AON6358 30V N-Channel MOSFET General Description Product Summary VDS * Trench Power MOS Technology * Low RDS(ON) * Low Gate Charge * High Current Capability * RoHS and Halogen-Free Compliant Applications ID (at VGS=10V) 30V 85A RDS(ON) (at VGS=10V) < 2.2m RDS(ON) (at VGS=4.5V) < 3.6m 100% UIS Tested 100% Rg Tested * DC/DC Converters in Computing * Isolated DC/DC Converters in Telecom and Industrial DFN5X6 Top View D Top View Bottom View 1 8 2 7 3 6 4 5 G PIN1 PIN1 PIN1 S Orderable Part Number Package Type Form Minimum Order Quantity AON6358 DFN 5x6 Tape & Reel 3000 Absolute Maximum Ratings TA=25C unless otherwise noted Parameter Drain-Source Voltage Symbol VDS Gate-Source Voltage C C Avalanche energy L=0.05mH VDS Spike 10s TC=25C Power Dissipation B TC=100C Power Dissipation A TA=70C C Thermal Characteristics Parameter Maximum Junction-to-Ambient A Maximum Junction-to-Ambient A D Maximum Junction-to-Case Rev. 1.0: December 2014 IAS 50 A EAS 63 mJ VSPIKE 36 V 48 Steady-State Steady-State W 19 6.2 W 4 TJ, TSTG Symbol t 10s A 34 PDSM Junction and Storage Temperature Range A 42 PD TA=25C V 230 IDSM TA=70C 20 67 IDM TA=25C Continuous Drain Current Units V 85 ID TC=100C Pulsed Drain Current Avalanche Current VGS TC=25C Continuous Drain Current G Maximum 30 RJA RJC -55 to 150 Typ 15 40 2.1 www.aosmd.com C Max 20 50 2.6 Units C/W C/W C/W Page 1 of 6 Electrical Characteristics (TJ=25C unless otherwise noted) Symbol Parameter STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage Conditions Min ID=250A, VGS=0V Typ Zero Gate Voltage Drain Current IGSS VGS(th) Gate-Body leakage current VDS=0V, VGS=20V Gate Threshold Voltage VDS=VGS, ID=250A V 1 TJ=55C 1.4 100 nA 1.8 2.2 V 1.8 2.2 2.6 3.2 3.6 RDS(ON) Static Drain-Source On-Resistance VGS=4.5V, ID=20A 2.8 gFS Forward Transconductance VDS=5V, ID=20A 91 VSD Diode Forward Voltage IS=1A,VGS=0V IS Maximum Body-Diode Continuous Current TJ=125C 0.67 DYNAMIC PARAMETERS Input Capacitance Ciss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance VGS=0V, VDS=15V, f=1MHz m S 1 V 60 A 2200 pF 1000 pF 100 pF 1.9 2.9 33 47 nC Qg(4.5V) Total Gate Charge 15 21 Gate Source Charge Qgd tD(on) tr Turn-On Rise Time tD(off) Turn-Off DelayTime tf trr Turn-Off Fall Time Qrr VGS=10V, VDS=15V, ID=20A 0.9 m SWITCHING PARAMETERS Qg(10V) Total Gate Charge Qgs f=1MHz A 5 VGS=10V, ID=20A Coss Units 30 VDS=30V, VGS=0V IDSS Max nC 6.7 nC Gate Drain Charge 4.7 nC Turn-On DelayTime 9.5 ns VGS=10V, VDS=15V, RL=0.75, RGEN=3 3.5 ns 30 ns 6 ns IF=20A, dI/dt=500A/s 17 Body Diode Reverse Recovery Charge IF=20A, dI/dt=500A/s 42 ns nC Body Diode Reverse Recovery Time A. The value of RJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25C. The Power dissipation PDSM is based on R JA t 10s and the maximum allowed junction temperature of 150C. The value in any given application depends on the user's specific board design. B. The power dissipation PD is based on TJ(MAX)=150C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C. Single pulse width limited by junction temperature TJ(MAX)=150C. D. The RJA is the sum of the thermal impedance from junction to case RJC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300s pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of TJ(MAX)=150C. The SOA curve provides a single pulse rating. G. The maximum current rating is package limited. H. These tests are performed with the device mounted on 1 in2 FR-4 board with 2oz. Copper, in a still air environment with TA=25C. THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev. 1.0: December 2014 www.aosmd.com Page 2 of 6 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 100 100 4.5V VDS=5V 3.5V 80 80 10V 125C 60 ID(A) ID (A) 60 40 25C 40 20 20 VGS=3V 0 0 0 1 2 3 4 0 5 1 3 4 5 6 VGS(Volts) Figure 2: Transfer Characteristics (Note E) VDS (Volts) Figure 1: On-Region Characteristics (Note E) 5 Normalized On-Resistance 1.8 4 RDS(ON) (m) 2 VGS=4.5V 3 2 VGS=10V 1 VGS=10V ID=20A 1.6 1.4 1.2 VGS=4.5V ID=20A 1 0.8 0 0 5 10 15 20 25 0 30 25 50 75 100 125 150 175 Temperature (C) Figure 4: On-Resistance vs. Junction Temperature (Note E) ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage (Note E) 5 1.0E+01 ID=20A 1.0E+00 125C 1.0E-01 125C 3 IS (A) RDS(ON) (m) 4 1.0E-02 2 25C 1.0E-03 25C 1 1.0E-04 0 1.0E-05 2 4 6 8 10 VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage (Note E) Rev.1.0: September 2013 www.aosmd.com 0.0 0.2 0.4 0.6 0.8 1.0 VSD (Volts) Figure 6: Body-Diode Characteristics (Note E) Page 3 of 6 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 10 3500 VDS=15V ID=20A 3000 Capacitance (pF) VGS (Volts) 8 6 4 Ciss 2500 2000 Coss 1500 1000 2 Crss 500 0 0 0 10 20 30 40 0 5 Qg (nC) Figure 7: Gate-Charge Characteristics 20 25 30 1000 10s RDS(ON) limited 10.0 800 100s 1ms 10ms DC 1.0 0.1 600 400 200 TJ(Max)=150C TC=25C 0.0 0.01 TJ(Max)=150C TC=25C 10s Power (W) ID (Amps) 15 VDS (Volts) Figure 8: Capacitance Characteristics 1000.0 100.0 10 0.1 1 10 VDS (Volts) VGS> or equal to 4.5V Figure 9: Maximum Forward Biased Safe Operating Area (Note F) 100 0 1E-05 0.0001 0.001 0.01 0.1 1 10 100 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toCase (Note F) ZJC Normalized Transient Thermal Resistance 10 D=Ton/T TJ,PK=TC+PDM.ZJC.RJC In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse RJC=2.6C/W 1 0.1 PD Single Pulse Ton T 0.01 1E-05 0.0001 0.001 0.01 0.1 1 10 100 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance (Note F) Rev. 1.0: December 2014 www.aosmd.com Page 4 of 6 60 100 45 75 Current rating ID(A) Power Dissipation (W) TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 30 15 50 25 0 0 0 25 50 75 100 125 150 0 25 TCASE (C) Figure 12: Power De-rating (Note F) 50 75 100 125 150 TCASE (C) Figure 13: Current De-rating (Note F) 10000 TA=25C Power (W) 1000 100 10 1 1E-05 0.001 0.1 10 1000 ZJA Normalized Transient Thermal Resistance Pulse Width (s) Figure 14: Single Pulse Power Rating Junction-to-Ambient (Note H) 10 1 D=Ton/T TJ,PK=TA+PDM.ZJA.RJA RJA=50C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0.1 0.01 PD Single Pulse Ton 0.001 0.0001 0.001 0.01 0.1 1 10 T 100 1000 Pulse Width (s) Figure 15: Normalized Maximum Transient Thermal Impedance (Note H) Rev. 1.0: December 2014 www.aosmd.com Page 5 of 6 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + Vds VDC - Qgs Qgd VDC - DUT Vgs Ig Charge Resistive Switching Test Circuit & Waveforms RL Vds Vds DUT Vgs 90% + Vdd VDC - Rg 10% Vgs Vgs td(on) tr td(off) ton tf toff Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L 2 EAR= 1/2 LIAR Vds BVDSS Vds Id + Vdd Vgs Vgs I AR VDC - Rg Id DUT Vgs Vgs Diode Recovery Test Circuit & Waveforms Q rr = - Idt Vds + DUT Vds - Isd Vgs Ig Rev. 1.0: December 2014 Vgs L Isd + Vdd t rr dI/dt I RM Vdd VDC - IF Vds www.aosmd.com Page 6 of 6