1,050 mm type head production sample
(L: 1,225 × W: 210 × H: 110 mm L: 48.228 × W: 8.268 × H: 4.331 in)
Excl. wiring connections and protruding sections
Aicure UD90
UV irradiation intensity of 10,000 mW/cm2
class at irradiation distance 30 mm 1.181 in.
High power output LED Line Type
UV curing system
Power supply and controller unit
L: 500 × W: 300 × H: 710 mm
L: 19.685 × W: 11.811 × H: 27.953 in
Excl. wiring connections and protruding sections
Specifications
L: 500 × W: 300 × H: 710 mm
L: 19.685 × W: 11.811 × H: 27.953 in
(Depending on the irradiation specification, more than
two units will be required.)
30 mm 1.181 in, 80 mm 3 .15 0 in (types with standard
mounts for printing machines)
*For different specifications, please consult us.
Min. 70 to 1,800 mm 2.756 to 70.866 in
(* For more detailed specifications, please consult us.)
9,600 mW/cm2 can be supplied (at surface 30 mm
1.181 in below the irradiation section )
385 nm, 365 nm
Forced water cooling system (please make your own
arrangements for chillers, etc.)
* Clear water (or tap water) cooling can also be used.
Controller size
Effective irradiation
width
UV irradiation
intensity
Irradiation distance
UV wavelength
(Central wavelength)
Estimated light
source life
UV irradiation unit
cooling system
15, 000 hours approx. (* The value is not a guaranteed
value.)
Please contact:
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Global Sales Department
■Telephone: +81-568-33-7861 ■Facsimile: +81-568-33-8591
panasonic.net/id/pidsx/global
All Rights Reserved © 2016
Specifications are subject to change without notice. Printed in JapanNo.CE-UV-1-7 November, 2016
LED
UV Curing System
UJ30 / UJ35
UV Curing System
LAMP
UP50
LED
UV Curing System
UD40
series
LED
UV Curing System
UD90
series
UV Curing System
LAMP
ANUP7000
series
Energy saving, High brightness,
High accuracy UV irradiation using LED type
Complete range of Lamp type, too.
For resin curing in adhesion, printing, separation, coating, as a UV light source for inspection,
and for other uses, for workpieces and applications, choose from our lineup.
UV Curing System
LAMP
ANUP8000
series
LED Type / Lamp Type
UV Curing System
Aicure SERIES
panasonic.net/id/pidsx/global
2016.11
The energy-efficient and high-precision UV irradiation systems come in the LED and lamp types to
meet diverse requirements for a variety of workpieces.
Lineup
LED Type
Lamp Type
Spot Type with 22,000
mW/cm2
with 6,000
mW/cm2
with 4,600
mW/cm2
Series
UV intensity
Spot Type
Tube Type
UP50
ANUP7000
series
ANUP3000
series
UJ30 / UJ35
UJ35
Line Type
Line Type
with 10,000
mW/cm2
UD90
series
UD40
series
ANUP8000
series
Note: For the tube type, the lamp output is indicated.
Aicure series
3
2
Advantages Disadvantages
Applications
Assembly of
lens modules
Fixing and bonding of
camera modules
Adhesion of
image sensor glass
Optical parts for
printers and copiers
Sealing of adhesive
bonds between
circuit boards and
liquid crystals
Curing of inkSealing of
airtight holes
Drying of ink
used to print part and
lot numbers
Resin coatings for
printed circuit boards
Adhesion of
vehicle coil terminals
Sealing of
LCDs and organic ELs
Reinforcement of UV resin
at flexible board junctions
Adhesion of
voice coils
Temporary adhesion and
permanent curing of touch panels
Reinforcement and waterproofing
of vehicle-use connectors
Adhesion of touch panels
and printed circuit boards
Luminescence testing of
fluorescent substances
Testing for the presence of oil, grease,
and other materials
containing fluorescent substances
Curing and separation
of dicing film and BG film
Adhesion of injection needles
and medical devices
Hard coating for cases and
all kinds of ornaments
Curing of ink used to print
text on electronic components
UV printing
UV ink jet printing
Curing of ink
used to print labels
Manufacture of
hybrid lenses
1.5 kW
(Note)
3 kW
(Note)
6 kW
(Note)
3 kW
(Note)
6 kW
(Note)
1.5 kW
(Note)
3 kW
(Note)
Construction material and
flooring coatings
Bonding and curing applications
UV light sources for testing use
Alignment testing of
transparent fluorescent
substances
Adhesion of
vibrating plates
(cones)
Adhesion of
voice coils
■ Low thermal stress
■ Capable of irradiation
ON / OFF control
■
Low power consumption
■ Stable UV irradiation
■ Long estimated light
source life
■ Small size
■ Does not generate
ozone
■ Exhaust duct not
required
■ Can be used with large
equipment
■ Suitable for UV
irradiation through
polycarbonate
UJ30 / UJ35
405 nm type
■ Requires UV resin that
cures at a single
wavelength 365 nm,
385 nm or 405 nm
405 nm type is
available for
combining with
UJ30 / UJ35 only
■ High thermal stress
■ Short lamp life
■ Exhaust duct required
(tube type)
■ Broad UV wavelength
range (including heat
rays)
■ Compatible with a
variety of UV resins
The energy-efficient and high-precision UV irradiation systems come in the LED and lamp types to
meet diverse requirements for a variety of workpieces.
Lineup
LED Type
Lamp Type
Spot Type with 22,000
mW/cm2
with 6,000
mW/cm2
with 4,600
mW/cm2
Series
UV intensity
Spot Type
Tube Type
UP50
ANUP7000
series
ANUP3000
series
UJ30 / UJ35
UJ35
Line Type
Line Type
with 10,000
mW/cm2
UD90
series
UD40
series
ANUP8000
series
Note: For the tube type, the lamp output is indicated.
Aicure series
3
2
Advantages Disadvantages
Applications
Assembly of
lens modules
Fixing and bonding of
camera modules
Adhesion of
image sensor glass
Optical parts for
printers and copiers
Sealing of adhesive
bonds between
circuit boards and
liquid crystals
Curing of inkSealing of
airtight holes
Drying of ink
used to print part and
lot numbers
Resin coatings for
printed circuit boards
Adhesion of
vehicle coil terminals
Sealing of
LCDs and organic ELs
Reinforcement of UV resin
at flexible board junctions
Adhesion of
voice coils
Temporary adhesion and
permanent curing of touch panels
Reinforcement and waterproofing
of vehicle-use connectors
Adhesion of touch panels
and printed circuit boards
Luminescence testing of
fluorescent substances
Testing for the presence of oil, grease,
and other materials
containing fluorescent substances
Curing and separation
of dicing film and BG film
Adhesion of injection needles
and medical devices
Hard coating for cases and
all kinds of ornaments
Curing of ink used to print
text on electronic components
UV printing
UV ink jet printing
Curing of ink
used to print labels
Manufacture of
hybrid lenses
1.5 kW
(Note)
3 kW
(Note)
6 kW
(Note)
3 kW
(Note)
6 kW
(Note)
1.5 kW
(Note)
3 kW
(Note)
Construction material and
flooring coatings
Bonding and curing applications
UV light sources for testing use
Alignment testing of
transparent fluorescent
substances
Adhesion of
vibrating plates
(cones)
Adhesion of
voice coils
■ Low thermal stress
■ Capable of irradiation
ON / OFF control
■
Low power consumption
■ Stable UV irradiation
■ Long estimated light
source life
■ Small size
■ Does not generate
ozone
■ Exhaust duct not
required
■ Can be used with large
equipment
■ Suitable for UV
irradiation through
polycarbonate
UJ30 / UJ35
405 nm type
■ Requires UV resin that
cures at a single
wavelength 365 nm,
385 nm or 405 nm
405 nm type is
available for
combining with
UJ30 / UJ35 only
■ High thermal stress
■ Short lamp life
■ Exhaust duct required
(tube type)
■ Broad UV wavelength
range (including heat
rays)
■ Compatible with a
variety of UV resins
Irradiation control
Parallel I/O
PLC
Quick setup immediately after
installation
User Friendly
Interface
(0.0 sec. to 999 sec., continuous irradiation: [Con])
To set [Con], press “▼” once again at 0.0 sec. or
press “▲” once again at 999 sec.
5
4
Aicure UJ30/UJ35
Aicure UJ30/UJ35
Featuring Panasonic high-efficiency lens *1
High-output Head equivalent to 20,000 mW/cm2 class *2
High-performance of High-output head brings real benefit!
User-friendliness and Stable Irradiation
Panasonic’s
original
Panasonic’s
original
Panasonic’s
original
Limited to most necessary and
sufficient functions provides highly
reliable UV irradiation.
A variety of functions will provide
more advanced UV irradiation
solution.
The programmable irradiation function helps prevents
curing distortion and enable high-quality precision
bonding at a lower temperature.
Up to 8 different irradiation patterns can be saved.
Easy-to-read display and easy-to-operate panel are as simple to use as a home appliance.
Controller
selection for you
applications
Standard model
UJ30
High performance model
UJ35
UV intensity measurement and automatic
calibration can be done at the actual
production line using the slim UV sensor.
Free downloadable software available from our website for
easy PC operation. Software will allow you to operate the unit
from a PC. Also allows you to save irradiation programs.
Japanese, English, Chinese and Korean languages available.
The LED head incorporates a temperature sensor. The temperature feedback control provides
excellent irradiation stability.
UV irradiation operation can be externally controlled
using the parallel I/O, enabling automatic control
suitable for production lines.
UV irradiation operation can be externally controlled
using the parallel I/O or the RS232C port, enabling
automatic control suitable for production lines.
Different irradiation power and time can be set for each LED head attached to the controller. Both "all" and
"individual" UV irradiation modes are available.
Guaranteed for three years from date of purchase (controller only) For details, please visit our website.
http://industrial.panasonic.com/ac/e/fasys/warranty/index.jsp
User-friendly
Stable irradiation
Four-head
irradiation
Global 3-year
warranty
External control
UV sensor
Programmable
irradiation
Multiple setting
profiles
UJ35 software (Note)
Note: Downloadable from the following URL: http://industrial.panasonic.com/ac/e/fasys/software_info/uv/tol_uj30-uj35.jsp
RS232C (UJ35)
*1 Lens embedded in the head of ANUJ6186, ANUJ6188 or ANUJ6189.
*2 Peak value and representative value at an irradiation distance of 8 mm 0.315 in when ANUJ6186 or ANUJ6423 is used.
Tact time can be
significantly reduced.
If the same UV intensity as
the existing head model is
required, output can be
reduced, which will save
power and extend LED life.
The UV irradiation area can
be significantly expanded.
1
Advantage
2
Advantage
3
Advantage
405 nm type
Extend UV curing to coatings
that were hard to irradiate.
Now, you can even perform
photo-curing of adhesion
through glass or resin.
4
Advantage
The intensity profiles shown are representative values, not guaranteed values. Install the metal attachment (ANUJ6804),
or take other heat radiation measures.
■ UV intensity comparison with existing models
Wavelength 365 nm
Wavelength 385 nm
ANUJ6186
ANUJ6188
Wavelength 365 nm
Wavelength 385 nm
ANUJ6180
ANUJ6184
Wavelength 405 nm
ANUJ6189
Wavelength 405 nm
ANUJ6187
Controller selections for you applications UJ30 / UJ35
High-output head equipped with new high-efficiency lens
Standard type head inherits an existing intensity profile
ANUJ6423
(ø3 mm ø3 in)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
22,000
24,000
-5 -4-3 -2 -101234 5
-0.197 -0 .157 -0 .118 -0.079 -0.039 0.039 0.079 0.118 0.157 0.197
-5 -4-3 -2 -1012 3 4 5
-0.197 -0 .157 -0 .118 -0.079 -0.039 0.039 0.079 0.118 0.157 0.197
UV intensity (mW/cm2)
Irradiation area (mm in)
ANUJ6186 WD=8
ANUJ6186 WD=10
ANUJ6180 WD=10
ANUJ6170 WD=10
* WD: Working Distance
(mm in)
5,000
ANUJ6428
(ø8 mm ø0.315 in)
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
UV intensity (mW/cm2)
Irradiation area (mm in)
ANUJ6186 WD=30
ANUJ6180 WD=30
ANUJ6170 WD=30
* WD: Working Distance
(mm in)
The irradiation power, time, and timing of the LED heads can be
individually controlled. With the lamp type model, one process
requires one irradiation unit. With UJ30 / UJ35, one unit can be
used for up to four processes due to its four individually-
controllable LED heads. It will also show a notice if any of the
LED head reaches time to replace or when there is a temperature
warning on one of the heads.
UJ30 / UJ35 can be easily set up like setting up a
home appliance.
Only three switches required for basic settings.
UV irradiation (time and irradiation timing) of the LED heads
can be controlled by parallel signals from a programmable
controller or other external devices.
A variety of control is possible. For example, UV irradiation
time can be set up in increments of 0.1 seconds by the
controller for each LED head. And an external signals can be
used to indivisually start or stop the UV irradiation of the LED
heads. With UJ35, irradiation control using RS232C (Note 1) is
available.
“UJ35 software (free) (Note 2),” the setup process can be easily
set up using a PC.
Simple interface
Easy-to-read display and easy-to-operate panel
Four individually controllable LED heads
The irradiation power and time can be individually
controlled.
External control
UV irradiation can be controlled by external signal
inputs, enabling automatic control in production lines.
1
2
3
4
5
6
7
CH selection
Intensity setting
Time setting Completed
1Choose the
channel.
2Press "SET" to
start.
3Adjust the UV
irradiation intensity.
4Press "SET" to enter.
5Adjust the irradiation
time.
6Setting completed
(Press "SET" to complete.)
7Press "EMISSION"
to start UV irradiation.
When it's pressed
once again at “Con”,
UV irradiation stops.
[UV irradiation for preset time]
External signal
UV
t sec
UV irradiation starts when an external
signal pulse is applied to external input.
UV irradiation will stop after the preset
time (t sec) has elapsed.
[UV irradiation while external signal is on]
External signal
UV
t sec
UV irradiation continues while the external
signal is turned on (t sec)
UV irradiation will stop when the external
signal is turned off.
1 Choose LED head (CH1 to CH4).
2 Set UV irradiation intensity (%).
3 Set irradiation time.
Process 1 Process 2 Process 3 Process 4
Notes: 1) Use straight RS232C for connection to PC or similar.
Cable side: D-sub connector 9-pin (female pin)
2) Downloadable from our website.
http://industrial.panasonic.com/ac/e/fasys/software_info/uv/tol_uj30-uj35.jsp
Irradiation control
Parallel I/O
PLC
Quick setup immediately after
installation
User Friendly
Interface
(0.0 sec. to 999 sec., continuous irradiation: [Con])
To set [Con], press “▼” once again at 0.0 sec. or
press “▲” once again at 999 sec.
5
4
Aicure UJ30/UJ35
Aicure UJ30/UJ35
Featuring Panasonic high-efficiency lens *1
High-output Head equivalent to 20,000 mW/cm2 class *2
High-performance of High-output head brings real benefit!
User-friendliness and Stable Irradiation
Panasonic’s
original
Panasonic’s
original
Panasonic’s
original
Limited to most necessary and
sufficient functions provides highly
reliable UV irradiation.
A variety of functions will provide
more advanced UV irradiation
solution.
The programmable irradiation function helps prevents
curing distortion and enable high-quality precision
bonding at a lower temperature.
Up to 8 different irradiation patterns can be saved.
Easy-to-read display and easy-to-operate panel are as simple to use as a home appliance.
Controller
selection for you
applications
Standard model
UJ30
High performance model
UJ35
UV intensity measurement and automatic
calibration can be done at the actual
production line using the slim UV sensor.
Free downloadable software available from our website for
easy PC operation. Software will allow you to operate the unit
from a PC. Also allows you to save irradiation programs.
Japanese, English, Chinese and Korean languages available.
The LED head incorporates a temperature sensor. The temperature feedback control provides
excellent irradiation stability.
UV irradiation operation can be externally controlled
using the parallel I/O, enabling automatic control
suitable for production lines.
UV irradiation operation can be externally controlled
using the parallel I/O or the RS232C port, enabling
automatic control suitable for production lines.
Different irradiation power and time can be set for each LED head attached to the controller. Both "all" and
"individual" UV irradiation modes are available.
Guaranteed for three years from date of purchase (controller only) For details, please visit our website.
http://industrial.panasonic.com/ac/e/fasys/warranty/index.jsp
User-friendly
Stable irradiation
Four-head
irradiation
Global 3-year
warranty
External control
UV sensor
Programmable
irradiation
Multiple setting
profiles
UJ35 software (Note)
Note: Downloadable from the following URL: http://industrial.panasonic.com/ac/e/fasys/software_info/uv/tol_uj30-uj35.jsp
RS232C (UJ35)
*1 Lens embedded in the head of ANUJ6186, ANUJ6188 or ANUJ6189.
*2 Peak value and representative value at an irradiation distance of 8 mm 0.315 in when ANUJ6186 or ANUJ6423 is used.
Tact time can be
significantly reduced.
If the same UV intensity as
the existing head model is
required, output can be
reduced, which will save
power and extend LED life.
The UV irradiation area can
be significantly expanded.
1
Advantage
2
Advantage
3
Advantage
405 nm type
Extend UV curing to coatings
that were hard to irradiate.
Now, you can even perform
photo-curing of adhesion
through glass or resin.
4
Advantage
The intensity profiles shown are representative values, not guaranteed values. Install the metal attachment (ANUJ6804),
or take other heat radiation measures.
■ UV intensity comparison with existing models
Wavelength 365 nm
Wavelength 385 nm
ANUJ6186
ANUJ6188
Wavelength 365 nm
Wavelength 385 nm
ANUJ6180
ANUJ6184
Wavelength 405 nm
ANUJ6189
Wavelength 405 nm
ANUJ6187
Controller selections for you applications UJ30 / UJ35
High-output head equipped with new high-efficiency lens
Standard type head inherits an existing intensity profile
ANUJ6423
(ø3 mm ø3 in)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
22,000
24,000
-5 -4-3 -2 -101234 5
-0.197 -0 .157 -0 .118 -0.079 -0.039 0.039 0.079 0.118 0.157 0.197
-5 -4-3 -2 -1012 3 4 5
-0.197 -0 .157 -0 .118 -0.079 -0.039 0.039 0.079 0.118 0.157 0.197
UV intensity (mW/cm2)
Irradiation area (mm in)
ANUJ6186 WD=8
ANUJ6186 WD=10
ANUJ6180 WD=10
ANUJ6170 WD=10
* WD: Working Distance
(mm in)
5,000
ANUJ6428
(ø8 mm ø0.315 in)
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
UV intensity (mW/cm2)
Irradiation area (mm in)
ANUJ6186 WD=30
ANUJ6180 WD=30
ANUJ6170 WD=30
* WD: Working Distance
(mm in)
The irradiation power, time, and timing of the LED heads can be
individually controlled. With the lamp type model, one process
requires one irradiation unit. With UJ30 / UJ35, one unit can be
used for up to four processes due to its four individually-
controllable LED heads. It will also show a notice if any of the
LED head reaches time to replace or when there is a temperature
warning on one of the heads.
UJ30 / UJ35 can be easily set up like setting up a
home appliance.
Only three switches required for basic settings.
UV irradiation (time and irradiation timing) of the LED heads
can be controlled by parallel signals from a programmable
controller or other external devices.
A variety of control is possible. For example, UV irradiation
time can be set up in increments of 0.1 seconds by the
controller for each LED head. And an external signals can be
used to indivisually start or stop the UV irradiation of the LED
heads. With UJ35, irradiation control using RS232C (Note 1) is
available.
“UJ35 software (free) (Note 2),” the setup process can be easily
set up using a PC.
Simple interface
Easy-to-read display and easy-to-operate panel
Four individually controllable LED heads
The irradiation power and time can be individually
controlled.
External control
UV irradiation can be controlled by external signal
inputs, enabling automatic control in production lines.
1
2
3
4
5
6
7
CH selection
Intensity setting
Time setting Completed
1Choose the
channel.
2Press "SET" to
start.
3Adjust the UV
irradiation intensity.
4Press "SET" to enter.
5Adjust the irradiation
time.
6Setting completed
(Press "SET" to complete.)
7Press "EMISSION"
to start UV irradiation.
When it's pressed
once again at “Con”,
UV irradiation stops.
[UV irradiation for preset time]
External signal
UV
t sec
UV irradiation starts when an external
signal pulse is applied to external input.
UV irradiation will stop after the preset
time (t sec) has elapsed.
[UV irradiation while external signal is on]
External signal
UV
t sec
UV irradiation continues while the external
signal is turned on (t sec)
UV irradiation will stop when the external
signal is turned off.
1 Choose LED head (CH1 to CH4).
2 Set UV irradiation intensity (%).
3 Set irradiation time.
Process 1 Process 2 Process 3 Process 4
Notes: 1) Use straight RS232C for connection to PC or similar.
Cable side: D-sub connector 9-pin (female pin)
2) Downloadable from our website.
http://industrial.panasonic.com/ac/e/fasys/software_info/uv/tol_uj30-uj35.jsp
ø5.5 mm ø0.217 in
R33
Safe and reliable
Environmental Consciousness and
Reliable
Guaranteed for three years from the date of
purchase (controller only), providing reliablility even
if the manufacturing line is at remote location.
For details, please visit our website
You can see LED head temperature readings on the display!
Designed to dissipate heat,
estimation of life is easy.
While the display is showing
irradiation conditions, you can
see the temperature of the
LED head simply by pressing
the MODE button. The
controller is designed to
dissipate heat, and it is easy
to estimation of life.
Strict quality control
Stable Irradiation
■
Typical characteristics of the high intensity head when our mounting bracket is used
7
6
Aicure UJ30/UJ35
Aicure UJ30/UJ35
http://industrial.panasonic.com/ac/e/fasys/warranty/index.jsp
http://industrial.panasonic.com/ac/e/salesnetwork/index.jsp
■ LED emission spectrum
Typical characteristics
100
80
60
40
20
0
350 360 370 380
Wavelength (nm)
Relative intensity (%)
390 400 410 420 430 440 450
365 nm wavelength 385 nm wavelength 405 nm wavelength
0 %
10 %
20 %
30 %
40 %
50 %
60 %
70 %
80 %
90 %
100 %
110 %
05,000 10,000 15,000 20,000 25,000 30,000 35,000
Irradiation time
(H)
Relative ratio (%)
50 °C 122 °F
■
Estimated life according to LED temperature (The value is not a guaranteed value.)
60 °C 140 °F 70 °C 158 °F
Panasonic's
original
The UV irradiation intensity of the LED heads can be relative
measured at the actual position by using the optional slim UV
sensor
(Note)
. It can also automatically adjust the UV intensity to
the preset level. Since the sensor only has 5 mm 0.197 in
thickness, which is similar to the workpiece, the intensity
measurement is possible without removing the system from the
production line, facilitating high-accuracy setting and in-line
condition optimization. The UV intensity can be checked and
adjusted at real time, enhancing the bonding and fixing reliability.
Generally, when the LED temperature rises, the UV irradiation
output decreases. To prevent the temperature to rise, the LED
heads are built with metal materials with fins to increase heat
dissipation. The LED heads are also equipped with a built-in
temperature sensor to feedback the temperature to the controller.
The controller will calculate the loss of power due to temperature
increase, enabling stable UV irradiation at an accuracy within
±3 % when the intensity is set to 80 %. This high performance is
ideal for high-quality and precision bonding applications.
The LED heads irradiate 365 nm,
385 nm wavelength UV rays or
405 nm short wavelength, which
do not contain infrared rays (heat)
unlike the light from the lamp type
system, preventing the
temperature rise of workpieces.
This is ideal for applications that
require high precision bonding
with minimum thermal distortion,
such as the assembly of thin
plastic lenses.
The irradiation can be programmed to controls the irradiation
power and time depending on the resin and curing appication,
supporting high-quality and high-precision bonding with
minimum cure shrinkage. In addition to the simple irradiation
mode which irradiation is continuously performed at a constant
intensity, up to 10 steps 7 different irradiation patterns
(7 product types) can be programmed for each of the four LED
head.
Prevention of resin curing defects and bonding faillures
Temperature feedback control
±3 % or better UV irradiation accuracy (for wavelength 365 nm / 385 nm type with the intensity set to 80 %)
Significantly higher reliability for bonding and fixing
Programmable irradiation function (for UJ35)
This function prevents curing distortion and enables
high-quality precision bonding.
Infrared rays-free UV irradiation
High-accuracy bonding without thermal distortion
5 mm
0.197 in
Panasonic's
original
100
90
80
70
60
0 5 10 15 20 25 30 35 40
Continuous lighting time (min)
UV intensity (%) (Note 1)
: When set to 100 %
: When set to 90 %
: When set to 80 %
Note: "100" indicates the 100 % intensity setting.
Slim UV sensor (for UJ35)
The UV sensor for measuring irradiation intensity
enables auto-turning in high-accuracy.
Note: UV intensity can be measured as a relative value.
Sensitivity adjustment of the UV sensor is carried out at 365 nm, if you use
the UV sensor at 385 nm or 405 nm, the displayed value may be greater than
the actual UV intensity.
For more information, please consult us.
[Conditions]
Workpieces: Optical pickup lenses
UV intensity: 250 mW/cm2
Irradiation distance: 20 mm 0.787 in
Typical characteristics
60
40
20
0
0 10 20 30 40
Lamp type
without filter
Lamp type
with filter
LED type
53 deg.
40 deg.
3.4 deg.
Irradiation time (sec.)
Program mode
Program 1 Program 7
STEP=1
STEP=10
Interval (closed)
Constant intensity
…
STEP=1
STEP=3
→ Time
Programmable irradiationSimple irradiation
Step-up irradiation Irradiation at
specifiedintervals
Temperature rise (deg.)
→ UV intensity
One of the biggest benefits of using the LED type is that the light
source life is much longer than lamps used in lamp type. The life
of the lamp is 3,000 hours approx., but the LED has 20,000 hours
approx. Further more, unlike the lamp type, which needs to be
kept turned on through out the operation, the LED type can turn
on UV irradiation only when it is needed. When the irradiation
ON/OFF time ratio is 1:4 (process cycle time = 5, irradiation time
= 1), the LED type operation life is equivalent to 100,000 hours
approx. compared to lamp types, leading to significant reductions
in running costs and hours for maintenance.
Reliable operation anywhere in the world
Covered by the global
3-year warranty
Flexible cable for LED head will enable installation to
even moving sections.
Standard Flexible head cables
Flexible cable has been adopted as the standard LED head
connection cable considering that the LED heads will be
mounted on to a moving section. Unlike silica fiber cables
where there is a risk of damaging the cable by moving the cable
too much, these flexible cables can be easily handled without
risk of damageing. (withstanding 10 million bends to a radius of
33 mm 1.299 in based on our evaluation). The cables can be
extended to a maximum of 10 m 32.808 ft using extension
cables, which also have the same flexiblility.
Frequent part replacement is reduced by LED type.
Long-lasting cost effective LED type
Lead and Mercury free
Eco product compliant with CE, RoHS, etc.
Ideal for high-precision process. Helps reducing costs.
Cooling fan-less structure
Without the need for a cooling fan, it is ideal for vibration-
sensitive or dust-sensitive high precision process. Also, this
design reduces need for exhaust ventilation ducting and related
installation work as well as the running costs for exhaust
ventilation and air conditioning.
6.6-fold
33-fold
Lamp type
continuous
lighting
3,000 hours
approx.
LED type
continuous
lighting
20,000 hours
approx.
LED type
ON/OFF control
100,000 hours
approx.
OFF
OFF
ON
ON
ON
ON
ON
ON
OFF
OFF
Unlike lamps LED heads do not contain mercury. UJ30 and
UJ35 conform to CE Marking, RoHS Directive, and
Management Methods for Controlling Pollution by Electronic
Information Products (China RoHS), ensuring environmentally
safe use. (Please follow the proper industrial waste disposal
procedures.)
(The minimum allowable bend radius for 5 m 16.404 ft or longer cable
diameter ø7.6 mm ø0.299 in is R45.6 mm R1.795 in.)
Available for worldwide use
We have local sales companies to support the expansion of
customers’ global operations. Please visit our website to see
our worldwide sales network.
Panasonic's
original
Panasonic's
original
ø5.5 mm ø0.217 in
R33
Safe and reliable
Environmental Consciousness and
Reliable
Guaranteed for three years from the date of
purchase (controller only), providing reliablility even
if the manufacturing line is at remote location.
For details, please visit our website
You can see LED head temperature readings on the display!
Designed to dissipate heat,
estimation of life is easy.
While the display is showing
irradiation conditions, you can
see the temperature of the
LED head simply by pressing
the MODE button. The
controller is designed to
dissipate heat, and it is easy
to estimation of life.
Strict quality control
Stable Irradiation
■
Typical characteristics of the high intensity head when our mounting bracket is used
7
6
Aicure UJ30/UJ35
Aicure UJ30/UJ35
http://industrial.panasonic.com/ac/e/fasys/warranty/index.jsp
http://industrial.panasonic.com/ac/e/salesnetwork/index.jsp
■ LED emission spectrum
Typical characteristics
100
80
60
40
20
0
350 360 370 380
Wavelength (nm)
Relative intensity (%)
390 400 410 420 430 440 450
365 nm wavelength 385 nm wavelength 405 nm wavelength
0 %
10 %
20 %
30 %
40 %
50 %
60 %
70 %
80 %
90 %
100 %
110 %
05,000 10,000 15,000 20,000 25,000 30,000 35,000
Irradiation time
(H)
Relative ratio (%)
50 °C 122 °F
■
Estimated life according to LED temperature (The value is not a guaranteed value.)
60 °C 140 °F 70 °C 158 °F
Panasonic's
original
The UV irradiation intensity of the LED heads can be relative
measured at the actual position by using the optional slim UV
sensor
(Note)
. It can also automatically adjust the UV intensity to
the preset level. Since the sensor only has 5 mm 0.197 in
thickness, which is similar to the workpiece, the intensity
measurement is possible without removing the system from the
production line, facilitating high-accuracy setting and in-line
condition optimization. The UV intensity can be checked and
adjusted at real time, enhancing the bonding and fixing reliability.
Generally, when the LED temperature rises, the UV irradiation
output decreases. To prevent the temperature to rise, the LED
heads are built with metal materials with fins to increase heat
dissipation. The LED heads are also equipped with a built-in
temperature sensor to feedback the temperature to the controller.
The controller will calculate the loss of power due to temperature
increase, enabling stable UV irradiation at an accuracy within
±3 % when the intensity is set to 80 %. This high performance is
ideal for high-quality and precision bonding applications.
The LED heads irradiate 365 nm,
385 nm wavelength UV rays or
405 nm short wavelength, which
do not contain infrared rays (heat)
unlike the light from the lamp type
system, preventing the
temperature rise of workpieces.
This is ideal for applications that
require high precision bonding
with minimum thermal distortion,
such as the assembly of thin
plastic lenses.
The irradiation can be programmed to controls the irradiation
power and time depending on the resin and curing appication,
supporting high-quality and high-precision bonding with
minimum cure shrinkage. In addition to the simple irradiation
mode which irradiation is continuously performed at a constant
intensity, up to 10 steps 7 different irradiation patterns
(7 product types) can be programmed for each of the four LED
head.
Prevention of resin curing defects and bonding faillures
Temperature feedback control
±3 % or better UV irradiation accuracy (for wavelength 365 nm / 385 nm type with the intensity set to 80 %)
Significantly higher reliability for bonding and fixing
Programmable irradiation function (for UJ35)
This function prevents curing distortion and enables
high-quality precision bonding.
Infrared rays-free UV irradiation
High-accuracy bonding without thermal distortion
5 mm
0.197 in
Panasonic's
original
100
90
80
70
60
0 5 10 15 20 25 30 35 40
Continuous lighting time (min)
UV intensity (%) (Note 1)
: When set to 100 %
: When set to 90 %
: When set to 80 %
Note: "100" indicates the 100 % intensity setting.
Slim UV sensor (for UJ35)
The UV sensor for measuring irradiation intensity
enables auto-turning in high-accuracy.
Note: UV intensity can be measured as a relative value.
Sensitivity adjustment of the UV sensor is carried out at 365 nm, if you use
the UV sensor at 385 nm or 405 nm, the displayed value may be greater than
the actual UV intensity.
For more information, please consult us.
[Conditions]
Workpieces: Optical pickup lenses
UV intensity: 250 mW/cm2
Irradiation distance: 20 mm 0.787 in
Typical characteristics
60
40
20
0
0 10 20 30 40
Lamp type
without filter
Lamp type
with filter
LED type
53 deg.
40 deg.
3.4 deg.
Irradiation time (sec.)
Program mode
Program 1 Program 7
STEP=1
STEP=10
Interval (closed)
Constant intensity
…
STEP=1
STEP=3
→ Time
Programmable irradiationSimple irradiation
Step-up irradiation Irradiation at
specifiedintervals
Temperature rise (deg.)
→ UV intensity
One of the biggest benefits of using the LED type is that the light
source life is much longer than lamps used in lamp type. The life
of the lamp is 3,000 hours approx., but the LED has 20,000 hours
approx. Further more, unlike the lamp type, which needs to be
kept turned on through out the operation, the LED type can turn
on UV irradiation only when it is needed. When the irradiation
ON/OFF time ratio is 1:4 (process cycle time = 5, irradiation time
= 1), the LED type operation life is equivalent to 100,000 hours
approx. compared to lamp types, leading to significant reductions
in running costs and hours for maintenance.
Reliable operation anywhere in the world
Covered by the global
3-year warranty
Flexible cable for LED head will enable installation to
even moving sections.
Standard Flexible head cables
Flexible cable has been adopted as the standard LED head
connection cable considering that the LED heads will be
mounted on to a moving section. Unlike silica fiber cables
where there is a risk of damaging the cable by moving the cable
too much, these flexible cables can be easily handled without
risk of damageing. (withstanding 10 million bends to a radius of
33 mm 1.299 in based on our evaluation). The cables can be
extended to a maximum of 10 m 32.808 ft using extension
cables, which also have the same flexiblility.
Frequent part replacement is reduced by LED type.
Long-lasting cost effective LED type
Lead and Mercury free
Eco product compliant with CE, RoHS, etc.
Ideal for high-precision process. Helps reducing costs.
Cooling fan-less structure
Without the need for a cooling fan, it is ideal for vibration-
sensitive or dust-sensitive high precision process. Also, this
design reduces need for exhaust ventilation ducting and related
installation work as well as the running costs for exhaust
ventilation and air conditioning.
6.6-fold
33-fold
Lamp type
continuous
lighting
3,000 hours
approx.
LED type
continuous
lighting
20,000 hours
approx.
LED type
ON/OFF control
100,000 hours
approx.
OFF
OFF
ON
ON
ON
ON
ON
ON
OFF
OFF
Unlike lamps LED heads do not contain mercury. UJ30 and
UJ35 conform to CE Marking, RoHS Directive, and
Management Methods for Controlling Pollution by Electronic
Information Products (China RoHS), ensuring environmentally
safe use. (Please follow the proper industrial waste disposal
procedures.)
(The minimum allowable bend radius for 5 m 16.404 ft or longer cable
diameter ø7.6 mm ø0.299 in is R45.6 mm R1.795 in.)
Available for worldwide use
We have local sales companies to support the expansion of
customers’ global operations. Please visit our website to see
our worldwide sales network.
Panasonic's
original
Panasonic's
original
Intensity Profiles (Typical example)
Featuring Panasonic high-efficiency lens (Note)
High-output head UV wavelength 365 nm (ANUJ6186)
Inherits an existing intensity profile
Standard type head UV wavelength 365 nm (ANUJ6180)
Note: Lens embedded in the head of ANUJ6186, ANUJ6188 or ANUJ6189.
* WD: Working Distance (mm)
* WD: Working Distance (mm)
* WD: Working Distance (mm)
* WD: Working Distance (mm)
* WD: Working Distance (mm)
* WD: Working Distance (mm)
* WD: Working Distance (mm)
* WD: Working Distance (mm)
9
8
Aicure UJ30/UJ35
Aicure UJ30/UJ35
Standard lens and Protective glass
Side view lens
Rod lens
Cylindrical lens
Rod diameter: 6 mm 0.236 in (custom-made products)Rod diameter: 4 mm 0.157 in (custom-made products)
Standard lens and Protective glass
Side view lens
Rod lens
Cylindrical lens
ANUJ6467L
-5 -4 -3 -2 -1 012345
3,000
4,000
5,000
6,000
7,000
8,000
2,000
1,000
0
WD=3
WD=5
WD=10
WD=15
WD=20
WD=25
ANUJ6447L
-5 -4 -3 -2 -1 012345
- 0 .197 - 0 .15 7 - 0.118 -0.079 -0.039 00.039 0.079 0.118 0 .15 7 0 .19 7- 0 .197 - 0 .15 7 - 0.118 -0.079 -0.039 00.039 0.079 0.118 0 .157 0 .197
3,000
4,000
5,000
6,000
7,000
8,000
2,000
1,000
0
WD=3
WD=5
WD=7
WD=10
WD=15
WD=20
WD=25
-5 -4 -3 -2 -1 012345
3,000
4,000
5,000
6,000
7,000
8,000
2,000
1,000
0
WD=5
WD=7
WD=10
WD=15
WD=20
WD=25
-5 -4 -3 -2 -1 012345
- 0 .197 - 0 .15 7 - 0.118 -0.079 -0.039 00.039 0.079 0.118 0 .15 7 0 .19 7- 0 .197 - 0 .15 7 - 0.118 -0.079 -0.039 00.039 0.079 0.118 0 .157 0 .197
3,000
4,000
5,000
6,000
7,000
8,000
2,000
1,000
0
WD=3
WD=5
WD=7
WD=10
WD=15
WD=20
Please see the Web site for intensity profiles data of UV wavelengths 385 nm
(ANUJ6184, ANUJ6188) and 405 nm (ANUJ6187, ANUJ6189).
http://industrial.panasonic.com/ac/e/fasys/uv/led/uj30-uj35/data/index.jsp
Please see the Web site for intensity profiles data of UV wavelengths 385 nm
(ANUJ6184, ANUJ6188) and 405 nm (ANUJ6187, ANUJ6189).
http://industrial.panasonic.com/ac/e/fasys/uv/led/uj30-uj35/data/index.jsp
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Note: Rod lens combined with ANUJ6186, ANUJ6188
and ANUJ6189 high-output heads are treated as
custom-made products. Please consult us for
further information.
WD=10
WD=12
WD=14
WD=16
WD=20
WD=8
ANUJ6423 (ø3 mm ø 0.118 in)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
22,000
-5 -4 -3 -2 -1 012345
Irradiation area (mm in)
UV intensity
(mW/cm2)
WD=10
WD=12
WD=15
WD=20
WD=25
WD=30
WD=50
WD=8
ANUJ6424 (ø4 mm ø0.157 in)
-5 -4 -3 -2 -1 012345
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
ANUJ6426 (ø6 mm ø0.236 in)
-5 -4 -3 -2 -1 012345
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
WD=50
ANUJ6428 (ø8 mm ø0.315 in)
-5 -4 -3 -2 -1 012345
0
1,500
1,000
500
2,000
2,500
3,000
3,500
4,000
4,500
5,000
5,500
6,000
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
WD=50
ANUJ6420 (ø10 mm ø0.394 in)
0
200
400
600
800
1,000
1,200
1,400
1,600
1,800
2,000
-5-6-7 -4 -3 -2 -1 01234567
WD=10
WD=15
WD=20
WD=25
WD=30
WD=35
WD=50
ANUJ6430 (Protective glass)
0
100
200
300
400
500
600
700
800
-10-12 -8 -6 -4 -2 0246810 12
- 0 .197 - 0 .15 7 - 0.118 - 0.079 -0.039 00.039 0.079 0 .118 0 .15 7 0 .19 7 - 0 .197 - 0 .15 7 - 0.118 - 0.079 -0.039 00.039 0.079 0 .118 0 .15 7 0 .19 7 - 0 .197 - 0 .15 7 - 0.118 - 0.079 -0.039 00.039 0.079 0.118 0.157 0.197
- 0 .197 - 0 .15 7 - 0.118 - 0.079 -0.039 00.039 0.079 0.118 0.157 0.197
- 0 .197-0.236-0.276 - 0 .15 7 - 0 .118 -0.079 -0.039 00.039 0.079 0.118 0.157 0.197 0.236 0.276
-0.394-0.472 -0.315 -0.236 - 0 .15 7 -0.079 00.079 0.15 7 0.236 0.315 0.394 0.472
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
WD=50
ANUJ6426SV (ø6 mm ø0.236 in)
-5 -4 -3 -2 -1 012345
WD=5
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
3,000
4,000
5,000
6,000
7,000
8,000
2,000
1,000
0
ANUJ6428SV (ø8 mm ø0.315 in)
-5 -4 -3 -2 -1 012345
WD=5
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
2,500
3,000
3,500
4,000
4,500
5,000
2,000
1,500
1,000
500
0
ANUJ6420SV (ø10 mm ø0.394 in)
-5 -4-7 -6 -3 -2 -1 01234567
WD=5
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
WD=10
WD=12
WD=14
WD=16
WD=20
ANUJ6423 (ø3 mm ø 0.118 in)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
22,000
-5 -4 -3 -2 -1 012345
WD=10
WD=12
WD=15
WD=20
WD=25
WD=30
WD=50
ANUJ6424 (ø4 mm ø0.157 in)
-5 -4 -3 -2 -1 012345
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
ANUJ6426 (ø6 mm ø0.236 in)
-5 -4 -3 -2 -1 012345
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
WD=50
ANUJ6428 (ø8 mm ø0.315 in)
-5 -4 -3 -2 -1 012345
0
1,500
1,000
500
2,000
2,500
3,000
3,500
4,000
4,500
5,000
5,500
6,000
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
WD=50
ANUJ6450S
-5 -4-7 -6-8-10 -9 -3 -2 -1 012345678910
2,000
1,800
2,200
1,600
1,400
1,000
600
1,200
800
400
200
0
(Longitudinal direction)
-5 -4 -3 -2 -1 012345
(Width direction)
WD=10
WD=15
WD=20
WD=10
WD=15
WD=20
-5 -4 -3 -2 -1 012345
(Width direction)
ANUJ6475S
-5 -4-7 -6-8-10 -9 -3 -2 -1 012345678910
- 0 .197 - 0 .15 7 - 0.118 -0.079 -0.039 00.039 0.079 0.118 0 .157 0 .197 - 0 .197 - 0 .15 7 - 0.118 -0.079 -0.039 00.039 0.079 0.118 0 .157 0 .197
- 0 .197 - 0 .15 7-0.276 -0.236 - 0 .118 -0.079 -0.039 00.039 0.079 0.118 0.15 7 0.19 7 0.236 0.276
- 0 .197 - 0.15 7-0.276 -0.236-0.315-0.394 -0.354 - 0 .118 -0.079 -0.039 00.039 0.079 0.118 0.157 0.197 0.236 0.276 0.315 0.354 0.394 - 0 .197 - 0.15 7 - 0 .118 -0.079 -0.039 00.039 0.079 0 .118 0 .15 7 0 .197 - 0 .197 - 0.15 7 - 0 .118 -0.079 -0.039 00.039 0.079 0 .118 0 .15 7 0 .197- 0 .197 - 0.15 7-0.276 -0.236-0.315-0.394 -0.354 - 0 .118 -0.079 -0.039 00.039 0.079 0.118 0.157 0.197 0.236 0.276 0.315 0.354 0.394
2,000
1,800
2,200
1,600
1,400
1,000
600
1,200
800
400
200
0
(Longitudinal direction)
WD=10
WD=15
WD=20
WD=10
WD=15
WD=20
-5 -4 -3 -2 -1 012345-5 -4-7 -6-8-10 -9 -3 -2 -1 012345678910
2,000
1,800
2,200
1,600
1,400
1,000
600
1,200
800
400
200
0
WD=10
WD=15
WD=20
WD=10
WD=15
WD=20
ANUJ6450S
(Longitudinal direction)
(Width direction)
-5 -4 -3 -2 -1 012345-5 -4-7 -6-8-10 -9 -3 -2 -1 012345678910
2,000
1,800
2,200
1,600
1,400
1,000
600
1,200
800
400
200
0
WD=10
WD=15
WD=20
WD=10
WD=15
WD=20
ANUJ6475S
(Longitudinal direction)
(Width direction)
900
1,000
1,10 0
1,200
1,400
1,300
1,500
800
700
500
300
600
400
200
100
0
ANUJ6420SV (ø10 mm ø0.394 in)
-5 -4-7 -6 -3 -2 -1 01234567
WD=5
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
900
1,000
1,10 0
1,200
1,400
1,300
1,500
800
700
500
300
600
400
200
100
0
ANUJ6426SV (ø6 mm ø0.236 in)
-5 -4 -3 -2 -1 012345
WD=5
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
3,000
4,000
5,000
6,000
7,000
8,000
2,000
1,000
0
ANUJ6428SV (ø8 mm ø0.315 in)
WD=5
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
2,500
3,000
3,500
4,000
4,500
5,000
2,000
1,500
1,000
500
0
-5 -4 -3 -2 -1 012345
ANUJ6420 (ø10 mm ø0.394 in)
0
200
400
600
800
1,000
1,200
1,400
1,600
1,800
2,000
-5-6-7 -4 -3 -2 -1 01234567
WD=10
WD=15
WD=20
WD=25
WD=30
WD=50
ANUJ6430 (Protective glass)
0
100
200
300
400
500
600
700
800
-10-12 -8 -6 -4 -2 0246810 12
- 0 .197 - 0 .15 7 - 0.118 - 0.079 -0.039 00.039 0.079 0 .118 0 .15 7 0 .19 7 - 0 .197 - 0 .15 7 - 0.118 - 0.079 -0.039 00.039 0.079 0 .118 0 .15 7 0 .19 7 - 0 .197 - 0 .15 7 - 0.118 - 0.079 -0.039 00.039 0.079 0.118 0.157 0.197
- 0 .197 - 0 .15 7 - 0.118 - 0.079 -0.039 00.039 0.079 0.118 0.157 0.197
- 0 .197 - 0.15 7 - 0 .118 -0.079 -0.039 00.039 0.079 0 .118 0 .15 7 0 .197- 0 .197 - 0.15 7-0.276 -0.236-0.315-0.394 -0.354 - 0 .118 -0.079 -0.039 00.039 0.079 0.118 0.157 0.197 0.236 0.276 0.315 0.354 0.394 - 0 .197 - 0.15 7 - 0 .118 -0.079 -0.039 00.039 0.079 0 .118 0 .15 7 0 .197- 0 .197 - 0.15 7-0.276 -0.236-0.315-0.394 -0.354 - 0 .118 -0.079 -0.039 00.039 0.079 0.118 0.157 0.197 0.236 0.276 0.315 0.354 0.394
- 0 .197 - 0 .15 7-0.276 -0.236 - 0 .118 -0.079 -0.039 00.039 0.079 0.118 0.15 7 0.197 0.236 0.276
- 0 .197 - 0 .15 7 - 0.118 -0.079 -0.039 00.039 0.079 0.118 0 .157 0 .197 - 0.19 7 - 0 .15 7 - 0.118 -0.079-0.039 00.039 0.079 0.118 0 .157 0 .197
- 0 .197-0.236-0.276 - 0 .15 7 - 0 .118 -0.079 -0.039 00.039 0.079 0.118 0.157 0.197 0.236 0.276
-0.394-0.472 -0.315 -0.236 - 0 .15 7 -0.079 00.079 0.15 7 0.236 0.315 0.394 0.472
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
WD=50
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in) Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in) Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in) Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in) Irradiation area (mm in)
UV intensity
(mW/cm2)
Intensity Profiles (Typical example)
Featuring Panasonic high-efficiency lens (Note)
High-output head UV wavelength 365 nm (ANUJ6186)
Inherits an existing intensity profile
Standard type head UV wavelength 365 nm (ANUJ6180)
Note: Lens embedded in the head of ANUJ6186, ANUJ6188 or ANUJ6189.
* WD: Working Distance (mm)
* WD: Working Distance (mm)
* WD: Working Distance (mm)
* WD: Working Distance (mm)
* WD: Working Distance (mm)
* WD: Working Distance (mm)
* WD: Working Distance (mm)
* WD: Working Distance (mm)
9
8
Aicure UJ30/UJ35
Aicure UJ30/UJ35
Standard lens and Protective glass
Side view lens
Rod lens
Cylindrical lens
Rod diameter: 6 mm 0.236 in (custom-made products)Rod diameter: 4 mm 0.157 in (custom-made products)
Standard lens and Protective glass
Side view lens
Rod lens
Cylindrical lens
ANUJ6467L
-5 -4 -3 -2 -1 012345
3,000
4,000
5,000
6,000
7,000
8,000
2,000
1,000
0
WD=3
WD=5
WD=10
WD=15
WD=20
WD=25
ANUJ6447L
-5 -4 -3 -2 -1 012345
- 0 .197 - 0 .15 7 - 0.118 -0.079 -0.039 00.039 0.079 0.118 0 .15 7 0 .19 7- 0 .197 - 0 .15 7 - 0.118 -0.079 -0.039 00.039 0.079 0.118 0 .157 0 .197
3,000
4,000
5,000
6,000
7,000
8,000
2,000
1,000
0
WD=3
WD=5
WD=7
WD=10
WD=15
WD=20
WD=25
-5 -4 -3 -2 -1 012345
3,000
4,000
5,000
6,000
7,000
8,000
2,000
1,000
0
WD=5
WD=7
WD=10
WD=15
WD=20
WD=25
-5 -4 -3 -2 -1 012345
- 0 .197 - 0 .15 7 - 0.118 -0.079 -0.039 00.039 0.079 0.118 0 .15 7 0 .19 7- 0 .197 - 0 .15 7 - 0.118 -0.079 -0.039 00.039 0.079 0.118 0 .157 0 .197
3,000
4,000
5,000
6,000
7,000
8,000
2,000
1,000
0
WD=3
WD=5
WD=7
WD=10
WD=15
WD=20
Please see the Web site for intensity profiles data of UV wavelengths 385 nm
(ANUJ6184, ANUJ6188) and 405 nm (ANUJ6187, ANUJ6189).
http://industrial.panasonic.com/ac/e/fasys/uv/led/uj30-uj35/data/index.jsp
Please see the Web site for intensity profiles data of UV wavelengths 385 nm
(ANUJ6184, ANUJ6188) and 405 nm (ANUJ6187, ANUJ6189).
http://industrial.panasonic.com/ac/e/fasys/uv/led/uj30-uj35/data/index.jsp
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Note: Rod lens combined with ANUJ6186, ANUJ6188
and ANUJ6189 high-output heads are treated as
custom-made products. Please consult us for
further information.
WD=10
WD=12
WD=14
WD=16
WD=20
WD=8
ANUJ6423 (ø3 mm ø 0.118 in)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
22,000
-5 -4 -3 -2 -1 012345
Irradiation area (mm in)
UV intensity
(mW/cm2)
WD=10
WD=12
WD=15
WD=20
WD=25
WD=30
WD=50
WD=8
ANUJ6424 (ø4 mm ø0.157 in)
-5 -4 -3 -2 -1 012345
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
ANUJ6426 (ø6 mm ø0.236 in)
-5 -4 -3 -2 -1 012345
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
WD=50
ANUJ6428 (ø8 mm ø0.315 in)
-5 -4 -3 -2 -1 012345
0
1,500
1,000
500
2,000
2,500
3,000
3,500
4,000
4,500
5,000
5,500
6,000
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
WD=50
ANUJ6420 (ø10 mm ø0.394 in)
0
200
400
600
800
1,000
1,200
1,400
1,600
1,800
2,000
-5-6-7 -4 -3 -2 -1 01234567
WD=10
WD=15
WD=20
WD=25
WD=30
WD=35
WD=50
ANUJ6430 (Protective glass)
0
100
200
300
400
500
600
700
800
-10-12 -8 -6 -4 -2 0246810 12
- 0 .197 - 0 .15 7 - 0.118 - 0.079 -0.039 00.039 0.079 0 .118 0 .15 7 0 .19 7 - 0 .197 - 0 .15 7 - 0.118 - 0.079 -0.039 00.039 0.079 0 .118 0 .15 7 0 .19 7 - 0 .197 - 0 .15 7 - 0.118 - 0.079 -0.039 00.039 0.079 0.118 0.157 0.197
- 0 .197 - 0 .15 7 - 0.118 - 0.079 -0.039 00.039 0.079 0.118 0.157 0.197
- 0 .197-0.236-0.276 - 0 .15 7 - 0 .118 -0.079 -0.039 00.039 0.079 0.118 0.157 0.197 0.236 0.276
-0.394-0.472 -0.315 -0.236 - 0 .15 7 -0.079 00.079 0.15 7 0.236 0.315 0.394 0.472
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
WD=50
ANUJ6426SV (ø6 mm ø0.236 in)
-5 -4 -3 -2 -1 012345
WD=5
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
3,000
4,000
5,000
6,000
7,000
8,000
2,000
1,000
0
ANUJ6428SV (ø8 mm ø0.315 in)
-5 -4 -3 -2 -1 012345
WD=5
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
2,500
3,000
3,500
4,000
4,500
5,000
2,000
1,500
1,000
500
0
ANUJ6420SV (ø10 mm ø0.394 in)
-5 -4-7 -6 -3 -2 -1 01234567
WD=5
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
WD=10
WD=12
WD=14
WD=16
WD=20
ANUJ6423 (ø3 mm ø 0.118 in)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
22,000
-5 -4 -3 -2 -1 012345
WD=10
WD=12
WD=15
WD=20
WD=25
WD=30
WD=50
ANUJ6424 (ø4 mm ø0.157 in)
-5 -4 -3 -2 -1 012345
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
ANUJ6426 (ø6 mm ø0.236 in)
-5 -4 -3 -2 -1 012345
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
WD=50
ANUJ6428 (ø8 mm ø0.315 in)
-5 -4 -3 -2 -1 012345
0
1,500
1,000
500
2,000
2,500
3,000
3,500
4,000
4,500
5,000
5,500
6,000
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
WD=50
ANUJ6450S
-5 -4-7 -6-8-10 -9 -3 -2 -1 012345678910
2,000
1,800
2,200
1,600
1,400
1,000
600
1,200
800
400
200
0
(Longitudinal direction)
-5 -4 -3 -2 -1 012345
(Width direction)
WD=10
WD=15
WD=20
WD=10
WD=15
WD=20
-5 -4 -3 -2 -1 012345
(Width direction)
ANUJ6475S
-5 -4-7 -6-8-10 -9 -3 -2 -1 012345678910
- 0 .197 - 0 .15 7 - 0.118 -0.079 -0.039 00.039 0.079 0.118 0 .157 0 .197 - 0 .197 - 0 .15 7 - 0.118 -0.079 -0.039 00.039 0.079 0.118 0 .157 0 .197
- 0 .197 - 0 .15 7-0.276 -0.236 - 0 .118 -0.079 -0.039 00.039 0.079 0.118 0.15 7 0.19 7 0.236 0.276
- 0 .197 - 0.15 7-0.276 -0.236-0.315-0.394 -0.354 - 0 .118 -0.079 -0.039 00.039 0.079 0.118 0.157 0.197 0.236 0.276 0.315 0.354 0.394 - 0 .197 - 0.15 7 - 0 .118 -0.079 -0.039 00.039 0.079 0 .118 0 .15 7 0 .197 - 0 .197 - 0.15 7 - 0 .118 -0.079 -0.039 00.039 0.079 0 .118 0 .15 7 0 .197- 0 .197 - 0.15 7-0.276 -0.236-0.315-0.394 -0.354 - 0 .118 -0.079 -0.039 00.039 0.079 0.118 0.157 0.197 0.236 0.276 0.315 0.354 0.394
2,000
1,800
2,200
1,600
1,400
1,000
600
1,200
800
400
200
0
(Longitudinal direction)
WD=10
WD=15
WD=20
WD=10
WD=15
WD=20
-5 -4 -3 -2 -1 012345-5 -4-7 -6-8-10 -9 -3 -2 -1 012345678910
2,000
1,800
2,200
1,600
1,400
1,000
600
1,200
800
400
200
0
WD=10
WD=15
WD=20
WD=10
WD=15
WD=20
ANUJ6450S
(Longitudinal direction)
(Width direction)
-5 -4 -3 -2 -1 012345-5 -4-7 -6-8-10 -9 -3 -2 -1 012345678910
2,000
1,800
2,200
1,600
1,400
1,000
600
1,200
800
400
200
0
WD=10
WD=15
WD=20
WD=10
WD=15
WD=20
ANUJ6475S
(Longitudinal direction)
(Width direction)
900
1,000
1,10 0
1,200
1,400
1,300
1,500
800
700
500
300
600
400
200
100
0
ANUJ6420SV (ø10 mm ø0.394 in)
-5 -4-7 -6 -3 -2 -1 01234567
WD=5
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
900
1,000
1,10 0
1,200
1,400
1,300
1,500
800
700
500
300
600
400
200
100
0
ANUJ6426SV (ø6 mm ø0.236 in)
-5 -4 -3 -2 -1 012345
WD=5
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
3,000
4,000
5,000
6,000
7,000
8,000
2,000
1,000
0
ANUJ6428SV (ø8 mm ø0.315 in)
WD=5
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
2,500
3,000
3,500
4,000
4,500
5,000
2,000
1,500
1,000
500
0
-5 -4 -3 -2 -1 012345
ANUJ6420 (ø10 mm ø0.394 in)
0
200
400
600
800
1,000
1,200
1,400
1,600
1,800
2,000
-5-6-7 -4 -3 -2 -1 01234567
WD=10
WD=15
WD=20
WD=25
WD=30
WD=50
ANUJ6430 (Protective glass)
0
100
200
300
400
500
600
700
800
-10-12 -8 -6 -4 -2 0246810 12
- 0 .197 - 0 .15 7 - 0.118 - 0.079 -0.039 00.039 0.079 0 .118 0 .15 7 0 .19 7 - 0 .197 - 0 .15 7 - 0.118 - 0.079 -0.039 00.039 0.079 0 .118 0 .15 7 0 .19 7 - 0 .197 - 0 .15 7 - 0.118 - 0.079 -0.039 00.039 0.079 0.118 0.157 0.197
- 0 .197 - 0 .15 7 - 0.118 - 0.079 -0.039 00.039 0.079 0.118 0.157 0.197
- 0 .197 - 0.15 7 - 0 .118 -0.079 -0.039 00.039 0.079 0 .118 0 .15 7 0 .197- 0 .197 - 0.15 7-0.276 -0.236-0.315-0.394 -0.354 - 0 .118 -0.079 -0.039 00.039 0.079 0.118 0.157 0.197 0.236 0.276 0.315 0.354 0.394 - 0 .197 - 0.15 7 - 0 .118 -0.079 -0.039 00.039 0.079 0 .118 0 .15 7 0 .197- 0 .197 - 0.15 7-0.276 -0.236-0.315-0.394 -0.354 - 0 .118 -0.079 -0.039 00.039 0.079 0.118 0.157 0.197 0.236 0.276 0.315 0.354 0.394
- 0 .197 - 0 .15 7-0.276 -0.236 - 0 .118 -0.079 -0.039 00.039 0.079 0.118 0.15 7 0.197 0.236 0.276
- 0 .197 - 0 .15 7 - 0.118 -0.079 -0.039 00.039 0.079 0.118 0 .157 0 .197 - 0.19 7 - 0 .15 7 - 0.118 -0.079-0.039 00.039 0.079 0.118 0 .157 0 .197
- 0 .197-0.236-0.276 - 0 .15 7 - 0 .118 -0.079 -0.039 00.039 0.079 0.118 0.157 0.197 0.236 0.276
-0.394-0.472 -0.315 -0.236 - 0 .15 7 -0.079 00.079 0.15 7 0.236 0.315 0.394 0.472
WD=10
WD=15
WD=20
WD=25
WD=30
WD=40
WD=50
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in) Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in) Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in) Irradiation area (mm in)
UV intensity
(mW/cm2)
Irradiation area (mm in) Irradiation area (mm in)
UV intensity
(mW/cm2)
Wide variation Product Lineup
Controllers ● Up to four heads
can be connected.
● With an AC adapter
(ANUJ6802)
● Compatible with a UV
sensor (ANUJ3800)
● Up to four heads
can be connected.
● With an AC adapter
(ANUJ6802)
Standard lens
ANUJ642*
● Circular irradiation
ø13 mm 0.118 in: ANUJ6423
ø14 mm 0.157 in: ANUJ6424
ø16 mm 0.236 in: ANUJ6426
ø18 mm 0.315 in: ANUJ6428
ø10 mm 0.394 in: ANUJ6420
Side view lens
ANUJ642*SV
● Circular irradiation Angled at 90°
ø16 mm 0.236 in: ANUJ6426SV
ø18 mm 0.315 in: ANUJ6428SV
ø10 mm 0.394 in: ANUJ6420SV
Cylindrical lens
ANUJ64**S
● Elliptical irradiation
R5 : ANUJ6450S
R7.5: ANUJ6475S
Rod lens
ANUJ64*7L (For standard head)
● Small diameter
circular irradiation
ø4 mm 0.157 in: ANUJ6447L
ø6 mm 0.236 in: ANUJ6467L
(Note 1)
Heads & Cables
Lenses
UJ30 controller UJ35 controller UV sensor
ANUJ3800
Options
UV sensor extension cable
ANUJ38110
(10 m 32.808 ft)
ANUJ38102
(2 m 6.562 ft)
ANUJ3000 ANUJ3500
11
10
Aicure UJ30/UJ35
ANUJ6180
●
ø12 × 50 mm ø0.472 × 1.969 in
● Cable length 0.2 m 0.656 ft
Standard type 365 nm
ANUJ6186
High-output head 365 nm
●
ø12 × 50 mm ø0.472 × 1.969 in
● Cable length 0.2 m 0.656 ft
ANUJ6184
Standard type 385 nm
●
ø12 × 50 mm ø0.472 × 1.969 in
● Cable length 0.2 m 0.656 ft
ANUJ6188
High-output head 385 nm
●
ø12 × 50 mm ø0.472 × 1.969 in
● Cable length 0.2 m 0.656 ft
High-output head 405 nm
●
ø12 × 50 mm ø0.472 × 1.969 in
● Cable length 0.2 m 0.656 ft
ANUJ6189
ANUJ6803
200 V AC power cable for
ANUJ6802 (Note 3)
200 V AC power cable
ANUJ6802
100 to 240 V AC adapter supplied with the controller unit
With a 100 V AC power cable
AC adapter (Note 2)
ANUJ6430
For head protection if lenses are
not used.
Protective glass
ANUJ6804
Mounting bracket
Head mounting bracket
Material: Aluminum
Dimensions (Unit: mm in) Excluding the protruding sections
Aicure UJ30/UJ35
Standard type 405 nm
●
ø12 × 50 mm ø0.472 × 1.969 in
● Cable length 0.2 m 0.656 ft
ANUJ6187
Connection cable
ANUJ62**
Cable length 1.7 m 5.906 ft (Cable diameter: ø 5.5 mm ø 0.217 in): ANUJ6220
Cable length 3 m 9.843 ft (Cable diameter: ø 5.5 mm ø 0.217 in): ANUJ6230
Cable length 5 m 16.404 ft (Cable diameter: ø 7.6 mm ø 0.299 in): ANUJ6250
Cable length 7 m 22.966 ft (Cable diameter: ø 7.6 mm ø 0.299 in): ANUJ6270
Cable length 10 m 32.808 ft (Cable diameter: ø 7.6 mm ø 0.299 in): ANUJ6200
UV sensor for UJ35 / UP50
UV sensor connection cable
Notes: 1) The head does not come with a lens.
2) The ANUJ6802 AC adapter is supplied with the controller unit. The ANUJ6802 AC adapter is compatible with 100 to 240 V AC;
however, the primary-side power cable is compatible with 100 V AC only. For use in a 200 V AC region, purchase the ANUJ6803 primary-side power cable (for 200 V AC) separately.
3) For China only. Primary-side A-type plug. (Since this product is not PSE Mark compliant, it cannot be connected directly to a lamp line in Japan.)
ANUJ38102 is the same cable
that ships with the UV sensor
includes 2 m 6.562 ft
ANUJ38102 cable
*Rod lens combined with ANUJ6186, ANUJ6188 and
ANUJ6189 are treated as custom-made products.
Please consult us.
UJ30 / UJ35
Connection cable
ANUJ6220
Head sections (with standard lens)
ANUJ6180 / ANUJ6184 / ANUJ6186 / ANUJ6187 /
ANUJ6188 / ANUJ6189
UV sensor ANUJ3800
AC adapter ANUJ6802
200V AC power cable ANUJ6803
Mounting bracket for head
ANUJ6804
UJ35 Controller
ANUJ3500
(Weight: 960 g approx.)
UJ30 Controller
ANUJ3000
(Weight: 940 g approx.)
140 5.512
Standard and Cylindrical lens Rod lens
Side view lens
Protective glass
ANUJ6467L
ANUJ6447L
10.5
59±0.5
10.5
130 5.118
80 3 .150
125 4.921
59±0.5
18.2
110.5±0.5
2.323
±0.020
2.323±0.020 4.350±0.020
(11.3)
0.413 0.4130.717 (0.445)
4-M3
Cable length
2m 6.562ft
Cable length
1m 3.281ft
2.0080.866
89.4 3.520
35 1.378
10 0.394
0.4720.197
5122
125
20 0.787 0.787
20
0.157
4
13 0.512
40
1.575
20 0.787
M6 Depth 5 0.197
2-M4 Depth 5 0.197
25 0.984
ø0.472 +0.004
−0.002
ø12 +0.10
+0.05
2-M3
1543
ø4
ø0.157
ø12
ø11.5
ø0.453
ø5.5
ø0. 217
1,700 0
−50
66.929 0
−1.969
ø12
1543
0.5911.693
0.5911.693
ø6
ø0.236
ø12
ø0.394
ø10
11
22
14
0.551
ø0.315
ø8
ø12
ø0.472 ø0.472
ø0.472
ø0.472
Input and Output specifications
Configuration
Input specifications
Foot switch
SIG SIG
SIG
UJ controller
UJ controller UJ controller UJ controller
UJ controller UJ controller
COM COM
COM
SIG
SIG
IN
COM
PLC
PLC
SIG
+5 V DC +5 V DC
COM COM
Tr output
from PLC
Open collector (Tr) or
non-voltage input such as a relay
Rated operation voltage:
5 to 24 V DC
Output capacity: 100 mA (max.)
5 to 24 V DC
Output specifications
With external power supply With internal power supply
Contact input Non-contact input
-
+
I/O list
INPUT OUTPUT
Terminal No.
1
2
3
4
5
6
7
8
9
10
11
12
Signal
START1
START2
START3
START4
TYPE Chg1 (Note 1)
TYPE Chg2 (Note 1)
TYPE Chg3 (Note 1)
UV CHECK (Note 1)
STOP
START-All
INTERLOCK (Note 3)
COM
Terminal No.
13
14
15
16
17
18
19
20
21
22
23
24
Signal
READY-All
READY/BUSY1 (Note 2)
READY/BUSY2 (Note 2)
READY/BUSY3 (Note 2)
READY/BUSY4 (Note 2)
ERROR
ALARM
COM
COM
FG
+5 V DC
COM
Four heads can be simultaneously connected to one controller.
UV sensor
Controller
Head sectionLens Connection cable
* Type A plug
5.5
0.433
0.866
0. 217
ø12
ø0.472
(9) (0.354)
121 4.764
0.559 × 1.122 × 0.323
Ferrite core: 14.2 × 28.5 × 8.2
50
1.969 10.5±0.5
0.413±0.020
13 . 2± 0.1
0.520±0.004
800 31.496
52
2.047
1830 72.047
33
1.299
2000 78.740
50 1.969
11 0.433
0.472
12
0.394
10
5.5
0. 217
200 7.8 74
LENS
34 1.339
Notes: 1) Nos. 5 / 6 / 7 / 8 (Type-Chg 1 / 2 / 3 and UV-CHECK) are functions
available UJ35 only.
These terminals for UJ30 are spare.
2) The READY/BUSY switching of Nos. 14 / 15 / 16 / 17 is performed on
the UJ30 / UJ35 controller.
3) At shipment, for B-contact (allows irradiation when ON), No.11
(INTERLOCK) is connected to No.12 (COM) by a short-circuit line.
365 nm
wavelength
high-output
head
Head model No. ANUJ6186
Compatible
lens
Spot diameter
ø3 mm ø0.118 in ø4 mm ø 0.157 in ø6 mm ø0.236 in
ø8 mm ø0.315 in
ø10 mm ø0.394 in
Protective glass (Note 2)
Lens model No.
ANUJ6423 ANUJ6424 ANUJ6426 ANUJ6428 ANUJ6420 ANUJ6430
UV intensity (mW/cm2) (Note 1)
17, 20 0 14,940 7, 560 4,450 1,360 530
Irradiation distance 8 mm 0.315 in 10 mm 0.394 in 15 mm 0.591 in 20 mm 0.787 in 30 mm 1.181 in 10 mm 0.394 in
365 nm
wavelength
standard type
Head model No. ANUJ6180
Compatible
lens
Spot diameter
ø3 mm ø0.118 in ø4 mm ø 0.157 in ø6 mm ø0.236 in
ø8 mm ø0.315 in
ø10 mm ø0.394 in
Protective glass (Note 2)
Lens model No.
ANUJ6423 ANUJ6424 ANUJ6426 ANUJ6428 ANUJ6420 ANUJ6430
UV intensity (mW/cm2) (Note 1)
12,500 10,600 4,720 2,500 580 300
Irradiation distance 10 mm 0.394 in 12mm 0.472 in 20 mm 0.787 in 25 mm 0.984 in 30 mm 1.181 in 10 mm 0.394 in
385 nm
wavelength
high-output
head
Head model No. ANUJ6188
Compatible
lens
Spot diameter
ø3 mm ø0.118 in ø4 mm ø 0.157 in ø6 mm ø0.236 in
ø8 mm ø0.315 in
ø10 mm ø0.394 in
Protective glass (Note 2)
Lens model No.
ANUJ6423 ANUJ6424 ANUJ6426 ANUJ6428 ANUJ6420 ANUJ6430
UV intensity (mW/cm2) (Note 1)
19,500 16,920 8,680 4,750 1,400 580
Irradiation distance 8 mm 0.315 in 10 mm 0.394 in 15 mm 0.591 in 20 mm 0.787 in 30 mm 1.181 in 10 mm 0.394 in
385 nm
wavelength
standard type
Head model No. ANUJ6184
Compatible
lens
Spot diameter
ø3 mm ø0.118 in ø4 mm ø 0.157 in ø6 mm ø0.236 in
ø8 mm ø0.315 in
ø10 mm ø0.394 in
Protective glass (Note 2)
Lens model No.
ANUJ6423 ANUJ6424 ANUJ6426 ANUJ6428 ANUJ6420
ANUJ6430
UV intensity (mW/cm2) (Note 1)
14,700 11,7 0 0 5,800 2,790 590 330
Irradiation distance 10 mm 0.394 in 12mm 0.472 in 15 mm 0.591 in 20 mm 0.787 in 30 mm 1.181 in 10 mm 0.394 in
405 nm
wavelength
high-output
head
Head model No. ANUJ6189
Compatible
lens
Spot diameter
ø3 mm ø0.118 in ø4 mm ø 0.157 in ø6 mm ø0.236 in
ø8 mm ø0.315 in
ø10 mm ø0.394 in
Protective glass (Note 2)
Lens model No.
ANUJ6423 ANUJ6424 ANUJ6426 ANUJ6428 ANUJ6420 ANUJ6430
UV intensity (mW/cm2) (Note 1)
20,900 1 7,8 0 0 9,19 0 5,450 1,790 810
Irradiation distance 8 mm 0.315 in 10 mm 0.394 in 15 mm 0.591 in 20 mm 0.787 in 30 mm 1.181 in 10 mm 0.394 in
405 nm
wavelength
standard
type
Head model No. ANUJ6187
Compatible
lens
Spot diameter
ø3 mm ø0.118 in ø4 mm ø 0.157 in ø6 mm ø0.236 in
ø8 mm ø0.315 in
ø10 mm ø0.394 in
Protective glass (Note 2)
Lens model No.
ANUJ6423 ANUJ6424 ANUJ6426 ANUJ6428 ANUJ6420 ANUJ6430
UV intensity (mW/cm2) (Note 1)
15,500 12,600 5,730 3 ,150 890 440
Irradiation distance 10 mm 0.394 in 12mm 0.472 in 20 mm 0.787 in 25 mm 0.984 in 30 mm 1.181 in 10 mm 0.394 in
Controller Product type
UJ30 (Standard model) UJ35 (High performance model)
Controller Part No. ANUJ3000 ANUJ3500
Connectable
heads 1 to 4 heads
Connectable UV
sensor
Not compatible Compatible
UV irradiation
One pattern irradiation in simple mode
The heads are either collectively or
individually controlled.
One pattern in simple mode and
programmed pattern irradiation (up to 7
patterns with up to 10 steps)
The heads are either collectively or
individually controlled.
Pattern switching None (1 type) Switchable (8 types)
Intensity /
irradiation control
Digital intensity and irradiation control manual or timer control
(0.1 to 99.9, 100 to 999 sec.)
Auto-tuning function using the UV sensor (for UJ35 only)
Specications of UV sensor: [Temperature characteristic: ±5 % F.S.
(+5 to +35 °C 41 to 95 °F) / Repeat accuracy: ±1 % (25 °C 77 °F)]
Setting/Operation Setting by the operation switches and
power-on/o by a key switch
Setting by the operation switches,
power-on/o by a key switch and
RS232C (UJ35 setup tool)
Display 7-segment display
Cooling system Natural cooling (without a fan)
External
control
Method Parallel I/O RS232C, Parallel I/O
External
input
Individual irradiation input, irradiation stop input, interlock, full-irradiation input,
pattern switching (for UJ35 only)
External
output
READY signal, error signal, alarm output, BUSY output (each head separately),
+5 V output (for indicator)
Operating voltage With AC adapter: 100 - 240 V AC (±10 %) 50 / 60 Hz 60 VA (at 100 V AC)
Ambient
temperature /
humidity range
0 to +35 °C 32 to 95 °F / 30 to 85 % RH (no condensation)
Storage
temperature /
humidity
range
–10 to +60 °C 14 to 140 °F / 30 to 85 % RH (no condensation)
Accessories AC adapter and Key
Weight
1,180 g approx. (Controller: 940 g approx.,
AC adapter: 240 g approx.)
1,200 g approx. (Controller: 960 g approx.,
AC adapter: 240 g approx.)
Common
item
Light source
Class 3B LED product (JIS C6802:2005) Risk group 3 (ANUJ6189 / ANUJ6187: Risk group 2) (IEC 62471)
Estimated light source life (Note 3)
20,000 hours (when the LED temperature inside the head is 60°C 140°F)
Cable length
0.2 m 0.656 ft A connection cable is required to connect the high-output head to a UJ series controller.
Operating temperature and humidity
+5 to +35 °C +41 to +95 °F / 30 to 85 % RH (No condensation)
Storage temperature and humidity
–10 to +60 °C +14 to +140 °F / 30 to 85 % RH (No condensation)
Notes: 1) The values were measured using a UJ30 / UJ35 illuminometer with ø1 mm ø0.039 in sensor hole when the high-output
heads were xed to the attachment, the ambient temperature was maintained at 25 °C 77 °F by the UJ30 / UJ35, and they
were turned on with 100% output (initial value: based on Panasonic’s reference measurement method).
Since the LED elements show illumination intensity uctuations, the actual UV intensity may be more than 20 % higher.
2) It is recommended that protective glass (ANUJ6430) be used to protect the head-side lens from contamination when the
high-output head is used without a lens. For further information about protective glass, contact our sales oce.
3) The value is not a guaranteed value.
Specications
Controllers Heads
Wide variation Product Lineup
Controllers ● Up to four heads
can be connected.
● With an AC adapter
(ANUJ6802)
● Compatible with a UV
sensor (ANUJ3800)
● Up to four heads
can be connected.
● With an AC adapter
(ANUJ6802)
Standard lens
ANUJ642*
● Circular irradiation
ø13 mm 0.118 in: ANUJ6423
ø14 mm 0.157 in: ANUJ6424
ø16 mm 0.236 in: ANUJ6426
ø18 mm 0.315 in: ANUJ6428
ø10 mm 0.394 in: ANUJ6420
Side view lens
ANUJ642*SV
● Circular irradiation Angled at 90°
ø16 mm 0.236 in: ANUJ6426SV
ø18 mm 0.315 in: ANUJ6428SV
ø10 mm 0.394 in: ANUJ6420SV
Cylindrical lens
ANUJ64**S
● Elliptical irradiation
R5 : ANUJ6450S
R7.5: ANUJ6475S
Rod lens
ANUJ64*7L (For standard head)
● Small diameter
circular irradiation
ø4 mm 0.157 in: ANUJ6447L
ø6 mm 0.236 in: ANUJ6467L
(Note 1)
Heads & Cables
Lenses
UJ30 controller UJ35 controller UV sensor
ANUJ3800
Options
UV sensor extension cable
ANUJ38110
(10 m 32.808 ft)
ANUJ38102
(2 m 6.562 ft)
ANUJ3000 ANUJ3500
11
10
Aicure UJ30/UJ35
ANUJ6180
●
ø12 × 50 mm ø0.472 × 1.969 in
● Cable length 0.2 m 0.656 ft
Standard type 365 nm
ANUJ6186
High-output head 365 nm
●
ø12 × 50 mm ø0.472 × 1.969 in
● Cable length 0.2 m 0.656 ft
ANUJ6184
Standard type 385 nm
●
ø12 × 50 mm ø0.472 × 1.969 in
● Cable length 0.2 m 0.656 ft
ANUJ6188
High-output head 385 nm
●
ø12 × 50 mm ø0.472 × 1.969 in
● Cable length 0.2 m 0.656 ft
High-output head 405 nm
●
ø12 × 50 mm ø0.472 × 1.969 in
● Cable length 0.2 m 0.656 ft
ANUJ6189
ANUJ6803
200 V AC power cable for
ANUJ6802 (Note 3)
200 V AC power cable
ANUJ6802
100 to 240 V AC adapter supplied with the controller unit
With a 100 V AC power cable
AC adapter (Note 2)
ANUJ6430
For head protection if lenses are
not used.
Protective glass
ANUJ6804
Mounting bracket
Head mounting bracket
Material: Aluminum
Dimensions (Unit: mm in) Excluding the protruding sections
Aicure UJ30/UJ35
Standard type 405 nm
●
ø12 × 50 mm ø0.472 × 1.969 in
● Cable length 0.2 m 0.656 ft
ANUJ6187
Connection cable
ANUJ62**
Cable length 1.7 m 5.906 ft (Cable diameter: ø 5.5 mm ø 0.217 in): ANUJ6220
Cable length 3 m 9.843 ft (Cable diameter: ø 5.5 mm ø 0.217 in): ANUJ6230
Cable length 5 m 16.404 ft (Cable diameter: ø 7.6 mm ø 0.299 in): ANUJ6250
Cable length 7 m 22.966 ft (Cable diameter: ø 7.6 mm ø 0.299 in): ANUJ6270
Cable length 10 m 32.808 ft (Cable diameter: ø 7.6 mm ø 0.299 in): ANUJ6200
UV sensor for UJ35 / UP50
UV sensor connection cable
Notes: 1) The head does not come with a lens.
2) The ANUJ6802 AC adapter is supplied with the controller unit. The ANUJ6802 AC adapter is compatible with 100 to 240 V AC;
however, the primary-side power cable is compatible with 100 V AC only. For use in a 200 V AC region, purchase the ANUJ6803 primary-side power cable (for 200 V AC) separately.
3) For China only. Primary-side A-type plug. (Since this product is not PSE Mark compliant, it cannot be connected directly to a lamp line in Japan.)
ANUJ38102 is the same cable
that ships with the UV sensor
includes 2 m 6.562 ft
ANUJ38102 cable
*Rod lens combined with ANUJ6186, ANUJ6188 and
ANUJ6189 are treated as custom-made products.
Please consult us.
UJ30 / UJ35
Connection cable
ANUJ6220
Head sections (with standard lens)
ANUJ6180 / ANUJ6184 / ANUJ6186 / ANUJ6187 /
ANUJ6188 / ANUJ6189
UV sensor ANUJ3800
AC adapter ANUJ6802
200V AC power cable ANUJ6803
Mounting bracket for head
ANUJ6804
UJ35 Controller
ANUJ3500
(Weight: 960 g approx.)
UJ30 Controller
ANUJ3000
(Weight: 940 g approx.)
140 5.512
Standard and Cylindrical lens Rod lens
Side view lens
Protective glass
ANUJ6467L
ANUJ6447L
10.5
59±0.5
10.5
130 5.118
80 3 .150
125 4.921
59±0.5
18.2
110.5±0.5
2.323
±0.020
2.323±0.020 4.350±0.020
(11.3)
0.413 0.4130.717 (0.445)
4-M3
Cable length
2m 6.562ft
Cable length
1m 3.281ft
2.0080.866
89.4 3.520
35 1.378
10 0.394
0.4720.197
5122
125
20 0.787 0.787
20
0.157
4
13 0.512
40
1.575
20 0.787
M6 Depth 5 0.197
2-M4 Depth 5 0.197
25 0.984
ø0.472 +0.004
−0.002
ø12 +0.10
+0.05
2-M3
1543
ø4
ø0.157
ø12
ø11.5
ø0.453
ø5.5
ø0. 217
1,700 0
−50
66.929 0
−1.969
ø12
1543
0.5911.693
0.5911.693
ø6
ø0.236
ø12
ø0.394
ø10
11
22
14
0.551
ø0.315
ø8
ø12
ø0.472 ø0.472
ø0.472
ø0.472
Input and Output specifications
Configuration
Input specifications
Foot switch
SIG SIG
SIG
UJ controller
UJ controller UJ controller UJ controller
UJ controller UJ controller
COM COM
COM
SIG
SIG
IN
COM
PLC
PLC
SIG
+5 V DC +5 V DC
COM COM
Tr output
from PLC
Open collector (Tr) or
non-voltage input such as a relay
Rated operation voltage:
5 to 24 V DC
Output capacity: 100 mA (max.)
5 to 24 V DC
Output specifications
With external power supply With internal power supply
Contact input Non-contact input
-
+
I/O list
INPUT OUTPUT
Terminal No.
1
2
3
4
5
6
7
8
9
10
11
12
Signal
START1
START2
START3
START4
TYPE Chg1 (Note 1)
TYPE Chg2 (Note 1)
TYPE Chg3 (Note 1)
UV CHECK (Note 1)
STOP
START-All
INTERLOCK (Note 3)
COM
Terminal No.
13
14
15
16
17
18
19
20
21
22
23
24
Signal
READY-All
READY/BUSY1 (Note 2)
READY/BUSY2 (Note 2)
READY/BUSY3 (Note 2)
READY/BUSY4 (Note 2)
ERROR
ALARM
COM
COM
FG
+5 V DC
COM
Four heads can be simultaneously connected to one controller.
UV sensor
Controller
Head sectionLens Connection cable
* Type A plug
5.5
0.433
0.866
0. 217
ø12
ø0.472
(9) (0.354)
121 4.764
0.559 × 1.122 × 0.323
Ferrite core: 14.2 × 28.5 × 8.2
50
1.969 10.5±0.5
0.413±0.020
13 . 2± 0.1
0.520±0.004
800 31.496
52
2.047
1830 72.047
33
1.299
2000 78.740
50 1.969
11 0.433
0.472
12
0.394
10
5.5
0. 217
200 7.8 74
LENS
34 1.339
Notes: 1) Nos. 5 / 6 / 7 / 8 (Type-Chg 1 / 2 / 3 and UV-CHECK) are functions
available UJ35 only.
These terminals for UJ30 are spare.
2) The READY/BUSY switching of Nos. 14 / 15 / 16 / 17 is performed on
the UJ30 / UJ35 controller.
3) At shipment, for B-contact (allows irradiation when ON), No.11
(INTERLOCK) is connected to No.12 (COM) by a short-circuit line.
13
12
Aicure UD40
Aicure UD40
Panasonic original LED provides a
UV intensity* of 4,600 mW/cm2.
The wavelength 365 nm 0.014 mil type and 385 nm
0.015 mil type are available.
* Wavelength: 385 nm 0.015 mil, Irradiation distance: 10 mm 0.394 in
Based on our company’s measurement standards. Values are typical, but not guaranteed.
Water cooling equipment is not required since
the unit is fan-cooled.
Compact equipment makes installation easy.
Air cooling method
Note: The intensity profiles shown are
representative values, not guaranteed values.
■
Illumination profile (Example)
Height
142 mm
5.591 in
Length
159
to
549 mm 6.260
to
21.614 in
Width
50 mm
1.969 in
Multiple Size Variations
Why is the UV intensity high?
Reason 1 Reason 2
Six sizes are available for use in various applications.
The LED’s capabilities are maximized by its
cooling structure and a small size was also
achieved.
It has high light density due to its optical design.
Further, it also enables long distance irradiation.
Compact Size Makes
Installation Easier
This compact equipment can be installed in a small space.
Provides greater flexibility in choosing the installation
location
Conventional product UD40
Built-in
temperature
sensor
Irradiation
control Parallel I/O
PLC
Block-level UV intensity control
Control UV irradiation from an external device.
UV irradiation can be applied only during the
required time period.
External Access ControlUV Irradiation Stability
Generally, an increase in LED temperature reduces the UV
irradiation output. However, the UD40 series employs a
Panasonic original head cooling mechanism to suppress
temperature increases. Further, a temperature sensor is built
into the head to constantly monitor and feed back temperature
information. This has resulted in a superb UV irradiation
stability within ±5 % for output up to 80 %. This is ideal for high
quality, precise adhesion applications.
UV irradiation can be controlled separately for each
block in the head. This enables UV irradiation according
to the workpiece shape and also reduces power
consumption by turning off the LEDs where UV
irradiation is not needed.
No more resin curing defects or adhesion errors
■Typical characteristics (25 ºC 77 ºF atmosphere)
■UV irradiation pattern example (6 blocks)
Flexible UV Irradiation Patterns
Temperature feedback control
Provides UV irradiation accuracy within ±5 %.
(at 80 % UV intensity setting)
Dual head irradiation
Transverse direction (Number of blocks: 3,
wavelength: 385 nm 0.015 mil)
Longitudinal direction (Number of blocks: 3,
wavelength: 385 nm 0.015 mil)
0− 2
− 0.079
− 4
− 0.157
− 6
− 0.236
− 8
− 0.315
− 10
− 0.394
− 12
− 0.472
− 14
− 0.551
2
0.079
4
0.157
6
0.236
8
0.315
10
0.394
12
0.472
14
0.551
0− 20
− 0.787
− 40
− 1.575
− 60
− 2.362
− 80
− 3.150
− 100
− 3.937
− 140
− 5.512
− 120
− 4.724
− 160
− 6.299
20
0.787
40
1.575
60
2.362
80
3.150
100
3.937
120
4.724
160
6.299
140
5.512
Irradiation area (mm in)
0
1,000
2,000
3,000
4,000
5,000
UV intensity (mW/cm2)
WD=10
WD=20
WD=30
WD=50
0
1,000
2,000
3,000
4,000
5,000
Irradiation area (mm in)
UV intensity (mW/cm2)
WD=10
WD=20
WD=30
WD=50
* WD: Irradiation distance (mm in)* WD: Irradiation distance (mm in)
Cooling structure
UV irradiation during the required time period
t sec.
UV irradiation from the head can be controlled using a parallel
signal from a PLC or other external device.
Note: From detection of external signal ON, up to about 500 msec is required for
UV illumination to reach the set value (necessary for overcurrent protection).
Panasonic’s
original
Type A
On On On On On On
Type B
Off On On On On Off
Power consumption
reduction
Power consumption
reduction
At 100 % setting
At 90 % setting
At 80 % setting
60
65
70
75
80
85
90
95
100
105
0 5 10 15 20 25 30 35 40
Continuous lighting time (minutes)
Note: An output setting of 100 % is indicated as 100.
External signal
UV
UV intensity(%) (Note)
UV irradiation continues during the time period
(t sec.) that the external signal is on. UV
irradiation stops when the signal is turned off.
13
12
Aicure UD40
Aicure UD40
Panasonic original LED provides a
UV intensity* of 4,600 mW/cm2.
The wavelength 365 nm 0.014 mil type and 385 nm
0.015 mil type are available.
* Wavelength: 385 nm 0.015 mil, Irradiation distance: 10 mm 0.394 in
Based on our company’s measurement standards. Values are typical, but not guaranteed.
Water cooling equipment is not required since
the unit is fan-cooled.
Compact equipment makes installation easy.
Air cooling method
Note: The intensity profiles shown are
representative values, not guaranteed values.
■
Illumination profile (Example)
Height
142 mm
5.591 in
Length
159
to
549 mm 6.260
to
21.614 in
Width
50 mm
1.969 in
Multiple Size Variations
Why is the UV intensity high?
Reason 1 Reason 2
Six sizes are available for use in various applications.
The LED’s capabilities are maximized by its
cooling structure and a small size was also
achieved.
It has high light density due to its optical design.
Further, it also enables long distance irradiation.
Compact Size Makes
Installation Easier
This compact equipment can be installed in a small space.
Provides greater flexibility in choosing the installation
location
Conventional product UD40
Built-in
temperature
sensor
Irradiation
control Parallel I/O
PLC
Block-level UV intensity control
Control UV irradiation from an external device.
UV irradiation can be applied only during the
required time period.
External Access ControlUV Irradiation Stability
Generally, an increase in LED temperature reduces the UV
irradiation output. However, the UD40 series employs a
Panasonic original head cooling mechanism to suppress
temperature increases. Further, a temperature sensor is built
into the head to constantly monitor and feed back temperature
information. This has resulted in a superb UV irradiation
stability within ±5 % for output up to 80 %. This is ideal for high
quality, precise adhesion applications.
UV irradiation can be controlled separately for each
block in the head. This enables UV irradiation according
to the workpiece shape and also reduces power
consumption by turning off the LEDs where UV
irradiation is not needed.
No more resin curing defects or adhesion errors
■Typical characteristics (25 ºC 77 ºF atmosphere)
■UV irradiation pattern example (6 blocks)
Flexible UV Irradiation Patterns
Temperature feedback control
Provides UV irradiation accuracy within ±5 %.
(at 80 % UV intensity setting)
Dual head irradiation
Transverse direction (Number of blocks: 3,
wavelength: 385 nm 0.015 mil)
Longitudinal direction (Number of blocks: 3,
wavelength: 385 nm 0.015 mil)
0− 2
− 0.079
− 4
− 0.157
− 6
− 0.236
− 8
− 0.315
− 10
− 0.394
− 12
− 0.472
− 14
− 0.551
2
0.079
4
0.157
6
0.236
8
0.315
10
0.394
12
0.472
14
0.551
0− 20
− 0.787
− 40
− 1.575
− 60
− 2.362
− 80
− 3.150
− 100
− 3.937
− 140
− 5.512
− 120
− 4.724
− 160
− 6.299
20
0.787
40
1.575
60
2.362
80
3.150
100
3.937
120
4.724
160
6.299
140
5.512
Irradiation area (mm in)
0
1,000
2,000
3,000
4,000
5,000
UV intensity (mW/cm2)
WD=10
WD=20
WD=30
WD=50
0
1,000
2,000
3,000
4,000
5,000
Irradiation area (mm in)
UV intensity (mW/cm2)
WD=10
WD=20
WD=30
WD=50
* WD: Irradiation distance (mm in)* WD: Irradiation distance (mm in)
Cooling structure
UV irradiation during the required time period
t sec.
UV irradiation from the head can be controlled using a parallel
signal from a PLC or other external device.
Note: From detection of external signal ON, up to about 500 msec is required for
UV illumination to reach the set value (necessary for overcurrent protection).
Panasonic’s
original
Type A
On On On On On On
Type B
Off On On On On Off
Power consumption
reduction
Power consumption
reduction
At 100 % setting
At 90 % setting
At 80 % setting
60
65
70
75
80
85
90
95
100
105
0 5 10 15 20 25 30 35 40
Continuous lighting time (minutes)
Note: An output setting of 100 % is indicated as 100.
External signal
UV
UV intensity(%) (Note)
UV irradiation continues during the time period
(t sec.) that the external signal is on. UV
irradiation stops when the signal is turned off.
15
14
Aicure UD40
Aicure UD40
Operating Time and Temperature Display Functions
The LED type features extremely long light-source life span
compared to the lamp type. As compared to the estimated
lamp life span of 1,500 hours (Note 1), the estimated LED life
span is 15,000 hours (Note 2).
Furthermore, unlike the lamp type that remains on at all times,
the LED type can be turned on only when UV irradiation is
needed. If the irradiation on/off time ratio is 1:4 (process takt
time = 5, irradiation time = 1), this calculates to a life span of
approximately 75,000 hours (Note 2), which can drastically
reduce running cost and maintenance man-hours.
LED type makes frequent replacement
of service parts unnecessary.
Notification of LED replacement period
and abnormal temperature
Notes: 1) Our straight tube type
2) At an ambient operating temperature of +25 ºC +77 º F
Reduces running cost and CO2
Long-life, Economical LED Type
Low Power Consumption
at 100 W per LED Block
Even when six blocks in a single head are turned on, the
maximum power consumption is 650 W (at 200 V AC). This
effectively reduces power consumption and CO2 emission.
Since less heat is generated than the lamp type, even when
the system is used in a small clean room, the increase in room
temperature is small. This reduces the power needed for air
conditioning.
Eco product compliant with
CE, RoHS, etc.
Unlike lamp type, LED type heads do not contain mercury.
UD40 conform to CE Marking, RoHS Directive, and
Management Methods for Controlling Pollution by Electronic
Information Products (China RoHS), ensuring environmentally
safe use. (Please follow the proper industrial waste disposal
procedures.)
The number of hours of lighting is counted for each LED block
in the head. When a specific number of hours is reached, the
LED replacement period is indicated through the controller’s
external output and panel display. In addition, because the
head has a built-in temperature sensor, the LED temperature
during operation can be displayed. If an abnormal temperature
is detected, the controller sends a warning through its external
output and panel display. These functions ensure safety and
improve productivity.
Switching from lamp type
Proposal
●
High UV intensity
●
Long distance irradiation is also possible
●
Improvement in UV intensity uniformity
UD40 UD40
Long term light source
Exhaust air duct not required
Power savingSpace-saving
Switching from spot type connection style to line type
UV intensity distribution of spot type
(Typical example)
UV intensity distribution of line type
(Typical example)
Product Components
With single head With dual head
■Number of head blocks: 1 to 3 ■Number of head blocks: 4 to 6
With dual head
■
Number of blocks in head 1: 1 to 3, number of blocks in head 2: 4 to 6
■
Number of blocks in head 1: 4 to 6, number of blocks in head 2: 1 to 3
■Number of blocks in head 1: 4 to 6, number of blocks in head 2: 4 to 6
·Head
·Controller
Control unit Power unit
·Head
·Controller
Control unit Power unit × 2
■
Number of blocks in head 1: 1 to 3, number of blocks in head 2: 1 to 3
·Head
·Controller
Control unit Power unit × 2
·Head
·Controller
Control unit Power unit × 4
·Head
·Controller
Control unit Power unit × 3
10 times
50 times
Lamp type
continuous lighting
LED type
continuous lighting
LED type
ON / OFF control
Approx. 75,000
hours (Note 2)
Approx. 15,000
hours (Note 2)
Approx. 1,500
hours (Note 1)
OFF
OFF
ON
ON
ON
ON
ON
ON
OFF
OFF
UD40 (No. of blocks: 2, wavelength: 365 nm
0.014 mil, irradiation distance 30 mm 1.181 in)
ANUJ6180 (standard type) + ANUJ6450S
(wavelength: 365 nm 0.014 mil, irradiation distance
20 mm 0.787 in)
0 2,500
0 2,500
(mW/cm
2
) (mW/cm
2
)
UD40
(Number of blocks: 2, wavelength: 365 nm
0.014 mil, Irradiation distance: 30 mm 1.181 in)
15
14
Aicure UD40
Aicure UD40
Operating Time and Temperature Display Functions
The LED type features extremely long light-source life span
compared to the lamp type. As compared to the estimated
lamp life span of 1,500 hours (Note 1), the estimated LED life
span is 15,000 hours (Note 2).
Furthermore, unlike the lamp type that remains on at all times,
the LED type can be turned on only when UV irradiation is
needed. If the irradiation on/off time ratio is 1:4 (process takt
time = 5, irradiation time = 1), this calculates to a life span of
approximately 75,000 hours (Note 2), which can drastically
reduce running cost and maintenance man-hours.
LED type makes frequent replacement
of service parts unnecessary.
Notification of LED replacement period
and abnormal temperature
Notes: 1) Our straight tube type
2) At an ambient operating temperature of +25 ºC +77 º F
Reduces running cost and CO2
Long-life, Economical LED Type
Low Power Consumption
at 100 W per LED Block
Even when six blocks in a single head are turned on, the
maximum power consumption is 650 W (at 200 V AC). This
effectively reduces power consumption and CO2 emission.
Since less heat is generated than the lamp type, even when
the system is used in a small clean room, the increase in room
temperature is small. This reduces the power needed for air
conditioning.
Eco product compliant with
CE, RoHS, etc.
Unlike lamp type, LED type heads do not contain mercury.
UD40 conform to CE Marking, RoHS Directive, and
Management Methods for Controlling Pollution by Electronic
Information Products (China RoHS), ensuring environmentally
safe use. (Please follow the proper industrial waste disposal
procedures.)
The number of hours of lighting is counted for each LED block
in the head. When a specific number of hours is reached, the
LED replacement period is indicated through the controller’s
external output and panel display. In addition, because the
head has a built-in temperature sensor, the LED temperature
during operation can be displayed. If an abnormal temperature
is detected, the controller sends a warning through its external
output and panel display. These functions ensure safety and
improve productivity.
Switching from lamp type
Proposal
●
High UV intensity
●
Long distance irradiation is also possible
●
Improvement in UV intensity uniformity
UD40 UD40
Long term light source
Exhaust air duct not required
Power savingSpace-saving
Switching from spot type connection style to line type
UV intensity distribution of spot type
(Typical example)
UV intensity distribution of line type
(Typical example)
Product Components
With single head With dual head
■Number of head blocks: 1 to 3 ■Number of head blocks: 4 to 6
With dual head
■
Number of blocks in head 1: 1 to 3, number of blocks in head 2: 4 to 6
■
Number of blocks in head 1: 4 to 6, number of blocks in head 2: 1 to 3
■Number of blocks in head 1: 4 to 6, number of blocks in head 2: 4 to 6
·Head
·Controller
Control unit Power unit
·Head
·Controller
Control unit Power unit × 2
■
Number of blocks in head 1: 1 to 3, number of blocks in head 2: 1 to 3
·Head
·Controller
Control unit Power unit × 2
·Head
·Controller
Control unit Power unit × 4
·Head
·Controller
Control unit Power unit × 3
10 times
50 times
Lamp type
continuous lighting
LED type
continuous lighting
LED type
ON / OFF control
Approx. 75,000
hours (Note 2)
Approx. 15,000
hours (Note 2)
Approx. 1,500
hours (Note 1)
OFF
OFF
ON
ON
ON
ON
ON
ON
OFF
OFF
UD40 (No. of blocks: 2, wavelength: 365 nm
0.014 mil, irradiation distance 30 mm 1.181 in)
ANUJ6180 (standard type) + ANUJ6450S
(wavelength: 365 nm 0.014 mil, irradiation distance
20 mm 0.787 in)
0 2,5000 2,500
(mW/cm
2
) (mW/cm
2
)
UD40
(Number of blocks: 2, wavelength: 365 nm
0.014 mil, Irradiation distance: 30 mm 1.181 in)
ANUD4S□
Input supply voltage 1ø 200 to 240 V AC
Input supply frequency 50 to 60 Hz
AC inlet Terminal block (terminal block screw diameter: ø4 mm ø0.016 in) (Note 1)
No. of irradiation program patterns 32 patterns (Note 2)
Display, setting, operation Display, setting, operation from the touch screen
External
control
Type Parallel I/O (D-Sub37 (Note 3))
External input LED lighting, program selection, LED block individual lighting, local or remote selection, external emergency stop
External output Equipment power ON, irradiation preparation complete, irradiating, alert, error, main unit emergency stop
Dimming control (Note 2) 50 to 100 % (in increments of 1 %)
LED temperature feedback A function that senses the temperature of the LED head section and maintains constant UV intensity
Ambient operating temperature /
ambient operating humidity 0 to +35 ºC +32 to +95 ºF / 30 to 85 % RH (no dew condensation or icing allowed)
Storage temperature / storage humidity
-10 to +60 ºC +14 to +140 ºF / 30 to 85 % RH (no dew condensation or icing allowed)
Cooling method Control unit: Fan-less natural air cooling, Power unit: Fan-forced air cooling
Configuration Separation of control unit equipped with PLC and power supply for LED lighting
Outer finishing Matte black painting
Accessories Control unit Power key, D-Sub37 connector
Power unit Signal cable (1 m 3.281 ft), AC connection cable (1 m 3.281 ft), LED head connection cable (5 m 16.404 ft)
Notes: 1) Prepare a separate power supply cable (AC supply cable) with a diameter appropriate for the maximum input current.
2) Setting from the touch screen.
3) Prepare a separate cable for connecting to the D-Sub37 connector.
Controller part No.
Item
Wavelength: 365 nm 0.014 mil
ANUD4A111 ANUD4A211 ANUD4A311 ANUD4A411 ANUD4A511 ANUD4A611
Wavelength: 385 nm 0.015 mil
ANUD4B111 ANUD4B211 ANUD4B311 ANUD4B411 ANUD4B511 ANUD4B611
Number of blocks 123456
Light source 365 nm ±10 nm 0.014 mil ±0.0004 mil / 385 nm ±10 nm 0.015 mil ±0.0004 mil
Peak irradiation intensity
Initial guaranteed value (Note 1)
Irradiation distance: 10 mm 0.394 in
2,100 mW/cm2 (Wavelength: 365 nm 0.014 mil) / 2,500 mW/cm2 (Wavelength: 385 nm 0.015 mil)
Irradiation distance: 30 mm 1.181 in
1,100 mW/cm2 (Wavelength: 365 nm 0.014 mil) / 1,400 mW/cm2 (Wavelength: 385 nm 0.015 mil)
Peak irradiation intensity
Typical value (Note 2)
Irradiation distance: 10 mm 0.394 in
4,200 mW/cm2 (Wavelength: 365 nm 0.014 mil) / 4,600 mW/cm2 (Wavelength: 385 nm 0.015 mil)
Irradiation distance: 30 mm 1.181 in
2,300 mW/cm2 (Wavelength: 365 nm 0.014 mil) / 2,600 mW/cm2 (Wavelength: 385 nm 0.015 mil)
Effective irradiation
width (Note 2)
Irradiation distance: 10 mm 0.394 in
36 mm 1.417 in 108 mm 4.252 in 180 mm 7.087 in 252 mm 9.921 in 324 mm 12.756 in 396 mm 15.591 in
Irradiation distance: 30 mm 1.181 in
16 mm 0.630 in 88 mm 3.465 in 160 mm 6.299 in 232 mm 9.134 in 304 mm 11.968 in 376 mm 14.803 in
Estimated head life expectancy (Note 2)
15,000 hours (70 % for initial UV intensity)
Ambient operating temperature /
ambient operating humidity 0 to +35 ºC +32 to +95 ºF / 30 to 85 % RH (no dew condensation or icing allowed)
Storage temperature / storage humidity
-10 to +60 ºC +14 to +140 ºF / 30 to 85 % RH (no dew condensation or icing allowed)
Cooling method Fan-forced air cooling
Outer finishing Matte black painting
Accessories Power supply wiring connector *Connection cable not supplied. If only a head is purchased, please also prepare a
constant-current power supply for the LED, a constant-voltage power supply for the fan and connection cable, etc.
Notes: 1) Based on our company’s measurement standards. Values are initial guaranteed values, but not representative values.
2) Based on our company’s measurement standards. Values are typical, but not guaranteed.
Head part No.
Item
Specications
Common controller specications
Common head specications
17
16
Aicure UD40
Aicure UD40
Specications
Individual specications
Number of blocks 123456
Head part No.
Wavelength: 365 nm
0.014 mil
ANUD4A111 ANUD4A211 ANUD4A311 ANUD4A411 ANUD4A511 ANUD4A611
Wavelength: 385 nm
0.015 mil
ANUD4B111 ANUD4B211 ANUD4B311 ANUD4B411 ANUD4B511 ANUD4B611
Controller part No. ANUD4S10 ANUD4S20 ANUD4S30 ANUD4S40 ANUD4S50 ANUD4S60
No. of control units 1
No. of power units 1 2
Maximum input current 1 A 2 A 3 A 4 A 5 A 6 A
Maximum power consumption 150 W 250 W 350 W 450 W 550 W 650 W
Weight (Note)
Head 1.3 kg approx. 1.8 kg approx. 2.3 kg approx. 3.0 kg approx. 3.5 kg approx. 4.0 kg approx.
Control unit 10 kg approx.
Power unit-1 10 kg approx. 12 kg approx. 14 kg approx.
Power unit-2
-
10 kg approx. 12 kg approx. 14 kg approx.
Note: Excluding connectors and cables.
Number of blocks (Head 1)
123456
Number of blocks (Head 2)
1
Controller part No. ANUD4S11 ANUD4S21 ANUD4S31 ANUD4S41 ANUD4S51 ANUD4S61
No. of control units 1
No. of power units 2 3
Maximum input current
2 A 3 A 4 A 5 A 6 A 7 A
Maximum power consumption
250 W 350 W 450 W 550 W 650 W 750 W
Weight (Note)
Head 1 1.3 kg approx. 1.8 kg approx. 2.3 kg approx. 3.0 kg approx. 3.5 kg approx. 4.0 kg approx.
Head 2 1.3 kg approx.
Control unit
10 kg approx.
Power unit-1
10 kg approx. 12 kg approx. 14 kg approx.
Power unit-2
-
10 kg approx. 12 kg approx. 14 kg approx.
Power unit-3
10 kg approx.
2
Controller part No. ANUD4S12 ANUD4S22 ANUD4S32 ANUD4S42 ANUD4S52 ANUD4S62
No. of control units 1
No. of power units 2 3
Maximum input current
3 A 4 A 5 A 6 A 7 A 8 A
Maximum power consumption
350 W 450 W 550 W 650 W 750 W 850 W
Weight (Note)
Head 1 1.3 kg approx. 1.8 kg approx. 2.3 kg approx. 3.0 kg approx. 3.5 kg approx. 4.0 kg approx.
Head 2 1.8 kg approx.
Control unit
10 kg approx.
Power unit-1
10 kg approx. 12 kg approx. 14 kg approx.
Power unit-2
-
10 kg approx. 12 kg approx. 14 kg approx.
Power unit-3
12 kg approx.
3
Controller part No. ANUD4S13 ANUD4S23 ANUD4S33 ANUD4S43 ANUD4S53 ANUD4S63
No. of control units 1
No. of power units 2 3
Maximum input current
4 A 5 A 6 A 7 A 8 A 9 A
Maximum power consumption
450 W 550 W 650 W 750 W 850 W 950 W
Weight (Note)
Head 1 1.3 kg approx. 1.8 kg approx. 2.3 kg approx. 3.0 kg approx. 3.5 kg approx. 4.0 kg approx.
Head 2 2.3 kg approx.
Control unit
10 kg approx.
Power unit-1
10 kg approx. 12 kg approx. 14 kg approx.
Power unit-2
-
10 kg approx. 12 kg approx. 14 kg approx.
Power unit-3
14 kg approx.
Note: Excluding connectors and cables.
With single head
With dual head (Combinations of [1 to 6 blocks in Head 1] and [1 to 3 blocks in Head 2])
17
16
Aicure UD40
Aicure UD40
Specications
Individual specications
Number of blocks (Head 1)
123456
Number of blocks (Head 2)
4
Controller part No. ANUD4S14 ANUD4S24 ANUD4S34 ANUD4S44 ANUD4S54 ANUD4S64
No. of control units 1
No. of power units 3 4
Maximum input current
5 A 6 A 7 A 8 A 9 A 10 A
Maximum power consumption
550 W 650 W 750 W 850 W 950 W 1,050 W
Weight (Note)
Head 1 1.3 kg approx. 1.8 kg approx. 2.3 kg approx. 3.0 kg approx. 3.5 kg approx. 4.0 kg approx.
Head 2 3.0 kg approx.
Control unit
10 kg approx.
Power unit-1
10 kg approx. 12 kg approx. 14 kg approx.
Power unit-2
-
10 kg approx. 12 kg approx. 14 kg approx.
Power unit-3
14 kg approx.
Power unit-4
10 kg approx.
5
Controller part No. ANUD4S15 ANUD4S25 ANUD4S35 ANUD4S45 ANUD4S55 ANUD4S65
No. of control units 1
No. of power units 3 4
Maximum input current
6 A 7 A 8 A 9 A 10 A 11 A
Maximum power consumption
650 W 750 W 850 W 950 W 1,050 W 1,150 W
Weight (Note)
Head 1 1.3 kg approx. 1.8 kg approx. 2.3 kg approx. 3.0 kg approx. 3.5 kg approx. 4.0 kg approx.
Head 2 3.5 kg approx.
Control unit
10 kg approx.
Power unit-1
10 kg approx. 12 kg approx. 14 kg approx.
Power unit-2
-
10 kg approx. 12 kg approx. 14 kg approx.
Power unit-3
14 kg approx.
Power unit-4
12 kg approx.
6
Controller part No. ANUD4S16 ANUD4S26 ANUD4S36 ANUD4S46 ANUD4S56 ANUD4S66
No. of control units 1
No. of power units 3 4
Maximum input current
7 A 8 A 9 A 10 A 11 A 12 A
Maximum power consumption
750 W 850 W 950 W 1,050 W 1,150 W 1,250 W
Weight (Note)
Head 1 1.3 kg approx. 1.8 kg approx. 2.3 kg approx. 3.0 kg approx. 3.5 kg approx. 4.0 kg approx.
Head 2 4.0 kg approx.
Control unit
10 kg approx.
Power unit-1
10 kg approx. 12 kg approx. 14 kg approx.
Power unit-2
-
10 kg approx. 12 kg approx. 14 kg approx.
Power unit-3
14 kg approx.
Power unit-4
14 kg approx.
Note: Excluding connectors and cables.
With dual head (Combinations of [1 to 6 blocks in Head 1] and [4 to 6 blocks in Head 2])
19
18
Aicure UD40
Aicure UD40
Dimensions (Unit: mm in)
Heads
ANUD4A□ ANUD4B□
F.G. M4 depth 5.5 0.217
34
1.339
6
0.236
30
1.181
Exhaust fan
(Opposite side is identical)
Irradiation
distance
A
(201)
(7.913)
(274)
(10.787)
15
0.591
32.5
1,280
(10)
(0.394) B
(132)
(5.197 )
128
5.039
77
3.031
Natural air intake
Connector
Nanaboshi Electric Mfg. Co., Ltd.
NJW-2824-PF16
(10)
(0.394) B
20
0.787
15
0.591
(50)
(1.969)
25
0.984
77
3.031
UV emitting window
30
1.181
10
0.394
(48)
(1.890)
42
1.654
40
1.575
4 × M4 depth 6 0.236
50
1.969
(Opposite side is identical)
(Opposite side
is identical)
Irradiation
distance
(201)
(7.913)
(274)
(10.787)
(132)
(5.197)
128
5.039
15
0.591
32.5
1.280
(10)
(0.394) B
107
4.213
A
Natural air intake
Connector
Nanaboshi Electric Mfg. Co., Ltd.
NJW-2824-PF16
Connector
Nanaboshi Electric Mfg. Co., Ltd.
NJW-2824-PFX16
50
1.969
(48)
(1.890)
30
1.181
10
0.394
42
1.654
40
1.575
4 × M4 depth 6 0.236
(for installation)
(Opposite side is identical)
53.5
2.10 6
31
1.220
45
1.772
F.G. M4 depth 5.5 0.217
7
0.276
Exhaust fan
B
107
4.213
(50)
(1.969)
25
0.984
15
0.591
(10)
(0.394)
20
0.787
UV emitting window
■Number of blocks: 1 to 3
■Number of blocks: 4 to 6
Head
Part No.
Wavelength: 365 nm 0.014 mil
ANUD4A411 ANUD4A511 ANUD4A611
Wavelength: 385 nm 0.015 mil
ANUD4B411 ANUD4B511 ANUD4B611
Number of blocks 456
Eective
irradiation
width
Irradiation distance: 10 mm 0.394 in
252 9.921 324 12.756 396 15.591
Irradiation distance: 30 mm 1.181 in
232 9.134 304 11.968 376 14.803
External
dimensions
Width 50 1.969
Height (142 5.591)
(with receptacle, without connector and cable)
A (Length) 405 15.945 477 18.779 549 21.614
B 288 11.339 360 14.173 432 17.008
Head
Part No.
Wavelength: 365 nm 0.014 mil
ANUD4A111 ANUD4A211 ANUD4A311
Wavelength: 385 nm 0.015 mil
ANUD4B111 ANUD4B211 ANUD4B311
Number of blocks 123
Eective
irradiation
width
Irradiation distance: 10 mm 0.394 in
36 1.417 108 4.252 180 7.087
Irradiation distance: 30 mm 1.181 in
16 0.630 88 3.465 160 6.299
External
dimensions
Width 50 1.969
Height (142 5.591)
(with receptacle, without connector and cable)
A (Length) 159 6.260 231 9.094 303 11.929
B 72 2.835 144 5.669 216 8.504
19
18
Aicure UD40
Aicure UD40
Dimensions (Unit: mm in)
ANUD4S□ Controllers
280
11.024
(223)
(8.780)
21
0.827
202
7.953
(22)
(0.866)
(236)
(9.291)
(22)
(0.866)
Radiation switch / Radiation light
Emergency stop switch
Touch screen
Key switch
Circuit breaker
Pilot light (Head 1)
(Head 2)
Power unit communication conector 2 (Note)
Power unit communication
conector 1
(Note)
Power unit communication
conector 3
(Note)
Power unit communication conector 4 (Note)
AC supply connector 1
External I/O connector
AC power receiving
terminal block
AC supply connector 2
105
4.134
131
5.157
56 2.205
45
1.772
190
7.480
81 3.190
240
9.449
(22)
(0.866)
(30)
(1.181)
(428)
(16.850)
498
19.606
(115)
(4.528)
(40)
(1.575)
(40)
(1.575)
280
11.024
(301)
(11.850)
21
0.827 280
11.024
(22)
(0.866)
(236)
(9.291)
(22)
(0.866)
Natural air intake
180
7.087
(30)
(1.181)
326
12.835
(256)
(10.079)
(40)
(1.575)
Power supply
communication connector
AC power
receiving connector
Exhaust fan
LED head connection
connector
AC power transmission
connector
(Note)
106
4.173
150
5.910
140
5.512
100
3.937
180
7.087
60
2.362
225
8.858
■Control unit
■Power unit
Power unit communication connector availability chart
AC power transmission connector availability chart
-
: Power unit not available
Controller part No.
ANUD4S10 ANUD4S40 ANUD4S11 ANUD4S14 ANUD4S41 ANUD4S44
ANUD4S20 ANUD4S50 ANUD4S12 ANUD4S15 ANUD4S42 ANUD4S45
ANUD4S30 ANUD4S60 ANUD4S13 ANUD4S16 ANUD4S43 ANUD4S46
Power unit comminucation
connector
ANUD4S21 ANUD4S24 ANUD4S51 ANUD4S54
ANUD4S22 ANUD4S25 ANUD4S52 ANUD4S55
ANUD4S23 ANUD4S26 ANUD4S53 ANUD4S56
ANUD4S31 ANUD4S34 ANUD4S61 ANUD4S64
ANUD4S32 ANUD4S35 ANUD4S62 ANUD4S65
ANUD4S33 ANUD4S36 ANUD4S63 ANUD4S66
No. of power units 122334
Power unit comminucation
connector 1 Available Available Available Available Available Available
Power unit comminucation
connector 2 None Available None None Available Available
Power unit comminucation
connector 3 None None Available Available Available Available
Power unit comminucation
connector 4 None None None Available None Available
Controller part No.
ANUD4S10 ANUD4S40 ANUD4S11 ANUD4S14 ANUD4S41 ANUD4S44
ANUD4S20 ANUD4S50 ANUD4S12 ANUD4S15 ANUD4S42 ANUD4S45
ANUD4S30 ANUD4S60 ANUD4S13 ANUD4S16 ANUD4S43 ANUD4S46
AC transmission connector
used / not used
ANUD4S21 ANUD4S24 ANUD4S51 ANUD4S54
ANUD4S22 ANUD4S25 ANUD4S52 ANUD4S55
ANUD4S23 ANUD4S26 ANUD4S53 ANUD4S56
ANUD4S31 ANUD4S34 ANUD4S61 ANUD4S64
ANUD4S32 ANUD4S35 ANUD4S62 ANUD4S65
ANUD4S33 ANUD4S36 ANUD4S63 ANUD4S66
No. of power units 122334
Power unit-1 None Available None None Available Available
Power unit-2
-
None
- -
None None
Power unit-3
- -
None Available None Available
Power unit-4
-- -
None
-
None
Note: The position and number of power unit communication
connectors depend on the number of connected power units.
See the chart on the right for the corresponding models.
(Figure above shows an example of using 4 power units)
Note: Whether an AC transmission connector is used depends on
the controller model. See the chart on the right for
information on which models use AC transmission
connectors.
(Figure above shows an example of using an AC
transmission connector)
21
20
Aicure UP50
Aicure UP50
Shutter
UV irradiation
Setting
External signal
Input
Output
Dimensions
Weight
Note: Please refer to page 22 for the light guide fiber units and other optional parts.
UP50
Part No.
Power supply
Lamp
Accessories
Ambient temperature /
ambient humidity
ANUP50
90 to 264 V AC 50 / 60 Hz 280 VA
ANUPS204
200 W mercury xenon lamp, preset quickly-attachable type
Notes: 1) Average life of 3,000 hours: Ratio to the initial UV intensity --
80% or higher in a vertical position, 70 % or higher in a
horizontal position (when the auto control function is off)
2) Guaranteed life: 2,000 hours
Lamp (ANUPS204)
Power cord (3 m 9.843 ft, 100 V AC compatible, plug with 2-pole ground)
+10 to +40 °C +50 to +104 °F / Max. 80 % RH (no condensation)
Lamp Part No.
Energy-efficient mode will cut
power consumption by
maximum of 15 % when the
irradiation is off. Also featuring
high-accuracy auto-tuning
function
The Eco mode cuts the
standby power consumption by
a maximum of 15 % while the
irradiation is off (the shutter is
closed), contributing to the
running costs (electricity
charge). Compatible with a
wide range of power supply
voltages from 100 to 240 V AC
for worldwide use.
Eco mode reduces power consumption.
High-efficiency UV irradiation
The use of the filter is recommended especially for heat-sensitive workpieces.
You can reduce temperature rises in the irradiation unit by attaching a heat
reflecting filter depending on the type of workpiece.
Typical
characteristics
5 10 15 20 25 300
Irradiation time (sec)
Temperature (°C °F)
Without filter
ANUP5001F
20
25
30
40.9
36.2
105.62
97.16
24.0
35
40
45
68
77
86
95
104
113
• Workpiece: Al (30 × t0.5 mm 1.181 × t0.020 in)
• Distance: 30 mm 1.181 in
• Intensity: 400 W/cm2
• Fiber: ANUP3052 + ANUP50001BS
ANUP5001F heat ray cut filter prevents
temperature rises in the irradiation unit.
Typical
characteristics
Wavelengths (nm)
Relative spectral radiant intensity
200
0
100
300 400 500
The development and adoption of our unique special mirror that allows for the
effective irradiation with short wavelengths enables the quick elimination of
surface stickiness caused during curing. The irradiation time can also be
reduced, decreasing the temperature rise of workpieces.
Surface tackiness can be quickly eliminated.
Power consumption when the UV auto control is on
Power consumption (VA)
Lamp lighting time (H)
280
238
0 1,000 2,000 3,000
When the irradiation is on
(the shutter is opened)
When the irradiation is off
(the shutter is closed)
Cut by
15%
max.
Cut by
10%
Cut by
5%
The UV intensity can be
relative measured (Note 1) at
the actual position by
using the slim UV sensor.
It can also automatically
adjust the UV intensity to
the preset level. Since the
sensor only has 5 mm
(0.197 in) thickness,
which is similar to the
workpiece, the intensity
measurement is possible
without removing the
system from the
production line, facilitating
high-accuracy setting and in-line condition optimization. The UV intensity can
be checked and adjusted at real time, enhancing the bonding and
fixing reliability.
5 mm
0.197 in
This function increases the electrical power applied to the lamp according to
the total irradiation time of the lamp to compensate for the UV intensity
decrease, maintaining stable UV irradiation until the end of the lamp life.
UV auto control function automatically
compensates for the UV intensity
Typical
characteristics
0
0
20
40
H-ON
Lamp lighting time (H)
Relative intensity
H-OFF
V-ON
V-OFF
60
80
100
1,000 2,000 3,000
V-ON: Vertically installed and auto control is on.
V-OFF: Vertically installed and auto control is off.
H-ON: Horizontally installed and auto control is on.
H-OFF: Horizontally installed and auto control is off.
Stable UV irradiation performance
Panasonic's
original
Significantly higher reliability for bonding and fixing
Slim UV sensor
The UV sensor for measuring irradiation intensity enables
auto-turning in high-accuracy.
Notes: 1) UV intensity can be measured as a relative value.
2) Because sensitivity adjustment of the UV sensor is carried out at 365 nm single wavelength,
depending on the spectral sensitivity characteristics of the UV resin being used, it may not be
possible to fully control the curing process.
For more information, please consult us.
Specifications
Stable UV irradiation performance
Programmable irradiation function
This function prevents curing distortion and enables high-quality
precision bonding.
Program mode
The irradiation can be programmed to controls the irradiation power and time
depending on the resin and curing appication, supporting high-quality and
high-precision bonding with minimum cure shrinkage. In addition to the simple
irradiation mode which irradiation is continuously performed at a constant
intensity, up to 10 steps 10 patterns can be set. This includes the step-up
mode which the intensity is changed over time and the interval mode which
irradiation is performed at specified intervals.
Time
UV intensity
Pattern 0
Time
Pattern 9
STEP=1
STEP=1
STEP=10
STEP=2
STEP=3
STEP=5
STEP=7
Interval (closed)
Interval (closed)
…
The irradiation power can be finely set in the range of 0 to 100 % in
increments of 0.5 %. The actual UV irradiation intensity is approximately
proportional to the displayed value, making the setting work easier and more
accurate.
Digital setting allows for consistency of set
values from operator to operator.
The wavelength distribution (typical characteristics) of UP50 is identical to
ANUP5204, our existing model. The replacement lamp, the ANUPS204, is
also the same as that for the ANUP5204.
Interchangeability with ANUP5204
Short range
converging lens
AS lens
Long range
converging lens
BS lens
Slim AS and
BS lens units
Light guide fiber
Note: Please refer to pages 22 and 23 for the UV intensity
distribution data.
(Vertical placement)
Easy to install
The unit can be placed in either a vertical
position that makes the footprint smaller
or a horizontal position that allows
stacking other units.
Can be placed either
vertically or horizontally .
The average lamp life is 3,000 hours
(guaranteed life: 2,000 hours (Note)). The
lamp can be easily replaced with a single
operation and does not require an optical
axis adjustment.
Long life, quickly-attachable lamp
Note: Ratio to the initial UV intensity -- 80 % or
higher in vertical placement, 70 % or higher in
horizontal placement
The two lens unit models, one for short range and the other for long range
converging, cover a variety of applications and workpieces.
Two lens unit models for short and long range
converging
Electronically-controlled shutter using manual or timer-controlled operation
UV intensity adjustment by digital setting (0 to 100 %, in increments of
0.5 %)
UV auto control
Programmable irradiation (10 steps in each of 10 patterns)
External signal control: Turning the lamp on/off, manual opening/closing
of the shutter, starting programmed pattern
irradiation, starting timer-controlled irradiation,
and executing calibration
Digital setting using membrane switches
Opening/closing the shutter (timer/manual), lighting the lamp
Lighting the lamp, stabilizing the lamp light, opening the shutter,
outputting error signals, and indicating the lamp life
165 × 201 × 325 mm 6.496 × 7.913 × 12.795 in
(Excluding protruding sections)
8 kg approx.
21
20
Aicure UP50
Aicure UP50
Shutter
UV irradiation
Setting
External signal
Input
Output
Dimensions
Weight
Note: Please refer to page 22 for the light guide fiber units and other optional parts.
UP50
Part No.
Power supply
Lamp
Accessories
Ambient temperature /
ambient humidity
ANUP50
90 to 264 V AC 50 / 60 Hz 280 VA
ANUPS204
200 W mercury xenon lamp, preset quickly-attachable type
Notes: 1) Average life of 3,000 hours: Ratio to the initial UV intensity --
80% or higher in a vertical position, 70 % or higher in a
horizontal position (when the auto control function is off)
2) Guaranteed life: 2,000 hours
Lamp (ANUPS204)
Power cord (3 m 9.843 ft, 100 V AC compatible, plug with 2-pole ground)
+10 to +40 °C +50 to +104 °F / Max. 80 % RH (no condensation)
Lamp Part No.
Energy-efficient mode will cut
power consumption by
maximum of 15 % when the
irradiation is off. Also featuring
high-accuracy auto-tuning
function
The Eco mode cuts the
standby power consumption by
a maximum of 15 % while the
irradiation is off (the shutter is
closed), contributing to the
running costs (electricity
charge). Compatible with a
wide range of power supply
voltages from 100 to 240 V AC
for worldwide use.
Eco mode reduces power consumption.
High-efficiency UV irradiation
The use of the filter is recommended especially for heat-sensitive workpieces.
You can reduce temperature rises in the irradiation unit by attaching a heat
reflecting filter depending on the type of workpiece.
Typical
characteristics
5 10 15 20 25 300
Irradiation time (sec)
Temperature (°C °F)
Without filter
ANUP5001F
20
25
30
40.9
36.2
105.62
97.16
24.0
35
40
45
68
77
86
95
104
113
• Workpiece: Al (30 × t0.5 mm 1.181 × t0.020 in)
• Distance: 30 mm 1.181 in
• Intensity: 400 W/cm2
• Fiber: ANUP3052 + ANUP50001BS
ANUP5001F heat ray cut filter prevents
temperature rises in the irradiation unit.
Typical
characteristics
Wavelengths (nm)
Relative spectral radiant intensity
200
0
100
300 400 500
The development and adoption of our unique special mirror that allows for the
effective irradiation with short wavelengths enables the quick elimination of
surface stickiness caused during curing. The irradiation time can also be
reduced, decreasing the temperature rise of workpieces.
Surface tackiness can be quickly eliminated.
Power consumption when the UV auto control is on
Power consumption (VA)
Lamp lighting time (H)
280
238
0 1,000 2,000 3,000
When the irradiation is on
(the shutter is opened)
When the irradiation is off
(the shutter is closed)
Cut by
15%
max.
Cut by
10%
Cut by
5%
The UV intensity can be
relative measured (Note 1) at
the actual position by
using the slim UV sensor.
It can also automatically
adjust the UV intensity to
the preset level. Since the
sensor only has 5 mm
(0.197 in) thickness,
which is similar to the
workpiece, the intensity
measurement is possible
without removing the
system from the
production line, facilitating
high-accuracy setting and in-line condition optimization. The UV intensity can
be checked and adjusted at real time, enhancing the bonding and
fixing reliability.
5 mm
0.197 in
This function increases the electrical power applied to the lamp according to
the total irradiation time of the lamp to compensate for the UV intensity
decrease, maintaining stable UV irradiation until the end of the lamp life.
UV auto control function automatically
compensates for the UV intensity
Typical
characteristics
0
0
20
40
H-ON
Lamp lighting time (H)
Relative intensity
H-OFF
V-ON
V-OFF
60
80
100
1,000 2,000 3,000
V-ON: Vertically installed and auto control is on.
V-OFF: Vertically installed and auto control is off.
H-ON: Horizontally installed and auto control is on.
H-OFF: Horizontally installed and auto control is off.
Stable UV irradiation performance
Panasonic's
original
Significantly higher reliability for bonding and fixing
Slim UV sensor
The UV sensor for measuring irradiation intensity enables
auto-turning in high-accuracy.
Notes: 1) UV intensity can be measured as a relative value.
2) Because sensitivity adjustment of the UV sensor is carried out at 365 nm single wavelength,
depending on the spectral sensitivity characteristics of the UV resin being used, it may not be
possible to fully control the curing process.
For more information, please consult us.
Specifications
Stable UV irradiation performance
Programmable irradiation function
This function prevents curing distortion and enables high-quality
precision bonding.
Program mode
The irradiation can be programmed to controls the irradiation power and time
depending on the resin and curing appication, supporting high-quality and
high-precision bonding with minimum cure shrinkage. In addition to the simple
irradiation mode which irradiation is continuously performed at a constant
intensity, up to 10 steps 10 patterns can be set. This includes the step-up
mode which the intensity is changed over time and the interval mode which
irradiation is performed at specified intervals.
Time
UV intensity
Pattern 0
Time
Pattern 9
STEP=1
STEP=1
STEP=10
STEP=2
STEP=3
STEP=5
STEP=7
Interval (closed)
Interval (closed)
…
The irradiation power can be finely set in the range of 0 to 100 % in
increments of 0.5 %. The actual UV irradiation intensity is approximately
proportional to the displayed value, making the setting work easier and more
accurate.
Digital setting allows for consistency of set
values from operator to operator.
The wavelength distribution (typical characteristics) of UP50 is identical to
ANUP5204, our existing model. The replacement lamp, the ANUPS204, is
also the same as that for the ANUP5204.
Interchangeability with ANUP5204
Short range
converging lens
AS lens
Long range
converging lens
BS lens
Slim AS and
BS lens units
Light guide fiber
Note: Please refer to pages 22 and 23 for the UV intensity
distribution data.
(Vertical placement)
Easy to install
The unit can be placed in either a vertical
position that makes the footprint smaller
or a horizontal position that allows
stacking other units.
Can be placed either
vertically or horizontally .
The average lamp life is 3,000 hours
(guaranteed life: 2,000 hours (Note)). The
lamp can be easily replaced with a single
operation and does not require an optical
axis adjustment.
Long life, quickly-attachable lamp
Note: Ratio to the initial UV intensity -- 80 % or
higher in vertical placement, 70 % or higher in
horizontal placement
The two lens unit models, one for short range and the other for long range
converging, cover a variety of applications and workpieces.
Two lens unit models for short and long range
converging
Electronically-controlled shutter using manual or timer-controlled operation
UV intensity adjustment by digital setting (0 to 100 %, in increments of
0.5 %)
UV auto control
Programmable irradiation (10 steps in each of 10 patterns)
External signal control: Turning the lamp on/off, manual opening/closing
of the shutter, starting programmed pattern
irradiation, starting timer-controlled irradiation,
and executing calibration
Digital setting using membrane switches
Opening/closing the shutter (timer/manual), lighting the lamp
Lighting the lamp, stabilizing the lamp light, opening the shutter,
outputting error signals, and indicating the lamp life
165 × 201 × 325 mm 6.496 × 7.913 × 12.795 in
(Excluding protruding sections)
8 kg approx.
80 mm 3.150 in
100 mm 3.937 in
80 mm 3.150 in
100 mm 3.937 in
5 mm 0.197 in
10 mm 0.394 in
20 mm 0.787 in
15 mm 0.591 in
25 mm 0.984 in
30 mm 1.181 in
40 mm 1.575 in
50 mm 1.969 in
25 mm 0.984 in
30 mm 1.181 in
20 mm 0.787 in
15 mm 0.591 in
40 mm 1.575 in
10 mm 0.394 in
5 mm 0.197 in
50 mm 1.969 in
80 mm 3.150 in
100 mm 3.937 in
15 mm 0.591 in
10 mm 0.394 in
20 mm 0.787 in
5 mm 0.197 in
25 mm 0.984 in
30 mm 1.181 in
40 mm 1.575 in
50 mm 1.969 in
80 mm 3.150 in
100 mm 3.937 in
15 mm 0.591 in
20 mm 0.787 in
25 mm 0.984 in
30 mm 1.181 in
40 mm 1.575 in
50 mm 1.969 in
UV intensity (mW/cm2) Irradiation distance (mm in)
ø3.5
ø6.0
ø9.0
ø11.0
ø15.5
ø20.0
ø33.0
ø42.0
2,300mW/cm2
1,340mW/cm2
800mW/cm2
510mW/cm2
270mW/cm2
170mW/cm2
60mW/cm2
40mW/cm2
ø5.0
ø2.0
ø4.0
ø6.5
ø6.5
ø9.0
ø11.0
ø14.5
ø22.0
ø27. 0
6,380mW/cm2
2,560mW/cm2
3,550mW/cm2
1,600mW/cm2
850mW/cm2
620mW/cm2
330mW/cm2
200mW/cm2
70mW/cm2
40mW/cm2
ø7.5
ø6.5
ø5.0
ø3.0
ø3.5
ø5.5
ø8.0
ø10.0
ø17. 0
ø21.0
1,170 mW /c m 2
980mW/cm2
1,640mW/cm2
3,14 0mW/cm2
2,980mW/cm2
2,030mW/cm2
800mW/cm2
500mW/cm2
170mW/cm2
100mW/cm2
100
80
50
40
30
25
20
15
10
5
3.937
3.15 0
1.969
1.575
1.181
0.984
0.787
0.591
0.394
0.197
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
80 mm 3.150 in
100 mm 3.937 in
10 mm 0.394 in
15 mm 0.591 in
5 mm 0.197 in
20 mm 0.787 in
25 mm 0.984 in
50 mm 1.969 in
30 mm 1.181 in
40 mm 1.575 in
20 mm 0.787 in
25 mm 0.984 in
30 mm 1.181 in
15 mm 0.591 in
10 mm 0.394 in
40 mm 1.575 in
50 mm 1.969 in
5 mm 0.197 in
151050-5-10
-15 151050-5-10
-15 1050-5-10
-15
0.5910.3940 .1970- 0.1 97-0.394
-0.591 0.5910.3940.1970- 0.1 97-0.394
-0.591 0.394 15
0.5910.1970- 0.1 97-0.394
-0.591
Irradiation distance (mm in)
UV intensity (mW/cm2)
ø5.5
ø3.0
ø2.5
ø4.0
ø5.5
ø6.0
ø7.5
ø9.0
ø14.0
ø18.0
3,320mW/cm2
1,460mW/cm2
3,390mW/cm2
1,690mW/cm2
1,000mW/cm2
650mW/cm2
320mW/cm2
190mW/cm2
60mW/cm2
40mW/cm2
ø3.5
ø2.5
ø5.0
ø7.5
ø9.5
ø12.0
ø16.0
ø20.0
ø32.0
ø41.0
2,940mW/cm2
3,730mW/cm2
1,090mW/cm2
580mW/cm2
370mW/cm2
250mW/cm2
140mW/cm2
90mW/cm2
30mW/cm2
20mW/cm2
ø8.0
ø7.0
ø5.0
ø4.0
ø3.0
ø3.0
ø6.0
ø7.0
ø12.0
ø15.0
650mW/cm2
520mW/cm2
920mW/cm2
1,450mW/cm2
2,650mW/cm2
1,940mW/cm2
1,070mW/cm2
590mW/cm2
170mW/cm2
100mW/cm2
100
80
50
40
30
25
20
15
10
5
3.937
3.15 0
1.969
1.575
1.181
0.984
0.787
0.591
0.394
0.197
0
1,000
2,000
3,000
4,000
80 mm 3.150 in
100 mm 3.937 in
151050-5-10
-15 151050-5-10
-15 151050-5-10
-15
0.5910.3940 .1970- 0.1 97-0.394
-0.591 0.5910.3940.1970- 0 .19 7-0.394
-0.591 0.5910.3940.1970- 0 .19 7-0.394
-0.591
Irradiation area (mm in)
Irradiation distance Irradiation distance Irradiation distance
Irradiation area (mm in) Irradiation area (mm in)
Irradiation area (mm in) Irradiation area (mm in) Irradiation area (mm in)
: 70 % irradiation diameter intensity at central intensity.
Irradiation distance Irradiation distance Irradiation distance
: 70 % irradiation diameter intensity at central intensity.
Central intensity
Central intensity Central intensity
Central intensityCentral intensity Central intensity
ø0.138
ø0.236
ø0.354
ø0.433
ø0.610
ø0.787
ø1.299
ø1.654
ø0.197
ø0.079
ø0.157
ø0.256
ø0.256
ø0.354
ø0.433
ø0.571
ø0.866
ø1.063
ø0.295
ø0.256
ø0.197
ø0.118
ø0.138
ø0. 217
ø0.315
ø0.394
ø0.669
ø0.827
ø0. 217
ø0.118
ø0.098
ø0.157
ø0. 217
ø0.236
ø0.295
ø0.354
ø0.551
ø0.709
ø0.138
ø0.098
ø0.197
ø0.295
ø0.374
ø0.472
ø0.630
ø0.787
ø1.260
ø1.614
ø0.315
ø0.276
ø0.197
ø0.157
ø0.118
ø0.118
ø0.236
ø0.276
ø0.472
ø0.591
23
22
Aicure UP50
Intensity Profiles (Typical examples)
ANUP5051 (Without lens) ANUP5051AS (With AS lens) ANUP5051BS (With BS lens)
Bundle diameter: ø5 mm ø0.197 in, Straight
ANUP5031 (Without lens) ANUP5031AS (With AS lens) ANUP5031BS (With BS lens)
Bundle diameter: ø3.5 mm ø0.138 in, Straight
Aicure UP50
Central intensity
ø0.217
ø0 .197
ø0.295
ø0.453
ø5.5
ø5.0
ø7. 5
ø11. 5
2,210 mW/cm2
1,900 mW/cm2
1,050 mW/cm2
580 mW/cm2
Others
1 2 3 4
ANUP5051 ANUP5052 ANUP5053 ANUP5054
ANUP5032ANUP5031 ANUP5033 ANUP5034
Number of
branches
Shape
Bundle diameter:
ø3.5 mm ø0.138 in
(light outlet end)
Bundle diameter:
ø5 mm ø0.197 in
(light outlet end)
Bundle diameter:
ø8 mm ø0.315 in
(light outlet end)
ANUP5081
Lens (Note)
Lamp
Lamp lead wire
UV sensor
UV sensor extension cable
Heat ray cut filter
Part No.
ANUP5001AS
ANUP5001BS
Custom-made product
ANUP5001F
ANUPS204
ANUPS50H2
ANUJ3800
ANUJ38110
ANUJ38102
SpecificationsProduct name
Light guide fiber units
Options Intensity Profiles (Typical examples)
Note: Please consult us separately for the lens for the Ø8 mm Ø0.315 in fiber unit.
Note: The custom-made correspondence with the line type light outlet shape is also possible.
For more information, please consult us.
Short range converging lens
Long range converging lens
Cylindrical lens
Reflection type
For UP50
For UP50
Irradiation distance
0
1,000
2,000
3,000
Irradiation area (mm in)
15 mm 0.591 in
30 mm 1.181 in
40 mm 1.575 in
20 mm 0.787 in
40
30
20
15
1.575
1.181
0.787
0.591
ANUP5081 (Without lens)
Bundle diameter: ø8 mm ø0.315 in, Straight
151050-5-10
-15 0.5910.3940.1970- 0.1 97-0.394
-0.591
ø5 × 1 branch
ø5 × 2 branches
ø5 × 3 branches
ø5 × 4 branches
ø3.5 × 1 branch
ø3.5 × 2 branches
ø3.5 × 3 branches
ø3.5 × 4 branches
[Rough guide of the relationship between the number of fiber
unit branches and the UV intensity ratio]
(Irradiation distance: 15 mm 0.591 in, ø1 mm ø0.039 in sensor)
Fiber unit UV intensity ratio
Without lens
100 %
75 %
55 %
50 %
100 %
80 %
62 %
57 %
With lens
100 %
65 %
53 %
45 %
100 %
75 %
60 %
50 %
: 70 % irradiation diameter intensity at central intensity.
UP50
UP50 Controller
External control connector (18-pin M3 screw terminal block) terminal layout
100 3.937
180 7.0 8 7
Center of the light outlet
201 7. 913
140 5.512
11
0.433
165
130
212 8.346
32529 1130
2530
6.496
5.118
12.7951.142 0.4331.181
0.9841.181
ø59 ø2.323
Light outlet end shape
Without
lens
For AS
with lens
and BS
lens
10 0.39430 1.181 25 0.984 10 0.394 22 0.866 18 0.709
30 41 4125
1.181 1.614 1.614
0.984
1,000
(Minimum allowable bending radius: 50 mm 1.969 in, ANUP5081; Minimum allowable bending radius: 80 mm 3.15 0 i n)
Clad material: Quartz
Core material: Quartz
SUS flexible tube
Heat ray cut filter unit Lens unit
SUS mount ring
Light guide fiber units
Fiber bundle diameter:
ø5 mm ø 0.197 in
Fiber bundle diameter:
ø3.5 mm ø0.13 8 in
Fiber bundle diameter:
ø8 mm ø0.315 in
Dimensions (Unit: mm in) Excluding the protruding sections
Length: 2 m 6.562 ft
(Equivalent to the cable attached with ANUJ3800)
Slim type (Thickness: 5 mm 0.197 in)
(ANUJ38102 is attached.)
Length: 10 m 32.808 ft
(395) (15.551)
2
LAMP
STA B L E
4
SHUTTER
CLOSE
6
LAMP
CHANGE
8
GND
10
GND
12
GND
14
MANUAL
STA R T
16
LAMP
STA R T
18
+24V=
OUT IN
LAMP
ON
1
SHUTTER
OPEN
5
READY
3
OUT
ERROR
7
GND
9
INTER
(Note 1)
LOCK
13
GND
11
AUTO
STA R T
15
UV
CHECK
17
IN
M3 terminal
Note: At shipment, for B-contact (allows irradiation when ON), No.13 (INTERLOCK) is
connected to No.12 (GND) by a short-circuit line.
Irradiation distance (mm in)UV intensity (mW/cm2)
ø10 ø14
ø5
ø7
ø0.394 ø0.551
ø0.19 7
ø0.276
ø10 ø14 ø14
ø0.394 ø0.551 ø0.551
ø8 ø9
ø3.5
ø7
ø0.315 ø0.354
ø0.13 8
ø0.276
ø8 ø9 ø14
ø16 ø18
ø8
ø10
ø0.315 ø0.354 ø0.551
ø0.630 ø0.709
ø0.315
ø0.394
80 mm 3.150 in
100 mm 3.937 in
80 mm 3.150 in
100 mm 3.937 in
5 mm 0.197 in
10 mm 0.394 in
20 mm 0.787 in
15 mm 0.591 in
25 mm 0.984 in
30 mm 1.181 in
40 mm 1.575 in
50 mm 1.969 in
25 mm 0.984 in
30 mm 1.181 in
20 mm 0.787 in
15 mm 0.591 in
40 mm 1.575 in
10 mm 0.394 in
5 mm 0.197 in
50 mm 1.969 in
80 mm 3.150 in
100 mm 3.937 in
15 mm 0.591 in
10 mm 0.394 in
20 mm 0.787 in
5 mm 0.197 in
25 mm 0.984 in
30 mm 1.181 in
40 mm 1.575 in
50 mm 1.969 in
80 mm 3.150 in
100 mm 3.937 in
15 mm 0.591 in
20 mm 0.787 in
25 mm 0.984 in
30 mm 1.181 in
40 mm 1.575 in
50 mm 1.969 in
UV intensity (mW/cm2) Irradiation distance (mm in)
ø3.5
ø6.0
ø9.0
ø11.0
ø15.5
ø20.0
ø33.0
ø42.0
2,300mW/cm2
1,340mW/cm2
800mW/cm2
510mW/cm2
270mW/cm2
170mW/cm2
60mW/cm2
40mW/cm2
ø5.0
ø2.0
ø4.0
ø6.5
ø6.5
ø9.0
ø11.0
ø14.5
ø22.0
ø27. 0
6,380mW/cm2
2,560mW/cm2
3,550mW/cm2
1,600mW/cm2
850mW/cm2
620mW/cm2
330mW/cm2
200mW/cm2
70mW/cm2
40mW/cm2
ø7.5
ø6.5
ø5.0
ø3.0
ø3.5
ø5.5
ø8.0
ø10.0
ø17. 0
ø21.0
1,170 mW /c m 2
980mW/cm2
1,640mW/cm2
3,14 0mW/cm2
2,980mW/cm2
2,030mW/cm2
800mW/cm2
500mW/cm2
170mW/cm2
100mW/cm2
100
80
50
40
30
25
20
15
10
5
3.937
3.15 0
1.969
1.575
1.181
0.984
0.787
0.591
0.394
0.197
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
80 mm 3.150 in
100 mm 3.937 in
10 mm 0.394 in
15 mm 0.591 in
5 mm 0.197 in
20 mm 0.787 in
25 mm 0.984 in
50 mm 1.969 in
30 mm 1.181 in
40 mm 1.575 in
20 mm 0.787 in
25 mm 0.984 in
30 mm 1.181 in
15 mm 0.591 in
10 mm 0.394 in
40 mm 1.575 in
50 mm 1.969 in
5 mm 0.197 in
151050-5-10
-15 151050-5-10
-15 1050-5-10
-15
0.5910.3940 .1970- 0.1 97-0.394
-0.591 0.5910.3940.1970- 0 .19 7-0.394
-0.591 0.394 15
0.5910.1970- 0.1 97-0.394
-0.591
Irradiation distance (mm in)
UV intensity (mW/cm2)
ø5.5
ø3.0
ø2.5
ø4.0
ø5.5
ø6.0
ø7.5
ø9.0
ø14.0
ø18.0
3,320mW/cm2
1,460mW/cm2
3,390mW/cm2
1,690mW/cm2
1,000mW/cm2
650mW/cm2
320mW/cm2
190mW/cm2
60mW/cm2
40mW/cm2
ø3.5
ø2.5
ø5.0
ø7.5
ø9.5
ø12.0
ø16.0
ø20.0
ø32.0
ø41.0
2,940mW/cm2
3,730mW/cm2
1,090mW/cm2
580mW/cm2
370mW/cm2
250mW/cm2
140mW/cm2
90mW/cm2
30mW/cm2
20mW/cm2
ø8.0
ø7.0
ø5.0
ø4.0
ø3.0
ø3.0
ø6.0
ø7.0
ø12.0
ø15.0
650mW/cm2
520mW/cm2
920mW/cm2
1,450mW/cm2
2,650mW/cm2
1,940mW/cm2
1,070mW/cm2
590mW/cm2
170mW/cm2
100mW/cm2
100
80
50
40
30
25
20
15
10
5
3.937
3.15 0
1.969
1.575
1.181
0.984
0.787
0.591
0.394
0.197
0
1,000
2,000
3,000
4,000
80 mm 3.150 in
100 mm 3.937 in
151050-5-10
-15 151050-5-10
-15 151050-5-10
-15
0.5910.3940 .1970- 0.1 97-0.394
-0.591 0.5910.3940.1970- 0 .19 7-0.394
-0.591 0.5910.3940.1970- 0 .19 7-0.394
-0.591
Irradiation area (mm in)
Irradiation distance Irradiation distance Irradiation distance
Irradiation area (mm in) Irradiation area (mm in)
Irradiation area (mm in) Irradiation area (mm in) Irradiation area (mm in)
: 70 % irradiation diameter intensity at central intensity.
Irradiation distance Irradiation distance Irradiation distance
: 70 % irradiation diameter intensity at central intensity.
Central intensity
Central intensity Central intensity
Central intensityCentral intensity Central intensity
ø0.138
ø0.236
ø0.354
ø0.433
ø0.610
ø0.787
ø1.299
ø1.654
ø0.197
ø0.079
ø0.157
ø0.256
ø0.256
ø0.354
ø0.433
ø0.571
ø0.866
ø1.063
ø0.295
ø0.256
ø0.197
ø0.118
ø0.138
ø0. 217
ø0.315
ø0.394
ø0.669
ø0.827
ø0. 217
ø0.118
ø0.098
ø0.157
ø0. 217
ø0.236
ø0.295
ø0.354
ø0.551
ø0.709
ø0.138
ø0.098
ø0.197
ø0.295
ø0.374
ø0.472
ø0.630
ø0.787
ø1.260
ø1.614
ø0.315
ø0.276
ø0.197
ø0.157
ø0.118
ø0.118
ø0.236
ø0.276
ø0.472
ø0.591
23
22
Aicure UP50
Intensity Profiles (Typical examples)
ANUP5051 (Without lens) ANUP5051AS (With AS lens) ANUP5051BS (With BS lens)
Bundle diameter: ø5 mm ø0.197 in, Straight
ANUP5031 (Without lens) ANUP5031AS (With AS lens) ANUP5031BS (With BS lens)
Bundle diameter: ø3.5 mm ø0.138 in, Straight
Aicure UP50
Central intensity
ø0.217
ø0 .197
ø0.295
ø0.453
ø5.5
ø5.0
ø7. 5
ø11. 5
2,210 mW/cm2
1,900 mW/cm2
1,050 mW/cm2
580 mW/cm2
Others
1 2 3 4
ANUP5051 ANUP5052 ANUP5053 ANUP5054
ANUP5032ANUP5031 ANUP5033 ANUP5034
Number of
branches
Shape
Bundle diameter:
ø3.5 mm ø0.138 in
(light outlet end)
Bundle diameter:
ø5 mm ø0.197 in
(light outlet end)
Bundle diameter:
ø8 mm ø0.315 in
(light outlet end)
ANUP5081
Lens (Note)
Lamp
Lamp lead wire
UV sensor
UV sensor extension cable
Heat ray cut filter
Part No.
ANUP5001AS
ANUP5001BS
Custom-made product
ANUP5001F
ANUPS204
ANUPS50H2
ANUJ3800
ANUJ38110
ANUJ38102
SpecificationsProduct name
Light guide fiber units
Options Intensity Profiles (Typical examples)
Note: Please consult us separately for the lens for the Ø8 mm Ø0.315 in fiber unit.
Note: The custom-made correspondence with the line type light outlet shape is also possible.
For more information, please consult us.
Short range converging lens
Long range converging lens
Cylindrical lens
Reflection type
For UP50
For UP50
Irradiation distance
0
1,000
2,000
3,000
Irradiation area (mm in)
15 mm 0.591 in
30 mm 1.181 in
40 mm 1.575 in
20 mm 0.787 in
40
30
20
15
1.575
1.181
0.787
0.591
ANUP5081 (Without lens)
Bundle diameter: ø8 mm ø0.315 in, Straight
151050-5-10
-15 0.5910.3940.1970- 0.1 97-0.394
-0.591
ø5 × 1 branch
ø5 × 2 branches
ø5 × 3 branches
ø5 × 4 branches
ø3.5 × 1 branch
ø3.5 × 2 branches
ø3.5 × 3 branches
ø3.5 × 4 branches
[Rough guide of the relationship between the number of fiber
unit branches and the UV intensity ratio]
(Irradiation distance: 15 mm 0.591 in, ø1 mm ø0.039 in sensor)
Fiber unit UV intensity ratio
Without lens
100 %
75 %
55 %
50 %
100 %
80 %
62 %
57 %
With lens
100 %
65 %
53 %
45 %
100 %
75 %
60 %
50 %
: 70 % irradiation diameter intensity at central intensity.
UP50
UP50 Controller
External control connector (18-pin M3 screw terminal block) terminal layout
100 3.937
180 7.0 8 7
Center of the light outlet
201 7. 913
140 5.512
11
0.433
165
130
212 8.346
32529 1130
2530
6.496
5.118
12.7951.142 0.4331.181
0.9841.181
ø59 ø2.323
Light outlet end shape
Without
lens
For AS
with lens
and BS
lens
10 0.39430 1.181 25 0.984 10 0.394 22 0.866 18 0.709
30 41 4125
1.181 1.614 1.614
0.984
1,000
(Minimum allowable bending radius: 50 mm 1.969 in, ANUP5081; Minimum allowable bending radius: 80 mm 3.15 0 i n)
Clad material: Quartz
Core material: Quartz
SUS flexible tube
Heat ray cut filter unit Lens unit
SUS mount ring
Light guide fiber units
Fiber bundle diameter:
ø5 mm ø 0.197 in
Fiber bundle diameter:
ø3.5 mm ø0.13 8 in
Fiber bundle diameter:
ø8 mm ø0.315 in
Dimensions (Unit: mm in) Excluding the protruding sections
Length: 2 m 6.562 ft
(Equivalent to the cable attached with ANUJ3800)
Slim type (Thickness: 5 mm 0.197 in)
(ANUJ38102 is attached.)
Length: 10 m 32.808 ft
(395) (15.551)
2
LAMP
STA B L E
4
SHUTTER
CLOSE
6
LAMP
CHANGE
8
GND
10
GND
12
GND
14
MANUAL
STA R T
16
LAMP
STA R T
18
+24V=
OUT IN
LAMP
ON
1
SHUTTER
OPEN
5
READY
3
OUT
ERROR
7
GND
9
INTER
(Note 1)
LOCK
13
GND
11
AUTO
STA R T
15
UV
CHECK
17
IN
M3 terminal
Note: At shipment, for B-contact (allows irradiation when ON), No.13 (INTERLOCK) is
connected to No.12 (GND) by a short-circuit line.
Irradiation distance (mm in)UV intensity (mW/cm2)
ø10 ø14
ø5
ø7
ø0.394 ø0.551
ø0.19 7
ø0.276
ø10 ø14 ø14
ø0.394 ø0.551 ø0.551
ø8 ø9
ø3.5
ø7
ø0.315 ø0.354
ø0.13 8
ø0.276
ø8 ø9 ø14
ø16 ø18
ø8
ø10
ø0.315 ø0.354 ø0.551
ø0.630 ø0.709
ø0.315
ø0.394
25
24
Aicure Tube Type
Aicure Tube Type
The DICOOL optical mirror,
Metal halide lamp, and
UV auto control function
supports customer needs.
Ideal for UV irradiation of a variety of workpieces.
High efficiency and high intensity
Functions for this unit has been developed based on lighting
and control technologies accumulated over years, including a
unique Panasonic light distribution technology (efficient
irradiation) and DICOOL optical mirror, which prevents the rise
of workpiece temperature. The efficient light distribution allows
for high irradiation intensity, significantly enhancing productivity.
UV auto control function for
automatic compensation
Our unique UV auto control function automatically compensates
for decrease in the irradiation power due to lamp deterioration
over time, maintaining a stable UV irradiation until the end of
the lamp life.
*For 3 kW and 6 kW models
Principle of DICOOL optical mirror and DICOOL filter
UV lamp Heat ray transmitted
UV rays
DICOOL mirror
(Multi-layer optical function
reflection mirror)
DICOOL filter
Heat ray reflected
Metal halide lamp developed to significantly increase the thick film curing speed
The metal halide lamp has high luminous
efficiency at a wavelength range from 300 to
400 nm, which is about 20 % higher than the
efficiency of the conventional UV lamp. This
lamp is ideal for bonding, printing, marking,
etc. of materials containing a color and
materials that require thick film application.
Also, the lamp type can be selected
according to the type of UV-curable resin or
coating film thickness, etc.
DICOOL optical mirror (reflection mirror) adopted to prevent temperature rise
Our original DICOOL optical mirror which reflects UV rays only has been adopted. The DICOOL filter which transmits UV rays only can
also be installed as an option. These components decrease radiant heat from the lamp and reflection mirror, reducing the workpiece
temperature rise by about 40 %. This feature allows for a wider application to heat-sensitive materials. Also it is equipped with a safety
system that stops UV irradiation in case of an excessive temperature rise inside the lamp housing.
The metal halide lamp is suited for thick-film sealing, coating, bonding, and other general purposes.
The UV lamp is suited for applications that require higher surface-curing performance.
Spectral energy distribution
Wavelength (nm)
Relative energy (%)
Relative energy (%)
300 400 500 600 700 800
Metal halide lamp
100
80
60
40
20
0
UV lamp
Wavelength (nm)
100
80
60
40
20
0300 400 500 600 700 800
UV ray amount and workpiece temperature rise
DICOOL mirror
Aluminum reflection
mirror (our conventional
component)
UV ray amount (mJ/cm2)
Workpiece temperature
rise value (deg)
100
80
60
40
20
00500 1,000 1,500 2,000 2,500 3,000
DICOOL mirror + filter
Lamp lineup to cover the resin types and applications
The tube types are order made to customer specifications.
For more information, please consult us.
Power supply unit
Replacement lamps
A lamp with the best irradiation width can be chosen depending on workpiece size.
Irradiation width and lamp output intensity
Area with 75 % peak intensity is defined as effective irradiation width. The standard effective irradiation width along the lamp width is 50
mm 1.969 in, and the effective irradiation width along the lamp length is as shown in the table below.
Areas outside the effective irradiation width are also irradiated with UV rays; however, the irradiation intensity in these areas are lower.
Width along the lamp width
(Workpiece flow along the lamp length)
Width along the lamp length
(Workpiece flow perpendicular to the lamp length)
Note: The irradiation distance is 130 mm 5.118 in (DICOOL optical mirror).
Effective irradiation width (mm in)
Lamp emission
length (mm in)
50 1.969
50 1.969
50 1.969
50 1.969
50 1.969
50 1.969
100 3.937
150 5.906
200 7.874
300 11.811
400 15.748
650 25.591
3 kW
6 kW
1.5 kW
3 kW
6 kW
3 kW
6 kW
125 4.921
180 7.087
250 9.843
375 14.764
500 19.685
750 29.528
80 W/cm 120 W/cm 160 W/cm
Lamp output
Lamp output intensity
Along the
lamp width
Along the
lamp length
Electronic ballast type has a smaller size and 40 %
lower energy consumption
Compared with the conventional model (6 kW), the size and
weight has been significantly reduced to approx. 2/3 to 1/3. The
power supply capacity has been cut by approx. 40 %, achieving
significant energy conservation.
Function list
Capacity (kW)
Electronic ballast type
(with a UV auto control function)
Continuous intensity control function
50 to 100 % range (in 5 % increments)
Transformer type
With a switch for dimming the intensity to 75 %
Ballast type UV intensity control function
6 kW3 kW1.5 kW
Irradiation intensity (in the lamp width direction)
The 30 mm 1.181 in
wide and 100 mm
3.937 in wide types
are also available.
■Lamp: Metal halide lamp (1.5 kW)
Reflector: DICOOL optical mirror
Distance: 130 mm 5.118 in
100 mm 3.937 in wide type (custom-made product)
Note: The standard type is designed to uniformly irradiate the area of the 50 mm 1.969 in effective irradiation width.
■Lamp: Metal halide lamp (1.5 kW)
Reflector: DICOOL optical mirror
Distance: 130 mm 5.118 in
30 mm 1.181 in wide type (custom-made product)
■Lamp: Metal halide lamp (1.5 kW)
Reflector: DICOOL optical mirror
Distance: 130 mm 5.118 in
Distance from the lamp center (mm in)
0-20-40-60-80 20 40 60 80
0-0.787-1.575-2.362-3.150 0.787 1.575 2.362 3.150
600
500
400
300
200
100
0
50 mm 1.969 in wide type (Standard)
■Lamp UV rays output retention curve
Note: The effective irradiation width refers to the irradiation width when the light intensity is approx. 75 % of the peak intensity. The standard effective irradiation width along the lamp width is 50 mm
1.969 in. Areas outside the effective irradiation width are also irradiated with UV rays; however, the irradiation intensity in such areas is lower, taking longer to complete the curing process.
● The arc tube is heated (+700 to +800 °C +1,292 to +1,472 °F) during the lamp lighting. If the arc tube makes contact with a foreign substance or the user’s bare hands, the dirt can
cause the tube to lose its clarity, decreasing the lamp efficiency. When setting up the lamp, wipe the lamp with alcohol.
● Lighting the lamp alone will overheat and shorten the lamp life. Make sure to use a UV irradiation unit designed by our company and cool the lamp.
Lamp lighting time (hr)
100
90
80
70
0 500 1,000 1,500
● UV-curing lamp types include a UV lamp suited
for surface curing and a metal halide lamp ideal
for thick-film sealing, coating, and bonding.
● You can choose from a wide selection of lamps to
find the optimum type for the application.
● The average lamp life is 1,500 hours. Replace the
lamp when the total lighting time reaches about
1,500 hours. (The guaranteed life is 1,000 hours.)
Precautions for lamp handling
6
3
1.5
Depends on the
irradiation unit
Depends on the
irradiation unit
Part No.Lamp type Lamp power (kW) Total length
(mm in)
Emission length
(mm in)
Tube diameter
(mm in)
Effective irradiation width (mm in)
Along the lamp length
Along the lamp width
Metal halide lamp
80 W/cm type
120 W/cm type
160 W/cm type
UV lamp
80 W/cm type
120 W/cm type
160 W/cm type
ANUM10081
ANUM30081
ANUM60081
ANUM15021
ANUM30021
ANUM60021
ANUM30061
ANUM60061
ANUPL10081
ANUPL20081
ANUPL30081
ANUPL60081
ANUPL15021
ANUPL30021
ANUPL60021
ANUPL30061
ANUPL60061
1.0
3.0
6.0
1.5
3.0
6.0
3.0
6.0
1.0
2.0
3.0
6.0
1.5
3.0
6.0
3.0
6.0
215 8.465
475 18.701
850 33.465
215 8.465
350 13.780
600 23.622
280 11.024
475 18.701
215 8.465
350 13.780
475 18.701
850 33.465
215 8.465
350 13.780
600 23.622
280 11.024
475 18.701
125 4.921
375 14.764
750 29.528
125 4.921
250 9.843
500 19.685
180 7.087
375 14.764
125 4.921
250 9.843
375 14.764
750 29.528
125 4.921
250 9.843
500 19.685
180 7.087
375 14.764
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
100 3.937
300 11.811
650 25.591
100 3.937
200 7.874
400 15.748
150 5.906
300 11.811
100 3.937
200 7.874
300 11.811
650 25.591
100 3.937
200 7.874
400 15.748
150 5.906
300 11.811
Workpiece
flow Lamp Mirror
Effective irradiation width (mm in)
100
75
UV intensity (%)
Workpiece flow
Lamp Mirror
Effective irradiation width (mm in)
100
75
UV intensity (%)
UV intensity (mW/cm2)
600
500
400
300
200
100
0
UV intensity (mW/cm2)
600
500
400
300
200
100
0
UV intensity (mW/cm2)
Distance from the lamp center (mm in) Distance from the lamp center (mm in)
Retention ratio (%)
When replacing a lamp, without fail, use one with the same lamp power and same dimensions as the one being replaced.
Metal halide lamps and UV lamps of the same lamp power and same dimensions can be used to provide lighting in the same unit.
Sealed part Electrode Arc tube
Light emission length
Total length
Tube diameter
Lead wire
0-20-40-60-80 20 40 60 80
0-0.787-1.575-2.362-3.150 0.787 1.575 2.362 3.150
0-20-40-60-80 20 40 60 80
0-0.787-1.575-2.362-3.150 0.787 1.575 2.362 3.150
25
24
Aicure Tube Type
Aicure Tube Type
The DICOOL optical mirror,
Metal halide lamp, and
UV auto control function
supports customer needs.
Ideal for UV irradiation of a variety of workpieces.
High efficiency and high intensity
Functions for this unit has been developed based on lighting
and control technologies accumulated over years, including a
unique Panasonic light distribution technology (efficient
irradiation) and DICOOL optical mirror, which prevents the rise
of workpiece temperature. The efficient light distribution allows
for high irradiation intensity, significantly enhancing productivity.
UV auto control function for
automatic compensation
Our unique UV auto control function automatically compensates
for decrease in the irradiation power due to lamp deterioration
over time, maintaining a stable UV irradiation until the end of
the lamp life.
*For 3 kW and 6 kW models
Principle of DICOOL optical mirror and DICOOL filter
UV lamp Heat ray transmitted
UV rays
DICOOL mirror
(Multi-layer optical function
reflection mirror)
DICOOL filter
Heat ray reflected
Metal halide lamp developed to significantly increase the thick film curing speed
The metal halide lamp has high luminous
efficiency at a wavelength range from 300 to
400 nm, which is about 20 % higher than the
efficiency of the conventional UV lamp. This
lamp is ideal for bonding, printing, marking,
etc. of materials containing a color and
materials that require thick film application.
Also, the lamp type can be selected
according to the type of UV-curable resin or
coating film thickness, etc.
DICOOL optical mirror (reflection mirror) adopted to prevent temperature rise
Our original DICOOL optical mirror which reflects UV rays only has been adopted. The DICOOL filter which transmits UV rays only can
also be installed as an option. These components decrease radiant heat from the lamp and reflection mirror, reducing the workpiece
temperature rise by about 40 %. This feature allows for a wider application to heat-sensitive materials. Also it is equipped with a safety
system that stops UV irradiation in case of an excessive temperature rise inside the lamp housing.
The metal halide lamp is suited for thick-film sealing, coating, bonding, and other general purposes.
The UV lamp is suited for applications that require higher surface-curing performance.
Spectral energy distribution
Wavelength (nm)
Relative energy (%)
Relative energy (%)
300 400 500 600 700 800
Metal halide lamp
100
80
60
40
20
0
UV lamp
Wavelength (nm)
100
80
60
40
20
0300 400 500 600 700 800
UV ray amount and workpiece temperature rise
DICOOL mirror
Aluminum reflection
mirror (our conventional
component)
UV ray amount (mJ/cm2)
Workpiece temperature
rise value (deg)
100
80
60
40
20
00500 1,000 1,500 2,000 2,500 3,000
DICOOL mirror + filter
Lamp lineup to cover the resin types and applications
The tube types are order made to customer specifications.
For more information, please consult us.
Power supply unit
Replacement lamps
A lamp with the best irradiation width can be chosen depending on workpiece size.
Irradiation width and lamp output intensity
Area with 75 % peak intensity is defined as effective irradiation width. The standard effective irradiation width along the lamp width is 50
mm 1.969 in, and the effective irradiation width along the lamp length is as shown in the table below.
Areas outside the effective irradiation width are also irradiated with UV rays; however, the irradiation intensity in these areas are lower.
Width along the lamp width
(Workpiece flow along the lamp length)
Width along the lamp length
(Workpiece flow perpendicular to the lamp length)
Note: The irradiation distance is 130 mm 5.118 in (DICOOL optical mirror).
Effective irradiation width (mm in)
Lamp emission
length (mm in)
50 1.969
50 1.969
50 1.969
50 1.969
50 1.969
50 1.969
100 3.937
150 5.906
200 7.874
300 11.811
400 15.748
650 25.591
3 kW
6 kW
1.5 kW
3 kW
6 kW
3 kW
6 kW
125 4.921
180 7.087
250 9.843
375 14.764
500 19.685
750 29.528
80 W/cm 120 W/cm 160 W/cm
Lamp output
Lamp output intensity
Along the
lamp width
Along the
lamp length
Electronic ballast type has a smaller size and 40 %
lower energy consumption
Compared with the conventional model (6 kW), the size and
weight has been significantly reduced to approx. 2/3 to 1/3. The
power supply capacity has been cut by approx. 40 %, achieving
significant energy conservation.
Function list
Capacity (kW)
Electronic ballast type
(with a UV auto control function)
Continuous intensity control function
50 to 100 % range (in 5 % increments)
Transformer type
With a switch for dimming the intensity to 75 %
Ballast type UV intensity control function
6 kW3 kW1.5 kW
Irradiation intensity (in the lamp width direction)
The 30 mm 1.181 in
wide and 100 mm
3.937 in wide types
are also available.
■Lamp: Metal halide lamp (1.5 kW)
Reflector: DICOOL optical mirror
Distance: 130 mm 5.118 in
100 mm 3.937 in wide type (custom-made product)
Note: The standard type is designed to uniformly irradiate the area of the 50 mm 1.969 in effective irradiation width.
■Lamp: Metal halide lamp (1.5 kW)
Reflector: DICOOL optical mirror
Distance: 130 mm 5.118 in
30 mm 1.181 in wide type (custom-made product)
■Lamp: Metal halide lamp (1.5 kW)
Reflector: DICOOL optical mirror
Distance: 130 mm 5.118 in
Distance from the lamp center (mm in)
0-20-40-60-80 20 40 60 80
0-0.787-1.575-2.362-3.150 0.787 1.575 2.362 3.150
600
500
400
300
200
100
0
50 mm 1.969 in wide type (Standard)
■Lamp UV rays output retention curve
Note: The effective irradiation width refers to the irradiation width when the light intensity is approx. 75 % of the peak intensity. The standard effective irradiation width along the lamp width is 50 mm
1.969 in. Areas outside the effective irradiation width are also irradiated with UV rays; however, the irradiation intensity in such areas is lower, taking longer to complete the curing process.
● The arc tube is heated (+700 to +800 °C +1,292 to +1,472 °F) during the lamp lighting. If the arc tube makes contact with a foreign substance or the user’s bare hands, the dirt can
cause the tube to lose its clarity, decreasing the lamp efficiency. When setting up the lamp, wipe the lamp with alcohol.
● Lighting the lamp alone will overheat and shorten the lamp life. Make sure to use a UV irradiation unit designed by our company and cool the lamp.
Lamp lighting time (hr)
100
90
80
70
0 500 1,000 1,500
● UV-curing lamp types include a UV lamp suited
for surface curing and a metal halide lamp ideal
for thick-film sealing, coating, and bonding.
● You can choose from a wide selection of lamps to
find the optimum type for the application.
● The average lamp life is 1,500 hours. Replace the
lamp when the total lighting time reaches about
1,500 hours. (The guaranteed life is 1,000 hours.)
Precautions for lamp handling
6
3
1.5
Depends on the
irradiation unit
Depends on the
irradiation unit
Part No.Lamp type Lamp power (kW) Total length
(mm in)
Emission length
(mm in)
Tube diameter
(mm in)
Effective irradiation width (mm in)
Along the lamp length
Along the lamp width
Metal halide lamp
80 W/cm type
120 W/cm type
160 W/cm type
UV lamp
80 W/cm type
120 W/cm type
160 W/cm type
ANUM10081
ANUM30081
ANUM60081
ANUM15021
ANUM30021
ANUM60021
ANUM30061
ANUM60061
ANUPL10081
ANUPL20081
ANUPL30081
ANUPL60081
ANUPL15021
ANUPL30021
ANUPL60021
ANUPL30061
ANUPL60061
1.0
3.0
6.0
1.5
3.0
6.0
3.0
6.0
1.0
2.0
3.0
6.0
1.5
3.0
6.0
3.0
6.0
215 8.465
475 18.701
850 33.465
215 8.465
350 13.780
600 23.622
280 11.024
475 18.701
215 8.465
350 13.780
475 18.701
850 33.465
215 8.465
350 13.780
600 23.622
280 11.024
475 18.701
125 4.921
375 14.764
750 29.528
125 4.921
250 9.843
500 19.685
180 7.087
375 14.764
125 4.921
250 9.843
375 14.764
750 29.528
125 4.921
250 9.843
500 19.685
180 7.087
375 14.764
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
24 0.945
100 3.937
300 11.811
650 25.591
100 3.937
200 7.874
400 15.748
150 5.906
300 11.811
100 3.937
200 7.874
300 11.811
650 25.591
100 3.937
200 7.874
400 15.748
150 5.906
300 11.811
Workpiece
flow Lamp Mirror
Effective irradiation width (mm in)
100
75
UV intensity (%)
Workpiece flow
Lamp Mirror
Effective irradiation width (mm in)
100
75
UV intensity (%)
UV intensity (mW/cm2)
600
500
400
300
200
100
0
UV intensity (mW/cm2)
600
500
400
300
200
100
0
UV intensity (mW/cm2)
Distance from the lamp center (mm in) Distance from the lamp center (mm in)
Retention ratio (%)
When replacing a lamp, without fail, use one with the same lamp power and same dimensions as the one being replaced.
Metal halide lamps and UV lamps of the same lamp power and same dimensions can be used to provide lighting in the same unit.
Sealed part Electrode Arc tube
Light emission length
Total length
Tube diameter
Lead wire
0-20-40-60-80 20 40 60 80
0-0.787-1.575-2.362-3.150 0.787 1.575 2.362 3.150
0-20-40-60-80 20 40 60 80
0-0.787-1.575-2.362-3.150 0.787 1.575 2.362 3.150
27
26
We can also offer products using 1.5 kW, 3 kW and 6 kW type power supply units and lamps
according to your requirements of the irradiation area and energy.
In addition, the following specification options are also available. Please consult us for details.
1. Changing the belt to a heat-resistant resin belt
2. Changing the belt conveyor width and/or length
3. With shutter type
4. Change to irradiation width 30mm or 100 mm
1.181 in or 3.937 in
5. Decreasing the irradiation unit temperature (Adding a DICOOL filter)
6. Change to aluminum reflector
7. Adding a conveyor speed display
8. Making a conveyor-equipped type based on ANUP8000 Series
9. The irradiation unit position can be customized to be, for example,
perpendicular or parallel with respect to the workpiece flow direction if
necessary.
ANUP7000 Series (Standalone type)
Customization options
General-purpose type that supports a wide variety of workpieces, including electronic components
and PC boards
Specifications (ANUP7328E) (Metal halide lamp: 3 kW 120 W/cm type, base part number)
Standalone type
● The intensity can be adjusted
to a range from 50 to 100 % in
increments of 5 %.
● Ideal for workpieces of 300 mm
11.811 in or less in width and an
irradiation width of 200 mm
7.874 in or less.
● The lamp height can be easily
adjusted according to the
workpiece height.
● The lightweight compact design
facilitates in-line installation
with other equipment.
ANUP3000 Series (Bench top type)
The power supply unit is separate, and the system can be placed on the same rack as other
peripheral equipment, allowing for easy setup of the system
Power supply
UV lamp
Conveyor speed
Conveyor belt
Conveyable workpiece size
Conveyor height
Effective irradiation width
System size
System weight
Single phase 200 V (50 / 60 Hz), 30 A
3 kW × 1 lamp (Metal halide lamp, 120 W/cm)
0.5 to 5 m/min.
Stainless steel mesh belt
W: 300 × H: 100 mm W: 11.811 × H: 3.937 in
750 ±25 mm 29.528 ±0.984 in
200 mm 7. 874 i n
L: 1,200 × W: 536 × H: 1,156 mm L: 47.244 × W: 21.102 × H: 45.512 in
110 kg approx.
Aicure Tube Type
Part No. Lamp output Lamp output intensity Effective irradiation width
(width along the lamp width)
1.5 kW
3 kW
3 kW
3 kW
6 kW
6 kW
6 kW
ANUP8154
ANUP8304E
ANUP8308E
ANUP8368E
ANUP8604DE
ANUP8608DE
ANUP8668DE
100 mm 3.937 in
300 mm 11. 811 in
200 mm 7. 874 i n
150 mm 5.906 in
650 mm 25.591 in
400 mm 15.748 in
300 mm 11. 811 in
120 W/cm
80 W/cm
120 W/cm
160 W/cm
80 W/cm
120 W/cm
160 W/cm
Input power supply
Ballast type
Lamp
Metal halide lamp
UV lamp
External output signals
(Monitor function)
External input signals
(Remote control function)
Shutter open/close confirmation
(available in the type with the shutter function)
and temperature thermal normal
Shutter open / close
(available in the type with the shutter function)
Error monitor displays
Lamp intensity control
Auto control function
(UV intensity retention function)
Power supply unit size (mm in)
Weight
Lamp output 1.5 kW
200V AC 50 / 60Hz 30A
Single phase Three phase
1.5 kW
Transformer Electronic ballast
6 kW
6 kW
Detection of lamp-on, lamp stabilized, errors and
cooling fan operation (6 kW type only)
Lamp-ON / OFF, lamp output switching, interlock and
shutter open / close (available in the type with the
shutter function)
Lamp errors, lamp error output power supply unit errors,
lamp housing temperature errors, lamp cooling fan errors
and interlock
Lamp housing temperature errors
and lamp cooling fan errors
Adjustable range: 100 to 50 %
With a switch for dimming the intensity to 75 %
L: 270 × W: 685 × H: 475
L: 10.630 × W: 26.968 × H: 18.701
3 kW
200 / 220 / 240V AC 50 / 60Hz 30A
Single phase
3 kW
Equipped, adjustable
range:100 to 50 %
L: 340 × W: 450 × H: 247
L: 13.386 × W: 17.717 × H: 9.724
28 kg approx.
L: 450 × W: 310 × H: 175
L: 17.717 × W: 12.205 × H: 6.890
32 kg approx. 45 kg approx.
Equipped, adjustable
range:100 to 65 %
ANUP8000 Series
Wide selection of 1.5 kW, 3 kW, and 6 kW type helps select best option for
your production equipment.
●The 3 kW and 6 kW types adopt an electronic ballast (with a UV auto control function). The 1.5 kW types adopt a transformer system.
●The lamp housing and the power supply unit can be easily connected by metal connectors.
●The lamp switch automatically runs and stops the lamp cooling fan by timer control.
●The system has a lamp voltmeter and an hour meter.
6 kW3 kW
1.5 kW
Lamp housing
Fan (for 6 kW)
Power supply unit
Main base part number specifications
Power supply unit specifications
ANUP8000 Series (Standard type)
Tube type standard model Easy to install and set up.
Lamp housing Power supply unit
Specifications (ANUP8308E)
(Metal halide lamp: 3 kW 120 W/cm type, base part number)
Power supply
UV lamp
System size (mm in)
System weight
Single phase 200 V (50 / 60 Hz), 30 A
3 kW x 1 lamp (Metal halide lamp)
200 mm 7. 874 i n
L: 548 × W: 212 × H: 383 L: 21.575 × W: 8.346 × H: 15.079 (Lamp housing)
L: 340 × W: 450 × H: 247 L: 13.386 × W: 17.717 × H: 9.724 (Power supply unit)
Lamp housing: 15 kg approx., Power supply unit: 28 kg approx.
Notes: 1) Lamp type: Metal halide lamp
2) For UV lamp type, shutter, DICOOL filter, aluminum reflector type and other specifications, please consult us.
3) Except for some part numbers, ANUP8000 series products are delivered according to customer specifications. The part number will be presented when a quotation is issued.
4) All tube type products are order made to customer specifications. The part number will be presented when a quotation is issued.
200 V AC 50 / 60 Hz (Toggle switch selectable) 15 A
Aicure Tube Type
Notes: 1) For UV lamp type, shutter, DICOOL filter, aluminum reflector type and other specifications, please
consult us.
2) The 6 kW types are also available.
The tube type products are order made to customer specifications. For more information about the conveyor unit or other details, please consult us.
Power supply unitConveyor unit
Note: Conveyor unit varies in appearance according to the lamp specification.
Note: For UV lamp type, conveyor size, shutter, DICOOL filter, heat-resistant resin
belt, aluminum reflector type and other specifications, please consult us.
Effective irradiation width
(width along the lamp width)
27
26
We can also offer products using 1.5 kW, 3 kW and 6 kW type power supply units and lamps
according to your requirements of the irradiation area and energy.
In addition, the following specification options are also available. Please consult us for details.
1. Changing the belt to a heat-resistant resin belt
2. Changing the belt conveyor width and/or length
3. With shutter type
4. Change to irradiation width 30mm or 100 mm
1.181 in or 3.937 in
5. Decreasing the irradiation unit temperature (Adding a DICOOL filter)
6. Change to aluminum reflector
7. Adding a conveyor speed display
8. Making a conveyor-equipped type based on ANUP8000 Series
9. The irradiation unit position can be customized to be, for example,
perpendicular or parallel with respect to the workpiece flow direction if
necessary.
ANUP7000 Series (Standalone type)
Customization options
General-purpose type that supports a wide variety of workpieces, including electronic components
and PC boards
Specifications (ANUP7328E) (Metal halide lamp: 3 kW 120 W/cm type, base part number)
Standalone type
● The intensity can be adjusted
to a range from 50 to 100 % in
increments of 5 %.
● Ideal for workpieces of 300 mm
11.811 in or less in width and an
irradiation width of 200 mm
7.874 in or less.
● The lamp height can be easily
adjusted according to the
workpiece height.
● The lightweight compact design
facilitates in-line installation
with other equipment.
ANUP3000 Series (Bench top type)
The power supply unit is separate, and the system can be placed on the same rack as other
peripheral equipment, allowing for easy setup of the system
Power supply
UV lamp
Conveyor speed
Conveyor belt
Conveyable workpiece size
Conveyor height
Effective irradiation width
System size
System weight
Single phase 200 V (50 / 60 Hz), 30 A
3 kW × 1 lamp (Metal halide lamp, 120 W/cm)
0.5 to 5 m/min.
Stainless steel mesh belt
W: 300 × H: 100 mm W: 11.811 × H: 3.937 in
750 ±25 mm 29.528 ±0.984 in
200 mm 7. 874 i n
L: 1,200 × W: 536 × H: 1,156 mm L: 47.244 × W: 21.102 × H: 45.512 in
110 kg approx.
Aicure Tube Type
Part No. Lamp output Lamp output intensity Effective irradiation width
(width along the lamp width)
1.5 kW
3 kW
3 kW
3 kW
6 kW
6 kW
6 kW
ANUP8154
ANUP8304E
ANUP8308E
ANUP8368E
ANUP8604DE
ANUP8608DE
ANUP8668DE
100 mm 3.937 in
300 mm 11. 811 in
200 mm 7. 874 i n
150 mm 5.906 in
650 mm 25.591 in
400 mm 15.748 in
300 mm 11. 811 in
120 W/cm
80 W/cm
120 W/cm
160 W/cm
80 W/cm
120 W/cm
160 W/cm
Input power supply
Ballast type
Lamp
Metal halide lamp
UV lamp
External output signals
(Monitor function)
External input signals
(Remote control function)
Shutter open/close confirmation
(available in the type with the shutter function)
and temperature thermal normal
Shutter open / close
(available in the type with the shutter function)
Error monitor displays
Lamp intensity control
Auto control function
(UV intensity retention function)
Power supply unit size (mm in)
Weight
Lamp output 1.5 kW
200V AC 50 / 60Hz 30A
Single phase Three phase
1.5 kW
Transformer Electronic ballast
6 kW
6 kW
Detection of lamp-on, lamp stabilized, errors and
cooling fan operation (6 kW type only)
Lamp-ON / OFF, lamp output switching, interlock and
shutter open / close (available in the type with the
shutter function)
Lamp errors, lamp error output power supply unit errors,
lamp housing temperature errors, lamp cooling fan errors
and interlock
Lamp housing temperature errors
and lamp cooling fan errors
Adjustable range: 100 to 50 %
With a switch for dimming the intensity to 75 %
L: 270 × W: 685 × H: 475
L: 10.630 × W: 26.968 × H: 18.701
3 kW
200 / 220 / 240V AC 50 / 60Hz 30A
Single phase
3 kW
Equipped, adjustable
range:100 to 50 %
L: 340 × W: 450 × H: 247
L: 13.386 × W: 17.717 × H: 9.724
28 kg approx.
L: 450 × W: 310 × H: 175
L: 17.717 × W: 12.205 × H: 6.890
32 kg approx. 45 kg approx.
Equipped, adjustable
range:100 to 65 %
ANUP8000 Series
Wide selection of 1.5 kW, 3 kW, and 6 kW type helps select best option for
your production equipment.
●The 3 kW and 6 kW types adopt an electronic ballast (with a UV auto control function). The 1.5 kW types adopt a transformer system.
●The lamp housing and the power supply unit can be easily connected by metal connectors.
●The lamp switch automatically runs and stops the lamp cooling fan by timer control.
●The system has a lamp voltmeter and an hour meter.
6 kW3 kW
1.5 kW
Lamp housing
Fan (for 6 kW)
Power supply unit
Main base part number specifications
Power supply unit specifications
ANUP8000 Series (Standard type)
Tube type standard model Easy to install and set up.
Lamp housing Power supply unit
Specifications (ANUP8308E)
(Metal halide lamp: 3 kW 120 W/cm type, base part number)
Power supply
UV lamp
System size (mm in)
System weight
Single phase 200 V (50 / 60 Hz), 30 A
3 kW x 1 lamp (Metal halide lamp)
200 mm 7. 874 i n
L: 548 × W: 212 × H: 383 L: 21.575 × W: 8.346 × H: 15.079 (Lamp housing)
L: 340 × W: 450 × H: 247 L: 13.386 × W: 17.717 × H: 9.724 (Power supply unit)
Lamp housing: 15 kg approx., Power supply unit: 28 kg approx.
Notes: 1) Lamp type: Metal halide lamp
2) For UV lamp type, shutter, DICOOL filter, aluminum reflector type and other specifications, please consult us.
3) Except for some part numbers, ANUP8000 series products are delivered according to customer specifications. The part number will be presented when a quotation is issued.
4) All tube type products are order made to customer specifications. The part number will be presented when a quotation is issued.
200 V AC 50 / 60 Hz (Toggle switch selectable) 15 A
Aicure Tube Type
Notes: 1) For UV lamp type, shutter, DICOOL filter, aluminum reflector type and other specifications, please
consult us.
2) The 6 kW types are also available.
The tube type products are order made to customer specifications. For more information about the conveyor unit or other details, please consult us.
Power supply unitConveyor unit
Note: Conveyor unit varies in appearance according to the lamp specification.
Note: For UV lamp type, conveyor size, shutter, DICOOL filter, heat-resistant resin
belt, aluminum reflector type and other specifications, please consult us.
Effective irradiation width
(width along the lamp width)
1,050 mm type head production sample
(L: 1,225 × W: 210 × H: 110 mm L: 48.228 × W: 8.268 × H: 4.331 in)
Excl. wiring connections and protruding sections
Aicure UD90
UV irradiation intensity of 10,000 mW/cm2
class at irradiation distance 30 mm 1.181 in.
High power output LED Line Type
UV curing system
Power supply and controller unit
L: 500 × W: 300 × H: 710 mm
L: 19.685 × W: 11.811 × H: 27.953 in
Excl. wiring connections and protruding sections
Specifications
L: 500 × W: 300 × H: 710 mm
L: 19.685 × W: 11.811 × H: 27.953 in
(Depending on the irradiation specification, more than
two units will be required.)
30 mm 1.181 in, 80 mm 3 .15 0 in (types with standard
mounts for printing machines)
*For different specifications, please consult us.
Min. 70 to 1,800 mm 2.756 to 70.866 in
(* For more detailed specifications, please consult us.)
9,600 mW/cm2 can be supplied (at surface 30 mm
1.181 in below the irradiation section )
385 nm, 365 nm
Forced water cooling system (please make your own
arrangements for chillers, etc.)
* Clear water (or tap water) cooling can also be used.
Controller size
Effective irradiation
width
UV irradiation
intensity
Irradiation distance
UV wavelength
(Central wavelength)
Estimated light
source life
UV irradiation unit
cooling system
15, 000 hours approx. (* The value is not a guaranteed
value.)
Please contact:
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Global Sales Department
■Telephone: +81-568-33-7861 ■Facsimile: +81-568-33-8591
panasonic.net/id/pidsx/global
All Rights Reserved © 2016
Specifications are subject to change without notice. Printed in JapanNo.CE-UV-1-7 November, 2016
LED
UV Curing System
UJ30 / UJ35
UV Curing System
LAMP
UP50
LED
UV Curing System
UD40
series
LED
UV Curing System
UD90
series
UV Curing System
LAMP
ANUP7000
series
Energy saving, High brightness,
High accuracy UV irradiation using LED type
Complete range of Lamp type, too.
For resin curing in adhesion, printing, separation, coating, as a UV light source for inspection,
and for other uses, for workpieces and applications, choose from our lineup.
UV Curing System
LAMP
ANUP8000
series
LED Type / Lamp Type
UV Curing System
Aicure SERIES
panasonic.net/id/pidsx/global
2016.11
