MILITARY DATA SHEET Original Creation Date: 05/06/96 Last Update Date: 07/30/96 Last Major Revision Date: 05/06/96 MN54F413-X REV 1A0 64 X 4 FIRST-IN FIRST OUT BUFFER MEMORY WITH PARALLEL I/O General Description The F413 is an expandable fall-through type high-speed First-In First-Out (FIFO) buffer memory organized as 64 words by four bits. The 4-bit input and output registers record and transmit, respectively, asynchronous data in parallel form. Control pins on the input and output allow for handshaking and expansion. The 4-bit wide, 62-bit deep fall-through stack has self-contained control logic. Industry Part Number NS Part Numbers 54F413 54F413DMQB 54F413FMQB 54F413LMQB Prime Die M413 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MN54F413-X REV 1A0 Features - Separate input and Parallel input and Expandable without 15MHz data rate Supply current 160 Available in SOIC, output clocks output external logic mA max (300 mil only) 2 MILITARY DATA SHEET MN54F413-X REV 1A0 (Absolute Maximum Ratings) (Note 1) Storage Temperature -65C to +150C Ambient Temperature under Bias -55C to +125C Junction Temperature under Bias -55C to +175C Vcc Pin Potential to Ground Pin -0.5V to +7.0V Input Voltage (Note 2) -0.5V to +7.0V Input Current (Note 2) -30mA to +5.0mA Voltage Applied to Output in HIGH State (with Vcc=0V) Standard Output TRI-STATE Output Current Applied to Output in LOW State (Max) -0.5V to Vcc -0.5V to +7.0V twice the rated Iol(mA) Note 1: Note 2: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Either voltage limit or current limit is sufficient to protect inputs. Recommended Operating Conditions Free Air Ambient Temperature Commercial Military Supply Voltage Military Commercial 0 C to +70 C -55 C to +125 C +4.5V to +5.5V +4.5V to +5.5V 3 MILITARY DATA SHEET MN54F413-X REV 1A0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp range:-55C to 125C AC: FIGS. SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS IIH Input High Current VCC=5.5V, VM=2.7V, VINH=5.5V, VINL=0.0V 1, 3 INPUTS 20 uA 1, 2, 3 IBVI Input High Current VCC=5.5V, VM=7.0V, VINH=5.5V, VINL=0.0V 1, 3 INPUTS 100 uA 1, 2, 3 IIL Input LOW Current VCC=5.5V, VM=0.5V, VINH=5.5V, VINL=0.0V 1, 3 INPUTS -0.4 mA 1, 2, 3 VOL Output LOW Voltage VCC=4.5V, VIL=0.8V, IOL=8.0mA, VIH=2.0V, VINH=5.5V, VINL=0.0V 1, 3 OUTPUTS 0.5 V 1, 2, 3 VOH Output HIGH Voltage VCC=4.5V, VIH=2.0V, IOH=-1.0mA, VIL=0.8V, VINL=0.0V, VINH=5.5 1, 3 OUTPUTS 2.4 V 1, 2, 3 IOS Output Short-Circuit Current VCC=5.5V, VINH=5.5V, VM=0.0V, VINL=0.0V 1, 3 OUTPUTS -20 -130 mA 1, 2, 3 VCD Input Clamp Diode Voltage VCC=4.5V, IM=-18mA, VINH=5.5V, VINL=0.0V 1, 3 INPUTS -1.5 V 1, 2, 3 ICC Power Supply Current VCC=5.5V, VINH=5.5V, VINL=0.0V 1, 3 VCC 160 mA 1, 2, 3 ICEX Output HIGH Leakage Current VCC=5.5V, VINH=5.5V, VINL=0.0V, VM=5.5V 1, 3 OUTPUTS 250 uA 1, 2, 3 AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS FIGS. tpLH(1) tpHL(1) tpLH(2) tpHL(2) Propagation Delay Propagation Delay Propagation Delay Propagation Delay VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 4 2, 4 SI to IR 1.5 44.0 ns 9 2, 4 SI to IR 1.5 50.0 ns 10, 11 2, 4 SI to IR 1.5 31.0 ns 9 2, 4 SI to IR 1.5 37.0 ns 10, 11 2, 4 SO to OR 1.5 52.0 ns 9 2, 4 SO to OR 1.5 57.0 ns 10, 11 2, 4 SO to OR 1.5 31.0 ns 9 2, 4 SO to OR 1.5 37.0 ns 10, 11 MILITARY DATA SHEET MN54F413-X REV 1A0 Electrical Characteristics AC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS FIGS. SYMBOL tpLH(3) tpHL(3) tpLH(4) tpHL(4) PARAMETER Propagation Delay Propagation Delay Propagation Delay Propagation Delay CONDITIONS NOTES VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C PINNAME MIN MAX UNIT SUBGROUPS 2, 4 SO to On 1.5 46.0 ns 9 2, 4 SO to On 1.5 52.0 ns 10, 11 2, 4 SO to On 1.5 34.0 ns 9 2, 4 SO to On 1.5 39.0 ns 10, 11 2, 4 MR to IR 1.5 27.0 ns 9 2, 4 MR to IR 1.5 33.0 ns 10, 11 2, 4 MR to OR 1.5 30.0 ns 9 2, 4 MR to OR 1.5 34.0 ns 10, 11 ts(H/L) Setup Time HIGH or LOW VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 Dn to SI 1.0 ns 9, 10, 11 th(H/L) Hold Time or LOW VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 Dn to SI 10.0 ns 9, 10, 11 tw(H)(1) Pulse Width VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 SI Pulse Width 5.0 ns 9, 10, 11 tw(L)(1) Pulse Width VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 SI Pulse Width 10.0 ns 9, 10, 11 tw(H)(2) Pulse Width VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 SO Pulse Width 7.5 ns 9 5 SO Pulse Width 8.5 ns 10, 11 HIGH tw(L)(2) Pulse Width VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 SO Pulse Width 10.0 ns 9, 10, 11 tw(H)(3) Pulse Width VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 IR Pulse Width 7.5 ns 9 5 IR Pulse Width 8.5 ns 10, 11 5 MILITARY DATA SHEET MN54F413-X REV 1A0 Electrical Characteristics AC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS FIGS. SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS tw(H)(4) Pulse Width VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 2, 4 OR Pulse Width 5.0 ns 9, 10, 11 tw(L)(4) Pulse Width VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 MR Pulse Width 10.0 ns 9, 10, 11 trec Recovery Time VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 MR to SI 32.0 ns 9 5 MR to SI 35.0 ns 10, 11 tpT tbu Fmax Fmax Data Through-put Time Bubble-Up Time Shift in Rate Shift Out Rate Note 1: Note 2: Note 3: Note 4: Note 5: VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 2, 4 0.9 us 9 2, 4 1.0 us 10, 11 2, 4 BubbleUp Time 0.9 us 9 2, 4 BubbleUp Time 1.0 us 10, 11 5 Shift 10 In Rate MHz 9 5 Shift 8 In Rate MHz 10, 11 5 Shift Out Rate 10 MHz 9 5 Shift Out Rate 8 MHz 10, 11 Screen tested 100% on each device at -55 C, +25 C & +125 C temperature, Subgroups A1, 2, 3, 7 & 8. Screen tested 100% on each device at +25 C temperature only, Subgroup A9. Sample tested (Method 5005, Table 1) on each MFG. lot at +25 C, +125 C & -55 C temp., Subgroups A1, 2, 3, 7 & 8. Sample Tested (Method 5005, Table 1) on each MFG. lot at +25 C Subgroup A9, & periodically at +125 C & -55 C temp., Subgroups 10 & 11. Not tested at +25 C, +125 C & -55 C temperature. (DESIGN CHARACTERIZATION DATA). 6