PD - 91523A IRF9530NS/L HEXFET(R) Power MOSFET Advanced Process Technology Surface Mount (IRF9530NS) l Low-profile through-hole (IRF9530NL) l 175C Operating Temperature l Fast Switching l P-Channel l Fully Avalanche Rated Description l D l VDSS = -100V RDS(on) = 0.20 G Fifth Generation HEXFETs from International Rectifier utilize advanced processing techniques to achieve extremely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET Power MOSFETs are well known for, provides the designer with an extremely efficient and reliable device for use in a wide variety of applications. The D2Pak is a surface mount power package capable of accommodating die sizes up to HEX-4. It provides the highest power capability and the lowest possible onresistance in any existing surface mount package. The D2Pak is suitable for high current applications because of its low internal connection resistance and can dissipate up to 2.0W in a typical surface mount application. The through-hole version (IRF9530NL) is available for lowprofile applications. ID = -14A S D 2 P ak T O -26 2 Absolute Maximum Ratings Parameter ID @ TC = 25C ID @ TC = 100C IDM PD @TA = 25C PD @TC = 25C VGS EAS IAR EAR dv/dt TJ TSTG Continuous Drain Current, VGS @ -10V Continuous Drain Current, VGS @ -10V Pulsed Drain Current Power Dissipation Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds Max. Units -14 -10 -56 3.8 79 0.53 20 250 -8.4 7.9 -5.0 -55 to + 175 A W W W/C V mJ A mJ V/ns C 300 (1.6mm from case ) Thermal Resistance Parameter RJC RJA Junction-to-Case Junction-to-Ambient ( PCB Mounted,steady-state)** Typ. Max. Units --- --- 1.9 40 C/W 5/13/98 IRF9530NS/L Electrical Characteristics @ TJ = 25C (unless otherwise specified) Parameter Drain-to-Source Breakdown Voltage V(BR)DSS/TJ Breakdown Voltage Temp. Coefficient RDS(on) Static Drain-to-Source On-Resistance VGS(th) Gate Threshold Voltage gfs Forward Transconductance Qg Qgs Qgd td(on) tr td(off) tf Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Min. -100 --- --- -2.0 3.2 --- --- --- --- --- --- --- --- --- --- --- Typ. --- -0.11 --- --- --- --- --- --- --- --- --- --- 15 58 45 46 LS Internal Source Inductance --- 7.5 Ciss Coss Crss Input Capacitance Output Capacitance Reverse Transfer Capacitance --- --- --- 760 260 170 V(BR)DSS IDSS IGSS Drain-to-Source Leakage Current Max. Units Conditions --- V VGS = 0V, ID = -250A --- V/C Reference to 25C, ID = -1mA 0.20 VGS = -10V, ID = -8.4A -4.0 V VDS = VGS, ID = -250A --- S VDS = -50V, ID = -8.4A -25 VDS = -100V, VGS = 0V A -250 VDS = -80V, VGS = 0V, TJ = 150C 100 VGS = 20V nA -100 VGS = -20V 58 ID = -8.4A 8.3 nC VDS = -80V 32 VGS = -10V, See Fig. 6 and 13 --- VDD = -50V --- ID = -8.4A ns --- RG = 9.1 --- RD = 6.2, See Fig. 10 Between lead, nH --- and center of die contact --- VGS = 0V --- pF VDS = -25V --- = 1.0MHz, See Fig. 5 Source-Drain Ratings and Characteristics IS I SM V SD t rr Q rr ton Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time Min. Typ. Max. Units Conditions D MOSFET symbol --- --- -14 showing the A G integral reverse --- --- -56 p-n junction diode. S --- --- -1.6 V TJ = 25C, IS = -8.4A, VGS = 0V --- 130 190 ns TJ = 25C, IF = -8.4A --- 650 970 nC di/dt = -100A/s Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) Notes: Repetitive rating; pulse width limited by Pulse width 300s; duty cycle 2%. max. junction temperature. ( See fig. 11 ) Starting TJ = 25C, L =7.0mH Uses IRF9530N data and test conditions RG = 25, IAS = -8.4A. (See Figure 12) ISD -8.4A, di/dt -490A/s, VDD V(BR)DSS, TJ 175C ** When mounted on 1" square PCB (FR-4 or G-10 Material ). For recommended footprint and soldering techniques refer to application note #AN-994. IRF9530NS/L 100 100 VGS - 15V - 10V - 8.0V - 7.0V - 6.0V - 5.5V - 5.0V BOTTOM - 4.5V VGS - 15V - 10V - 8.0V - 7.0V - 6.0V - 5.5V - 5.0V BOTTOM - 4.5V TOP -ID , Drain-to-Source Current (A ) -ID , D rain-to-S ource C urrent (A ) TOP 10 -4 .5V 1 20 s P U L S E W ID TH TJc == 25C 25 C A 0.1 0.1 1 10 10 -4.5V 1 2 0 s P U LS E W ID TH TTCJ == 175C 1 75 C 0.1 100 0.1 -VD S , D rain-to-S ource V oltage (V ) T J = 2 5 C 10 TJ = 1 7 5 C 1 V DS = -5 0 V 2 0 s P U L S E W ID TH 6 7 8 9 -VG S , Ga te -to-Source Volta ge (V) Fig 3. Typical Transfer Characteristics 10 A R DS(on) , Drain-to-Source On Resistance (Normalized) -I D , D rain-to -So urc e C urre nt (A ) 2.5 5 A 100 Fig 2. Typical Output Characteristics 100 4 10 -VD S , D rain-to-S ource V oltage (V ) Fig 1. Typical Output Characteristics 0.1 1 ID = -14A 2.0 1.5 1.0 0.5 0.0 -60 -40 -20 VGS = -10V 0 20 40 60 80 100 120 140 160 180 TJ , Junction Temperature ( C) Fig 4. Normalized On-Resistance Vs. Temperature IRF9530NS/L V GS C iss C rs s C o ss C , Capacitance (pF) 1600 1200 = = = = 20 0V , f = 1MHz C g s + C g d , C d s S H O R TE D C gd C ds + C g d -VGS , Gate-to-Source Voltage (V) 2000 C iss 800 C oss C rss 400 0 A 1 10 ID = -8.4A 15 10 5 FOR TEST CIRCUIT SEE FIGURE 13 0 0 100 10 20 30 40 50 60 QG , Total Gate Charge (nC) -VD S , D rain-to-S ourc e V oltage (V ) Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage 100 1000 OPERATION IN THIS AREA LIMITED BY RDS(on) T J = 15 0C -II D , Drain Current (A) -I SD , Reverse D rain Current (A ) VDS = -80V VDS = -50V VDS = -20V 10 100 T J = 2 5C 1 10us 100us 10 1ms VG S = 0 V 0.1 0.4 0.6 0.8 1.0 1.2 1.4 -VS D , S ourc e-to-D rain V oltage (V ) Fig 7. Typical Source-Drain Diode Forward Voltage A 1.6 TC = 25 C TJ = 175 C Single Pulse 1 1 10ms 10 100 -VDS , Drain-to-Source Voltage (V) Fig 8. Maximum Safe Operating Area 1000 IRF9530NS/L 14 RD VDS -I D , Drain Current (A) 12 VGS D.U.T. RG 10 + 8 V DD -10V Pulse Width 1 s Duty Factor 0.1 % 6 Fig 10a. Switching Time Test Circuit 4 td(on) 2 tr t d(off) tf VGS 10% 0 25 50 75 100 125 150 175 TC , Case Temperature ( C) 90% Fig 9. Maximum Drain Current Vs. Case Temperature VDS Fig 10b. Switching Time Waveforms T herm al R es pons e (Z th J C ) 10 1 D = 0 .5 0 0 .2 0 0 .1 0 PD M 0 .0 5 0.1 0 .0 2 0 .0 1 t 1 t S IN G L E P U L S E (T H E R M A L R E S P O N S E ) 0.01 0.00001 N o te s: 1 . D u ty fa c to r D = t 1 / t 2 2 2. P e a k TJ = P D M x Z th JC + T C 0.0001 0.001 0.01 0.1 t 1 , R e c ta n g ula r P u lse D u ratio n (s e c ) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case A 1 IRF9530NS/L 700 ID -3.4A -5.9A BOTTOM -8.4A D .U .T RG -2 0 V tp VD D A IA S D R IV E R 0 .0 1 15V Fig 12a. Unclamped Inductive Test Circuit EAS , Single Pulse Avalanche Energy (mJ) L VDS TOP 600 500 400 300 200 100 0 25 50 75 100 125 150 Starting TJ , Junction Temperature ( C) IAS Fig 12c. Maximum Avalanche Energy Vs. Drain Current tp V (BR)DSS Fig 12b. Unclamped Inductive Waveforms Current Regulator Same Type as D.U.T. 50K QG 12V .3F -10V QGS .2F QGD D.U.T. +VDS VGS VG -3mA Charge Fig 13a. Basic Gate Charge Waveform IG ID Current Sampling Resistors Fig 13b. Gate Charge Test Circuit 175 IRF9530NS/L Peak Diode Recovery dv/dt Test Circuit + D.U.T* Circuit Layout Considerations * Low Stray Inductance * Ground Plane * Low Leakage Inductance Current Transformer + - - + * dv/dt controlled by RG * ISD controlled by Duty Factor "D" * D.U.T. - Device Under Test RG VGS * + - VDD Reverse Polarity of D.U.T for P-Channel Driver Gate Drive P.W. D= Period P.W. Period [VGS=10V ] *** D.U.T. ISD Waveform Reverse Recovery Current Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt Re-Applied Voltage Body Diode [VDD] Forward Drop Inductor Curent Ripple 5% *** VGS = 5.0V for Logic Level and 3V Drive Devices Fig 14. For P-Channel HEXFETS [ ISD ] IRF9530NS/L D2Pak Package Outline 1 0.54 (.4 15) 1 0.29 (.4 05) 1.4 0 (.055 ) M AX. -A- 1.3 2 (.05 2) 1.2 2 (.04 8) 2 1.7 8 (.07 0) 1.2 7 (.05 0) 1 1 0.16 (.4 00 ) RE F. -B - 4.69 (.1 85) 4.20 (.1 65) 6.47 (.2 55 ) 6.18 (.2 43 ) 3 15 .4 9 (.6 10) 14 .7 3 (.5 80) 2.7 9 (.110 ) 2.2 9 (.090 ) 2.61 (.1 03 ) 2.32 (.0 91 ) 5 .28 (.20 8) 4 .78 (.18 8) 3X 1.40 (.0 55) 1.14 (.0 45) 5 .08 (.20 0) 0.5 5 (.022 ) 0.4 6 (.018 ) 0 .93 (.03 7 ) 3X 0 .69 (.02 7 ) 0 .25 (.01 0 ) M 8.8 9 (.3 50 ) R E F. 1.3 9 (.0 5 5) 1.1 4 (.0 4 5) B A M M IN IM U M R E CO M M E ND E D F O O TP R IN T 1 1.43 (.4 50 ) NO TE S: 1 D IM EN S IO N S A FTER SO L D ER D IP. 2 D IM EN S IO N IN G & TO LE RA N C IN G PE R A N S I Y1 4.5M , 198 2. 3 C O N TRO L LIN G D IM EN SIO N : IN C H . 4 H E ATSINK & L EA D D IM EN S IO N S D O N O T IN C LU D E B UR R S. LE A D A SS IG N M E N TS 1 - G A TE 2 - D R AIN 3 - S O U RC E 8.89 (.3 50 ) 17 .78 (.70 0) 3 .8 1 (.15 0) 2 .08 (.08 2) 2X Part Marking Information D2Pak IN TE R N A TIO N A L R E C T IF IE R LO G O A S S E M B LY LO T C O D E A PART NUM BER F530S 9 24 6 9B 1M DATE CODE (Y YW W ) YY = Y E A R W W = W EEK 2.5 4 (.100 ) 2X IRF9530NS/L Package Outline TO-262 Outline Part Marking Information TO-262 IRF9530NS/L Tape & Reel Information D2Pak TR R 1 .6 0 (.0 6 3 ) 1 .5 0 (.0 5 9 ) 4 .1 0 (.1 6 1 ) 3 .9 0 (.1 5 3 ) F E E D D IRE CTIO N 1 .8 5 (.0 7 3 ) 1 .6 5 (.0 6 5 ) 1 .60 (.06 3) 1 .50 (.05 9) 1 1 .6 0 (.4 5 7 ) 1 1 .4 0 (.4 4 9 ) 0 .3 68 (.0 1 4 5 ) 0 .3 42 (.0 1 3 5 ) 1 5 .4 2 (.6 0 9 ) 1 5 .2 2 (.6 0 1 ) 2 4 .3 0 (.9 5 7 ) 2 3 .9 0 (.9 4 1 ) TR L 10 .9 0 (.42 9) 10 .7 0 (.42 1) 1 .75 (.06 9 ) 1 .25 (.04 9 ) 4 .7 2 (.1 3 6) 4 .5 2 (.1 7 8) 16 .10 (.63 4 ) 15 .90 (.62 6 ) F E E D D IRE C TIO N 13.50 (.532 ) 12.80 (.504 ) 2 7.4 0 (1.079) 2 3.9 0 (.9 41) 4 33 0.00 (1 4.1 73) MA X. NO TES : 1. C O M F O R M S TO E IA -4 18. 2. C O N TR O LLIN G D IM E N S IO N : M ILL IM ET ER . 3. D IM E N S IO N ME A S U R E D @ H U B . 4. IN C LU D E S F LA N G E D IS TO R T IO N @ O U T E R E D G E . 60.00 (2.3 62) MIN . 26 .40 (1.03 9) 24 .40 (.961 ) 3 3 0.40 (1.1 97) MAX. 4 WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 322 3331 EUROPEAN HEADQUARTERS: Hurst Green, Oxted, Surrey RH8 9BB, UK Tel: ++ 44 1883 732020 IR CANADA: 7321 Victoria Park Ave., Suite 201, Markham, Ontario L3R 2Z8, Tel: (905) 475 1897 IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg Tel: ++ 49 6172 96590 IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: ++ 39 11 451 0111 IR FAR EAST: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo Japan 171 Tel: 81 3 3983 0086 IR SOUTHEAST ASIA: 315 Outram Road, #10-02 Tan Boon Liat Building, Singapore 0316 Tel: 65 221 8371 http://www.irf.com/ Data and specifications subject to change without notice. 5/98 Note: For the most current drawings please refer to the IR website at: http://www.irf.com/package/