Data Sheet 40.1001 Page 1/4
06.03 / 00398114
M. K. JUCHHEIM GmbH & Co
Delivery address:Mackenrodtstraße 14,
36039 Fulda, Germany
Postal address:
36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: mail@jumo.net
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM 20 2TT, UK
Phone: +44 1279 635533
Fax: +44 1279 635262
E-mail: sales@jumo.co.uk
Internet: www.jumo.co.uk
JUMO PROCESS CONTROL INC.
885 Fox Chase, Suite 103
Coatesville PA 19320, USA
Phone: 610-380-8002
1-800-554-JUMO
Fax: 610-380-8009
E-mail: info@JumoUSA.com
Internet: www.JumoUSA.com
Pressure transmitter
JUMO MIDAS
Type 401001
Brief description
Pressure transmitters are used for measuring the relative (gauge) pressure in liquids and
gases. The pressure transmitter incorporates a thick-film strain gauge as a measuring de-
vice. The pressure sensor has an aluminium-oxide (Al2O3) ceramic base material. The
pressure is converted into an electrical signal.
Technical data
Reference conditions
to DIN 16 086 and IEC 770/5.3
Ranges
see order details
Overload limits
for ranges
0 — 40 bar 3 x full scale
ranges
0 — 60 to 0 — 100 bar 2 x full scale
Bursting pressure
ranges 0 — 40 bar ≤ 5 x full scale
ranges
0 — 60 to 0 — 100 bar 3 x full scale
Parts in contact with medium
standard: st. steel, Mat. Ref. 1.4305,
(AI2O3) 96%
seal: Viton®(FPM) or Isolast®(FFPM)
Output
4—20 mA
2-wire burden ≤ (UB-10 V) / 0.02A
0.5 — 4.5 V burden ≥ 20 kΩ
1 — (5)6 V burden ≥ 10 kΩ
0 — 10 V burden ≥ 10 kΩ
Burden error
< 0.5% max.
Zero offset
≤ 0.3% of full scale
Thermal hysteresis
≤ ± 0.8% of full scale
Ambient temperature error
within range -20 to +85°C
(compensated temperature range)
zero: ≤ 0.02%/°C typical,
≤ 0.04%/°C max.
span: ≤ 0.02%/°C typical,
≤ 0.04%/°C max.
Deviation from characteristic
≤ 0.5% of full scale
(limit point adjustment)
Hysteresis
≤ 0.2% of full scale
Repeatability
≤ 0.1% of full scale
Response time
≤ 3 msec max.
Stability per year
≤ 1% of full scale
Supply
10 — 30 V DC (for output 4 — 20 mA
and 1 — (5)6 V)
5 V DC (for output 0.5 — 4.5 V)
11.5 — 30 V DC (for output 0 — 10 V)
Ripple: the voltage spikes must not go
above or below the values specified for the
supply
max. current drawn: approx. 25 mA
Supply voltage error
≤ 0.02% per V
(nominal supply voltage 24 V DC)
ratiometric with supply 5 V DC (±0.5 V)
Permissible ambient temperature
for version with plug:
-20 to +125°C
for version with attached cable:
-20 to +100°C
Storage temperature
-40 to +125°C
for version with attached cable
-20 to +100°C
Permissible temperature of medium
-30 to +125°C
Electromagnetic compatibility (EMC)
to EN 61 326
Mechanical shock
(to IEC 68-2-27)
100 g/1 msec
Mechanical vibration
(to IEC 68-2-6)
20 g max. at 15 — 2000 Hz
Protection
with terminal box
IP65 to EN 60 529
(diameter of connecting cable
5 mm min., 7 mm max. )
with connecting cable or
circular connector M 12 x 1
IP67 to EN 60 529
Housing
stainless steel, Mat. Ref. 1.4305
EPDM
Pressure connection
see order details;
other connections on request
Type 401001/000-xxx-xxx-xx-xxx-61
Type 401001/000-xxx-xxx-xx-xxx-36
M. K. JUCHHEIM GmbH & Co • 36035 Fulda, Germany Data Sheet 40.1001 Page 2/4
06.03 / 00398114
Electrical connection Terminal
assignment
Connection Terminals
Terminal box Cable M12x1
Supply (with output)
10 — 30 V DC (1 — (5)6 V)
11.5 — 30 V DC (0 — 10 V)
5 V DC (0.5 — 4.5 V)
1 L+
2 L-
white
brown
1+
2-
Output
1 — (5)6 V
0—10 V
0.5 — 4.5 V
2 -
3 +
brown
yellow
2-
3+
Supply (with output)
10 — 30 V DC (4 — 20 mA,
2-wire)
1 L+
2 L-
white
brown
1+
3-
Output 4 — 20 mA, 2-wire 1 +
2 -
white
brown
1+
3-
proportional current 4 — 20 mA
in supply
Electrical connection
see order details
terminal box to DIN 43 650, style A,
conductor cross-section up to 1.5 mm2
or
attached 4-core PVC cable, length 0.5 m,
other lengths on request
or
4-pole circular connector, M12x1
Nominal position
any
Weight
100 g
1
4
2
3
Dimensions
Process connections
M. K. JUCHHEIM GmbH & Co • 36035 Fulda, Germany Data Sheet 40.1001 Page 3/4
06.03 / 00398114
Process connections
Order details
Basic type
401001 Pressure transmitter JUMO MIDAS
IBasic type extensions
I/000none
I/999special version
II Input
I I 455 0 1.6 bar gauge pressure
I I 456 0 2.5 bar gauge pressure
I I 457 0 4 bar gauge pressure
I I 458 0 6 bar gauge pressure
I I 459 0 10 bar gauge pressure
I I 460 0 16 bar gauge pressure
I I 461 0 25 bar gauge pressure
I I 462 0 40 bar gauge pressure
I I 463 0 60 bar gauge pressure
I I 464 0 100 bar gauge pressure
I I 479 -1 0.6 bar gauge pressure
I I 480 -1 1.5 bar gauge pressure
I I 481 -1 3 bar gauge pressure
I I 482 -1 5 bar gauge pressure
I I 483 -1 9 bar gauge pressure
I I 484 -1 15 bar gauge pressure
I I 485 -1 24 bar gauge pressure
I I 999 special range
III Output
I I I 405 4 — 20 mA 2-wire
I I I 412 0.5 — 4.5 V 3-wire
I I I 415 0 — 10 V 3-wire
I I I 418 1 — 5 V 3-wire
I I I 420 1 — 6 V 3-wire
IIII Process connection (not front-flush)
I I I I 501 G 1/8 to EN 837
I I I I 502 G 1/4 to EN 837
I I I I 511 1/4-18 NPT to EN 837
I I I I 521 G 1/4 to DIN 3852 T11
I I I I 523 G 1/2 to DIN 3852 T11
I I I I 562 7/16 UNF
I I I I 563 7/16 internal UNF, with valve seating
IIIII Material of process connection
I I I I I 20 stainless steel
I I I I I 46 brass (on request)
M. K. JUCHHEIM GmbH & Co • 36035 Fulda, Germany Data Sheet 40.1001 Page 4/4
06.03 / 00398114
Accessories
IIIIIIMaterial for seal
IIIIII601Viton
® (FPM)
I I I I I I 602 Neoprene® (FPM)
IIIIII604Isolast
® (FPM, material properties are similar to PTFE)
I I I I I I 999 special material
IIIIIIIElectrical connection
I I I I I I I 11 attached cable 0.5 m
I I I I I I I 36 circular connector M 12 x 1
IIIIIII61terminal box
I I I I I III
401001 / - - - - - - Order code
Designation Sales No.
4-pole straight socket M12x1 with 2 m PVC cable 40/00404565
4-pole angled socket M12x1, with 2m PVC cable 40/00409334
