!Note * This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P05E.pdf 11.1.11 Ceramic Filters (CERAFILr)/ Ceramic Discriminators for Communications Equipment Cat.No.P05E-15 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for EU RoHS Compliant * * * All the products in this catalog comply with EU RoHS. EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment". For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. CONTENTS 1 CERAFILr and "CERAFIL" in this catalog are the trademarks of Murata Manufacturing Co., Ltd. 2 Part Numbering 2 Products Guide 4 1 CERAFILr kHz SMD Type SFPKA Series 5 2 CERAFILr kHz SMD Type CFUKG Series 7 3 CERAFILr kHz SMD Type CFUKG_X Series 9 4 CERAFILr kHz SMD Type CFUKF Series 11 5 CERAFILr kHz SMD Type CFWKA Series 13 6 CERAFILr kHz SMD Type CFWKA_Y Series 15 kHz SMD Type CERAFILr Notice 17 7 CERAFILr MHz SMD Type SFECF10M7 Series 19 8 CERAFILr MHz SMD Type SFSCE10M7 Series 21 MHz SMD Type CERAFILr Notice 23 SMD Type CERAFILr Standard Land Pattern Dimensions 27 kHz SMD Type CERAFILr Packaging 28 MHz SMD Type CERAFILr Packaging 30 9 CERAFILr Plastic Case General Use CFULA Series 31 10 CERAFILr Plastic Case General Use CFWLA Series 33 11 CERAFILr Plastic Case Miniaturized Type CFULB Series 35 12 CERAFILr Plastic Case Miniaturized Type CFWLB Series 37 13 CERAFILr Plastic Case Group Delay Flat Type CFULA_Y Series 39 14 CERAFILr Plastic Case Group Delay Flat Type CFWLA_Y Series 41 15 CERAFILr Plastic Case Group Delay Flat Type Miniaturized Type CFULB_Y Series 43 16 CERAFILr Plastic Case Group Delay Flat Type CFWLB_Y Series 45 Plastic Case Type CERAFILr Minimum Quantity/Notice 47 17 kHz Type Ceramic Discriminators 48 18 MHz Type Ceramic Discriminators 61 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Ceramic Discriminators Notice 66 Ceramic Discriminators Standard Land Pattern Dimensions/Packaging 69 18 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. o Part Numbering Ceramic Filters (CERAFILr) for IF (Part Number) SF P KA 455K SF E CF 10M7 DF00 q w e r -R0 D4A t S0 -R0 y u qProduct ID wOscillating/Element tProduct Specification Product ID CF Ceramic Filters Oscillating/Element U 4 Elements Area Expansion mode W 6 Elements Area Expansion mode P 4 Elements Area Expansion mode Product Specification D4A Three-digit alphanumerics express pass band width, center frequency tolerance and design type. SFE/S/J series are expressed by four-digit alphanumerics. E 2 Elements Thickness Expansion mode SF S 2 Elements Thickness Shear mode eStructure/Size Code Structure/Size Cp/Kp Chip Type Lp Lead Type p is "A" or subsequent code, which indicates the size. It varies depending on vibration mode and number of elements. Chip type is only applied for SF series. rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is hertz (Hz). If the unit is "kHz", it is expressed by three figures plus "K". If the unit is "MHz", a decimal point is expressed by the capital letter "M". 2 Code yIndividual Specification Code Individual Specification Code 001 Expressed by three-digit alphanumerics. SFE/S/J series are expressed by two-digit alphanumerics. With standard type, y is omitted. uPackaging Code Packaging -B0 Bulk -R0 Embossed Taping o=180mm -R1 Embossed Taping o=330mm -M0 Magazine Magazine cassette is applied to lead type and embossed taping to chip type. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Discriminators for IF (kHz) (Part Number) CD B LB 450K q w e r C X A 16 t y u i -B0 o uElement Type qProduct ID Product ID CD Ceramic Discriminators Code Element Type X Low-capacitance Y High-capacitance wOscillating iIC Code Oscillating B Area Expansion mode Code IC 16 Applicable IC Control code eStructure/Size oPackaging Code Structure/Size Cp/Kp Chip Type Code Packaging Lp Lead Type -B0 Bulk -R0 Embossed Taping o=180mm -R1 Embossed Taping o=330mm -M0 Magazine p is "A" or subsequent code, which indicates the size. It varies depending on vibration mode and number of elements. rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Capital letter "K" following three figures expresses the unit of "kHz". Magazine cassette is applied to lead type and embossed taping to chip type. With non-standard products, one letter indicating "Individual Specification" is added between "iApplicable IC" and "oPackage Specification code". tDetection Code Detection C Quadrature Detection yApplication Application Code A Standard L Application with coil Ceramic Discriminators for IF (MHz) (Part Number) CD S CB 10M7 GF 001 -R0 q w e t y r u qProduct ID tProduct Specification Product ID CD Discriminators Code Product Specification GF Two-digit alphanumerics express type, center frequency, rank, others wOscillation Code Oscillation S Thickness Shear mode yIC Code IC 001 Applicable IC Control Code eStructure/Size Code Structure/Size Cp Chip Type p is expressed "A" or subsequent code, which indicates the size. rNominal Center Frequency uPackaging Code Packaging -R0 Embossed Taping o=180mm With non-standard products, an alphanumerics indicating "Individual Specification" is added between "yIC" and "uPackaging". Expressed by four-digit alphanumerics. The unit is in hertz (MHz). Decimal point is expressed by capital letter "M". 3 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Products Guide oSMD Type (kHz) Applications General Use Type Attenuation (dB) min. 6dB Bandwidth (kHz) min. Series A B C D 17.5 15 12.5 10 E F G H J K L 7.5 6 4.5 3 2 1.5 1 Within 45580 or 100kHz SFPKA455KM (4 Elements) - - - o o o o o - - - 27 (G to H ; 25) CFUKG455KM (4 Elements) - - - o o o o - - - - 27 (G ; 25) Narrow Bandwidth GDT Flat Type Miniature Series (Plastic Case Type) CFUKG455KMX (4 Elements) - - - - o o o o - - - 27 (G to H ; 25) GDT Flat Type Miniature Series (Plastic Case Type) CFUKF455KM (4 Elements) o o o o o - - - - - - 25 (D to E ; 23) GDT Flat Type High Selectivity SMD Series (Plastic Case Type) CFWKA450KBFY (6 Elements) - o - - - - - - - - - 45 High Selectivity SMD Series (Plastic Case Type) CFWKA450KM (6 Elements) - - - o o o o - - - - 50 High Selectivity Series (Plastic Case Type) oLead Type (kHz) Applications General Use Type Attenuation (dB) min. 6dB Bandwidth (kHz) min. Series A B C D 17.5 15 12.5 10 E F G H J K L Within 45580 or 100kHz 7.5 6 4.5 3 2 1.5 1 CFULA455KM (4 Elements) High Selectivity Low Profile Series CFWLA455KM (6 Elements) - o o o o o o o - - - 27 (H ; 35) - o o o o o o o o - - 35 (H, J ; 60) High Selectivity Miniature Series CFULB455KM (4 Elements) - o o o o o o o o - - 27 (H, J ; 35) CFWLB455KM (6 Elements) - o o o o o o o o - - 35 (H, J ; 55) GDT Flat Type Series CFULA455KMY (4 Elements) - o o o o o o - - - - 25 (D to G ; 23) CFWLA455KMY (6 Elements) o o o o o o o - - - - 40 GDT Flat Type Miniature Series CFULB455KMY (4 Elements) - o o o o o o - - - - 25 (D to G ; 23) CFWLB455KMY (6 Elements) o o o o o o o - - - - 40 (F ; 35) 4 (G ; 25) (G ; 25) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr) for Communications Equipment 1 CERAFILr kHz SMD Type SFPKA Series 7.50.3 The SFPKA series is comprised of small, high performance, economical, thin (5.0mm) filters consisting of 4 ceramic elements. Their innovative construction is perfect for shrinking mobile communication products such as cordless phones, pagers and transceivers. MARKING EIAJ CODE 5.0 max. 0.90.1 2.00.3 1.50.3 2.00.3 Features Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) Stop Bandwidth (kHz) 1.50.3 1.60.3 Connection (1) : Input (2) : Ground (3) : Output (1) (2) (3) 1. The filters are mountable by automatic placers. 2. The filters can be reflow soldered and withstand washing. 3. They are slim, at only 5.0mm maximum thickness. 4. The bandwidth ranges from D to H. 5. Operating temperature range: -20 to +80 (degrees C) Storage temperature range: -40 to +85 (degrees C) Part Number 8.4 max. 7.00.3 3.00.3 (in mm) Stop Band Attenuation (dB) Insertion Loss (dB) Ripple (dB) Input/Output Impedance (ohm) SFPKA455KD4A-R1 455 1.5kHz fn10.0 min. fn20.0 max. 27 min. 4.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 2.0 max. [within fn7kHz] 1500 SFPKA455KE4A-R1 455 1.5kHz fn7.5 min. fn15.0 max. 27 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 1.5 max. [within fn5kHz] 1500 SFPKA455KF4A-R1 455 1.5kHz fn6.0 min. fn12.5 max. 27 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 1.5 max. [within fn4kHz] 1500 SFPKA455KG1A-R1 455 1.0kHz fn4.5 min. fn10.0 max. 25 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 1.5 max. [within fn3kHz] 1500 SFPKA455KH1A-R1 455 1.0kHz fn3.0 min. fn9.0 max. 35 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 1.5 max. [within fn2kHz] 2000 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 (3) (1) (2) Rg RF Voltmeter E1 R2 E2 S.S.G. 0dBm Rg+R1=R2=Input/Output Impedance E1 : S.S.G. Output Voltage (1) : Input (2) : Ground (3) : Output 5 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Frequency Characteristics SFPKA455KE4A-R1 0 10 360 10 20 320 20 30 280 30 40 240 40 50 200 60 160 70 120 70 80 80 80 90 40 90 0 100 200 430 455 Frequency (kHz) 480 Attenuation (dB) 400 100 6 SFPKA455KE4A-R1 0 G.D.T. (sec.) Attenuation (dB) 1 50 60 300 400 500 600 700 Frequency (kHz) 800 900 1000 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr kHz SMD Type CFUKG Series MARKING EIAJ CODE 1.00.1 4.00.3 6.00.3 1. The filters are mountable by automatic placers. 2. The filters can be reflow soldered and withstand washing. 3. They are slim, at only 4.0mm maximum thickness, and have a small mounting area (7.5x6.0mm) enabling flexible PCB design. 4. The bandwidth ranges from D to G. 5. Operating temperature range: -20 to +80 (degrees C) Storage temperature range: -40 to +85 (degrees C) Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) Stop Bandwidth (kHz) C0.5 1.00.1 1.20.1 4.0 max. 1.00.3 Features Part Number 7.5 max. 6.50.3 The CFUKG series is comprised of small, high performance, thin (4.0mm) filters consisting of 4 ceramic elements. Their innovative construction is perfect for shrinking mobile communication products such as pocket pagers and cellular phones. 2 (1) 1.00.3 1.50.3 3.00.3 1.50.3 Connection (1) : Input (2) : Output (3) : Ground (2) (3) (in mm) Stop Band Attenuation (dB) Insertion Loss (dB) Ripple (dB) Input/Output Impedance (ohm) CFUKG455KD4A-R0 455 1.5kHz fn10.0 min. fn20.0 max. 27 min. 4.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 2.0 max. [within fn7kHz] 1500 CFUKG455KE4A-R0 455 1.5kHz fn7.5 min. fn15.0 max. 27 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 1.5 max. [within fn5kHz] 1500 CFUKG455KF4A-R0 455 1.5kHz fn6.0 min. fn12.5 max. 27 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 1.5 max. [within fn4kHz] 1500 CFUKG455KG1A-R0 455 1.0kHz fn4.5 min. fn10.0 max. 25 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 1.5 max. [within fn3kHz] 1500 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 (1) (2) Rg E1 S.S.G. 0dBm R2 (3) E2 RF Voltmeter Connection (1) : Input (2) : Output (3) : Ground Rg+R1=R2=Input/Output Impedance 7 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Frequency Characteristics CFUKG455KE4A-R0 CFUKG455KE4A-R0 0 2 0 400 10 10 20 20 30 40 40 200 50 60 70 Attenuation (dB) 30 G.D.T. (sec.) Attenuation (dB) 300 50 60 70 100 80 80 90 90 100 430 455 Frequency (kHz) 8 480 0 100 200 300 400 500 600 700 Frequency (kHz) 800 900 1000 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr kHz SMD Type CFUKG_X Series MARKING EIAJ CODE 1.00.1 3 7.5 max. 6.50.3 The CFUKG_X series is comprised of small, high performance, thin (4.0mm) filters consisting of 4 ceramic elements. The filters exhibit an extremely flat GDT characteristic combined with a narrow bandwidth. The filters are recommended for narrow band digital communication applications. C0.5 1.00.3 4.00.3 6.00.3 1.00.3 1.50.3 1.50.3 Features (1) 1. The filters are mountable by automatic placers. 2. The filters can be reflow soldered and withstand washing. 3. They are slim, at only 4.0mm maximum thickness, and have a small mounting area (7.5x6.0mm) enabling flexible PCB design. 4. The bandwidth ranges from E to H. 5. Operating temperature range: -20 to +80 (degrees C) Storage temperature range: -40 to +85 (degrees C) Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) Part Number Stop Bandwidth (kHz) 1.20.1 4.0 max. 1.00.1 3.00.3 Connection (1) : Input (2) : Output (3) : Ground (2) (3) (in mm) Stop Band Attenuation (dB) Insertion Loss (dB) Ripple (dB) GDT Deviation (s) Input/Output Impedance (ohm) CFUKG455KE4X-R0 455 1.5kHz fn7.5 min. fn17.5 max. 27 min. 6.0 max. 1.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn5kHz] 25.0 max. [within fn5kHz] 1500 CFUKG455KF4X-R0 455 1.5kHz fn6.0 min. fn15.0 max. 27 min. 6.0 max. 1.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn4kHz] 25.0 max. [within fn4kHz] 1500 CFUKG455KG1X-R0 455 1.0kHz fn4.5 min. fn12.5 max. 25 min. 6.0 max. 1.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn3kHz] 25.0 max. [within fn3kHz] 1500 CFUKG455KH1X-R0 455 1.0kHz fn3.0 min. fn10.0 max. 25 min. 7.0 max. 1.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn2kHz] 25.0 max. [within fn2kHz] 1500 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 (1) (2) Rg R2 E1 S.S.G. 0dBm (3) E2 RF Voltmeter Connection (1) : Input (2) : Output (3) : Ground Rg+R1=R2=Input/Output Impedance 9 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Frequency Characteristics CFUKG455KE4X-R0 CFUKG455KE4X-R0 0 0 200 10 10 20 20 150 30 40 40 100 50 60 70 Attenuation (dB) 30 G.D.T. (sec.) Attenuation (dB) 3 50 60 70 50 80 80 90 90 100 430 455 Frequency (kHz) 10 480 0 100 200 300 400 500 600 700 Frequency (kHz) 800 900 1000 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr) for Communications Equipment 6.50.3 The CFUKF series is comprised of small, high performance, thin (4.0mm) filters consisting of 4 ceramic elements. The filters exhibit an extremely flat GDT characteristic. The filters are recommended for digital communication applications and are perfect in hand held cellular phones, etc. MARKING EIAJ CODE 1.00.1 4.00.3 6.00.3 4 1.00.3 1.50.3 1.50.3 3.00.3 Connection (1) : Input (2) : Output (3) : Ground (2) (3) 1. The filters are mountable by automatic placers. 2. The filters can be reflow soldered and withstand washing. 3. They are slim, at only 4.0mm maximum thickness, and have a small mounting area (7.5x6.0mm) enabling flexible PCB design. 4. The bandwidth ranges from A to E. 5. Operating temperature range: -20 to +80 (degrees C) Storage temperature range: -40 to +85 (degrees C) Stop Bandwidth (kHz) 1.20.1 4.0 max. 1.00.3 Features Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) C0.5 1.00.1 (1) Part Number 7.5 max. CERAFILr kHz SMD Type CFUKF Series (in mm) Stop Band Attenuation (dB) Insertion Loss (dB) Ripple (dB) GDT Deviation (s) Input/Output Impedance (ohm) CFUKF455KA2X-R0 455 2.0kHz fn17.5 min. fn40.0 max. 25 min. 4.0 max. 1.0 max. 15.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn12kHz] [within fn12kHz] 1000 CFUKF455KB4X-R0 455 1.5kHz fn15.0 min. fn35.0 max. 25 min. 5.0 max. 1.0 max. 15.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn10kHz] [within fn10kHz] 1000 CFUKF455KC4X-R0 455 1.5kHz fn12.5 min. fn30.0 max. 25 min. 6.0 max. 1.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn8kHz] 15.0 max. [within fn8kHz] 1000 CFUKF455KD1X-R0 455 1.0kHz fn10.0 min. fn25.0 max. 23 min. 7.0 max. 1.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn7kHz] 20.0 max. [within fn7kHz] 1500 CFUKF455KE1X-R0 455 1.0kHz fn7.5 min. fn20.0 max. 23 min. 8.0 max. 1.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn5kHz] 20.0 max. [within fn5kHz] 1500 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 (1) (2) Rg R2 E1 S.S.G. 0dBm (3) E2 RF Voltmeter Connection (1) : Input (2) : Output (3) : Ground Rg+R1=R2=Input/Output Impedance 11 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Frequency Characteristics CFUKF455KE1X-R0 CFUKF455KE1X-R0 0 0 200 10 10 20 20 30 40 40 100 50 60 70 Attenuation (dB) 4 30 G.D.T. (sec.) Attenuation (dB) 150 50 60 70 50 80 80 90 90 100 12 430 455 Frequency (kHz) 480 0 100 200 300 400 500 600 700 Frequency (kHz) 800 900 1000 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr) for Communications Equipment MARKING 6.5 The CFWKA series is comprised of small, high performance, thin (3.0mm) filters consisting of 6 ceramic elements. The filters are recommend for pager or hand held cellular phones. EIAJ CODE Dot marking Sealing 1.20.1 1.20.1 3.0max. Features 5.5 3.0 1.50.3 11.5 3.0 1. The filters are mountable by automatic placers. 2. The filters can be reflow soldered. 3. They are slim, at only 3.0mm maximum thickness. 4. The filters are wide bandwidth, flat GDT within pass band. 5. Operating temperature range: -20 to +80 (degrees C) Storage temperature range: -40 to +85 (degrees C) Nominal Center 3dB Frequency (fn) Bandwidth (kHz) (kHz) Part Number 7.5 max. CERAFILr kHz SMD Type CFWKA Series C0.3 1.20.1 1.20.1 5.5 3.0 1.50.3 Sealing 5 (1) (4) (1) : Input (2) : Output (3)(4): Ground (2) (3) ( Tolerance 0.3mm in mm ) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Stop Band Att.(2) (dB) Insertion Loss (dB) Ripple (dB) Input/Output Impedance (ohm) CFWKA450KDFA-R0 450.0 - fn10.0 min. fn20.0 max. [within 50dB] 50 min. [within fn100kHz] - 4.0 max. [at minimum loss point] 3.0 max. [within fn7kHz] 1500 CFWKA450KEFA-R0 450.0 - fn7.5 min. fn15.0 max. [within 50dB] 50 min. [within fn100kHz] - 6.0 max. [at minimum loss point] 3.0 max. [within fn5kHz] 1500 CFWKA450KEFA001-R0 450.0 fn6.5 min. - fn15.0 max. [within 50dB] 55 min. [fn18 to 33kHz] 50 min. [within fn100kHz] 4.0 max. [at fn] 3.0 max. [within fn6.5kHz] 1500 CFWKA450KFFA-R0 450.0 - fn6.0 min. fn12.5 min. [within 50dB] 50 min. [within fn100kHz] - 6.0 max. [at minimum loss point] 3.0 max. [within fn4kHz] 1500 CFWKA450KGFA-R0 450.0 - fn4.5 min. fn11.0 max. [within 50dB] 50 min. [within fn100kHz] - 6.0 max. [at minimum loss point] 2.0 max. [within fn3kHz] 1500 For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 Rg (1) (2) (4) (3) R2 E1 S.S.G. 0dBm E2 RF Voltmeter Connection (1) : Input (2) : Output (3)(4) : Ground Rg+R1=R2=Input/Output Impedance 13 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Frequency Characteristics CFWKA450KEFA001-R0 0 CFWKA450KEFA001-R0 0 400 10 4 20 8 30 16 40 200 20 24 28 Attenuation (dB) 12 G.D.T. ( sec.) Attenuation (dB) 300 50 60 70 100 5 32 80 36 90 40 0 440.0 450.0 100 460.0 430 Frequency (kHz) CFWKA450KEFA001-R0 0 10 20 Attenuation (dB) 30 40 50 60 70 80 90 100 200 300 400 500 600 700 Frequency (kHz) 14 455 Frequency (kHz) 800 900 1000 480 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr) for Communications Equipment Y50 B1 6.5 The CFWKA_Y series is comprised of small, high performance, thin (3.0mm) filters consisting of 6 ceramic elements. The filters are recommend for digital communication applications and are perfect in hand held cellular phones. 7.5 max. CERAFILr kHz SMD Type CFWKA_Y Series EIAJ CODE Dot marking Sealing 1.20.1 3.0 max. 1.20.1 5.5 3.0 1.50.3 11.5 3.0 C0.3 1.20.1 1.20.1 5.5 3.0 1.50.3 Sealing Features (1) (4) 1. The filters are mountable by automatic placers, and can be reflow soldered. 2. They are slim, at only 3.0mm maximum thickness. 3. The filters are wide bandwidth, flat GDT within pass band. 4. Operating temperature range: -20 to +80 (degrees C) Storage temperature range: -40 to +85 (degrees C) Nominal Center 3dB Frequency (fn) Bandwidth (kHz) (kHz) Part Number CFWKA450KBFY001-R0 450.0 6dB Bandwidth (kHz) Stop Bandwidth (kHz) fn13.0 min. fn30.0 max. [within 50dB] fn11.5 min. (2) (3) (1) : Input (2) : Output (3)(4): Ground ( Tolerance 0.3mm in mm ) Stop Band Attenuation (dB) Insertion Loss (dB) Spurious Response (dB) 45 min. 4.0 max. 20 min. [within fn100kHz] [at minimum loss point] [within 0.1 to 1.0MHz] GDT Deviation (s) Input/Output Impedance (ohm) 30.0 max. [within fn10kHz] 1000 For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 Rg (1) (2) (4) (3) R2 E1 S.S.G. 0dBm E2 RF Voltmeter Connection (1) : Input (2) : Output (3)(4) : Ground Rg+R1=R2=Input/Output Impedance 15 6 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Frequency Characteristics 0 0 200 10 2 4 20 30 8 40 10 100 12 14 Attenuation (dB) 6 G.D.T. ( sec.) Attenuation (dB) 150 50 60 70 50 16 80 18 90 20 6 0 420 430 440 450 460 Frequency (kHz) 16 470 480 100 200 300 400 500 600 700 Frequency (kHz) 800 900 1000 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. kHz SMD Type CERAFILr Notice SFPKA/CFUKG/CFUKF Series Notice (Soldering and Mounting) 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Peak (260C max.) Temperature (C) 260 230 Heating (230C) Pre-heating 100 (150-180C) 30 sec. min. 60-120 sec. Gradual Cooling 40 sec. max. 120 sec. min. 6 (2) Soldering Iron Electrode is directly soldered with the tip of soldering iron at +3505C for 3.00.5 seconds. 2. Wash (1) Cleaning Solvent CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA), Water (Demineralized Water), Cleaning Water Solution (Cleanthrough-750H, Pine Alpha 100S), Silicon (Technocare FRW) (2) Cleaning Conditions Immersion Wash 2 minutes max. in above solvent at +60C max. Shower or Rinse Wash 2 minutes max. in above solvent at +60C max. (3) Notice When components are immersed in solvent, be sure to maintain the temperature of components below the temperature of solvent. Please do not use ultrasonic cleaning. Total washing time should be within 4 minutes. Please ensure the component is thoroughly evaluated in your application circuit. Please do not use chlorine, petroleum and alkaline cleaning solvents. If you plan to use any other type of solvents, please consult with Murata or Murata representative prior to using. Continued on the following page. 17 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. kHz SMD Type CERAFILr Notice Continued from the preceding page. CFWKA Series Notice (Soldering and Mounting) 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Peak (260C max.) Temperature (C) 260 240 Heating (240C) Pre-heating 100 (150-180C) 30 sec. min. 6 60-120 sec. Gradual Cooling 30 sec. max. 120 sec. min. (2) Soldering Iron Electrode is directly soldered with the tip of soldering iron at +3505C for 3.00.5 seconds. 2. Wash The component cannot withstand washing. SFPKA/CFUKG/CFUKF Series Notice (Handling) 1. The component will be damaged when an excessive stress is applied. 2. In the case that the component is cleaned, confirm that no reliability degradation is created. 3. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 4. Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. CFWKA Series Notice (Handling) 1. The component will be damaged when an excessive stress is applied. 2. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 3. Do not clean or wash the component as it's not hermetically sealed. 4. Do not apply conformal coating onto the component as it's not hermetically sealed. 5. Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. 18 5. The product, packed in the moisture-proof bag (dry pack), is sensitive to moisture. The following treatment is required before applying re-flow soldering, to avoid package cracks or reliability degradation caused by thermal stress. When unpacked, store the component in an atmosphere of below 25 degree C and below 65%R.H., and solder within 48 hours. 6. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr MHz SMD Type SFECF10M7 Series 1.30.1 SFECF10M7 series for FM-receivers are small, high performance and super thin (1.4mm max.) filters. Piezoelectric element is connected in the sandwich shape by ceramics substrate. They have 1.4mm max. thickness and small mounting area. (3.45x3.1mm) SFECF series and CDSCB series (MHz Discriminator) enable customers to make VICS/RKE/TPMS set so thin and small sized. 3.10.2 3.450.2 Input electrode marker 0 to 0.4 (0.6) (0.6) (0.6) 0 to 0.4 (1.28)(1.28) 0.3 min. 0.3 min. (1) (6) (2) (3) (5) (4) (1.28)(1.28) 0 to 0.35 Features 0.750.3 0.850.3 0.850.3 0.650.3 0.70.3 0.650.3 (1) : (2)(5) : (3)(4) : (6) : : ( ): Input Ground No connect Output EIAJ Monthly Code Reference (in mm) 0 to 0.35 1. The filters are mountable by automatic placers. 2. They are slim, at only 1.4mm max. thickness, and have a small mounting area (3.45x3.1mm) enabling flexible PCB design. 3. Various bandwidths are available. Select a suitable type in accordance with the desired selectivity. 4. Operating Temperature Range: -20 to +80 (degrees C)(Standard Type) -40 to +85 (degrees C)(High-reliability Type) Storage Temperature Range: -40 to +85 (degrees C)(Standard Type) -55 to +85 (degrees C)(High-reliability Type) 7 Standard Type Part Number Center Nominal Center 3dB Attenuation Insertion Loss Frequency Frequency (fn) Bandwidth (kHz) (dB) (fo) (MHz) (MHz) (kHz) Ripple (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFECF10M7HA00-R0 10.700 30kHz - 180 40kHz 470 max. 4.0 2.0dB 1.0 max. 30 min. 30 min. [within 9MHz to fo] [within fo to 12MHz] 330 SFECF10M7HF00-R0 - 10.700 fn25 min. 510 max. 8.0 max. [at fn] 1.0 max. 30 min. 25 min. [within 9MHz to fn] [within fn to 12MHz] 330 SFECF10M7GA00-R0 10.700 30kHz - 230 50kHz 510 max. 3.5 2.0dB 1.0 max. 30 min. 30 min. [within 9MHz to fo] [within fo to 12MHz] 330 SFECF10M7GF00-R0 - 10.700 fn45 min. 560 max. 8.0 max. [at fn] 1.0 max. 30 min. 25 min. [within 9MHz to fn] [within fn to 12MHz] 330 SFECF10M7FA00-R0 10.700 30kHz - 280 50kHz 590 max. 3.0 2.0dB 1.0 max. 30 min. 30 min. [within 9MHz to fo] [within fo to 12MHz] 330 SFECF10M7FF00-R0 - 10.700 fn65 min. 620 max. 7.0 max. [at fn] 1.0 max. 30 min. 25 min. [within 9MHz to fn] [within fn to 12MHz] 330 SFECF10M7EA00-R0 10.700 30kHz - 330 50kHz 700 max. 3.0 2.0dB 1.0 max. 30 min. 30 min. [within 9MHz to fo] [within fo to 12MHz] 330 SFECF10M7DA0001-R0 10.700 30kHz - 420 min. 950 max. 3.0 2.0dB 3.0 max. 35 min. 25 min. [within 9MHz to fo] [within fo to 12MHz] 330 - 10.700 fn150 min. 990 max. 6.0 max. [at fn] 3.0 max. 20 min. 20 min. [within 9MHz to fn] [within fn to 12MHz] 330 SFECF10M7DF00-R0 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W. Center frequency (fo) defined by center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. 19 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. High-reliability Type Center Nominal Center 3dB Attenuation Insertion Loss Frequency Frequency (fn) Bandwidth (kHz) (dB) (fo) (MHz) (MHz) (kHz) Part Number Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFECF10M7HA00S0-R0 10.700 30kHz - 180 40kHz 470 max. 4.0 2.0dB 1.0 max. 30 min. 30 min. [within 9MHz to fo] [within fo to 12MHz] 330 SFECF10M7HF00S0-R0 - 10.700 fn25 min. 510 max. 8.0 max. [at fn] 1.0 max. 30 min. 25 min. [within 9MHz to fn] [within fn to 12MHz] 330 SFECF10M7GA00S0-R0 10.700 30kHz - 230 50kHz 510 max. 3.5 2.0dB 1.0 max. 30 min. 30 min. [within 9MHz to fo] [within fo to 12MHz] 330 SFECF10M7GF00S0-R0 - 10.700 fn45 min. 560 max. 8.0 max. [at fn] 1.0 max. 30 min. 25 min. [within 9MHz to fn] [within fn to 12MHz] 330 SFECF10M7FA00S0-R0 10.700 30kHz - 280 50kHz 590 max. 3.0 2.0dB 1.0 max. 30 min. 30 min. [within 9MHz to fo] [within fo to 12MHz] 330 SFECF10M7FF00S0-R0 - 10.700 fn65 min. 630 max. 7.0 max. [at fn] 1.0 max. 30 min. 25 min. [within 9MHz to fn] [within fn to 12MHz] 330 SFECF10M7EA00S0-R0 10.700 30kHz - 330 50kHz 700 max. 3.0 2.0dB 1.0 max. 30 min. 30 min. [within 9MHz to fo] [within fo to 12MHz] 330 SFECF10M7DF00S0-R0 - 10.700 fn145 min. 990 max. 6.0 max. [at fn] 3.0 max. 20 min. 20 min. [within 9MHz to fn] [within fn to 12MHz] 330 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W. Center frequency (fo) defined by center of 3dB bandwidth. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit (3) (4) (2) (5) R1 (1) (6) Rg E1 C2 R2 E2 RF Voltmeter S.S.G. Rg = 50 R1 = 280 5% R2 = 330 5% C2 = 10 2 pF (Including stray capacitance and Input capacitance of RF Volt Meter) E1 : S.S.G. Output Voltage (1) : Input (2)(5) : Ground (3)(4) : No connect (6) : Output Frequency Characteristics SFECF10M7FA00-R0 0 1 6.0 10 2 5.0 20 3 4.0 4 3.0 5 2.0 50 6 1.0 60 7 10.500 10.700 Frequency (MHz) 10.900 0.0 11.100 Attenuation (dB) 7.0 10.300 20 SFECF10M7FA00-R0 0 G.D.T. (sec.) Attenuation (dB) 7 Spurious Attenuation (1) (dB) Ripple (dB) 30 40 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr MHz SMD Type SFSCE10M7 Series 4.5 * 3.8 (4.0) (4-R0.3) Features (0.3) (1.8) 1. The filters are mountable by automatic placers. 2. They are slim, at only 1.0mm max. thickness, and have a small mounting area (4.5x3.8mm) enabling flexible PCB design. 3. Available lead (Pb) free solder reflow. 4. Operating temperature range: -20 to +80 (degrees C) Storage temperature range: -40 to +85 (degrees C) (4) (3) (1) (2) (2.25) 0.6 1.1 0.85 0.15 1.0 max. (3) (4) (1) : Input (2) : Output (3) : No Connect (4) : Ground * : EIAJ Monthly Code Tolerance unless otherwise specified : 0.1 ( ) : Reference 0.15 (in mm) 0.3 SFSCE series are chip surface mount filter and available for 3dB bandwidth at 700kHz to 1.3MHz. (more than twice width compared with current types) They have 1.0mm max. thickness and small mounting area. (4.5x3.8mm) 0.4 (2) (3.5) (1) 8 Applications 1. SS digital communication system 2. Digital wireless audio 3. PHS Evolution system 4. RFID Reader Writer 5. RKE Part Number Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) Stop Bandwidth (MHz) Insertion Loss (dB) SFSCE10M7WF03-R0 10.700 fn500.0 min. 2.2 max. (Total) 6.0 max. 2.0 max. 30/25 min. 0.6 max. [within 20dB] [at minimum loss point] [within 3dB Bandwidth] [within 5.7MHz to fn / fn to 15.7MHz] [within fn400kHz] 470 SFSCE10M7WF04-R0 10.700 fn400.0 min. 1.8 max. (Total) 6.0 max. 1.5 max. 35/25 min. 0.6 max. [within 20dB] [at minimum loss point] [within 3dB Bandwidth] [within 5.7MHz to fn / fn to 15.7MHz] [within fn325kHz] 470 SFSCE10M7WF05-R0 10.700 fn325.0 min. 1.7 max. (Total) 6.0 max. 1.5 max. 40/30 min. 0.6 max. [within 20dB] [at minimum loss point] [within 3dB Bandwidth] [within 5.7MHz to fn / fn to 15.7MHz] [within fn250kHz] 470 Ripple (dB) Spurious Response (dB) GDT Deviation (s) Input/Output Impedance (ohm) For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit (4) (3) (1) (2) R1 Rg R2 S.S.G. C2 RF Voltmeter (1) : Input (2) : Output (3) : No Connect (4) : Ground R1+Rg=R2=Input/Output Impedance, Rg=50 C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1 : S.S.G. Output Voltage 21 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Frequency Characteristics SFSCE10M7WF03-R0 SFSCE10M7WF03-R0 0 2.0 2 1.6 0 1.2 6 0.8 8 0.4 Attenuation (dB) 4 G.D.T. (sec.) Attenuation (dB) 20 40 60 10 9.500 8 22 9.900 10.300 10.700 11.100 Frequency (MHz) 11.500 0.0 11.900 80 6.700 8.700 10.700 Frequency (MHz) 12.700 14.700 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz SMD Type CERAFILr Notice SFECF10M7 Series Notice (Soldering and Mounting) Temperature (C) 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Peak (260C max.) 260 230 Pre-heating (150-180C) 100 Heating (230C) Gradual Cooling 30 sec. min. 60-120 sec. 40 sec. max. 120 sec. min. (2) Soldering Iron Filter is soldered at +3505C for 3.00.5 seconds. The soldering iron should not touch the filter while soldering. 8 2. Wash The component cannot withstand washing. SFSCE10M7WF03-R0 Notice (Soldering and Mounting) 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Peak (240C max.) Temperature (C) 240 230 Heating (230C) Pre-heating 100 (150-180C) 30 sec. min. 60-120 sec. Gradual Cooling 30 sec. max. 120 sec. min. (2) Soldering Iron Filter is soldered at +3205C for 3.00.5 seconds. The soldering iron should not touch the filter while soldering. 2. Wash The component cannot withstand washing. Continued on the following page. 23 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz SMD Type CERAFILr Notice Continued from the preceding page. SFSCE10M7WF04/05-R0 Notice (Soldering and Mounting) 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Peak (260C max.) Temperature (C) 260 230 Heating (230C) Pre-heating 100 (150-180C) 30 sec. min. 60-120 sec. Gradual Cooling 40 sec. max. 120 sec. min. (2) Soldering Iron Filter is soldered at +3205C for 3.00.5 seconds. The soldering iron should not touch the filter while soldering. 8 2. Wash The component cannot withstand washing. Continued on the following page. 24 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz SMD Type CERAFILr Notice Continued from the preceding page. SFECF10M7 Series Notice (Handling) 1. The component will be damaged when an excessive stress is applied. 2. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 3. Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. 4. After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. 5. The component may be damaged during mounting process if some part of mounter such as positioning claws or nozzle are worn down. The regular maintenance recommended for mounters should be done to prevent trouble. 6. The component is recommended with placement machines which employ optical placement capabilities. The component might be damaged by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. 7. When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. Depending on the soldering conditions, the effective area of terminations may be reduced. The use of solder containing Ag should be done to prevent the electrode erosion. 8. Do not clean or wash the component as it is not hermetically sealed. 9. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 10. Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. 11. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 12. The components, packed in the moisture proof bag (dry pack), are sensitive to moisture. The following treatment is required before applying re-flow soldering. To avoid reliability degradation caused by thermal stress, when unpacked, store the component in an atmosphere at 30C and below 60%R.H., and solder within 1 week. 13. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. [Component Layout Close to Board] Perforation B A Slit C Susceptibility to stress is in the order of : A>C>B 8 Continued on the following page. 25 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz SMD Type CERAFILr Notice Continued from the preceding page. SFSCE10M7 Series Notice (Handling) 8 1. The component will be damaged when an excessive stress is applied. 2. The component mounted on the PCB may be damaged if excess mechanical stress is applied. 3. Layout the components on the PCB to minimize the stress imposed on the warp or flexure of the board. 4. After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. 5. The component may be damaged during mounting process if some part of mounter such as positioning claws, nozzle are worn down. The regular maintenance recommended for mounters should be done to prevent the trouble. 6. When correcting component's position with a soldering iron, the tip of the soldering iron should not directly touch the chip component. 7. Do not clean or wash the component as it is not hermetically sealed. 8. In case of overcoating the part, coating conditions such as material of resin, curing temperature, and so on should be evaluated carefully. 9. Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. 10. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 11. The component is recommended with placement machines which employ optical placement capabilities. The component might be damaged by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. 12. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 26 [Component direction] Put the component laterally to the direction in which stress acts. [Component layout close to board] Perforation A Susceptibility to stress is in the order of : A>C>B B Slit C PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SMD Type CERAFILr Standard Land Pattern Dimensions SFPKA Series CFUKG/CFUKF Series 0.7 1.2 0.8 6.95 2.0 0.7 1.4 1.2 2.0 0.9 1.1 0.925 2.0 1.55 3.5 7.45 2.0 1.6 2.475 2.0 (in mm) (in mm) SFECF10M7 Series 3.0 (6) (5) (4) 8 (2) (3) 0.1 2.1 1.6 0.5 1.05 (1) 4-R3.0 0.1 6.5 7.5 0.3 0.1 1.40 0.3 1.2 1.05 11.5 5.5 3.0 0.1 0.3 0.1 CFWKA Series 0.1 0.8 0.6 0.8 0.6 1.8 (in mm) It shows solder resist land pattern. 0.8 (1) : Input (2)(5) : Ground (3)(4) : No connect (6) : Output (in mm) SFSCE10M Series 1.05 1.4 0.1 (4) 0.5 1.15 0.8 1.3 (3) 0.1 0.1 (2) (1) 0.5 It shows solder resist land pattern. (1) : Input (2) : Output (3) : No Connect (4) : Ground (in mm) 27 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. kHz SMD Type CERAFILr Packaging Minimum Quantity Part Number o180mm o330mm SFPKA 1,000 CFUKG 450 CFUKF 450 CFWKA 350 SFPKA Series Dimensions of Carrier Tape Trailer 160 to 190 1.750.1 Empty Leader Cover film Components Empty 240 to 280 o13.00.2 801 3302 400 to 560 8.80.1 7.50.1 2.00.1 +0.1 o1.5 -0 16.00.2 4.00.1 Dimensions of Reel 2.20.5 12.00.1 User direction of feed 5.30.1 Cover film Label 17.50.5 8 21.51.0 7.40.1 * Part number marked side is always facing upside. (in mm) CFUKG/CFUKF Series Dimensions of Carrier Tape 8.00.1 6.70.1 User direction of feed Cover film (o180+0 -3.0 ) (o60 +1.0 -0 ) 7.70.1 8.10.1 Empty 16.00.2 o1.5 +0.1 -0.0 6.760.1 7.50.1 2.00.1 Trailer 160 to 190 1.750.1 4.00.1 Dimensions of Reel Leader Cover film Components 2.00.2 o13.00.5 Empty 160 to 200 400 to 560 4.20.1 17.01.0 19.40.3 6.30.1 * Part number marked side is always facing upside. (in mm) Continued on the following page. 28 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. kHz SMD Type CERAFILr Packaging Continued from the preceding page. CFWKA Series Dimensions of Carrier Tape 1.750.1 Trailer 160 to 190 (o1782.0) (o62.01.0) 12.00.1 Empty 12.40.1 11.50.1 o1.5 +0.1 -0.0 24.00.3 4.00.1 2.00.1 Dimensions of Reel Leader Cover film Components 2.00.2 o13.00.5 Empty 240 to 280 400 to 560 25.51.0 0.40.1 12.00.1 8.10.1 7.70.1 29.91.0 3.20.1 User direction of feed Cover film * Part number marked side is always facing upside. (in mm) 8 29 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz SMD Type CERAFILr Packaging Minimum Quantity Part Number o330mm o180mm SFECF 2,000 SFSCE 1,500 SFECF10M7 Series Dimensions of Carrier Tape Dimensions of Reel Cover film (3) 10 max. 8 3 max. Leader Cover film Components Empty 240 to 280 400 to 560 180 +0 -1.5 o13.00.5 60 +1.0 -0 12.00.2 5.50.05 Empty 2.00.5 4.10.1 Peeling strength (0.1 to 0.7N) +0.1 3.35 -0.05 (0.05) 4.00.1 0.30.05 4.10.1 Chip filter 1.840.1 o1.550.05 2.00.05 Trailer 160 to 190 1.750.1 4.00.1 17.01.0 13.0 +1.0 -0 User direction of feed ( ) : Reference (in mm) * Part number marked side is always facing upside. SFSCE10M7 Series Dimensions of Reel Trailer 160 to 190 4.00.1 Leader Cover film 0.30.05 o1.550.05 Empty 5.00.1 3 max. 2.00.05 o13.00.5 1.10.1 8.00.1 Components Empty 240 to 280 400 to 560 180 +0 -1.5 12.00.2 5.50.05 1.750.1 Dimensions of Carrier Tape 2.00.5 Peeling strength 0.1 to 0.7N Cover film 4.30.1 (3) 10 max. 0.05 0.30.05 o1.550.05 17.01.0 13.0 +1.0 -0 User direction of feed * Part Number marked side is always facing upside. (in mm) 30 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr Plastic Case General Use CFULA Series 8.00.3 2.70.3 1. High selectivity 2. A variety of bandwidths available 3. Excellent GDT characteristics are available within pass bandwidth. 4. Easily mounted on a printed circuit board 5. Operating temperature range: -20 to +80 (degrees C) Storage temperature range: -40 to +85 (degrees C) (2) 7.00.3 0.80.1 3.00.3 0.150.05 Features 1.20.5 (1) (3) 4.20.3 1.5 max. 7.30.3 EIAJ CODE 0.30.1 CFULA series are high selectivity ceramic filters, which consist of 4 ceramic elements connected in a ladder form. Most suitable for digital communications and cellular phones because of their improved GDT characteristics. MARKING 3.30.5 0.60.1 Connection (1) : Input (2) : Ground (3) : Output (in mm) Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) Input/Output Impedance (ohm) CFULA455KB2A-B0 455 2.0kHz fn15.0 min. fn30.0 max. [within 40dB] 27 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFULA455KC2A-B0 455 2.0kHz fn12.5 min. fn24.0 max. [within 40dB] 27 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFULA455KD4A-B0 455 1.5kHz fn10.0 min. fn20.0 max. [within 40dB] 27 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFULA455KE4A-B0 455 1.5kHz fn7.5 min. fn15.0 max. [within 40dB] 27 min. [within fn100kHz] 6.0 max. [at minimum loss point] 1500 CFULA455KF4A-B0 455 1.5kHz fn6.0 min. fn12.5 max. [within 40dB] 27 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 CFULA455KG1A-B0 455 1.0kHz fn4.5 min. fn10.0 max. [within 40dB] 25 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 CFULA455KH1A-B0 455 1.0kHz fn3.0 min. fn9.0 max. [within 40dB] 35 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 Part Number 9 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 Rg E1 (3) (1) (2) R2 S.S.G. 0dBm E2 RF Voltmeter Connection (1) : Input (2) : Ground (3) : Output Rg+R1=R2=Input/Output Impedance 31 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Frequency Characteristics CFULA455KE4A-B0 CFULA455KE4A-B0 0 0 200 10 10 20 20 30 40 40 100 50 60 Attenuation (dB) 30 G.D.T. (sec.) Attenuation (dB) 150 50 60 70 70 50 80 80 90 90 100 430 455 Frequency (kHz) 9 32 480 0 100 200 300 400 500 600 700 Frequency (kHz) 800 900 1000 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr Plastic Case General Use CFWLA Series MARKING 7.50.5 EIAJ CODE 2.90.3 1. Low profile, high selectivity 2. Available bandwidths are B to J as standard 3. Easily mountable on any PC board 4. Operating temperature range: -20 to +80 (degrees C) Storage temperature range: -40 to +85 (degrees C) Part Number Nominal Center 6dB Frequency (fn) Bandwidth (kHz) (kHz) Stop Bandwidth (kHz) 0.80.1 3.50.5 0.15 Features 2.60.3 2.90.3 2.9-- 2.9 --0.3 (4) (3) Stop Band Attenuation (dB) (2) (1) (5) Insertion Loss (dB) 4.30.3 1.350.5 1.20.5 2.30.5 1.5 max. Ceramic filter CFWLA series are low profile high selectivity ceramic filters which use 6 elements in ladder form. They are best suitable to high-class transceivers, cordless telephones and amateur radios. 7.00.5 11.00.5 0.60.1 Connection (1) : Input (2)(3)(4) : Ground (5) : Output (in mm) 2.00.3 Ripple (dB) Input/Output Impedance (ohm) CFWLA455KBFA-B0 455.0 fn15.0 min. fn30.0 max. 35 min. 4.0 max. 3.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] [within fn10kHz] 1500 CFWLA455KCFA-B0 455.0 fn12.5 min. fn24.0 max. 35 min. 4.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 3.0 max. [within fn8kHz] 1500 CFWLA455KDFA-B0 455.0 fn10.0 min. fn20.0 max. 35 min. 4.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 3.0 max. [within fn7kHz] 1500 CFWLA455KEFA-B0 455.0 fn7.5 min. fn15.0 max. 35 min. 6.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 3.0 max. [within fn5kHz] 1500 CFWLA455KFFA-B0 455.0 fn6.0 min. fn12.5 max. 35 min. 6.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 3.0 max. [within fn4kHz] 2000 CFWLA455KGFA-B0 455.0 fn4.5 min. fn10.0 max. 35 min. 6.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 2.0 max. [within fn3kHz] 2000 CFWLA455KHFA-B0 455.0 fn3.0 min. fn9.0 max. 60 min. 6.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 2.0 max. [within fn2kHz] 2000 CFWLA455KJFA-B0 455.0 fn2.0 min. fn7.5 max. 60 min. 7.0 max. 2.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] [within fn1.5kHz] 10 2000 For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit (5) R1 (1) (2) (3) (4) R2 Rg E1 S.S.G. 0dBm E2 RF Voltmeter Connection (1) : Input (5) : Output (2)(3)(4) : Ground Rg+R1=R2=Input/Output Impedance 33 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Frequency Characteristics CFWLA455KEFA-B0 CFWLA455KEFA-B0 0 400 0 10 10 20 20 30 40 40 200 50 60 70 Attenuation (dB) 30 G.D.T. (sec.) Attenuation (dB) 300 50 60 70 100 80 80 90 90 100 430 455 Frequency (kHz) 10 34 480 0 100 200 300 400 500 600 700 Frequency (kHz) 800 900 1000 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr Plastic Case Miniaturized Type CFULB Series MARKING 0.150.05 (1) (3) Features 1. Miniature and high selectivity 2. A variety of bandwidths are available 3. Operating temperature range: -20 to +80 (degrees C) Storage temperature range: -40 to +85 (degrees C) 0.50.1 4.30.3 0.80.3 1.80.3 0.70.3 Connection (1) : Input (2) : Output (3) : Ground (4) 1.00.3 2.40.3 0.70.1 3.50.3 6.30.3 EIAJ CODE 1.0 max. CFULB series ceramic filters are miniature, high performance ceramic filters composed of piezoelectric elements connected in a ladder form. These filters, only 6.3mm high, are 65% the volume of conventional types. They are well suited for miniaturizing various kinds of communications equipment, pocket pagers, car radios, cordless telephones and mobile telephones. 6.50.3 6.50.3 (in mm) (2) (4) } Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) Input/Output Impedance (ohm) CFULB455KB2A-B0 455 2.0kHz fn15.0 min. fn30.0 max. [within 40dB] 27 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFULB455KC2A-B0 455 2.0kHz fn12.5 min. fn24.0 max. [within 40dB] 27 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFULB455KD4A-B0 455 1.5kHz fn10.0 min. fn20.0 max. [within 40dB] 27 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFULB455KE4A-B0 455 1.5kHz fn7.5 min. fn15.0 max. [within 40dB] 27 min. [within fn100kHz] 6.0 max. [at minimum loss point] 1500 CFULB455KF4A-B0 455 1.5kHz fn6.0 min. fn12.5 max. [within 40dB] 27 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 CFULB455KG1A-B0 455 1.0kHz fn4.5 min. fn10.0 max. [within 40dB] 25 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 CFULB455KH1A-B0 455 1.0kHz fn3.0 min. fn9.0 max. [within 40dB] 35 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 CFULB455KJ1A-B0 455 1.0kHz fn2.0 min. fn7.5 max. [within 40dB] 35 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 Part Number 11 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. CFULB455K_series filters are 4-element ceramic filters and miniature versions of CFULA455K_series. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. 35 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Test Circuit R1 (1) (2) (3) (4) Rg E1 R2 RF Voltmeter E2 Connection S.S.G. 0dBm (1) : Input (2) : Output (3)(4) :Ground Rg+R1=R2=Input/Output Impedance Frequency Characteristics CFULB455KE4A-B0 CFULB455KE4A-B0 0 0 200 10 10 20 20 30 40 40 100 50 60 Attenuation (dB) 30 G.D.T. (sec.) Attenuation (dB) 150 50 60 70 70 50 80 80 90 90 100 11 430 455 Frequency (kHz) 36 480 0 100 200 300 400 500 600 700 Frequency (kHz) 800 900 1000 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr Plastic Case Miniaturized Type CFWLB Series 3.50.3 6.30.3 EIAJ CODE 0.150.05 (3) Features (4) (5) 0.70.3 1. Miniature and high selectivity 2. A variety of bandwidths are available. 3. Operating temperature range: -20 to +80 (degrees C) Storage temperature range: -40 to +85 (degrees C) 1.00.3 (2) (1) 4.30.3 2.50.3 2.70.3 2.80.3 0.90.3 1.0 max. CFWLB series ceramic filters are miniature, high performance ceramic filters composed of piezoelectric elements connected in a ladder form. These filters, only 6.3mm high, are 67% the volume of conventional types. They are well suited for miniaturizing various kinds of communications equipment, pocket pagers, pagers, car radios, cordless telephones and mobile telephones. 6.50.3 9.50.3 MARKING 0.70.1 0.50.1 Connection (1) : Input (2) : Output (3) (4) : Ground (5) } (in mm) Nominal Center Frequency (fn) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) Input/Output Impedance (ohm) CFWLB455KBFA-B0 455.0 fn15.0 min. fn30.0 max. [within 50dB] 35 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFWLB455KCFA-B0 455.0 fn12.5 min. fn24.0 max. [within 50dB] 35 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFWLB455KDFA-B0 455.0 fn10.0 min. fn20.0 max. [within 50dB] 35 min. [within fn100kHz] 4.0 max. [at minimum loss point] 1500 CFWLB455KEFA-B0 455.0 fn7.5 min. fn15.0 max. [within 50dB] 35 min. [within fn100kHz] 6.0 max. [at minimum loss point] 1500 CFWLB455KEFA004-B0 455.0 fn7.5 min. fn15.0 max. [within 60dB] 60 min. [within fn15kHz to 30kHz] 5.0 max. [at fn] 1500 CFWLB455KFFA-B0 455.0 fn6.0 min. fn12.5 max. [within 50dB] 35 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 CFWLB455KGFA-B0 455.0 fn4.5 min. fn10.0 max. [within 50dB] 35 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 CFWLB455KHFA-B0 455.0 fn3.0 min. fn9.0 max. [within 50dB] 55 min. [within fn100kHz] 6.0 max. [at minimum loss point] 2000 CFWLB455KJFA-B0 455.0 fn2.0 min. fn7.0 max. [within 50dB] 55 min. [within fn100kHz] 7.0 max. [at minimum loss point] 2000 Part Number 12 CFWLB455K_series filters are 4-element ceramic filters and miniature versions of CFWLA455K_series. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. 37 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Test Circuit R1 (1) (2) (3) (4) (5) Rg E1 S.S.G. 0dBm R2 RF Voltmeter Connection E2 (1) : Input (2) : Output (3)(4)(5) : Ground Rg+R1=R2=Input/Output Impedance Frequency Characteristics CFWLB455KEFA-B0 CFWLB455KEFA-B0 0 0 200 10 10 20 20 30 40 40 100 50 60 70 Attenuation (dB) 30 G.D.T. (sec.) Attenuation (dB) 150 50 60 70 50 80 80 90 90 100 430 455 Frequency (kHz) 12 38 480 0 100 200 300 400 500 600 700 Frequency (kHz) 800 900 1000 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr Plastic Case Group Delay Flat Type CFULA_Y Series 2.70.3 1. High selectivity 2. A variety of bandwidths are available. 3. Excellent GDT characteristics are available within pass bandwidth. 4. Easily mounted on a printed circuit board 5. Operating temperature range: -20 to +80 (degrees C) Storage temperature range: -40 to +85 (degrees C) Part Number Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) Stop Bandwidth (kHz) (2) (1) (3) 1.20.5 3.30.5 Stop Band Attenuation (dB) Insertion Loss (dB) 0.80.1 3.00.3 0.150.05 Features 4.20.3 1.5 max. 7.30.3 EIAJ CODE 0.30.1 CFULA_Y series are high selectivity ceramic filters, which consist of 4 ceramic elements connected in a ladder form. Most suitable for digital communications and cellular phones because of their improved GDT characteristics. 7.00.3 8.00.3 MARKING GDT Deviation (s) 0.60.1 Connection (1) : Input (2) : Ground (3) : Output (in mm) Input/Output Impedance (ohm) CFULA455KB4Y-B0 455 1.5kHz fn15.0 min. fn35.0 max. 25 min. 5.0 max. 15.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn10kHz] 1500 CFULA455KC4Y-B0 455 1.5kHz fn12.5 min. fn30.0 max. 25 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 15.0 max. [within fn8kHz] 1500 CFULA455KD1Y-B0 455 1.0kHz fn10.0 min. fn25.0 max. 23 min. 7.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 20.0 max. [within fn7kHz] 1500 CFULA455KE1Y-B0 455 1.0kHz fn7.5 min. fn20.0 max. 23 min. 8.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 20.0 max. [within fn5kHz] 1500 CFULA455KF1Y-B0 455 1.0kHz fn6.0 min. fn17.5 max. 23 min. 9.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 20.0 max. [within fn4kHz] 2000 CFULA455KG1Y-B0 455 1.0kHz fn4.5 min. fn15.0 max. 23 min. 10.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 20.0 max. [within fn3kHz] 2000 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. 13 Test Circuit R1 Rg E1 (3) (1) (2) R2 S.S.G. 0dBm E2 RF Voltmeter Connection (1) : Input (2) : Ground (3) : Output Rg+R1=R2=Input/Output Impedance 39 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Frequency Characteristics CFULA455KE1Y-B0 CFULA455KE1Y-B0 0 0 200 10 10 20 20 150 30 100 50 60 40 Attenuation (dB) Attenuation (dB) 40 Group Delay Time (sec) 30 50 60 70 70 50 80 80 90 90 100 0 430 455 Frequency (kHz) 13 40 480 100 200 300 400 500 600 700 Frequency (kHz) 800 900 1000 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr Plastic Case Group Delay Flat Type CFWLA_Y Series MARKING 7.50.5 EIAJ CODE 0.80.1 3.50.5 0.15 2.90.3 2.60.3 2.90.3 2.9-- 2.9 --0.3 Features Part Number Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) Stop Bandwidth (kHz) (4) (3) 2.30.5 Stop Band Attenuation (dB) (2) (5) Insertion Loss (dB) (1) 4.30.3 1.350.5 1.20.5 1. High selectivity 2. A variety of bandwidths are available 3. Excellent GDT characteristics are available within pass bandwidth. 4. Easily mounted on a printed circuit board 5. Operating temperature range: -20 to +80 (degrees C) Storage temperature range: -40 to +85 (degrees C) 1.5 max. CFWLA_Y series are high selectivity ceramic filters, which consist of 6 ceramic elements connected in a ladder form. Most suitable for digital communications and mobile telephones because of their improved GDT characteristics. 7.00.5 11.00.5 0.60.1 Connection (1) : Input (2)(3)(4) : Ground (5) : Output (in mm) 2.00.3 GDT Deviation (s) Input/Output Impedance (ohm) CFWLA455KB4Y-B0 455 1.5kHz fn15.0 min. fn30.0 max. 40 min. 6.0 max. 30.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] [within fn10kHz] 1500 CFWLA455KC4Y-B0 455 1.5kHz fn12.5 min. fn27.5 max. 40 min. 7.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 30.0 max. [within fn8kHz] 1500 CFWLA455KD1Y-B0 455 1.0kHz fn10.0 min. fn25.0 max. 40 min. 8.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 30.0 max. [within fn7kHz] 1500 CFWLA455KE1Y-B0 455 1.0kHz fn7.5 min. fn20.0 max. 40 min. 9.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 30.0 max. [within fn5kHz] 1500 CFWLA455KF1Y-B0 455 1.0kHz fn6.0 min. fn17.5 max. 40 min. 10.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 40.0 max. [within fn4kHz] 2000 CFWLA455KG1Y-B0 455 1.0kHz fn4.5 min. fn15.0 max. 40 min. 11.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 40.0 max. [within fn3kHz] 2000 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. 14 Test Circuit (5) R1 (1) (2) (3) (4) R2 Rg E1 S.S.G. 0dBm E2 RF Voltmeter Connection (1) : Input (5) : Output (2)(3)(4) : Ground Rg+R1=R2=Input/Output Impedance 41 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Frequency Characteristics CFWLA455KE1Y-B0 CFWLA455KE1Y-B0 0 0 400 10 10 20 20 300 30 200 50 60 40 Attenuation (dB) Attenuation (dB) 40 Group Delay Time (sec) 30 50 60 70 70 100 80 80 90 90 100 0 430 455 Frequency (kHz) 14 42 480 100 200 300 400 500 600 700 Frequency (kHz) 800 900 1000 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr Plastic Case Group Delay Flat Type Miniaturized Type CFULB_Y Series MARKING 0.150.05 1. Miniature, flat GDT characteristics 2. Suitable for a cellular phone 3. A variety of bandwidths are available. 4. Operating temperature range: -20 to +80 (degrees C) Storage temperature range: -40 to +85 (degrees C) Part Number Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) Stop Bandwidth (kHz) 0.80.3 1.80.3 0.70.3 (1) (2) (3) Stop Band Attenuation (dB) Insertion Loss (dB) (4) 0.50.1 4.30.3 2.40.3 Connection (1) : Input (2) : Output (3) : Ground (4) 1.00.3 Features 0.70.1 3.50.3 6.30.3 EIAJ CODE 1.0 max. Ceramic filter CFULB_Y series are miniature and high performance filters. These filters, only 6.3mm high, are 65% the volume of conventional types. Well suited for miniaturizing communications equipment, especially for a cellular phone. 6.50.3 6.50.3 (in mm) GDT Deviation (s) } Input/Output Impedance (ohm) CFULB455KB4Y-B0 455 1.5kHz fn15.0 min. fn35.0 max. 25 min. 5.0 max. 15.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] [within fn10kHz] 1500 CFULB455KC4Y-B0 455 1.5kHz fn12.5 min. fn30.0 max. 25 min. 6.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 15.0 max. [within fn8kHz] 1500 CFULB455KD1Y-B0 455 1.0kHz fn10.0 min. fn25.0 max. 23 min. 7.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 20.0 max. [within fn7kHz] 1500 CFULB455KE1Y-B0 455 1.0kHz fn7.5 min. fn20.0 max. 23 min. 8.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 20.0 max. [within fn5kHz] 1500 CFULB455KF1Y-B0 455 1.0kHz fn6.0 min. fn17.5 max. 23 min. 9.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 20.0 max. [within fn4kHz] 2000 CFULB455KG1Y-B0 455 1.0kHz fn4.5 min. fn15.0 max. 23 min. 10.0 max. [within 40dB] [within fn100kHz] [at minimum loss point] 20.0 max. [within fn3kHz] 2000 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. CFULB455K_Y series filters are 4-element ceramic filters and miniature versions of CFULA455K_Y series. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 15 (1) (2) (3) (4) Rg E1 R2 S.S.G. 0dBm E2 RF Voltmeter Connection (1) : Input (2) : Output (3)(4) :Ground Rg+R1=R2=Input/Output Impedance 43 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Frequency Characteristics CFULB455KE1Y-B0 CFULB455KE1Y-B0 0 0 200 10 10 20 20 150 30 100 50 60 40 Attenuation (dB) Attenuation (dB) 40 Group Delay Time (sec) 30 50 60 70 70 50 80 80 90 90 100 0 430 455 Frequency (kHz) 15 44 480 100 200 300 400 500 600 700 Frequency (kHz) 800 900 1000 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr Plastic Case Group Delay Flat Type CFWLB_Y Series 3.50.3 6.30.3 EIAJ CODE 0.150.05 Part Number Center 6dB Frequency (fo) Bandwidth (kHz) (kHz) Stop Bandwidth (kHz) (3) (4) (5) 0.70.3 Stop Band Attenuation (dB) Insertion Loss (dB) 1.00.3 (2) (1) 1. Miniature, flat GDT characteristics 2. Suitable for a cellular phone 3. A variety of bandwidths are available. 4. Operating temperature range: -20 to +80 (degrees C) Storage temperature range: -40 to +85 (degrees C) 4.30.3 2.50.3 2.70.3 2.80.3 0.90.3 Features GDT Deviation (s) 1.0 max. Ceramic filter CFWLB_Y series are miniature and high-performance filters. These filters, only 6.3mm high, are 67% the volume of conventional types. Well suited for miniaturizing communications equipment, especially for a cellular phone. 6.50.3 9.50.3 MARKING 0.70.1 0.50.1 Connection (1) : Input (2) : Output (3) (4) : Ground (5) } (in mm) Input/Output Impedance (ohm) CFWLB455KB4Y-B0 455 1.5kHz fn15.0 min. fn30.0 max. 40 min. 6.0 max. 30.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] [within fn10kHz] 1500 CFWLB455KC4Y-B0 455 1.5kHz fn12.5 min. fn27.5 max. 40 min. 7.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 30.0 max. [within fn8kHz] 1500 CFWLB455KD1Y-B0 455 1.0kHz fn10.0 min. fn25.0 max. 40 min. 8.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 30.0 max. [within fn7kHz] 1500 CFWLB455KE1Y-B0 455 1.0kHz fn7.5 min. fn20.0 max. 40 min. 9.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 30.0 max. [within fn5kHz] 1500 CFWLB455KF1Y-B0 455 1.0kHz fn6.0 min. fn17.5 max. 35 min. 10.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 40.0 max. [within fn4kHz] 2000 CFWLB455KG1Y-B0 455 1.0kHz fn4.5 min. fn15.0 max. 40 min. 11.0 max. [within 50dB] [within fn100kHz] [at minimum loss point] 40.0 max. [within fn3kHz] 2000 Center frequency (fo) defined by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. CFWLB455K_Y series filters are 4-element ceramic filters and miniature versions of CFWLA455K_Y series. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit R1 (1) (2) (3) (4) (5) Rg S.S.G. 0dBm E1 R2 E2 RF Voltmeter Connection 16 (1) : Input (2) : Output (3)(4)(5) : Ground Rg+R1=R2=Input/Output Impedance 45 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Frequency Characteristics CFWLB455KE1Y-B0 CFWLB455KE1Y-B0 0 200 0 10 10 20 20 150 30 100 50 60 40 Attenuation (dB) Attenuation (dB) 40 Group Delay Time (sec) 30 50 60 70 70 50 80 80 90 90 100 430 455 Frequency (kHz) 16 46 480 0 100 200 300 400 500 600 700 Frequency (kHz) 800 900 1000 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Plastic Case Type CERAFILr Minimum Quantity/Notice Minimum Quantity Part Number Bulk Magazine CFULA Series 200 CFULB Series 250 80 CFWLA Series 150 50 CFWLB Series 150 55 The order quantity should be an integral multiple of the "Minimum Quantity" shown above. (pcs.) Notice (Handling) 1. Do not use this product with bend. The component may be damaged if excessive mechanical stress is applied to it mounted on the printed circuit board. 2. The component will be damaged when an excessive stress is applied. 3. All kinds of re-flow soldering must not be applied on the component. 4. Do not clean or wash the component as it is not hermetically sealed. 5. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 6. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 7. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 8. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 16 47 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Discriminators for Communications Equipment kHz Type Ceramic Discriminators 6.00.2 6.20.2 MARKING 6.60.3 Ceramic discriminator consists of wide band piezoelectric resonator. It is ideal for mobile communications equipment due to its small size and light weight. Standard line include products for wide range of applications, from cordless telecom to cellular telephone. Practically adjustment free at the detection circuit, small size is suitable for downsizing. EIAJ CODE 3.1 max. 1.00.1 3.70.2 1.50.3 1.150.2 CDBKB Series Features (in mm) 3.50.3 1. Small in size and light weight 2. Adjustment free at detection circuit 3. High sensitivity and stability 4. Wide range of standard products are available for various ICs. 5. Operating temperature range: -20 to +80 (degrees C) Storage temperature range: -40 to +85 (degrees C) 7.00.3 1.5 max. 9.00.3 MARKING 3.50.5 EIAJ CODE 1.750.5 0.10.05 CDBLA Series 0.250.05 0.80.1 1.10.1 (in mm) 5.00.2 6.00.2 6.00.2 3.00.3 4.20.2 0.50.1 CDBLB_CAY Series 4.20.2 0.90.2 (in mm) 0.90.2 6.3 max. 6.0 max. 4.20.5 EIAJ CODE 0.150.05 1.00.3 1.50.3 6.3 max. MARKING 0.50.2 CDBLB_CAX Series 0.150.05 1.80.2 0.60.2 0.50.1 6.0 max. EIAJ CODE 4.20.5 MARKING 3.00.3 (in mm) Specified by Impedance Characteristics (Type 1) Part Number 17 Nominal Center Inclination of Inclination of Capacitance Frequency (fn) Impedance Curve (1) Impedance Curve (2) (C) (kHz) IC IC Maker Type CDBLB455KCAX02-B0 455 447.01.5kHz (at |Z|=2.05kohm) 463.01.5kHz (at |Z|=10.0kohm) 140pF20% TA8104F TOSHIBA Lead CDBLB455KCAX31-B0 455 447.01.5kHz (at |Z|=2.05kohm) 463.01.5kHz (at |Z|=10.0kohm) 140pF20% TA31141 TOSHIBA Lead For safety purposes, avoid applying a direct current between the terminals. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. 48 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Impedance Curve CDBLB455KCAX02-B0 CDBLB455KCAX31-B0 500K 500K 180 180 100K 100K 50K 50K 0 1K 5K 0 1K -90 500 100 50 400 10K Phase (deg) 5K Impedance () 10K 90 Phase (deg) Impedance () 90 100 -180 420 440 460 Frequency (kHz) 480 -90 500 50 400 500 -180 420 440 460 Frequency (kHz) 480 500 Specified by Impedance Characteristics (Type 2) Nominal Center Anti-resonant Frequency (fn) Frequency (Fa) Part Number Delta F (Fa-Fr) Resonant Capacitance Resistance (R) (C) IC IC Maker Type CDBKB455KCAX33-R0 - 462.01.5kHz 404.0kHz 200ohm max. 150pF20% CXA1474 SONY SMD CDBLA455KCAY03-B0 - 455.01.5kHz 485.0kHz 70ohm max. 600pF20% CXA1184M SONY Lead CDBLB455KCAY03-B0 - 455.01.5kHz 465.0kHz 70ohm max. 550pF20% CXA1184M SONY Lead CDBLB455KCAX15-B0 - 463.51.0kHz 432.0kHz 300ohm max. 140pF20% CXA1183M SONY Lead CDBLB455KCAX25-B0 - 465.01.5kHz 454.0kHz 300ohm max. 135pF20% CXA1484 SONY Lead CDBLB455KCAX33-B0 - 465.01.5kHz 454.0kHz 300ohm max. 135pF20% CXA1474 SONY Lead For safety purposes, avoid applying a direct current between the terminals. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Impedance Curve CDBLA/CDBLB455KCAY03-B0 CDBLB455KCAX15-B0 500K 100K 180 180 50K 100K 50K 10K 90 90 10K 5K 0 Phase (deg) Impedance () 0 1K 500 Phase (deg) Impedance () 5K 17 1K -90 100 -90 500 50 -180 10 380 400 420 440 Frequency (kHz) 460 480 100 50 390 -180 410 430 450 Frequency (kHz) 470 490 Continued on the following page. 49 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. Impedance Curve CDBLB455KCAX25-B0 500K CDBKB455KCAX33-R0 100K 50K 10K 0 5K 1K 420 440 460 Frequency (kHz) 480 -180 500 50 400 CDBLB455KCAX33-B0 180 100K 90 10K 5K 0 1K -90 500 100 420 440 460 Frequency (kHz) 480 -180 500 Phase (deg) 50K Impedance () 5K 0 -90 100 500K 50 10K 500 100 17 90 1K -90 500 50 400 Impedance () 90 Phase (deg) Impedance () 50K 420 440 460 Frequency (kHz) 480 -180 500 Phase (deg) 100K 50 400 180 500K 180 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Specified by Recovered Audio Characteristics Part Number Nominal Center Recovered Frequency (fn) Audio 3dB BW (kHz) (kHz) Recovered Audio Output (mV) Distortion (at fn) (%) Distortion (%) IC IC Maker Type CDBKB450KCAY79-R0 450 fn3.0 min. 145 40 - - TB32302FG TOSHIBA SMD CDBKB455KCAY07-R0 455 fn4.0 min. 350 60 3.0 max. - MC3357 MOTOROLA SMD CDBKB455KCAY09-R0 455 fn4.0 min. 120 40 1.5 max. - NE604N PHILIPS SMD CDBKB455KCAY13-R0 455 fn4.0 min. 330 50 4.0 max. - CXA1003BM SONY SMD CDBKB455KCAY16-R0 455 fn4.0 min. 175 40 2.0 max. - MC3372 MOTOROLA SMD CDBKB455KCAY24-R0 455 fn4.0 min. 100 40 2.0 max. - TA31136 TOSHIBA SMD CDBKB455KCAY27-R0 455 fn4.0 min. 90 30 2.0 max. - TK10487 TOKO SMD CDBKB455KCAY28-R0 455 fn4.0 min. 40 20 3.0 max. - TA31142F TOSHIBA SMD CDBKB455KCAY29-R0 455 fn4.0 min. 100 30 2.5 max. - NE605 PHILIPS SMD CDBKB455KCAY35-R0 455 fn4.0 min. 100 40 2.5 max. - TK10930 TOKO SMD CDBKB455KCAY40-R0 455 fn4.0 min. 40 20 3.5 max. - TA31145 TOSHIBA SMD CDBKB455KCAY49-R0 455 fn4.0 min. 45 10 3.0 max. - MC3361 MOTOROLA SMD CDBKB455KCAY50-R0 455 fn4.0 min. 64 6.4 4.0 max. - CXA3117N SONY SMD CDBKB455KCAY66-R0 455 fn4.2 min. 40 10 4.0 max. - NJM2590 JRC SMD CDBKB455KCLX36-R0 455 fn13.0 min. 90 30 2.5 max. 5.0 max. [within fn 6kHz] NE(SA)606 /NE(SA)616 PHILIPS SMD CDBKB455KCLX39-R0 455 fn11.0 min. 130 20 2.5 max. 7.0 max. [within fn 8kHz] NE607 /NE617 PHILIPS SMD CDBKB455KCLY13-R0 455 fn13.0 min. 120 30 1.5 max. 5.0 max. [within fn 8kHz] CXA1003BM SONY SMD CDBLA455KCAY07-B0 455 fn4.0 min. 340 60 2.5 max. - MC3357 MOTOROLA Lead CDBLA455KCAY09-B0 455 fn5.0 min. 100 min. 1.5 max. - NE604N PHILIPS Lead CDBLA455KCAY13A-B0 455 fn4.0 min. 350 50 3.0 max. - CXA1003BM SONY Lead CDBLA455KCAY16-B0 455 fn4.0 min. 185 40 2.0 max. - MC3372 MOTOROLA Lead CDBLA455KCAY24-B0 455 fn4.0 min. 100 40 2.0 max. - TA31136 TOSHIBA Lead CDBLA455KCAY28-B0 455 fn4.0 min. 40 20 3.0 max. - TA31142 TOSHIBA Lead CDBLA455KCAY34-B0 455 fn4.0 min. 65 20 2.5 max. - MC13136 MOTOROLA Lead CDBLA455KCLY09-B0 455 fn15.0 min. 70 20 1.5 max. 3.5 max. [within fn 8kHz] NE604N PHILIPS Lead CDBLA455KCLY13-B0 455 fn15.0 min. 110 30 1.5 max. 5.0 max. [within fn 8kHz] CXA1003BM SONY Lead CDBLB455KCAY07-B0 455 fn4.0 min. 340 60 3.0 max. - MC3357 MOTOROLA Lead Continued on the following page. 51 17 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. Nominal Center Recovered Frequency (fn) Audio 3dB BW (kHz) (kHz) Part Number Recovered Audio Output (mV) Distortion (at fn) (%) Distortion (%) IC IC Maker Type CDBLB455KCAY13A-B0 455 fn4.0 min. 350 50 3.0 max. - CXA1003BM SONY Lead CDBLB455KCAY24-B0 455 fn4.0 min. 100 40 2.0 max. - TA31136 TOSHIBA Lead CDBLB455KCAY28-B0 455 fn4.0 min. 40 20 3.0 max. - TA31142FN TOSHIBA Lead CDBLB455KCAY34-B0 455 fn4.0 min. 65 20 2.5 max. - MC13136 MOTOROLA Lead CDBLB455KCAY40-B0 455 fn4.0 min. 40 20 3.0 max. - TA31145 TOSHIBA Lead CDBLB455KCAY42-B0 455 fn4.0 min. 40 15 3.0 max. - TK14590 /TK14591 TOKO Lead CDBLB455KCAY49-B0 455 fn4.0 min. 45 10 3.0 max. - MC3361 MOTOROLA Lead CDBLB455KCAY50-B0 455 fn4.0 min. 64 6.4 4.0 max. - CXA3117N SONY Lead CDBLB455KCLY09-B0 455 fn15.0 min. 70 20 1.5 max. 3.5 max. [within fn 8kHz] NE604N PHILIPS Lead CDBLB455KCLY13-B0 455 fn15.0 min. 110 30 1.5 max. 5.0 max. [within fn 8kHz] CXA1003BM SONY Lead CDBLB455KCAX16-B0 455 fn4.0 min. 185 40 2.0 max. - MC3372 MOTOROLA Lead CDBLB455KCAX18-B0 455 fn3.0 min. 180 40 2.0 max. - MC3371 MOTOROLA Lead CDBLB455KCAX36-B0 455 fn3.5 min. 100 25 3.5 max. - NE606 /NE616 PHILIPS Lead For safety purposes, avoid applying a direct current between the terminals. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Test Circuit MC3357 NE604N 8.2k IF input AF output 14 1 2 3 13 12 11 10 9 6 0.1 7 8 0.1 MC3357 4 0.022 16 50 Vcc FM S. S. G. (Rg = 50) 5 10 + Part Number (X) CDBLB455KCAY07-B0 CDBKB455KCAY07-R0 14 C 47k 1 X 13 12 11 10 9 6 7 8 NE604 2 3 4 5 C R 0.1 CDBLA455KCAY07-B0 15 0.1 Unit C : F R: C R 150pF 1.5k 150pF 1.3k X Vcc 100p Part Number (X) C R L CDBLA455KCAY09-B0 120pF 1.8k - CDBKB455KCAY09-R0 CDBLA455KCLY09-B0 120pF 560 220H CDBLB455KCLY09-B0 1000p + 47 100p 15 0.01 0.01 16 0.1 10k R L 0.01 AF output Unit C : F R: Continued on the following page. 17 52 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. Test Circuit CXA1003BM MC3372 IF input L 0.01 0.01 0.01 0.01 0.01 X 0.01 23 22 21 20 19 18 17 16 15 14 15 14 1 2 3 4 5 6 7 0.01 Part Number (X) C R L CDBLA455KCAY13A-B0 - 82pF 1.2k CDBLB455KCAY13A-B0 - CDBKB455KCAY13-R0 82pF 1.0k CDBLA455KCLY13-B0 CDBLB455KCLY13-B0 82pF 560 220H CDBKB455KCLY13-R0 12 11 10 8 9 10 11 0.01 4 5 6 7 8 0.1 51k C 12 Vcc 51k 68p 1.8k 220p 100 100 0.1 X C R 100pF 1.3k CDBLB455KCAX16-B0 27pF 4.3k CDBKB455KCAY16-R0 100pF 1.0k CDBLA455KCAX16-B0 Unit C : F R: TA31136 RF input + 10 0.1 0.01 Part Number (X) (Rg = 50) FM S. S. G 510k 51k Unit C : F R: R 0.01 AF output Vcc MC3371 51 9 13 2700p 3 AF output 13 MC3372 0.01 2 8.2k 0.01 16 CXA1003BM 1 510k 51k 0.01 C 24 0.1 51 R X C 8.2k R 1 + AF output AF output 16 0.01 13 12 11 10 3 4 5 6 7 0.1 2 Vcc 68p 220p 14 13 12 11 10 9 6 7 8 0.01 TA31136F Vcc (+2.0V) MC3371 1 15 9 1 Test condition Vcc = +4.0V R = 6.2k X : CDBLB455KCAX18-B0 8 X 2 3 4 + 10 5 0.1 14 0.01 15 0.1 16 Unit C : F R: R 0.1 Part Number (X) IF input 0.01 CDBLA455KCAY24-B0 CDBLB455KCAY24-B0 IF input CDBKB455KCAY24-R0 Unit C : F R: TK10487 + 430 16 15 14 13 12 11 TK10487 4 5 6 7 8 Vcc X 0.01 Vcc 20 19 18 17 1 2 3 4 16 15 14 3300p 13 12 11 8 9 10 TA31142F 9 10 C 0.1 3 0.1 2 + 10 R + 10 Part Number (X) C CDBKB455KCAY27-R0 68k 6 7 Vcc 0.01 C X 10 IF input 1.0k AF output + 0.01 R 33pF 5 0.1 Unit C : F R: 2k 0.01 Unit C : F R: R Part Number (X) + CDBLA455KCAY28-B0 CDBLB455KCAY28-B0 CDBKB455KCAY28-R0 NE605 C R 22pF 3.3k 22pF 2.7k MC13136 IF input AF input 0.01 0.1 0.1 0.15 1k 20 19 18 17 16 15 14 13 12 R 24 23 22 21 20 19 18 17 16 15 8 9 10 14 13 11 12 17 C MC13136 6 22k + 22 7 8 0.1 9 10 Vcc 1 2 3 4 5 6 7 X R + 0.1 0.01 0.1 5 0.01 4 100k 150p 3 5n 2 0.1 1 100k Vcc X C 11 NE605 100k 1 1.2k 68k 68k 0.01 0.1 17 560p 2SC1048 10 18 91pF Vcc 2.2 0.01 19 R 1.5k TA31142 8.2k 20 C 91pF 0.1 0.1 0.1 Part Number (X) CDBKB455KCAY29-R0 C R 56pF 2.2k Part Number (X) AF output Unit C : F R: CDBLA455KCAY34-B0 CDBLB455KCAY34-B0 C R 100pF 1.2k IF input Unit C : F R: Continued on the following page. 53 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. Test Circuit TK10930 NE(SA)606/616 IF input 24 23 22 21 20 19 18 17 16 15 14 13 TK10930 8 Vcc 9 C 20 19 X R2 8.2k 0.01 Vcc 1 2 0.1 0.1 Part Number (X) C R1 R2 33pF 2.0k 1.0k 15 2 3 4 5 6 +10 13 7 8 12 L - CDBKB455KCLX36-R0 27pF 2.2k 1mH + 2.2 11 430 C 9 1.5k 8.2k 20 19 18 10 7 8 9 10 C 20k + X 2.2 L 2k 8.2k AF output R 0.1 Unit C : F R: 17 16 15 14 13 1 X L 2 3 4 5 + 10 R C R L CDBKB455KCLX39-R0 22pF 2.7k 1mH 11 6 9 10 0.01 68k 7 8 + X R + 0.1 AF output Part Number (X) 12 3300p TA31145 (TOSHIBA) 0.1 0.1 IF input Unit C : F R: L:H AF output TK14590/14591 Unit C : F R: Part Number (X) R CDBLB455KCAY40-B0 3.3k CDBKB455KCAY40-R0 2.7k MC3361 Vcc (1.3V) AF output 0.01 100k 1 100k 100p 0.01 11 0.1 0.1 14 0.01 0.01 12 0.1 R 22k Vcc 13 TA31145 NE607/617 (PHILIPS) 1 0.1 100k 16 14 6 4.7k 100k 17 5 C 0.1 18 4 22pF 10 19 3 Part Number (X) 0.1 20 15 Vcc 0.01 51 16 CDBLB455KCAX36-B0 NE(SA)607/617 IF input 17 + 2.2 Unit C : F R: IF input CDBKB455KCAY35-R0 18 NE606 or NE616 R1 + 10 AF output 10 11 12 0.1 5600p 7 68k 6 68k 5 560p 4 1000p 3 0.1 2 0.1 1 0.01 0.1 0.15 0.1 1000p 0.1 24 23 22 21 20 19 18 17 16 15 14 13 16 TK14590V (TOKO) 5 6 0.1 7 8 X 100k IF input 1k 14 13 12 11 10 9 6 8 MC3361 1 2 3 4 5 7 0.01 Unit C : F R: 560p 0.0033 R 15 AF output 8.2k 9 10 11 12 C 100k 4 0.01 100k 3 0.1 2 0.1 1 100k 150k Vcc 0.1 0.1 22 47 0.01 1 X 0.1 0.022 Part Number (X) C R CDBLB455KCAY42-B0 22pF 3.3k IF input CXA3117 Unit C : F R: R Part Number (X) R CDBLB455KCAY49-B0 1.8k CDBKB455KCAY49-R0 1.5k NJM2590 Vcc + 100k AF out 24 23 22 21 20 19 18 17 16 15 14 13 100k 10 14 13 12 11 10 9 8 CXA3117(SONY) 17 1 2 3 4 5 6 7 1 Vcc X 33 0.01 8 1200p NJM2590(JRC) 9 10 11 12 1 1200p 1200p R 0.1 Unit C : F R: Part Number (X) R CDBLB455KCAY50-B0 8.2k CDBKB455KCAY50-R0 6.2k S.G. 51 2 5 4 3 0.1 6 7 10k R X + 10 Unit C : F R: 0.01 AF output 54 Part Number (X) R CDBKB455KCAY66-R0 3.0k PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Recovered Audio Curve 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 440 470 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 450 460 Frequency (kHz) AF Output Voltage (mV) 500 440 470 440 CDBLA/CDBLB455KCLY09-B0 450 460 Frequency (kHz) 470 CDBKB455KCAY13-R0 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 395 435 475 Frequency (kHz) 515 AF Output Voltage (mV) 500 T.H.D. (%) AF Output Voltage (mV) 470 CDBLA455KCAY09-B0 T.H.D. (%) AF Output Voltage (mV) CDBKB455KCAY09-R0 450 460 Frequency (kHz) T.H.D. (%) 450 460 Frequency (kHz) 440 450 460 Frequency (kHz) T.H.D. (%) 440 AF Output Voltage (mV) 500 T.H.D. (%) CDBLA/CDBLB455KCAY07-B0 T.H.D. (%) AF Output Voltage (mV) CDBKB455KCAY07-R0 17 470 Continued on the following page. 55 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. Recovered Audio Curve 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 440 485 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 435 475 Frequency (kHz) AF Output Voltage (mV) 500 395 515 440 450 460 Frequency (kHz) 470 CDBLB455KCAX16-B0 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 440 450 460 Frequency (kHz) 470 AF Output Voltage (mV) 500 T.H.D. (%) AF Output Voltage (mV) CDBLA455KCAY16-B0 17 470 CDBKB455KCAY16-R0 T.H.D. (%) AF Output Voltage (mV) CDBLA/CDBLB455KCLY13-B0 450 460 Frequency (kHz) T.H.D. (%) 445 465 Frequency (kHz) 440 450 460 Frequency (kHz) T.H.D. (%) 425 AF Output Voltage (mV) 500 T.H.D. (%) CDBLA/CDBLB455KCAY13A-B0 T.H.D. (%) AF Output Voltage (mV) CDBKB455KCLY13-R0 470 Continued on the following page. 56 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. Recovered Audio Curve 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 470 440 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 450 460 Frequency (kHz) AF Output Voltage (mV) 500 440 470 440 CDBKB455KCAY28-R0 450 460 Frequency (kHz) 470 CDBLA/CDBLB455KCAY28-B0 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 440 450 460 Frequency (kHz) 470 AF Output Voltage (mV) 500 T.H.D. (%) AF Output Voltage (mV) 470 CDBKB455KCAY27-R0 T.H.D. (%) AF Output Voltage (mV) CDBLA/CDBLB455KCAY24-B0 450 460 Frequency (kHz) T.H.D. (%) 450 460 Frequency (kHz) 440 450 460 Frequency (kHz) T.H.D. (%) 440 AF Output Voltage (mV) 500 T.H.D. (%) CDBKB455KCAY24-R0 T.H.D. (%) AF Output Voltage (mV) CDBLB455KCAX18-B0 17 470 Continued on the following page. 57 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. Recovered Audio Curve 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 470 440 450 460 Frequency (kHz) CDBKB455KCLX36-R0 50.0 100 10.0 50 5.0 10 1.0 5 0.5 1 0.1 440 450 460 Frequency (kHz) 5 0.5 1 0.1 425 445 465 486 100 10.0 50 5.0 10 1.0 5 0.5 1 0.1 AF Output Voltage (mV) CDBKB455KCLX39-R0 T.H.D. (%) AF Output Voltage (mV) 1 10 Frequency ( kHz ) 50.0 500 50.0 100 10.0 50 5.0 10 1.0 5 0.5 1 0.1 425 450 460 Frequency (kHz) 5 50 470 500 440 10 100 CDBLB455KCAX36-B0 17 50 500 AF Output Voltage ( mV ) 500 T.H.D. (%) AF Output Voltage (mV) CDBKB455KCAY35-R0 470 T.H.D. (%) 450 460 Frequency (kHz) 470 445 465 T. H. D. (%) 440 AF Output Voltage (mV) 500 T.H.D. (%) CDBLA/CDBLB455KCAY34-B0 T.H.D. (%) AF Output Voltage (mV) CDBKB455KCAY29-R0 485 Frequency (kHz) Continued on the following page. 58 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. Recovered Audio Curve CDBLB455KCAY40-B0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 0.1 470 440 450 460 Frequency (kHz) 500 50.0 100 10.0 50 5.0 10 1.0 5 0.5 1 0.1 AF Output Voltage (mV) CDBKB455KCAY49-R0 T.H.D. (%) AF Output Voltage (mV) CDBLB455KCAY42-B0 500 50.0 100 10.0 50 5.0 10 1.0 5 0.5 1 0.1 440 440 450 460 Frequency (kHz) 470 450 460 470 Frequency (kHz) CDBLB455KCAY49-B0 CDBKB455KCAY50-R0 50.0 500 50.0 100 10.0 100 10.0 50 5.0 50 5.0 10 1.0 10 1.0 5 0.5 5 0.5 1 0.1 1 440 0.1 450 460 Frequency (kHz) 470 AF Output Voltage (mV) 500 T. H. D. (%) AF Output Voltage (mV) 470 T. H. D. (%) 450 460 Frequency (kHz) 440 450 460 T. H. D. (%) 440 T.H.D. (%) 50.0 AF Output Voltage (mV) 500 T.H.D. (%) AF Output Voltage (mV) CDBKB455KCAY40-R0 17 470 Frequency (kHz) Continued on the following page. 59 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. Recovered Audio Curve CDBKB455KCAY66-R0 10.0 50 5.0 10 1.0 5 0.5 1 0.1 440 450 460 500 50.0 100 10.0 50 5.0 10 1.0 5 0.5 1 0.1 440 470 450 460 T. H. D. (%) 100 T. H. D. (%) 50.0 AF Output Voltage (mV) 500 AF Output Voltage (mV) CDBLB455KCAY50-B0 470 Frequency (kHz) Frequency (kHz) Specified by S Curve Characteristics Nominal Center S Curve (1) Frequency (fn) Output Volt. at fn (kHz) (mV) Part Number CDBKB455KCAY54-R0 165 20 455 Test Circuit S Curve (2) at fn4.8kHz (mV) IC IC Maker Type 170 20 TA31149 TOSHIBA SMD S Curve TA31149 CDBKB455KCAY54-R0 24 23 22 21 10 + 100k 20 19 1000p Vcc Vcc Vcc 430 100k + 0.4 100k 2.2 Vcc (W1.4V) 18 17 16 15 14 13 0.3 TA31149(TOSHIBA) IF input 8 9 10 11 12 X R 0.1 Volt (V) 7 + AF output 6 1000p 5 1200p 4 1500p 3 10 2 0.1 1 0.2 Unit C : F R: Part Number (X) R CDBKB455KCAY54-R0 2.7k 0.1 0.0 440 450 460 Frequency (kHz) 17 60 470 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Discriminators for Communications Equipment 0.30.2 MHz Type Ceramic Discriminators 0.20.2 1.4 max. 4.50.1 2.00.1 CDSCB10M7 series forms a resonator on a piezoelectric ceramic substrate. In combination with ICs, this type obtains stable demodulation characteristics in a wide bandwidth. They have 1.0mm max. thickness and small mounting area (4.5x2.0mm). 0.40.05 1.0 max. 4.1 max. 0.4(ref.) 0.4(ref.) 0.80.1 0.80.1 Features 1. Compact and high reliability and recommended for automotive applications. 2. Can be combined with various ICs. The IC is determined by the last number in the part number. 3. Stable demodulation characteristics can be obtained without adjustment. 4. Stable temperature characteristics 5. Available lead (Pb) free solder reflow. CDSCB Series 1.50.1 1.50.1 (in mm) Part Number Center Frequency (fo) (MHz) Recovered Audio 3dB BW (kHz) Recovered Audio Output (mV) Distortion (%) S Curve (mV) IC CDSCB10M7GA105A-R0 10.700 30kHz 220 min. 110 min. 1.5 max. - TEA5757HL CDSCB10M7GA113-R0 10.700 30kHz 300 min. 110 min. 1.0 max. - TA2154FN CDSCB10M7GA119-R0 10.700 30kHz 500 min. 75 min. 1.0 max. - TRF6901 CDSCB10M7GA121-R0 10.700 30kHz 390 min. 80 min. 1.0 max. - LV23100V CDSCB10M7GA135-R0 10.700 30kHz 155 min. 75 min. - - TH71101 CDSCB10M7GA136-R0 10.700 30kHz 140 min. 120 min. - - TH7122 CDSCB10M7GF072-R0 10.700 (fn) fn150 min. 130 min. 2.0 max. - TA31161 CDSCB10M7GF107S-R0 10.700 (fn) fn80 min. 52 min. 3.0 max. - TA31272FN CDSCB10M7GF109-R0 10.700 (fn) fn100 min. 170 min. 3.0 max. - TK14588V CDSCB10M7GF123-R0 10.700 (fn) - - - 900 min. TA31275FN CDSCB10M7GF123S-R0 10.700 (fn) - - - 900 min. TA31275FN CDSCB10M7GF126-R0 10.700 (fn) - - - 400 min. NJM2295AV (fn) means nominal center frequency. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. For safety purposes, avoid applying a direct current between the terminals. 18 61 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Test Circuit CDSCB10M7GA105A-R0 CDSCB10M7GA113-R0 Vcc (1.2V) 35 3 34 4 33 5 32 6 100k 28 0.01 27 26 25 24 23 22 21 20 19 18 17 16 11 12 13 14 15 TA2154FN (TOSHIBA) 1 2 3 4 5 6 7 8 9 10 + X 30 8 29 9 28 10 27 11 26 12 DC OUT 29 31 TEA5757HL (PHILIPS) 7 30 S.S.G. 2.2 680p 2 0.01 + 100 0.01 10 + 48 47 46 45 44 43 42 41 40 39 38 37 0.1 1 36 0.01 0.1 0.01 Vcc (3.0V) D.C. OUT AF OUT X : CDSCB10M7GA113-R0 Unit C : F R: S.S.G. 10 25 0.47 0.1 + X AFC (n) 0.22 150 AF OUT X : CDSCB10M7GA105A-R0 Unit C : F R: CDSCB10M7GA119-R0 CDSCB10M7GA121-R0 Vcc (3.0V) IF Input LV23100V (SANYO) 1 34 32 TRF6901 31 7 (TEXAS INSTRUMENTS) 30 8 29 9 28 100p 10 27 11 26 12 25 13 14 15 16 17 18 19 20 21 22 23 24 0.01 6 + 7 8 9 10 11 12 13 14 15 16 17 18 0.047 + 47p + 0.47 0.01 10k 6 5 10k 10 1000p 33 5 4 X 3 3 1 35 2 X 3.3k 0.1 + 1 0.22 0.47 0.047 + S.G. 100p 10k 100 2 4 + PIC16F84 (Control IC) PIC16F84 1 2 3 4 5 1k 6 7 1 8 2 3 4 5 6 7 8 9 9 X : CDSCB10M7GA119-R0 Unit C : F R: L:H 10k + 2.2 10k 18 17 16 15 14 13 12 11 10 18 17 16 15 14 13 12 11 10 0.1 1k 2.2 X : CDSCB10M7GA121-R0 CDSCB10M7GA135-R0 + 10k 0.1 Unit C : F R: CDSCB10M7GA136-R0 Vcc (5.0V) Vcc (5.0V) AF-OUT FKS-OUT 330p 0.1 0.1 24 23 22 21 20 19 18 17 25 16 26 100p 1000p 0.01 0.01 330k 15 27 28 220k 29 14 TH7122 [Internal AFC Enabled] (MELEXIS) 30 0.01 24 23 22 21 20 19 18 17 25 16 26 15 27 14 31 10 29 0.01 0.01 2 3 4 5 6 7 8 0.1 FKS-OUT 330p AF-OUT 330p 13 100k 0.033 12 S.G. 1000p 30 330p 0.01 9 1 1000p TH71101, TH71102, TH71111 or TH71112 (MELEXIS) 28 12 32 12p C.D. 330p 13 11 0.01 11 C.D. 3.3k 0.01 31 10 330p 0.01 32 18 10p 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 48 47 46 45 44 43 42 41 40 39 38 37 36 1 75 0.01 82p 10 4.7 0.015 22+ 10p 120p Vcc (3.2V) 0.01 220k 15p 0.047 0.01 D.C. Output AF Output 68p 0.01 0.01 AF Output 100p 4.7 AFC (p) 330p 0.1 13 14 15 16 17 18 19 20 21 22 23 24 9 1 2 3 4 5 6 7 100k 8 18 0.01 S.G. X: CDSCB10M7GA135-R0 330p Unit C: F R: 16 15 100p 14 13 12 11 10 PIC16F84 (Control IC) 1 + 10 17 2 3 4 5 6 1k 7 10k + 2.2 8 9 X: CDSCB10M7GA136-R0 0.1 Unit C: F R: Continued on the following page. 62 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. Test Circuit CDSCB10M7GF072-R0 CDSCB10M7GF107S-R0 Vcc (5.0V) Vcc (3V) AF Output 24 16 14 22 20 19 18 1 12 11 10 2 3 4 5 6 7 9 X : CDSCB10M7GF072-R0 R : 820 Unit C : F R: L:H + 0.01 10 11 12 Unit R: C: F L: H CDSCB10M7GF123-R0 0.01 AF OUT 1000p 1.2 R 24 X D.C. OUT 1 12 10 9 7 8 20 19 2 3 4 5 18 6 0.01 0.01 11 0.1 13 21 17 16 15 14 13 10 11 12 TA31275FN (TOSHIBA) 8p 51k 22 AF OUT 0.01 1000p 23 0.01 DC-OUT 3300p Vcc (3V) 14 C.D. C.D.: Ceramic Discriminator Vcc (5.0V) 12k 9 0.01 S.S.G. CDSCB10M7GF109-R0 15 13 8 IF IN 16 14 7 8 9 0.1 7 33 0.01 15 0.01 6 0.1 5 0.01 0.1 4 8 0.01 3 0.01 2 16 0.01 TA31161 (TOSHIBA) 1 17 0.01 13 21 TA31272FN (TOSHIBA) 10p 15 23 X 1.2k R 1000p 0.01 1.8k AF OUT 0.01 0.01 100 + 4.7 0.01 0.01 4 5 6 + S.S.G. 4.7 3 S.S.G. X : CDSCB10M7GF123-R0 Unit C: F R: 0.01 2 0.01 0.01 1 51 0.01 TK14588V (TOKO) X : CDSCB10M7GF109-R0 R : 820 Unit C : F R: L:H CDSCB10M7GF126-R0 DC-OUT 20 100p 0.01 + 0.01 19 18 17 16 15 14 13 12 8 9 11 NJM2295AV (JRC) 4 5 6 7 + 10 10 8p C.D. 180 10+ 3 0.01 2 0.01 1 10+ 10 Vcc (5.0V) X : CDSCB10M7GF126-R0 S.G. Unit C: F R: 18 63 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Recovered Audio Curve CDSCB10M7GA105A-R0 1000 CDSCB10M7GA113-R0 100 1000 10 100 100 AF Output 1 1 10 Distortion 10 1 1 0.1 T.H.D. (%) 10 T.H.D. (%) AF Output Voltage (mV) Distortion AF Output Voltage (mV) AF Output 100 0.1 Input = 100dB fdev. = 75kHz fmod. = 1kHz Vcc = 3.0V 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 10.3 10.4 10.5 10.6 Frequency (MHz) CDSCB10M7GA119-R0 1000 10.8 10.9 11.0 11.1 CDSCB10M7GA121-R0 100 1000 10 100 100 AF Output 1 1 T.H.D. (%) Distortion 10 AF Output Voltage (mV) AF Output 100 AF Output Voltage (mV) 10.7 Frequency (MHz) 10 Distortion 10 1 1 0.1 0.1 Input = 100dB fdev. = 75kHz fmod. = 1kHz Vcc = 3.2V Input = 100dB fdev. = 60kHz fmod. = 1kHz Vcc = 3.0V 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 10.3 11.1 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 Frequency (MHz) Frequency (MHz) CDSCB10M7GA135-R0 CDSCB10M7GA136-R0 1000 1000 100 100 AF Output Voltage (mV) AF Output Voltage (mV) T.H.D. (%) 10.3 Input = 100dB fdev. = 75kHz fmod. = 1kHz Vcc = 1.2V 10 1 10 1 18 0.1 10.4 Input = 100dB fdev. = 50kHz fmod. = 1kHz Vcc = 5.0V 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 0.1 10.4 Input = 100dB fdev. = 50kHz fmod. = 1kHz Vcc = 5.0V 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz) Continued on the following page. 64 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. Recovered Audio Curve CDSCB10M7GF109-R0 100 100 10 100 10 10 1 10 1 1 0.1 10.3 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 11.1 0.1 1 Input = 100dB fdev. = 80kHz fmod. = 1kHz Vcc = 3.0V T.H.D. (%) 1000 AF Output Voltage (mV) 100 T.H.D. (%) AF Output Voltage (mV) CDSCB10M7GF072-R0 1000 10.3 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 Input = 100dB fdev. = 64kHz fmod. = 1kHz Vcc = 3.0V 11.1 S Curve CDSCB10M7GF123-R0 CDSCB10M7GF126-R0 2.5 4.0 2.0 3.0 Volt (V) Volt (V) 1.5 1.0 2.0 0.5 0.0 10.3 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 11.1 1.0 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 Frequency (MHz) 18 65 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Discriminators Notice CDBKB Series Notice (Soldering and Mounting) 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Peak (260C max.) Temperature (C) 260 230 Heating (230C) Pre-heating 100 (150-180C) 30 sec. min. 60-120 sec. Gradual Cooling 40 sec. max. 120 sec. min. (2) Soldering Iron Electrode is directly soldered with the tip of soldering iron at +3505C for 3.00.5 seconds. 2. Wash (1) Cleaning Solvent CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA), Water (Demineralized Water), Cleaning Water Solution (Cleanthrough-750H, Pine Alpha 100S), Silicon (Technocare FRW) (2) Cleaning Conditions Immersion Wash 2 minutes max. in above solvent at +60C max. Shower or Rinse Wash 2 minutes max. in above solvent at +60C max. (3) Notice When components are immersed in solvent, be sure to maintain the temperature of components below the temperature of solvent. Please do not use ultrasonic cleaning. Total washing time should be within 4 minutes. Please ensure the component is thoroughly evaluated in your application circuit. Please do not use chlorine, petroleum and alkaline cleaning solvents. If you plan to use any other type of solvents, please consult with Murata or Murata representative prior to using. Continued on the following page. 18 66 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Discriminators Notice Continued from the preceding page. CDSCB Series Notice (Soldering and Mounting) Temperature (C) 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered twice within the following temperature conditions. Peak (260C max.) 260 230 Pre-heating (150-180C) 100 Heating (230C) Gradual Cooling 30 sec. min. 60-120 sec. 40 sec. max. 120 sec. min. (2) Soldering Iron Filter is soldered at +3005C for 3.00.5 seconds. The soldering iron should not touch the filter while soldering. 2. Wash The component cannot withstand washing. 18 67 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Discriminators Notice CDBKB Series Notice (Handling) 1. The component will be damaged when an excessive stress is applied. 2. In the case that the component is cleaned, confirm no reliability degradation is created. 3. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 4. Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. 5. The product, packed in the moisture-proof bag (dry pack), is sensitive to moisture. The following treatment is required before applying re-flow soldering, to avoid package cracks or reliability degradation caused by thermal stress. When unpacked, store the component in an atmosphere of below 25 degrees C. and below 65%R.H., and solder within 48 hours. CDBLA/CDBLB Series Notice (Handling) 1. Do not use this product with bend. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. The component will be damaged when an excessive stress is applied. 3. All kinds of re-flow soldering must not be applied on the component. 4. Do not clean or wash the component as it is not hermetically sealed. 5. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 6. In case of covering discriminator with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. CDSCB Series Notice (Handling) 18 1. The component mounted on the PCB may be damaged if excessive mechanical stress is applied. 2. Layout the components on the PCB to minimize the stress imposed on the warp or flexure of the board. 3. After installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. 4. The component may be damaged during mounting process if some part of mounter such as positioning claws or nozzle are worn down. The regular maintenance recommended for mounters should be done to prevent troubles. 5. When correcting component's position with a soldering iron, the tip of the soldering iron should not directly touch the chip component. Depending on the soldering conditions, the effective area of terminations may be reduced. The use of solder containing Ag should be considered to prevent the electrode erosion. 6. Do not clean or wash the component as it is not hermetically sealed. 7. In case of overcoating the part, coating conditions such as material of resin, curing temperature, and so on should be evaluated carefully. 8. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 9. For safety purposes, avoid applying a direct current between the terminals. 68 [Component Direction] Put the component laterally to the direction in which stress acts. [Component Layout Close to Board] Perforation B A Slit C Susceptibility to stress is in the order of : A>C>B PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Discriminators Standard Land Pattern Dimensions/Packaging Standard Land Pattern Dimensions CDBKB Series 2.6 3.0 1.2 4.9 2.6 2.0 1.2 CDSCB Series 1.0 2.0 1.0 (in mm) (in mm) Minimum Quantity Part Number Taping o180mm Bulk Magazine CDBLA Series 500 50 CDBLB Series 500 80 CDBKB Series 500 CDSCB Series 2000 (pcs.) The order quantity should be an integral multiple of the "Minimum Quantity" shown above. CDBKB Series Dimensions of Carrier Tape 1.750.1 8.00.1 3 max. User direction of feed Cover film (o180 +0 -3.0) (o60 +1.0 -0 ) Empty 7.20.1 o1.5 +0.1 -0.0 7.50.1 2.00.1 Trailer 160 to 190 16.00.15 4.00.1 Dimensions of Reel Leader Cover film Components 2.00.2 o13.00.5 Empty 160 to 200 400 to 560 3.30.1 17.00.3 19.41.0 6.30.1 * Part number marked side is always facing upside. (in mm) Continued on the following page. 18 69 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P05E.pdf 11.1.11 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Discriminators Standard Land Pattern Dimensions/Packaging Continued from the preceding page. CDSCB Series Dimensions of Carrier Tape o1.5 2.00.05 1.750.1 4.00.1 Dimension of reel +0.1 -0 Trailer 160 to 190 Leader Cover film 10 Cover film (3) User direction of feed * Part number marked side is always facing upside. 18 70 Empty 240 to 280 400 to 560 180 +0.1 -1.5 +0.1 o13.00.2 60 -0 12.00.2 (1.7 max.) 2.20.1 1.10.1 4.70.1 +0.1 o1.5 -0 0.30.05 (9.0) 4.00.1 Peeling strength 0.1 to 0.7N 5.50.05 Empty Components 2.00.5 +1.0 13.0 -0 17.01.0 ( ) : Reference (in mm) !Note * This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P05E.pdf 11.1.11