissipation of iron should be smaller than 15 W , and temperature should
be controllable.Surface temperature of the device should be under 230 .
0
1. Customer must finish rework within 5 sec under 260.
2. Copper foil can not be touched by the head of iron.
3. Twin-head type is preferred.
15-21USOW/S530-A2/TR8
10!!
)'(
443+
(45
