TYPE RP13A PUSH-PULL LOCK CONNECTOR Scope RP13A Connector is compact, lighweight, rigid, highly reliable circular connector developed in response to the increasing needs for more compact VTR equipment OA equipment. : The push-pull locking system used for RP13A connector, was designed with thorough consideration for easy handling and offers easy and quick installation/removal operation. The compact yet smart design is suitable for any type of electronic equipment, particularily small-sized electronic equipment. Features r (1) Compact shape will always fit your equipment. (2) Single motion push-pull locking mechanism provides improved quick inserting/extracting capability. High density packaging is also available. (3) Multi-slot key mating guide prevents mis-insertion. \N (4) Outer shell, made of strong glass fiber polycabonate resin, is lighweight yet rigid. (5) As the cable corinection method, crimping is used for plug, and crimping and PCB dip for receptacle. _ 123Material and Finish Part Name Material Finish . UL94V0 Molding and connector body Glass-filled polycarbonate (Black) Pin contact Phosphor bronze Silver plating Socket contact Phosphor bronze . Silver plating ~ Ordering Information RPI3A - 12 PA - 138 C Pp tT CT Ty (1) (2) (3) 4 (1) RP13A : Name of series. (2) 12 : Indicates shell size, or outer dia. of plug mating section. (3) P : Indicates shape of connector as y- follows. P :; Plug R_: Receptacle Jo: Jack (4) A : A, B, C..... are used to dis- tinguish many model types of same shape connectors. (5) 13 : Indicates number of terminals. (6) S : Indicates shape terminal as fol- lows. P ; Male terminal S : Female terminal (7) C : Type of connection method. 124Plug JD A B 3 4 a 5 2; Od 6608 ei|/ Zi a 3 [ eee oe 4a LiL... (An example in shape) HRS No. Part No. No. of A | 81 eC | Weight 113-01824 | RP13A12PA_138C|_ 13 |47.2] 32[61| 6.0g 113-01840 [ RP13A12PB-138C | 13 [47.2] 32/57 | 6.09 1130186-5 | RP13A12PD-138c] 13 [522/371 61| 6.09 11302017 | RP13A12PE-138C| 13 [47.2] 32] 64]| 6.09 11310067 | RP13A12PK-138C| 13 |52.2| 37[7.1| 6.09 11310264 | RP13A12PS138C | 13 | 52.2| 37| 8.1 | 6.09 11302060 | RPi3A12PD15SC| 15 [52.2[ 37] 61 | 6.09 11302192 | RP13A12PK158C| 15 |52.2/ 37] 7.1| 6.09 RP13A12PA13SC 14310104 | RP13A12PP158C |_15 [52.2/ 37/75 | 6.09 11302149 | RP13A12PD20sc | 20 |52.2| 37/61] 6.09 11302108 | RPi3A12PG208C | 20 |52.2/ 37175 | 6.09 11302177 | RP13A12PH208SC| 20 |47.2/ 32|64| 6.09 11310120 | RP13A12PK20SC| 20 [52.2] 37/71 | 6.09 11310070 | RP13A12PO208sc | 20 | 47.2] 32] 47] 6.09 11310223 | RP13Ai2Ps20Ssc | 20 [52.21 37] 8.1] 6.09 L Receptacle (Flange Type) (crime 1 4 (Crimp Type) 3.2. 10 | : f = ||. * 2-B (Metal Flange and Tap) Metal Flange / (An example in shape) HRS No. Part No. No: of A B Weight 113-0183-7 | RP13A12RA13PC | 13 | 18.1 [M2.6x0.45| 4.0g RP13A12RA13PC 113-0207-3 | RP13A-12RA15PC | 15 | 18.1 |M2.6x0.45| 4.09 113-0215-1 | RP13A12RA20PC | 20 16 |M2.6x0.45| 4.0g Remark: For mounting hole size, refer to page 128. (Dip Type) A 18.1 B] 3.2. 10 Li; | 2 i o 2-M2.6X0,45 TT] Lee (Metal Flange and Tap) 0.5X0.3 ; . Metal Flange . Dip post dia, (An example in shape) HRS No. Part No, Now A |B ! Weight 11302020 | RP1Z3A12RA13PA | 13 | 215 | 3 5.0g RP13A12RA13PA 113-1002-6 | RP13A12RA-15PA | 15 | 21.5 | 3 5.0g XY Remark: Refer to page 128 for mounting hole size, and page 131 for dip post layout size. , S 125Receptacle(Jam nut fastening type) {- (Crimp Type) RP13A-12RB-13PC 18.1 1 9 _S | oD = S <<F M12x1 No, . HRS No. Part No. ene) | Weight 113-0185-2 | RP13A12RB13PC 13 2.59 Remark: For mounting hole size, refer to page 128. ( (Dip Type) RP13A-12RB-13PA \ Right Angle Dip B = | - = om a= 0.50.3 / ar Dip post dia. M12xX1 HRS No. Part No. A | B [No.of | Weight pins 113-0203-2 | RPI3A12RB-13PA [215| 3 | 13 | 3.59 Remark: Refer to page 128 for mounting hole size and page 131 for dip . post layout size, 126 E 18 SS y (Note) @1.5 Max ( & 4 1 = +4 8 +4444] < Nein! 4] 6 + b+ 4 so 120 Ww a igi) + | VET Y pip post dia. OD 3.5 (An example in shape) (center hole for connector mounting) Note: Set up the mounting panel thickness less than 1.5mm, mounting whole more than 15mm. RP13A-~12RC-20PB Nor or HRS No. Part No, pins A |B | c {op]{ | F | Weight 113-1020-8 | RP13A12RC-13PB | 13 |17.5| 85] 35 |0.64/23.5| 13 | 4.09 113-0211-0 | RP13A12RC-20PB | 20 | 19.5| 10.5] 3 0.6 | 31.5] 15 | 5.09 Remark: For dip post layout size, refer to page 131. S)Jack RP13A12J13PC -_~ a o 4 A o e666] Ss Q & (An example in shape) HRS No. Part No. Now A | 8 | @C | Weight 1130166-8 | RP13A12J13PC 13. 1491) 346| 61 | 4.59 113-1005-4 | RPI3A-12JD15PC| 15 [54.1 | 39.6] 61 | 45g 113--0218-0 | RP13A12JK15Pc| 15 |[541|396| 91 | 459 113-1004-1 | RP13A-12/G-20PC| 20 |526/37.4| 74 | 4.59 ) 127Contact ; f Male Pin eA Female Pin fpA aS oe oe A | | A Cc D Section A-A D Section A-A (An example in shape) (An example in shape) For 13 and 15 contacts Tool T HRS No. Part No. tl Bpi/clole ble wire Type HRS No. Part No. Plating B Cc 0 E Applicable wire ype art No. Plating pplicapee wh Loose Loose | 113-0363-9 |RP13A-SC-121| Part gold | 1.2 | 1.35|13.9] 1.4 | AWG#24~ #28 piece | 11870179-0 | AP13-PO-122 | Silver | 1.2 | 1.95] 13.9] 1.4 | AWG#24~#28 |Iplece |"143-o181-1 |RP13A-SC-122| Silver | 1.2 |1.95|139| 14 | awa#2a~#28 Chain | 113-0360-0 | RP13-PC-221 | Part gold | 1.2 | 1.35/13.9| 1.4 | AWG#24~ #28 || Chain | 113-0862-6 |RP13A-SC-221| Part gold | 1.2 | 1.35|13.9| 1.4 | AWG#24~ #28 contact | 443-0141-7 | RP13-PC-222 | Silver | 1.2 |1.35)19.9] 1.4 | AWG#24~#28 || Contact) 113-0151-0 [RP13A-SC-222| Silver_| 1.2 | 1.85] 13.9| 1.4 | AWG#24~ #28 13 for superthick wires (can be used for termina! nos. 12 and 13 only) Type HRS No. Part No. Plating B c D E Applicable wire Type HRS No. Part No. Plating B C D E Applicable wire lees 113-0178-7 | RP13-PC-112 Silver 1.6 | 21 113.9] 1.4 | AWG#18~#22 Floss 113-0180-9 |RP13A-SC-112 Sliver 1.6 | 21 |13.9] 1.4] AWG#18~#22 Chain 113-0140-4 | RP13-PC-212 Silver 1.6] 21/139] 1.4] AWG#18~#22 Chain 118-0150-8 |RP1SA-PC-212 Silver 1.6 | 21/139] 1.4] AWG#18~#22 contact contact For 20 contacts Type HRS No. Part No. Plating Bi} Cc |]D]E Applicable wire Type HRS No. Part No. Plating B l/c |] oD E | Applicable wire Close 113-0268-8 | RP19-PC-122| Silver | 1.2 [1.35] 12 |1.18] AWG#24~#30 Bloce 443-0270-0 | RP19-SC-122] Silver | 1.2 |1.95| 11 | 1.18] Awa#24~#30 contact 113-0264-7 | RP19-PC-222} Silver | 1.2 [1.35] 12 | 1.18) AWG#24~#30 chain 113-0266-2 | RP19-Sc-122 | silver | 1.2 | 1.35] 11 | 1.18] AWG#24~#30 Notes 1: Use connectors with gold-plated terminals if the connectors will be subjected to constant vibration. ' 2: Loose terminals are available in packs of 100 pieces. Chain terminals are available in reels of 10,000 pieces. /) Mounting Cutout a | | OY Flange Type Jam Nut Type e Applicable Connector e Applicable Connector Mounting hole HRS No. Part No HRS No. Part No. . . - dimension 6A 113-0185-2 | RP13A12RB13PC 113-0183-7 | RP13A12RA13PC 3 11302032 RP13A12RB13PA 11302020 | RP13A12RA13PA 3 11302073 | RP13A12RA15PC 3 1131002-6 | RP13A12RA--15PA 3 11302151 RP13A12RA20PC 3 Note . maximum 2.7 mm because this type is mounted on the back 1. Above appearance shows the panel surface and the mating key surface of panel. is located on top position. 3. The applicable panel thickness for a hexagon nut fastening em applicable panel thickness for a flange type receptacle is type is maximum 5 mm and minimum 1mm. SS) 128RP13A ELECTROSTATIC PROTECTION TYPE RP13A Electrostatic Protection Type Connector uses male standard connector.) contacts for plug and female connects for receptacle. While using the electrostatic protection type and the Please note that there is NO INTERCHANGEABILITY standard type in parallel, any error shall be occurred due to with standard type RP13A connectors previously intro- different terminal connectors, so assorted usage with duced. (Crimping terminals also differ from those of the | standard type are widely extended. Plug ( 47.2 ~ 32 8 wa st oO t & a a 7 2 | 6666] S\s = ~ oe0 A] Ie (An example in shape) HRS No. Part No. None Weight RP13A-12PA-13PC 1134003-5 | RP13A12PA13PC | 13 6.0g NY : / Receptacle Flange Type (Crimp Type) 15 12 sr mm i . $2.8 hole (Metal Flange) Press-fitted metal flange / (An example in shape) : No. of . RP13A-12R-13SC HRS No. Part No. Pin Weight 11340022 RP13A12R-13S8C | 13 4.0g Remark: For the mounting holes, see page 130. 129Contact Applicable . Type HRS No. Part No. B Cc D E ; (Male Pin) wire Loose _ . pre AWG#24~ _ Content | 113-0268-8 | RP19-PC-122 | 1.2] 1.35 | 12 | 1.18 eo A ; 1413-02634 | RP19-Pc-212 | 14.6] 21 | 12 | 1.18 AWa# Ie af - >} Chain fx} x) contact AWGH24~ 113-0264-7 | RP19-PC-222 | 1.2| 4.35 | 12 | 4.18 FA | Lc #30 D Section A-A (Female Pin) ADDIOMbIe Type HRS No. Part No. B/ Cc} D|e {Pr Loose _nopne, en. AWG #24~ pA Contant | 113-0270-0 | RP19-Sc-122 | 1.2] 1.35 | 11 | 1.18 feo AWG#18~ | } 113-0265-0 | RP19-sc-212 | 14.6] 21 | 11] 1.18 ta | coe, m Chain #22 contact ~ | b A | LC 113-0266-2 | RP19-SC-222 | 1.2] 1.95 | 11 | 1.18 AWGH Re D Section A-A (Note 1) Loose piece terminals are offered in a package containing 100 pieces, and strip terminal by reel containing 10,000 pieces. Contacts of applicable cables AWG#18 to #22 can be used only for terminals 12 and 13. Cannot be used for other terminal numbers, {Note 2) Use applicable cables AWG#18 to #22 having outer dia. of insulator 61.79 and under, a and AWG#24 to #30 cables $1.15 and under. Receptacle Mounting Hole Dimensions (Electrostatic Protection Type) or / 2 -M2.6X0.45 (Flange Type) (Note 1) Above figure shows arrangement viewed from panel face. Mating guide of flanged type is positioned above, (Note 2) For receptacle of flanged type, connector is inserted from back side of panel. Up to 4.7mm thick panel can be used. 130Receptacle Dip Post Layout 7 13 Conductor 3.45 3.45 2.3 00.6 (13 places) f 13 Conductor (Right-angle Type) Use self-tapping screw CL for JIS B 1122 M3 ih (Threaded hole for mounting connector) e--4 0.9 ws) (13 places) N nN N 1.15 if 1,15 1.4 1.4 2.3 2.3 3.45 3.45 _ 15 Conductor 0.6 (15 places) an N mn oS 2.75 Note: 1. Figures of 13 and 15-conductor connectors are viewing from the mating side of receptacle. 2. Applicable atfowance of panel layout: +0.05 mm. 20 Conductor (Right-angle Type) Use self-tapping screw C.L for JIS B 1122 M3 (Threaded hole for i mounting connector) Ty (Ty WQ WY a My 18 20 7 19] 16 | ol 5 73 15 ~ 12 14| [10 es 7 40.85 9 ny (20 placesy\\ |o4H! , S | 0.8 31 los 2.4 2.4 4 4 Note: 1. Above figure shows PCB face viewing from the mating face of receptacle. 2. Applicable allowance of panel layout: 0.05 mm. 131Tools 132 Type Item HRS No. Part No. Applicable terminal Applicable wire 150-0024-3 RP13-TC-11 RP13-PC-112 AWGH18~ #22 150-0025-6 | RP13-TC-12 RP13-PC-135 AWG # 24~ #28 150-0026-9 RP13A-TC-11 RP13A-SC-112 AWG#18~ #22 Manual _Manual 150-0027-1 RP13A-TC-12 RP13A-SC-12 4 AWG # 24~ # 28 crimping tool 150-0048-1 | RP19-TC-11 Pies iee AWG #24~ #28 150-0049-4 | RP-19-TC-12 AP ig Sector AWG#24~ #28 Automatic 5, -0005-4 _ _ crimping body 901-0005 CM~105 901-2024-0 | AP105-RP13-2 PPA SOB pose AWG # 24~ #28 Automatic RP19-P : Applicator | 901-2013-3 | apios-APio-1 | ppred Cel, AWG# 18~ #22 901-2014-6 | AP105-RP19-2 Able Secoee AWG#24~ #28 150-0070-0 RP13A-TC-01 _ $73, $83 Cable crimping tool 150-0071-3 RP13A-TC-02 $75, O86 150-0021-5 RP13-PC-TP Male terminal _ Extractor 150-0022-8 RP13A-SC-TP Female terminal _ 150-0039-0 RP6-SC-TP Male/temale terminal for RP19 _ RP13A-TC-02 Cable Crimping Tool RP13PCTP RP13TC-11 Hand Crimping Tool RP6SCTP Extraction Tools RP13ASCTP Auto Crimp Tool CM-105Assembling Procedure Plug Cable Cord can Screw Visual arrow mark section A Spring Coupling A Cable Bushing N Clamp S| fo =| | ] a T io cols Ee, IS A] on os Plug Housing XN Fit the body, spring, coupling and bushing respectively in advance on wires having ends suitably treated, and then connect wires to terminals by crimp. Then mount crimped contacts into the plug housing. After mounting, pull the wire slightly and make sure the contact is mounted. Fix a cable clamper to the bushing, insert it into the plug housing, and then crimp cable clamper with Hand Clamping Tooi. Assemble coupling, spring and body respectively to plug housing, and mount it with the attached screw by means of torque wrench (2 kg-cm), and the work is completed. Put the cable bushing over the clamp body to complete the job. 133Terminal Arrangement and Performance 134 (~ (Standard Type) Pinout 1514 13 No of pin 13 15 20 Withstanding voltage AC 300 a minute AC 300 a minute AC 300 a minute Current rating 2A (AWG #24) 2A (AWG #24) 2A (AWG #24) Insulation 1000 MQ2 max (DC 250V) 1000 M22 min (DC 250V) 1000 MQ min (DC 250V) Contact 15 mQ min (DC 1A) 15 mQ max (DC 1A) 30 mQ. max (DC 1A) Applicable wire AWG #18 ~ #22 (insulation 1.9) Conformity terminal No.12, 13 AWG #24 ~ #28 (insulation 1.4) AWG #24 ~ #28 | (insulation @ 1.4) Conformity terminal No.1~11 AWG #24 ~ #20 (insulation @ 1.15) (Electrostatic Protection Type) Pinout Positions 13 Withstanding voltage AC 300 a minute Current 2A (AWG #22) Insulation 1000 MQ min (DC 250V) Contact 15 mQ max (DC 1A) AWG #18 ~ #22 (insulation @ 1.79) Wire Conformity terminal No. 12, 13 AWG #24 ~ #30 (insulation 1.15) Conformity terminal No. 1 ~ 11 (Remarks) 1. receptacle and jack. 2, Withstanding voltage is shown by testing voltage. Above figure shows arrangement viewed from the mating face (cable connection side) of