HARTING har-speed M12 People | Power | Partnership HARTING har-speed M12 har-speed M12: The innovative solution With har-speed M12 HARTING bases the Ethernet network on a sustainable M12 foundation. The har-speed M12 differs significantly from today's M12 connectors for Ethernet because it is based on a 4-pair connector face with paired shielding. This allows har-speed M12 to be used for Ethernet transfer rates up to 10 Gigabit. The new HARTING har-speed M12 connector is, therefore, capable of complying with the high requirements of the transfer class EA, respectively the Cat. 6A. For the first time an M12 cabling system can be used for relevantly high data performance and permanent sustainability. The har-speed M12 connectors can be optimally used for applications with bandwidths in machine and facility engineering, but also for the IP 67 infrastructure. The basis for the new development is the new PAS 61076-2-10x that defines a uniform connector face for 8-pole M12 connectors. The new connector face complies with the following requirements: * Maximum data rates through the configuration of the contacts in conformance with Ethernet technology. * Minimal interaction and perfect shielding through paired shielding of the contacts. * Fault proof connection through coding of the connector face. A connection error with other 8-pole M12's is impossible. Overmolded versions in different lengths and a crimp connector for the local cabling are the first system components for a comprehensive cabling infrastructure solution by HARTING. Cabling instructions 30 - 35 mm 12 mm 4 2 1. Remove cable sheath. 2. Draw up the braid. 3. Remove paired shielding. 4. Remove plastic foil. 5. Remove wire insulation. 6. Crimp contacts. 7. Attach locknut and seal. 8. Pull braid apart. 9. A ttach shield element (braid lies between seal and shield element). 10. Place contact in insulator. 11. Lock cover on insulator and insert insulator into housing. Observe coding! 12. Remove excess braid. 13. Tighten locknut. HARTING har-speed M12 har-speed M12 connector CHARACTERISTICS * Cabling with crimp technology * Compact, robust design * Fully shielded * Transfer class E A for 1 and 10 Gigabit Ethernet * AWG 28 to AWG 24 * Temperature range -40 C to 85 C * Protection class IP 65 / IP 67 Identification Part number har-speed M12 connector 21 03 881 5805 har-speed M12 PCB receptacle CHARACTERISTICS * Stable, industrial standard design * Fully shielded * Transfer class E A for 1 and 10 Gigabit Ethernet * Temperature range -40 C to 70 C * Protection class IP 65 / IP 67 Identification Part number har-speed M12 PCB receptacle 21 03 381 2801 har-speed M12 system cable CHARACTERISTICS * Transfer class E A for 1 and 10 Gigabit Ethernet * Temperature range -40 C to 70 C Length 1m 3m 5m 7m 10 m Part number 21 03 483 1801 21 03 483 1803 21 03 483 1805 21 03 483 1807 21 03 483 1810 har-speed M12 accessories Identification Part number Contacts Locator Crimping tool 21 01 100 9014 61 03 600 0065 09 99 000 0501 Further products and information under www.HARKIS.HARTING.com People | Power | Partnership 3 MO/13.11.09/5.0 98 32 004 0201 www.HARTING.com