101.2mm (4.0INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SA40-19SEKWA Super Bright Orange Features Description z Large size. The Super Bright Orange device is made with AlGaInP (on z 4.0 inch digit height. GaAs substrate) light emitting diode chip. z Low current operation. z Excellent character appearance. z High light output. z Easy mounting on P.C. boards or sockets. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAK2756 REV NO: V.4A DATE: APR/20/2013 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1301003063 Selection Guide Part No. Dice SA40-19SEKWA Iv (ucd) [1] @ 10mA Lens Type Super Bright Orange (AlGaInP) Description Min. Typ. 255000 500000 *88000 *180000 White Diffused Common Anode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Orange D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 610 nm IF=20mA Super Bright Orange 601 nm IF=20mA Spectral Line Half-width Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 15 pF VF=0V;f=1MHz VF [2] Forward Voltage (DP) Super Bright Orange 8.4 (4.2) 10.0 (5.0) V IF=20mA IR Reverse Current (Per chip) Super Bright Orange 20 (10) uA VR=5V (VR=5V) Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Super Bright Orange Units Power dissipation (DP) 600 (150) mW DC Forward Current (DP) 60 (30) mA Peak Forward Current [1] (DP) 390 (195) mA 5 (5) V Reverse Voltage (Per chip) Operating / Storage Temperature Lead Solder Temperature[2] -40C To +85C 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAK2756 REV NO: V.4A DATE: APR/20/2013 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1301003063 Super Bright Orange SA40-19SEKWA SPEC NO: DSAK2756 REV NO: V.4A DATE: APR/20/2013 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1301003063 SPEC NO: DSAK2756 REV NO: V.4A DATE: APR/20/2013 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1301003063 PACKING & LABEL SPECIFICATIONS SA40-19SEKWA SPEC NO: DSAK2756 REV NO: V.4A DATE: APR/20/2013 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1301003063 SPEC NO: DSAK2756 REV NO: V.4A DATE: APR/20/2013 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1301003063 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAK2756 REV NO: V.4A DATE: APR/20/2013 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1301003063