Smart Slaves
Remote I/O Terminals with Transistors
DRT2-ID08(-1)/OD08(-1)/MD16(-1)
MIL Connector Terminals with Transistors
DRT2-ID16ML(-1)/OD16ML(-1)/ID16MLX(-1)/OD16MLX(-1)
Environment-resistive Terminals with Transistors (without detection functions)
DRT2-ID04CL(-1)/OD04CL(-1)/ID08CL(-1)/OD08CL(-1)/
MD16CL(-1)/HD16CL(-1)
OMRON Corporation
Industrial Automation Company
Control Devices Division H.Q.
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel:(81)75-344-7109
Fax:(81)75-344-7149
Regional Headquarters
OMRON EUROPE B.V.
Wegalaan 67-69, NL-2132 JD Hoofddorp
The Netherlands
Tel:(31)2356-81-300/
Fax:(31)2356-81-388
Authorized Distributor:
Note: Specifications subject to change without notice. Cat. No. R110-E1-05
Printed in Japan
1006-0.3M
OMRON ELECTRONICS LLC
1 East Commerce Drive, Schaumburg,
IL 60173 U.S.A.
Tel:(1)847-843-7900/Fax:(1)847-843-8568
OMRON ASIA PACIFIC PTE. LTD.
83 Clemenceau Avenue,
#11-01, UE Square,
Singapore 239920
Tel:(65)6835-3011/Fax:(65)6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120 China
Tel:(86)21-5037-2222/Fax:(86)21-5037-2200
Note: Do not use this document to operate the Unit.
Printed on 100%
Recycled Paper
Remote Maintenance
The lineup now includes a wide variety of Smart Slaves with different numbers of control
points that contribute to production site servicing and repair.
Operating time monitor error or contact
operation count monitor error
2 3
OMRON's DRT2-series Smart Slaves do not just input and output ON/OFF signals. They collect a variety
of value-added information to help increase the rate of operation without changing the wiring for
existing DeviceNet networks. In particular, they allow the separation of control systems and
maintenance systems so that maintenance systems can be created independently of control systems.
PLC
Configurator
Control I/O
DRT2-series
Smart Slave
Pneumatic valve
(Connected device
comment)
Maintenance information
Easy-to-view
Display
2
3
Sensor
(Connected device
comment)
Cylinder
(Connected device comment)
Control System Maintenance System
Maintenance SystemControl System
Operating time, contact operation
counter
Machine Operation
Monitored by Slave
Faster Maintenance
Work
1
Use production site information in a variety of applications,
such as maintenance and quality control.
The Slave can hold comments, allowing
quick identification of fault locations and
faulty devices.
The Slave Unit represents
machine operating time and
operational changes as data,
enabling monitoring without
increasing the load between
controllers.
By counting the number of
ON/OFF operations and the
total operating time, the Slave
Unit can provide notification
when maintenance is required.
Measuring Counting
Maintenance is
required for
cylinder 23A in
inspection line A!
All data can be converted to electronic format and,
by combining with an OMRON PLC (CS/CJ Series),
checked directly from Ethernet or the Internet to
allow remote maintenance.
Information monitoring for
each Slave
Collect a variety of data from maintenance systems without
influencing control systems and productivity.
Using OMRON Temperature Input Terminals for
Maintenance
Slave comment
Status confirmation using the status icon
Unit conduction time monitor error
Communications power voltage monitor error
If it takes too long
to modify the
ladder program on
the Master when a
Temperature
Sensor is replaced:
Slaves internally
convert display values
to temperature input
values so the Controller
program no longer has
to be modified to
perform this task.
Short Startup
If prolonging the
time it takes to
reach a certain
temperature may
degrade
equipment:
The operating time of a preset temperature range is counted in 1-s units.
The peaks or valleys of temperature inputs that change in a regular pattern
are counted to predict when devices operating with severe temperature
swings are due for maintenance.
Failure Prediction
and Maintenance
Sensor replaced by one
with a different input range
Operating time
Indicator service
life control
Time
Input
Semiconductor
manufacturing equipment
Temperature
Scaling performed
inside the Slave
Slaves can notify the
Master when a setting
is exceeded.
Scaling points for 0%
and 100% are set from
the Configurator
Maintenance System
Maintenance System
Control System
Control System
DRT2-series
Smart Slave
DeviceNet
Configurator
Ethernet
Maintenance information
PLC
Control
information
Unit conduction
time monitor
(See note.)
Operating time
monitor
External load
short-circuit detection
Contact operation
counter (See note.)
I/O power status
monitor
Communication error
history monitor
Network power
voltage monitor
Note: The contact operation counter function and the unit conduction time monitor function cannot be used simultaneously.
Operating time monitor
Contact operation counter
Unit conduction time monitor
Slave and connected component comments
I/O power status monitor
Reliable equipment
startup
Preventive maintenance
of equipment
Reduced startup time
Reduced downtime
It's time for
motor
maintenance!
What is the
present
communications
voltage?
The cylinder's
speed is
incorrect!
It might be time
for a switch
inspection!
Is the I/O
power supply
turned ON?
What was the
cause
of the error?
Communication error history
monitor
Network power voltage monitor
The wiring to
the I/O device is
short-circuited
or broken!
Operating time monitor error or contact
operation count monitor error
2 3
OMRON's DRT2-series Smart Slaves do not just input and output ON/OFF signals. They collect a variety
of value-added information to help increase the rate of operation without changing the wiring for
existing DeviceNet networks. In particular, they allow the separation of control systems and
maintenance systems so that maintenance systems can be created independently of control systems.
PLC
Configurator
Control I/O
DRT2-series
Smart Slave
Pneumatic valve
(Connected device
comment)
Maintenance information
Easy-to-view
Display
2
3
Sensor
(Connected device
comment)
Cylinder
(Connected device comment)
Control System Maintenance System
Maintenance SystemControl System
Operating time, contact operation
counter
Machine Operation
Monitored by Slave
Faster Maintenance
Work
1
Use production site information in a variety of applications,
such as maintenance and quality control.
The Slave can hold comments, allowing
quick identification of fault locations and
faulty devices.
The Slave Unit represents
machine operating time and
operational changes as data,
enabling monitoring without
increasing the load between
controllers.
By counting the number of
ON/OFF operations and the
total operating time, the Slave
Unit can provide notification
when maintenance is required.
Measuring Counting
Maintenance is
required for
cylinder 23A in
inspection line A!
All data can be converted to electronic format and,
by combining with an OMRON PLC (CS/CJ Series),
checked directly from Ethernet or the Internet to
allow remote maintenance.
Information monitoring for
each Slave
Collect a variety of data from maintenance systems without
influencing control systems and productivity.
Using OMRON Temperature Input Terminals for
Maintenance
Slave comment
Status confirmation using the status icon
Unit conduction time monitor error
Communications power voltage monitor error
If it takes too long
to modify the
ladder program on
the Master when a
Temperature
Sensor is replaced:
Slaves internally
convert display values
to temperature input
values so the Controller
program no longer has
to be modified to
perform this task.
Short Startup
If prolonging the
time it takes to
reach a certain
temperature may
degrade
equipment:
The operating time of a preset temperature range is counted in 1-s units.
The peaks or valleys of temperature inputs that change in a regular pattern
are counted to predict when devices operating with severe temperature
swings are due for maintenance.
Failure Prediction
and Maintenance
Sensor replaced by one
with a different input range
Operating time
Indicator service
life control
Time
Input
Semiconductor
manufacturing equipment
Temperature
Scaling performed
inside the Slave
Slaves can notify the
Master when a setting
is exceeded.
Scaling points for 0%
and 100% are set from
the Configurator
Maintenance System
Maintenance System
Control System
Control System
DRT2-series
Smart Slave
DeviceNet
Configurator
Ethernet
Maintenance information
PLC
Control
information
Unit conduction
time monitor
(See note.)
Operating time
monitor
External load
short-circuit detection
Contact operation
counter (See note.)
I/O power status
monitor
Communication error
history monitor
Network power
voltage monitor
Note: The contact operation counter function and the unit conduction time monitor function cannot be used simultaneously.
Operating time monitor
Contact operation counter
Unit conduction time monitor
Slave and connected component comments
I/O power status monitor
Reliable equipment
startup
Preventive maintenance
of equipment
Reduced startup time
Reduced downtime
It's time for
motor
maintenance!
What is the
present
communications
voltage?
The cylinder's
speed is
incorrect!
It might be time
for a switch
inspection!
Is the I/O
power supply
turned ON?
What was the
cause
of the error?
Communication error history
monitor
Network power voltage monitor
The wiring to
the I/O device is
short-circuited
or broken!
Wide variety of control and maintenance functions using DeviceNet.
4 5 6
DeviceNet Configurator
DRT2-ID16(-1)
DRT2-OD16(-1)
DRT2-ID08(-1)
DRT2-OD08(-1)
DRT2-MD16(-1)
Settings and monitoring
for startup
Settings and monitoring
for maintenance
DRT2-ROS16
DRT2-ID16S(-1)
DRT2-MD16S(-1)
DRT2-AD04/DRT2-AD04H
DRT2-DA02
DRT2-TS04T
DRT2-TS04P
DRT2-ID08C(-1)
DRT2-OD08C(-1)
DRT2-HD16C(-1)
I/O Control and Maintenance
Sensor Input and Maintenance
Monitor Control and Maintenance
Analog Control and Maintenance
E5ZN-DRT
3G3MV-PDRT2 (for 3G3MV Series)
3G3RV-PDRT2 (for 3G3RV Series)
DRT2-ID32ML(-1)
DRT2-OD32ML(-1)
DRT2-MD32ML(-1)
DRT2-ID16ML(-1)
DRT2-OD16ML(-1)
DRT2-ID16MLX(-1)
DRT2-OD16MLX(-1)
DRT2-ID16TA(-1)
DRT2-OD16TA(-1)
DRT2-MD16TA(-1)
DRT2-ID04CL(-1)
DRT2-OD04CL(-1)
DRT2-ID08CL(-1)
DRT2-OD08CL(-1)
DRT2-MD16CL(-1)
DRT2-HD16CL(-1)
DRT2-WD16CL(-1)
Monitor network devices using
a DeviceNet Configurator.
PLC
CS/CJ-series
DeviceNet Unit
DRT2-ID32SL(H)(-1)
DRT2-OD32SL(H)(-1)
DRT2-MD32SL(H)(-1)
DRT2-ID32B(-1)
DRT2-OD32B(-1)
DRT2-MD32B(-1)
DRT2-ID32BV(-1)
DRT2-OD32BV(-1)
DRT2-MD32BV(-1)
Board Terminals
with MIL Connectors
Remote I/O Terminals with
Screw-less Clamps
e-CON Connector Terminals Analog I/O Terminals Temperature Input
Terminals DeviceNet Communications
Unit for E5ZN Digital
Temperature Controllers
DeviceNet Communications
Units/Cards for Inverters
Remote I/O Terminals
with Transistors
Remote I/O Terminal
with Relay Outputs
Environment-resistive
Terminals with Transistors
(with detection functions)
Remote I/O Terminals
with 3-tier Terminal Blocks
MIL Connector
Terminals
Environment-resistive
Terminals with Transistors
(without detection functions)
Collect a variety of data from
maintenance systems without
influencing control systems and
productivity.
Communications power supply
voltage monitor, deterioration due
to aging, operating time data, and
other information can be easily
collected and managed via the
network.
Locations of problems can be easily
identified.
Single action
Models with 8 Input,
8 Output, or 16 I/O Points
Added to the Lineup
Remote I/O Terminals with
IP67 High Environmental
Resistance
Terminals with
16 Inputs or Outputs
Remote I/O Terminals
with Transistors
DRT2-ID08(-1)/OD08(-1)/
MD16(-1)
Environment-resistive Terminals
with Transistors
DRT2-ID04CL(-1)/OD04CL(-1)/
ID08CL(-1)/OD08CL(-1)/MD16CL(-1)/
HD16CL(-1)/WD16CL(-1)
MIL Connector Terminals
with Transistors
DRT2-ID16ML(-1)/
OD16ML(-1)/
ID16MLX(-1)/
OD16MLX(-1)
First Board-type Smart Slave Terminals
User boards attach easily to
the DRT2- D32V(-1) using screws.
Wiring is completed in a single
action.
No screw tightening required.
Removable terminal blocks.
Advanced models detect ground
faults and broken lines in I/O wiring.
Applicable wire sizes range
from AWG24 to AWG16 (0.2
to 1.25 mm2 dia.)
Includes industry-standard
e-CON connector that can be
used to connect prewired
sensors without using special
tools.
(The OMRON XN2 Connector can
be used.)
The DRT2-AD04H offers high
resolution at 1/30,000 (full scale) and
insulation between input channels.
The DRT2-AD04 and DRT2-DA02
support a wide variety of data
sampling function, including scaling,
peak/bottom hold, top/valley hold,
comparator, integral, and differential
operation functions.
Offers basically the same functions as
Analog Input Terminals, such as
scaling and comparators.
Also provides functions that are
available only from Temperature
Input Terminals, such as the time in a
preset temperature range and
temperature difference detection
between input channels.
Monitoring and setting of
Temperature Controller from
PLC.
Batch download of all
Temperature Controller
parameters from Configurator.
Frequencies and other
specifications can be designated
from PLC.
Monitor-related maintenance
possible, including output current
(torque) error detection/trace,
operation monitor, and general-
purpose I/O read.
I/O points can be
extended by adding
Expansion Units.
One-step relay exchange
Operation time monitor
function enabled by
combining Remote I/O
Terminals with
Expansion I/O Units.
High resistance to
environments (IP67).
Detecting shorts in the
sensor power supply is
also possible.
The 3-tier Terminal Block
means that wiring
locations are easy to find
with no wiring to
intermediate terminals. Ultra-small 32-point remote
terminals (35 x 60 x 80 mm
(W x D x H)).
Smart Slave functions provide robust
support for effective maintenance and
monitoring device operation status.
The terminals conform to IP67 and use
materials selected for resistance to oil
and spattering.
Models with two-output connector are
also available to improve ease of
connection with hydraulic valve
devices.
Connection with an array of
I/O interfaces is achieved by
combining adaptor boards
for D-Sub or other
interfaces.
7 DRT2-series Smart Slave DRT2-series Smart Slave 8
Functions Supported by Smart Slaves
❍: Yes, ---: No
Note: The contact operation count monitor and the total RUN (ON) time monitor cannot be used at the same time for one contact.
External load detection is supported only by the DRT2-MD32SLH-1 and DRT2-OD32SLH-1.
Function
Slave name
General-purpose Slaves General-purpose Slaves Environment-resistive Slaves General-
purpose Slaves Analog Slaves
Remote I/O Terminals MIL Connector
Termi nals Board Terminals Screw-less Clamp Terminals Environment-resistive Terminals e-con
Connector
Terminals
Analog I/O Terminals
Temperature
Input
Terminals
Type Models with Transistors Model with
Relay Outputs
Models with 3-tier
Terminal Blocks
Models with
Transistors
Models with MIL
Connectors
Models with Transistors
With Detection Functions
Models with Transistors
Without Detection Functions
Models with Transistors
With Detection Functions
Models with Transistors
Without Detection Functions
Model DRT2-
@D16(-1)
DRT2-
@D08(-1)
DRT2-
MD16(-1)
DRT2-
ROS16 DRT2-@D16TA(-1)
DRT2-@D32ML(-1)
DRT2-@D16ML(-1)
DRT2-@D16MLX(-1)
DRT2-@D32B(-1)
DRT2-@D32BV(-1) DRT2-@D32SLH(-1) DRT2-@D32SL(-1) DRT2-@D08C(-1)
DRT2-@D16C(-1)
DRT2-@D04CL(-1)
DRT2-@D08CL(-1)
DRT2-@D16CL(-1)
DRT2-
@D16S(-1)
DRT2-
AD04
DRT2-
AD04H
DRT2-
DA02 DRT2-TS04@
I/O classification Input Output Input Output Input/
output Output Input Output Input/
output Input Output Input/
output Input Output Input/
output Input Output Input/
output Input Output Input/
output Input Output Input Output Input/
output Input Input/
output Input Output Input
Operating time monitor ❍ (Inputs and
outputs only) --- ❍❍❍❍❍ ❍ --- ❍--- ❍--- ---
Contact operation count monitor ❍❍❍❍ ❍❍--- ---
Unit conduction time monitor ❍❍❍❍ ❍❍❍❍
Total RUN (ON) time monitor ❍❍❍❍ ❍❍--- ---
Unit comment ❍❍❍❍ ❍❍❍❍
Connected device comment ❍❍❍❍ ❍❍❍❍
Network power voltage monitor ❍❍❍❍ ❍❍❍❍
I/O power status monitor ❍--- ❍❍❍ ❍ ❍ --- --- ---
Communications error history monitor ❍❍❍❍ ❍❍❍❍
Input filter ❍--- ❍--- ❍--- ❍--- ❍❍--- ❍❍--- ❍❍ --- ❍--- ❍❍ --- ❍--- ❍❍ --- ---
Prevention of malfunctions due to
sensor inrush current ❍--- ❍--- ❍--- ❍--- ❍❍--- ❍❍--- ❍❍ --- ❍--- ❍❍ --- ❍--- ❍❍ --- ---
Sensor power short-circuit detection --- --- --- ❍--- ❍--- ❍--- ❍--- ---
External load short-circuit detection --- --- --- --- ❍ (See note.) --- --- ❍--- --- ❍--- ---
Sensor disconnection detection --- --- --- ❍--- ❍--- ❍--- --- --- ---
External load disconnection detection --- --- --- --- ❍❍ --- --- --- --- ---
Removable terminal blocks ❍--- --- ❍--- --- ❍❍
Automatic baud rate detection ❍❍❍❍ ❍❍❍❍
Unit power supply wiring not required ❍❍❍❍ ❍❍❍❍
Power supply wiring not required for
input devices --- --- --- --- ❍--- ❍--- ---
Expansion I/O Units mountable ❍--- ❍--- --- --- --- --- --- --- ---
Scaling --- --- --- --- --- --- ❍❍
User calibration --- --- --- --- --- --- ❍❍
Last maintenance date ❍❍❍❍ ❍❍❍❍
Integral function --- --- --- --- --- --- ❍❍
Moving average processing --- --- --- --- --- --- ❍--- ❍
Number of AD conversion points
setting (conversion cycle) --- --- --- --- --- --- ❍--- ---
Peak/bottom hold --- --- --- --- --- --- ❍--- ❍
Top/valley hold --- --- --- --- --- --- ❍--- ❍
Change rate calculations --- --- --- --- --- --- ❍--- ❍
Comparator function --- --- --- --- --- --- ❍--- ❍
Setting output value for errors --- --- --- --- --- --- --- ❍---
Top/valley count --- --- --- --- --- --- --- ❍
Operating time in a preset
temperature range --- --- --- --- --- --- --- ❍
Temperature difference detection
between input channels --- --- --- --- --- --- --- ❍
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,
catalogs, manuals, brochures and other documents, whether electronic or in
writing, relating to the sale of products or services (collectively, the "Products")
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron
objects to any terms or conditions proposed in Buyer’s purchase order or other
documents which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change with-
out notice by Omron. Omron reserves the right to increase or decrease prices
on any unshipped portions of outstanding orders. Payments for Products are
due net 30 days unless otherwise stated in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices
sent to Buyer after deducting transportation charges, taxes and duties, and will
be allowed only if (i) the invoice is paid according to Omron’s payment terms
and (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or
the maximum legal rate, whichever is less, on any balance not paid within the
stated terms.
5. Orders. Omron will accept no order less than $200 net billing.
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Omron or required to be collected directly or
indirectly by Omron for the manufacture, production, sale, delivery, importa-
tion, consumption or use of the Products sold hereunder (including customs
duties and sales, excise, use, turnover and license taxes) shall be charged to
and remitted by Buyer to Omron.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Omron, Omron reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Omron may (without liabil-
ity and in addition to other remedies) cancel any unshipped portion of Prod-
ucts sold hereunder and stop any Products in transit until Buyer pays all
amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all
unpaid accounts.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:
a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall
constitute delivery to Buyer;
c. All sales and shipments of Products shall be FOB shipping point (unless oth-
erwise stated in writing by Omron), at which point title and risk of loss shall
pass from Omron to Buyer; provided that Omron shall retain a security inter-
est in the Products until the full purchase price is paid;
d. Delivery and shipping dates are estimates only; and
e. Omron will package Products as it deems proper for protection against nor-
mal handling and extra charges apply to special conditions.
12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Omron within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Omron (or such other period expressed
in writing by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Omron further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or oth-
erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-
gation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying
Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
the non-complying Product; provided that in no event shall Omron be responsi-
ble for warranty, repair, indemnity or any other claims or expenses regarding
the Products unless Omron’s analysis confirms that the Products were prop-
erly handled, stored, installed and maintained and not subject to contamina-
tion, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Compa-
nies shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies or any other materials or substances or environ-
ments. Any advice, recommendations or information given orally or in writing,
are not to be construed as an amendment or addition to the above warranty.
See http://oeweb.omron.com or contact your Omron representative for pub-
lished information.
14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual
price of the Product on which liability is asserted.
15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
their employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Omron is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Omron and defend or set-
tle any action brought against such Companies to the extent based on a claim
that any Product made to Buyer specifications infringed intellectual property
rights of another party.
16. Property; Confidentiality. Any intellectual property in the Products is the exclu-
sive property of Omron Companies and Buyer shall not attempt to duplicate it
in any way without the written permission of Omron. Notwithstanding any
charges to Buyer for engineering or tooling, all engineering and tooling shall
remain the exclusive property of Omron. All information and materials supplied
by Omron to Buyer relating to the Products are confidential and proprietary,
and Buyer shall limit distribution thereof to its trusted employees and strictly
prevent disclosure to any third party.
17. Export Controls. Buyer shall comply with all applicable laws, regulations and
licenses regarding (i) export of products or information; (iii) sale of products to
“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
regulated technology or information.
18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
and no course of dealing between Buyer and Omron shall operate as a waiver
of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
without Omron's written consent. (c) Law. These Terms are governed by the
law of the jurisdiction of the home office of the Omron company from which
Buyer is purchasing the Products (without regard to conflict of law princi-
ples). (d) Amendment. These Terms constitute the entire agreement between
Buyer and Omron relating to the Products, and no provision may be changed
or waived unless in writing signed by the parties. (e) Severability
. If any provi-
sion hereof is rendered ineffective or invalid, such provision shall not invalidate
any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice. (g) Definitions. As used
herein, “including” means “including without limitation”; and “Omron Compa-
nies” (or similar words) mean Omron Corporation and any direct or indirect
subsidiary or affiliate thereof.
Certain Precautions on Specifications and Use
1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of the
Product in the Buyer’s application or use of the Product. At Buyer’s request,
Omron will provide applicable third party certification documents identifying
ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Prod-
uct in combination with the end product, machine, system, or other application
or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases but the following is a
non-exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equip-
ment, and installations subject to separate industry or government regulations.
(iv) Systems, machines and equipment that could present a risk to life or prop-
erty. Please know and observe all prohibitions of use applicable to this Prod-
uct.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-
ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Omron Companies shall not be responsible for the
user’s programming of a programmable Product, or any consequence thereof.
3. Performance Data. Data presented in Omron Company websites, catalogs
and other materials is provided as a guide for the user in determining suitabil-
ity and does not constitute a warranty. It may represent the result of Omron’s
test conditions, and the user must correlate it to actual application require-
ments. Actual performance is subject to the Omron’s Warranty and Limitations
of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Omron’s representative at any time
to confirm actual specifications of purchased Product.
5. Errors and Omissions. Information presented by Omron Companies has been
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors or omissions.
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,
catalogs, manuals, brochures and other documents, whether electronic or in
writing, relating to the sale of products or services (collectively, the "Products")
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron
objects to any terms or conditions proposed in Buyer’s purchase order or other
documents which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change with-
out notice by Omron. Omron reserves the right to increase or decrease prices
on any unshipped portions of outstanding orders. Payments for Products are
due net 30 days unless otherwise stated in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices
sent to Buyer after deducting transportation charges, taxes and duties, and will
be allowed only if (i) the invoice is paid according to Omron’s payment terms
and (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or
the maximum legal rate, whichever is less, on any balance not paid within the
stated terms.
5. Orders. Omron will accept no order less than $200 net billing.
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Omron or required to be collected directly or
indirectly by Omron for the manufacture, production, sale, delivery, importa-
tion, consumption or use of the Products sold hereunder (including customs
duties and sales, excise, use, turnover and license taxes) shall be charged to
and remitted by Buyer to Omron.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Omron, Omron reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Omron may (without liabil-
ity and in addition to other remedies) cancel any unshipped portion of Prod-
ucts sold hereunder and stop any Products in transit until Buyer pays all
amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all
unpaid accounts.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:
a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall
constitute delivery to Buyer;
c. All sales and shipments of Products shall be FOB shipping point (unless oth-
erwise stated in writing by Omron), at which point title and risk of loss shall
pass from Omron to Buyer; provided that Omron shall retain a security inter-
est in the Products until the full purchase price is paid;
d. Delivery and shipping dates are estimates only; and
e. Omron will package Products as it deems proper for protection against nor-
mal handling and extra charges apply to special conditions.
12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Omron within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Omron (or such other period expressed
in writing by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Omron further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or oth-
erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-
gation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying
Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
the non-complying Product; provided that in no event shall Omron be responsi-
ble for warranty, repair, indemnity or any other claims or expenses regarding
the Products unless Omron’s analysis confirms that the Products were prop-
erly handled, stored, installed and maintained and not subject to contamina-
tion, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Compa-
nies shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies or any other materials or substances or environ-
ments. Any advice, recommendations or information given orally or in writing,
are not to be construed as an amendment or addition to the above warranty.
See http://www.omron247.com or contact your Omron representative for pub-
lished information.
14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual
price of the Product on which liability is asserted.
15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
their employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Omron is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Omron and defend or set-
tle any action brought against such Companies to the extent based on a claim
that any Product made to Buyer specifications infringed intellectual property
rights of another party.
16. Property; Confidentiality. Any intellectual property in the Products is the exclu-
sive property of Omron Companies and Buyer shall not attempt to duplicate it
in any way without the written permission of Omron. Notwithstanding any
charges to Buyer for engineering or tooling, all engineering and tooling shall
remain the exclusive property of Omron. All information and materials supplied
by Omron to Buyer relating to the Products are confidential and proprietary,
and Buyer shall limit distribution thereof to its trusted employees and strictly
prevent disclosure to any third party.
17. Export Controls. Buyer shall comply with all applicable laws, regulations and
licenses regarding (i) export of products or information; (iii) sale of products to
“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
regulated technology or information.
18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
and no course of dealing between Buyer and Omron shall operate as a waiver
of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
without Omron's written consent. (c) Law. These Terms are governed by the
law of the jurisdiction of the home office of the Omron company from which
Buyer is purchasing the Products (without regard to conflict of law princi-
ples). (d) Amendment. These Terms constitute the entire agreement between
Buyer and Omron relating to the Products, and no provision may be changed
or waived unless in writing signed by the parties. (e) Severability
. If any provi-
sion hereof is rendered ineffective or invalid, such provision shall not invalidate
any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice. (g) Definitions. As used
herein, “including” means “including without limitation”; and “Omron Compa-
nies” (or similar words) mean Omron Corporation and any direct or indirect
subsidiary or affiliate thereof.
Certain Precautions on Specifications and Use
1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of the
Product in the Buyer’s application or use of the Product. At Buyer’s request,
Omron will provide applicable third party certification documents identifying
ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Prod-
uct in combination with the end product, machine, system, or other application
or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases but the following is a
non-exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equip-
ment, and installations subject to separate industry or government regulations.
(iv) Systems, machines and equipment that could present a risk to life or prop-
erty. Please know and observe all prohibitions of use applicable to this Prod-
uct.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-
ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Omron Companies shall not be responsible for the
user’s programming of a programmable Product, or any consequence thereof.
3. Performance Data. Data presented in Omron Company websites, catalogs
and other materials is provided as a guide for the user in determining suitabil-
ity and does not constitute a warranty. It may represent the result of Omron’s
test conditions, and the user must correlate it to actual application require-
ments. Actual performance is subject to the Omron’s Warranty and Limitations
of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Omron’s representative at any time
to confirm actual specifications of purchased Product.
5. Errors and Omissions. Information presented by Omron Companies has been
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors or omissions.
OMRON ELECTRONICS LLC •
THE AMERICAS HEADQUARTERS
Schaumburg, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com
OMRON CANADA, INC. • HEAD OFFICE
Toronto, ON, Canada • 416.286.6465 • 866.986.6766 •
www.omron247.com
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br
OMRON ELECTRONICS MEXICO SA DE CV • HEAD OFFICE
Apodaca, N.L. • 52.811.156.99.10 • 001.800.556.6766 •
mela@omron.com
OMRON ARGENTINA • SALES OFFICE
Cono Sur • 54.11.4783.5300
OMRON CHILE • SALES OFFICE
Santiago • 56.9.9917.3920
OTHER OMRON LATIN AMERICA SALES
54.11.4783.5300
© 2009 Omron Electronics LLC
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Note: This datasheet is provided as a guideline for selecting products. Do not use this document to operate the Unit.
Cat. No.R110-E1-05 1/07 Specifica tions are subject to change witho ut notic e. Printed in U.S.A.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Omron:
DRT2-ID16TA-1 DRT2-OD08C-1 DRT2-ID16S DRT2-ID32SLH DRT2-OD16-1 DRT2-MD32ML DRT2-MD16TA
DRT2-MD32SLH-1 DRT2-OD32ML DRT2-MD32SLH DRT2-ID32ML DRT2-ID32SLH-1 DRT2-MD16TA-1 DRT2-
ID16TA DRT2-OD16TA-1 DRT2-ID16S-1 DRT2-TS04T DRT2-OD08C DRT2-ID32ML-1 DRT2-MD32ML-1 DRT2-
OD32ML-1 DRT2-OD16TA DRT2-OD32SLH DRT2-TS04P DRT2-OD32SLH-1 DRT2-OD32B-1 DRT2-ID32BV
DRT2-MD16CL DRT2-OD08CL DRT2-ID32B DRT2-MD16S DRT2-OD32BV DRT2-ID32BV-1 DRT2-MD16S-1
DRT2-MD16CL-1 DRT2-OD08-1 DRT2-OD04CL-1 DRT2-OD32BV-1 DRT2-MD32BV DRT2-ID16MLX DRT2-
ID16MLX-1 DRT2-OD32B DRT2-OD16MLX DRT2-MD16 DRT2-ID16ML DRT2-OD16ML DRT2-OD08 DRT2-
OD16ML-1 DRT2-WD16CL DRT2-OD08CL-1 DRT2-MD32BV-1 DRT2-WD16CL-1 DRT2-MD32B DRT2-ID16ML-1
DRT2-ID32B-1 DRT2-OD04CL DRT2-MD32B-1 DRT2-MD16-1