CUT35 Series Dual or Triple Output 35W Low Profile Power Supplies Features 2 x 4 x 1.06" footprint Output 1 isolated from outputs 2 & 3 No minimum loading Medical & ITE Certifications Three year warranty Key Market Segments & Applications Specifications Model CUT35-522 AC Input Voltage (1) Input Frequency DC Input Voltage Inrush Current (cold start) Power Factor Input Current (100 / 200VAC) Temperature Coefficient (-20 to +70C) Overcurrent Protection Overvoltage Protection (2) Efficiency (Typical at 200VAC Input) Hold Up Time (115 / 230V input) Leakage Current (265VAC 50Hz) Operating Temperature (3) VAC Hz VDC A A V % ms mA - Storage Temperature Operating Humidity (non condensing) Cooling Withstand Voltage - Isolation Resistance Vibration (non operating) Shock Immunity Safety Agency Certifications - Conducted & Radiated EMI Weight (Typ) Size (WxLxH) Warranty g in (mm) yrs CUT35-5FF 85 - 265VAC 47 - 63Hz 88 - 370VDC (No safety certification) 13A at 100VAC, 32A at 230VAC Meets EN61000-3-2 1 / 0.5 V1: <0.02%/C, V2 & 3 <0.03%/C > 105% V1: 5.7-7.0, V2: 13.8 - 16.8V V1: 5.7-7.0, V2: 17.2 - 21.0V 81% 82% 20ms <0.3mA Open Frame & /B:-20 to +70C. Derate linearly to 70% load from +55 to +70C Cover:-20 to +60C. Derate linearly to 70% load from +45 to +60C -30 to +85C 5 - 95% RH Convection Input to Ground 2kVAC, Input to Output 3kVAC, Output to Ground 500VAC, V1 to V2 / V3 500VAC for 1 min. >100M at 25C & 70%RH, Output to Ground 500VDC 10 - 55Hz: 19.6m/s2 constant sweep 1 min X, Y, Z for 1 hour < 196.1 m/s2 (20G) IEC61000-4-2 (lv 3, 4), -3 (lv3), -4 (lv 4), -5 (lv3, 4), -6 (lv 3), -8 (lv 4), -11 UL60950-1, CSA60950-1-07 (cTUVus), EN60950-1, CE Mark ANSI/AAMI ES60601-1, CSA 60601-1 (cTUVus), IEC/EN60601-1 (2 x MOOP) EN55011-B, FCC-B Open frame: 90, Baseplate: 136, Cover: 175 Open Frame: 2 x 4 x 1.06"" (50.8 x 101.6 x 27) Baseplate: 2.22 x 4.8 x 1.1"" (56.5 x 122 x 28) Cover: 2.48 x 4.92 x 1.42"" (63.1 x 125 x 36) Three Years (1) Derate linearly to 60% load from 100VAC to 85VAC input when ambient is <-10C (2) Cycle AC to reset (3) See derating curves in installation manual for all mounting orientatons 1-800-526-2324 * www.us.tdk-lambda.com/lp/ 86 Disclaimer: us.tdk-lambda.com/lp/legal.htm CUT35 Series Model Selector Voltage (V) Adjust Range (V) Max Current (A) Max Power (W) V1 5V V2 +12V 5 - 5.25 3 15 Fixed 1.2 V3 -12V Fixed 0.85 V1 5V 5 - 5.25 3 V2 24V Fixed Model CUT35-522 CUT35-522 Load Reg Line Reg (mV) (mV) Ripple Noise (mV) 100 50 120 600 240 150 600 240 150 15 100 50 120 0.85 20.4 750 300 150 3 15 100 50 120 750 300 150 750 300 150 20.4 (Leave common terminal unconnected) CUT35-5FF CUT35-5FF V1 5V 5 - 5.25 V2 +15V Fixed 1 V3 -15V Fixed 0.65 V1 5V 5 - 5.25 3 15 100 50 120 V2 30V Fixed 0.65 19.5 750 300 150 19.5 (Leave common terminal unconnected) Note CUT35 can be configured as a dual or single output. Outline Drawing Options Suffix Blank /A /B Description Open frame with JST connectors Cover with JST connectors Baseplate with JST connectors For Additional Information, please visit us.tdk-lambda.com/lp/products/cut75-series.htm 1-800-526-2324 * www.us.tdk-lambda.com/lp/ 87 Revision A2: Sept 2017