PRODUCT SELECTOR GUIDE New Cooling Solutions for Ball Grid Arrays The Industry's Most Comprehensive Selection of BGA Heat Sinks Aavid Thermalloy offers the broadest line of innovative BGA heat sinks - including standard, off-the-shelf solutions to support all of your most demanding applications. Cost effective and highly functional, our BGA heat sinks range in size from 10mm x 10mm to 45mm x 45mm, and accommodate heights from 6mm to 35mm. All come in the flat base and light weight you require, and deliver proven, long-term reliability. SOLDER ANCHOR ATTACHMENT METHOD FEATURES AND BENEFITS ! W NE * New unique wire clip design allows for complete reworkability after assembly without damage to the BGA package or PC Board * Configurations are available for a wide range of BGA package sizes * Minimal PC Board real estate is required for mounting * Solder Anchors provide the most rugged mounting in the industry * Each Heat Sink utilizes a phase change pad as the interface for optimal thermal performance. Drawing represents those heat sinks requiring 2 solder anchors H W Solder Anchor Sold Separately Part # D057 Solder anchors must be soldered to PCB prior to attaching the heat sink clip Consult P.C. Board Hole Pattern for number required Part Number Width Length Height * n 374024B60023 374124B60023 374224B60023 374324B60023 374424B60023 374524B60023 10-5634-01** 10-THMA-01** 374624B60024 374724B60024 374824B60024 10-BRD2-01** 10-BRD1-01** 10-BRD1-03** 10-BRD1-04** 10-BRD1-05** 10-BRD1-07** 374924B60024 375024B60024 375124B60024 10-CLS1-01** 10-CLS2-01** 23.0 23.0 23.0 27.0 27.0 27.0 31.0 31.0 35.0 35.0 35.0 35.7 37.5 37.5 37.5 37.5 37.5 40.0 40.0 23.0 23.0 23.0 27.0 27.0 27.0 34.9 34.9 35.0 35.0 35.0 37.3 37.5 37.5 37.5 37.5 37.5 40.0 40.0 10.0 18.0 25.0 10.0 18.0 25.0 23.0 35.0 10.0 18.0 25.0 23.0 23.0 23.0 23.0 23.0 23.0 10.0 18.0 40.0 42.3 42.3 40.0 42.3 42.3 25.0 23.0 35.0 L * f *Finish 40.0 11.69 23.4 7.39 19.7 6.37 30.6 9.35 20.3 6.46 16.5 5.47 11.5 4.20 10.7 3.95 23.4 7.55 15.3 5.15 12.0 4.27 11.5 4.20 10.1 3.83 10.1 3.83 10.1 3.83 10.1 3.83 10.1 3.83 20.3 6.46 12.2 4.34 10.3 3.83 8.8 3.51 8.3 3.44 B B B B B B B B B B B N B B B N N B B B B B A A A A A A I I B B B B B G B G B B B B H H Drawing represents heat sink part numbers 10-BRD1-03 and 10-BRD1-05 that require 4 solder anchors H W L * See bottom of page 4 for information on how to use this table Refer to page 4 for PCB hole patterns ** Heat Sinks for Flip Chip includes foam pad around perimeter. This stabilizes the part so heat sink doesn't move. ITEMS SHOWN IN RED ARE AVAILABLE FROM AAVID THERMALLOY'S AUTHORIZED DISTRIBUTORS 1 FOR ADDITIONAL TECHNICAL INFORMATION VISIT OUR WEB SITE AT WWW.AAVIDTHERMALLOY.COM/BGA Copyright (c) Aavid Thermalloy, LLC. April 2002 Corporate Office: Concord, NH * USA Tel: (603)224-9988 TAPE ATTACHMENT METHOD FEATURES AND BENEFITS * Configurations are available for a wide range of BGA package sizes * Tape mounted versions eliminate the need for mounting holes in the PC Board * These Heat Sinks can be used with either plastic or metal/ceramic BGA Packages H L * These Heat Sinks are compatible with Ther-a-grip tapes W Part Number 375324B00035 375224B00032 375424B00034 374024B00032 374024B00035 374124B00032 374124B00035 374224B00032 374224B00035 335224B00032 335224B00034 335324B00032 374324B00032 374324B00035 374424B00032 374424B00035 374524B00032 374524B00035 373024B00032 373024B00034 373224M00032 2327B-CP50 2327B-TACH 335724B00032 335824B00032 Width Length Height * n 10.2 10.2 15.2 23.0 23.0 23.0 23.0 23.0 23.0 25.0 25.0 26.9 27.0 27.0 27.0 27.0 27.0 27.0 27.9 27.9 28.0 27.9 27.9 30.1 30.0 10.2 11.1 15.2 23.0 23.0 23.0 23.0 23.0 23.0 25.0 25.0 26.9 27.0 27.0 27.0 27.0 27.0 27.0 27.9 27.9 28.0 28.1 28.1 30.1 30.0 10.2 10.2 6.4 10.0 10.0 18.0 18.0 25.0 25.0 9.9 9.9 11.4 10.0 10.0 18.0 18.0 25.0 25.0 8.9 8.9 6.0 15.2 15.2 6.6 9.4 71.4 71.4 62.5 40.0 40.0 23.4 23.4 19.7 19.7 34.0 34.0 27.7 30.6 30.6 20.3 20.3 16.5 16.5 33.3 33.3 44.1 23.4 23.4 35.7 29.4 *f Surface 21.20 21.20 17.60 11.69 11.69 7.39 7.39 6.37 6.37 10.39 10.39 8.71 9.35 9.35 6.46 6.46 5.47 5.47 10.00 10.00 13.13 7.43 7.43 10.84 9.11 Plastic Metal Plastic Metal Plastic Metal Plastic Metal Plastic Metal Plastic Metal Metal Plastic Metal Plastic Metal Plastic Metal Plastic Metal Plastic Metal Metal Metal Part Number B B B B B B B B B B B B B B B B B B B B M B B B B 335824B00034 2338B-TACH 371824B00032 371824B00034 374624B00032 374624B00035 374724B00032 374724B00035 374824B00032 374824B00035 372024B00032 372024B00034 373324M00032 374924B00032 374924B00035 364424B00032 364424B00034 375024B00032 375024B00035 375124B00032 375124B00035 2321B-TACH 2332B-TACH 2342B-TACH Width Length Height 30.0 33.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 37.4 40.0 40.0 40.1 40.1 40.0 40.0 40.0 40.0 43.2 43.2 45.7 30.0 31.4 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 37.4 40.0 40.0 40.0 40.0 40.0 40.0 40.0 40.0 41.3 41.3 44.6 * n * f 9.4 12.5 7.0 7.0 10.0 10.0 18.0 18.0 25.0 25.0 27.9 27.9 6.0 10.0 10.0 11.4 11.4 18.0 18.0 25.0 25.0 8.9 29.4 23.1 31.9 31.9 23.4 23.4 15.3 15.3 12.0 12.0 11.9 11.9 32.6 20.3 20.3 18.4 18.4 12.2 12.2 10.3 10.3 22.1 16.5 7.0 12.9 23.1 9.11 7.23 9.67 9.67 7.55 7.55 5.15 5.15 4.27 4.27 4.28 4.28 9.91 6.46 6.46 6.02 6.02 4.34 4.34 3.83 3.83 6.93 4.53 7.26 * See bottom of page 4 for information on how to use this table ITEMS SHOWN IN RED ARE AVAILABLE FROM AAVID THERMALLOY'S AUTHORIZED DISTRIBUTORS 2 FOR ADDITIONAL TECHNICAL INFORMATION VISIT OUR WEB SITE AT WWW.AAVIDTHERMALLOY.COM/BGA Copyright (c) Aavid Thermalloy, LLC. April 2002 Corporate Office: Concord, NH * USA Tel: (603)224-9988 Surface *Finish Plastic Metal Metal Plastic Metal Plastic Metal Plastic Metal Plastic Metal Plastic Metal Metal Plastic Metal Plastic Metal Plastic Metal Plastic Metal B B B B B B B B B B B B M B B B B B B B B B Metal Metal B B PUSH PIN ATTACHMENT METHOD FEATURES AND BENEFITS * Configurations are available for a wide range of BGA Package sizes * All Heat Sinks utilize industry standard hole patterns * Plastic push pins are standard. Consult Aavid Thermalloy for versions available with brass push pins for more rugged applications Part Number Width Length Height * n 10-6326-27 10-6326-28 10-6327-01 10-TNT2-01 28.0 28.0 28.5 36.1 10-5597-02 37.4 10-5597-22 37.4 10-5597-33 37.4 10-5607-04 37.4 10-5607-05 37.4 372924M02000 37.4 10-L4LB-03 41.4 10-L4LB-05 41.4 10-L4LB-11 41.4 28.0 28.0 28.5 48.0 37.4 37.4 37.4 37.4 37.4 37.4 45.2 45.2 45.2 6.0 6.0 10.0 11.6 6.0 6.0 6.0 10.0 10.0 6.0 11.7 11.7 11.7 * f * Each Heat Sink utilizes a Phase Change Pad as the interface for Optimal Thermal Performance *Finish *Fig. 44.1 13.13 44.1 13.13 30.6 9.26 18.8 6.13 33.3 9.91 33.3 9.91 33.3 9.91 22.1 6.99 22.1 6.99 32.6 9.91 16.7 5.60 16.7 5.60 14.2 4.91 B B B B M M M B B M B B B C C C F D D D D D D E E E * Minimal diameter holes are necessary for mounting to PC Board H W * See bottom of page 4 for information on how to use this table Refer to page 4 for PCB hole Patterns CLIP ATTACHMENT METHOD L FEATURES AND BENEFITS * A unique clip eliminates the need for mounting holes in the PC Board * Each Heat Sink utilizes a Phase Change Pad as the interface for optimal thermal performance * The clips unique design eliminates the need for thermal tape attachment * The Clips are available in industry standard sizes to fit a wide variety of BGA package sizes H L Part Number Width Length Height * n * f 2317B-EP11-BGS1 2518B-EP11-BGS2 2519B-EP11-BGS5 2522B-EP04-BGS5 2520B-EP04-BGS5 26.1 30.5 34.5 38.1 38.1 20.5 28.1 31.4 38.0 38.0 15.2 15.6 15.6 10.2 15.6 32.6 9.94 22.7 7.05 19.7 6.30 22.1 6.94 15.6 5.17 *Finish B B B B B W * See bottom of page 4 for information on how to use this table ITEMS SHOWN IN RED ARE AVAILABLE FROM AAVID THERMALLOY'S AUTHORIZED DISTRIBUTORS 3 FOR ADDITIONAL TECHNICAL INFORMATION VISIT OUR WEB SITE AT WWW.AAVIDTHERMALLOY.COM/BGA Copyright (c) Aavid Thermalloy, LLC. April 2002 Corporate Office: Concord, NH * USA Tel: (603)224-9988 PCB HOLE PATTERNS FIGURE B FIGURE A 48.26 (1.900) 35.56 (1.400) 0.97 0.03 (O 0.038 0.001) PLATED THROUGH HOLES 4 X 26.67 (1.050) 17.78 (0.700) 0.97 0.03 (O 0.038 0.001) 53.34 (2.100) PLATED THROUGH HOLES 4 X 66.04 (2.600) 33.02 (1.300) 24.13 (.950) 5.08 (.200) 2X FIGURE C 5.08 (0.200)2x FIGURE D O 3.10 0.03 (O 0.122 0.001) THROUGH HOLES (UNPLATED) 2X 46.6 (1.83 REF.) 59.0 (2.32 REF.) O 3.10 0.03 (O 0.122 0.001) 33.38 (1.314) 41.74 (1.643) THROUGH HOLES (UNPLATED) 2X 16.69 (0.657) 16.46 (0.640) 20.87 (0.822) 32.53 (1.281) FIGURE E 20.87 (0.822) 41.74 (1.643) O 3.10 0.03 (O 0.122 0.001) FIGURE F O 3.10 0.03 (O 0.122 0.001) THROUGH HOLES (UNPLATED) 2X THROUGH HOLES (UNPLATED) 2X 41.50 (1.634) 20.02 (0.788) 20.75 (0.817) 25.40 (1.000) 10.01 (0.394) 41.70 (1.642) 50.80 (2.000) FIGURE G 0.97 0.03 (O 0.038 0.001) 20.85 (.821) FIGURE H 55.88 (2.200) PLATED THROUGH HOLES 2X 0.97 0.03 (O0.038 0.001) 48.26 (1.900) 2X 24.13 (0.950) 33.02 (1.30) PLATEDTHROUGH HOLES 4X 33.02 (1.300) 5.08 (0.200) 4X 27.94 (1.100) 66.04 (2.600) 2X FIGURE I 5.08 (.200 2X) TABLE GUIDE 45.72 (1.800) O0.97 0.03 (O0.038 0.001) PLATED THROUGH HOLES 4X 66.04 (2.600) 29.21 (1.150) 58.42 (2.300) Dimensions are in mm n = Natural convection thermal resistance based on a 75C heat sink temperature rise f = Forced convection thermal resistance based on an entering 1.0 m/s (200 lfm) airflow 22.86 ( 0.900) 4 5.08 (.200)2X Finish: B = Black Anodize, M = Green Anodize, N = Clear Anodize FOR ADDITIONAL TECHNICAL INFORMATION VISIT OUR WEB SITE AT WWW.AAVIDTHERMALLOY.COM/BGA Copyright (c) Aavid Thermalloy, LLC. April 2002 Corporate Office: Concord, NH * USA Tel: (603)224-9988 THERMAL MANAGEMENT DESIGNER TOOL Log on to our web site www.aavidthermalloy.com for design assistance. Click on the BGA product-offering icon and let us help you select the Heat Sink best suited for your application. This no nonsense designer's tool is only available from Aavid Thermalloy. SAMPLE KITS Contact your local Aavid Thermalloy Sales Representative for a designers sample kit featuring our BGA Heat Sinks. Simply log on to www.aavidthermalloy.com/sales CORPORATE OFFICE - AAVID THERMALLOY: 80 Commercial Street Concord, NH 03301 TEL: (603) 224-9988 FAX: (603) 223-1790 This data sheet represents only a few of a broad range of products we make to cool electronics. Our representatives can help you configure a complete cooling solution for your individual applications. Aavid Thermalloy along with Fluent Inc.'s Icepak thermal design software and Applied Thermal Technologies, Inc. thermal design and validation services make up The Total Integrated Solution for Cooling ElectronicsTM. FOR MORE INFORMATION ON HOW TO PUT OUR STRENGTHS TO WORK FOR YOU, VISIT OUR WEB SITES AT: Aavid Thermalloy: www.aavidthermalloy.com Tel: (603) 224-9988 Fluent Inc.: www.icepak.com Tel: (603) 643-2600 Applied Thermal Technologies, Inc.: www.thermalcooling.com Tel: (408) 522-8730 PLEASE NOTE: Our customers are reminded that they bear the responsibility for testing Aavid Thermalloy's products for proposed use. Any information furnished by Aavid Thermalloy is believed to be accurate and reliable, but our customers must bear all responsibility for use and applications of Aavid Thermalloy products. AAVID THERMALLOY MAKES NO WARRANTIES EXPRESSED OR IMPLIED, AS TO THE FITNESS, MERCHANTABILITY, OR SUITABILITY OF ANY AAVID PRODUCTS FOR ANY SPECIFIC OR GENERAL USES. AAVID THERMALLOY SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. All Aavid Thermalloy products are sold pursuant to the Aavid Thermalloy Domestic Terms and Conditions of Sale in effect from time to time, a copy of which shall be furnished upon request (8911A). Copyright (c) Aavid Thermalloy, LLC. April 2002. All icons, drawings, illustrations, and trademarks are the property of Aavid Thermalloy, LLC. and may not be reproduced without express written permission.