100 x .100 Latch/Ejector Header 3 Wall, Straight & Right Angle, High Temp Option . e Military (with 3Ms 3518 polarizing key ) and p center bump polarization Low profile * Optional ejector latches Mounting holes for securing header to board Three wall shroud provides design flexibility Solder tail and wrap tail options * Optional polarizing posts available Choice of rolled pin and snap-in latches High temperature option TS-0771-01 Sheet 1 of 4 83 Physical Insulation Material: Glass Filled Polyester (PBT) Glass Filled Polyester (PCT High Temp Option) Flammability: UL 94V-0 @ Color: Gray Beige (High Temp Option) Marking: 3M Logo, Part Identification Number and Orientation Triangle Contact Material: Copper Alloy Plating Underplate: 100 1 [ 2.54 um ] Nickel QQ-N-290, Class 2 Wiping Area: Gold MIL-G-45204, Type II, Grade C Solder Tails: 200 w [ 5.08 um ] 60/40 Tin Lead MIL-P-81728 Wrap Tails: Gold Flash Electrical Current Rating: 1A Insulation Resistance: >1 x 10? Q at 500 Vdc Withstanding Voltage: 1000 Vrms at Sea Level Environmental Temperature Rating: 55C to +105C UL File No.: E68080 3M Electronic Products Division For technical, sales or ordering information call http://www.3M.com/interconnects/ ?7 800-225-5373 D 19F MH 9035312 CO0442e3 648100 x .100 Latch/Ejector Header 3 Wall, Straight & Right Angle, High Temp Option -XOXX -X2XX -X3XX -X4XX Header with No -X5XX +~X6XX Header with Ejector/Latch Header with Header with Ejector only : Short Ejector/Latch Long Ejector/Latch for 3M Sockets without for 3M Sockets with AL Strain Relief Strain Relief .08 [2.0] _T SF r xX a +.010 r OY 114.55] .97 Ret .07 Ref [24.6] 2] .37 Ref | __.46 Ref 42 Ref 9.4] [11.7] [10.7] Note: This Ejector is a Nickel Plated Zinc Alloy Casting. .025 + .002 Sq Typ "1" [0.64 ] 2X @.100 [2.54] 15 (See Note 2) aE 24 [3.8] D , 28 M [6.1] 020 [7.1] 4 [0.51] A A A A A 4 bo Lt "fe i to SFT el 30 Zo | a ooo Doda C) 30 L . (76) Rp a oo 8 pa " __ 1 ZL I T I Yn Ue ;100 Ref 100 Ref [2.54] L. 95 (2.54] 6 4 L_ E+.010 | 49 [6.4] [3.0] Position 1 | B ~ Notch A ~ ~ F Typ Position 1 (See Table 1 & Note) Orientation Notch B = Triangle (Straight) (See Table 1) | Notch C .025 + .002 Sq Typ _./ .21 (See Table 1 & Note 1) [0.64] [5.3] T : .100 Ref i | (2.54) HE | I ! F Typ 24 | Vv : [6.1] 68 + 117.3) L 8 _ JO 2 35 NN Gyr - 30 1 a) |Oe WIG i a 4 art orem} TY TT ovo | | | | mw m4 i it Ir i E#.010 (0.51) vy Yo bY Y 197 " .049 Ref LL. B [1.24] ~A c [5.00] 20 2X @ .100 _ [5.1] . [2.54] (See Note 2) A (Right Angle) TS-0771-01 Sheet 2 of 4 3M Electronic Products Division For technical, sales or ordering information call 228 800-225-5373 http://www.3M.com/interconnects/ 19F @@ 9035312 O0044e4 784 D100 x .100 Latch/Ejector Header 3 Wall, Straight & Right Angle, High Temp Option Table 1 Pin 3M Part Dimensions Polarization ; Notches Quantity Number A B Cc D Provided 10 3793 1.26 [32.1] 1.105 [28.07] 865 [21.97] -71 [18.0] BC 14 3314 1.46 [37.2] 1.305 [33.15] 1.065 [27.05] 91 [23.1] BC 16 3408 1.56 [39.7] 1.405 [35.69] 1.165 [29.59] 1.01 [25.6] ABC 20 3428 1.76 [44.8] 1.605 [40.77] 1,365 [34.67] 1.21 [30.7] ABC 26 3429 2.06 [52.4] 1.905 [48.39] 1,665 [42,29] 1.51 [38.3] ABC 34 3431 2.46 [62.6] 2.305 [58.55] 2.065 [52.45] 1.91 [48.5] ABC 40 3432 2.76 [70.2] 2.605 [66.17] 2.365 [60.07] 2.21 [56.1] ABC 50 3433 3.26 [82.9] 3.105 [78.87] 2.865 [72.77] 2.71 [68.8] ABC 60 3372 3.76 [95.6] 3.605 [91.57] 3.365 [85.47] 3.21 [81.5} ABC 64 3764 3.96 [100.7] 3.805 [96.65] 3.565 [90.55] 3.41 [86.6] ABC Table 2 3M Part Pin Cross Section Number Contact Tail Dimension E Dimension G Suffix Dimension F Diagonals Corner Radii -AXX2 soe sr 2 0.0245 +.0005 | 0.028+.001 | 0.0075 Ref 035 + 003 -2XX2 Thick PC Board [2.84] [0.622] (0.71) [0.191] [0.89] (See Note 3) Solder Tail for -1X03 094 [2.39] to ISS 0.0245 + .0005 0.028 + .001 0.0075 Ref .035 + .003 -2X03 125 [3.18] [3.94] [0.622] [0.71] [0.191] [0.89] Thick PC Board -3X05 Wire Wrap Tail for up to 61 Ref 0.0250 + .002 0.035 + .003 0.003 Max 045 + .003 -4X05 3 Levels of Wire Wrap * [15.5] [0.635] [0.90] [0.08] [1.14] 106 116 @106 or @.116 O61 951 [2.69] [2.95] yp AT (See Note 2) 300 (See Note 2) [10.4] [7.62] Max to Edge of PCB GDia Side to Side Stackability pia _ for Daisy Chain Th ' y _ g : 4 __ \ ny | f Zz =o = = pe = wa aa ee Tp ey | 029 1 Position 1 1 Position 1 f vt (rs __| [0.74] | 100 + .003 las | .100 + .003 cc / [2.54] | [2.54] | | -100 + .003 | .232 352 [2.54] ! [5.89} [8.94} ; -100 + .003 [2.54] B Le c i Recommended Mounting Hole Pattern Recommended Mounting Hole Pattern (Straight) . (Right Angle) Inch [mm] Tolerance Unless Noted 0 .00 =| .000 Notes: 1. Notches A & C will accomodate 3M Poiarizing Keys (3M Part #3518 or M3518). Inch | =.1 | 2.01 |= .005 2. Accepts Rear and Front mounting hardware: { ] Dimensions for Rear Entry: #4-24 thread cutting screw, 3M Part #3341-5, .116 [2.95] dia mounting hole Reference only Front Entry: (Prior to installation of latch on Straight Versions) #2-56 bolt and nut, 3M Part #3341-6, -106 [2.69] dia mounting hole TS-0771-01 3. The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 + .002. Sheet 3 of 4 15F @@ 903531e OOO44eS 410 For technical, sales or ordering information call 800-225-5373 3M Electronic Products Division D http://www.3M.com/interconnects/ 229100 x .100 Latch/Ejector Header 3 Wall, Straight & Right Angle, High Temp Option Ordering Information 30 Microinches Gold Plated Product Solder Tail 2 = 3 Wall, Straight Solder Tail 3 = 3 Wall, Right Angle Wrap Post {not available on High Temp version) 4 = 3 Wall, Straight Wrap Post 15 Microinches Gold Plated Product (3M Part # 3505-31) * Roll pin Latch/Ejector available only on standard version. XXXXX-XXXX * Blank = Standard . N = High Temperature Latch/Ejector System Tail 0 = No Latch/Ejector 02 =Solder Tail for .062 [1.57] Thick Board 2 = Short, Roll Pin Latch/Ejectors K2=Kinked Solder Tails for .062 [1.57] 3M Part Number (3M Part # 3505-2)" Thick Board (See Table 1) 3 = Long, Roll Pin Latch/Ejectors 03 =Solder Tails for .094 to .125 [2.39 to 3.18] (3M Part # 3505-3)* Thick Board 4 = Roll Pin Ejectors 05 =Wrap Posts for up to 3 Levels of Wire Wrap (3M Part # 3505-4)* (not available on High Temp version) 5 = Short, Snap-In Latch/Ejectors, (3M Part # 3505-30) Shroud and Pin Contiguration 6 = Long, Snap-In Latch/Ejectors 1 = 3 Wall, Right Angle (3M Part # 3505-31) XXXXX-XXXXUG Plating Suffix UG = 15 microinch Gold Blank = Standard al Ne High 2 ar 02 =Solder Tail for .062 [1.57] Thick Board = High Temperature K2=Kinked Solder Tails for .062 [1.57] Thick Board 03 =Solder Tails for .094 to .125 [2.39 to 3.18] 3M Part Number . Thick Board (See Table 1) Shroud and Pin Configuration Latch/Ejector System = 3 Wall, Right Angle 0 = No LatetvEjector Solder Tail 5 = Short, Snap In Latch/Ejectors 2 = 3 Wall, Straight Solder Tail (3M Part # 3505-30) 6 = Long, Snap In Latch/Ejectors TS-0771-01 Sheet 4 of 4 3M Electronic Products Division ) 49F HM 9035312 OO0O44eb SS? For technical, sales or ordering information call 800-225-5373 http:/Avww.3M.com/interconnects/ 230