Cat.No.P05E-15
Ceramic Filters (CERAFILr)/
Ceramic Discriminators
for Communications
Equipment
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
for EU RoHS Compliant
• All the products in this catalog comply with EU RoHS.
• EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment".
• For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
CERAFILr and "CERAFIL" in this catalog are
the trademarks of Murata Manufacturing Co., Ltd.
CONTENTS
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Part Numbering 2
Products Guide 4
CERAFILr kHz SMD Type SFPKA Series 5
CERAFILr kHz SMD Type CFUKG Series 7
CERAFILr kHz SMD Type CFUKG_X Series 9
CERAFILr kHz SMD Type CFUKF Series 11
CERAFILr kHz SMD Type CFWKA Series 13
CERAFILr kHz SMD Type CFWKA_Y Series 15
kHz SMD Type CERAFILr Notice 17
CERAFILr MHz SMD Type SFECF10M7 Series 19
CERAFILr MHz SMD Type SFSCE10M7 Series 21
MHz SMD Type CERAFILr Notice 23
SMD Type CERAFILr Standard Land Pattern Dimensions 27
kHz SMD Type CERAFILr Packaging 28
MHz SMD Type CERAFILr Packaging 30
CERAFILr Plastic Case General Use CFULA Series 31
CERAFILr Plastic Case General Use CFWLA Series 33
CERAFILr Plastic Case Miniaturized Type CFULB Series 35
CERAFILr Plastic Case Miniaturized Type CFWLB Series 37
CERAFILr Plastic Case Group Delay Flat Type CFULA_Y Series 39
CERAFILr Plastic Case Group Delay Flat Type CFWLA_Y Series 41
CERAFILr Plastic Case Group Delay Flat Type Miniaturized Type CFULB_Y Series
43
CERAFILr Plastic Case Group Delay Flat Type CFWLB_Y Series 45
Plastic Case Type CERAFILr Minimum Quantity/Notice 47
kHz Type Ceramic Discriminators 48
MHz Type Ceramic Discriminators 61
Ceramic Discriminators Notice 66
Ceramic Discriminators Standard Land Pattern Dimensions/Packaging 69
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
2
o Part Numbering
yewrt uq
KA
P 455K D4A -R0
SF
S0CFE 10M7 DF00 -R0
SF
(Part Number)
qProduct ID
wOscillating/Element
Ceramic Filters (CERAFILr) for IF
CF
SF
U
W
P
E
S
Ceramic Filters
Three-digit alphanumerics express pass band width,
center frequency tolerance and design type.
Product ID
tProduct Specification
D4A
Code Product Specification
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is hertz (Hz). If
the unit is "kHz", it is expressed by three figures plus "K". If the
unit is "MHz", a decimal point is expressed by the capital letter
"M".
p is "A" or subsequent code, which indicates the size. It varies
depending on vibration mode and number of elements.
Chip type is only applied for SF series.
Expressed by three-digit alphanumerics.
yIndividual Specification
001
Code Individual Specification Code
Bulk
Embossed Taping ø=180mm
Embossed Taping ø=330mm
Magazine
uPackaging
-B0
-R0
-R1
-M0
Code Packaging
Oscillating/Element
Chip Type
Lead Type
eStructure/Size
Cp/Kp
Lp
Code Structure/Size
4 Elements Area Expansion mode
6 Elements Area Expansion mode
4 Elements Area Expansion mode
2 Elements Thickness Expansion mode
2 Elements Thickness Shear mode
Magazine cassette is applied to lead type and embossed taping to
chip type.
SFE/S/J series are expressed by four-digit alphanumerics.
SFE/S/J series are expressed by two-digit alphanumerics.
With standard type, y is omitted.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
3
e
CB
w
S
r
10M7
t
GF
u
-R0
y
001
q
CD
(Part Number)
qProduct ID
wOscillation
Ceramic Discriminators for IF (MHz)
CD Discriminators
Product ID
tProduct Specification
GF
Code Product Specification
With non-standard products, an alphanumerics indicating "Individual
Specification" is added between "yIC" and "uPackaging".
eStructure/Size
Embossed Taping ø=180mm
yIC
001
Code IC
Applicable IC Control Code
uPackaging
-R0
Code Packaging
Thickness Shear mode
S
Code Oscillation
Chip Type
Cp
Code Structure/Size
p is expressed "A" or subsequent code, which indicates the size.
Two-digit alphanumerics express
type, center frequency, rank, others
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".
y
A
e
LB
w
B
r
450K
t
C
u
X
i
16
o
-B0
q
CD
(Part Number)
qProduct ID
Ceramic Discriminators for IF (kHz)
CD Ceramic Discriminators
Quadrature Detection
Product ID
tDetection
C
Code Detection
Magazine cassette is applied to lead type and embossed taping to
chip type. With non-standard products, one letter indicating
"Individual Specification" is added between "iApplicable IC" and
"oPackage Specification code".
p is "A" or subsequent code, which indicates the size. It varies
depending on vibration mode and number of elements.
Standard
Application with coil
yApplication
A
L
Code Application
Low-capacitance
High-capacitance
uElement Type
X
Y
Code Element Type
Applicable IC Control code
iIC
16
Code IC
Bulk
Embossed Taping ø=180mm
Embossed Taping ø=330mm
Magazine
oPackaging
-B0
-R0
-R1
-M0
Code Packaging
Area Expansion mode
wOscillating
B
Code Oscillating
Chip Type
Lead Type
eStructure/Size
Cp/Kp
Lp
Code Structure/Size
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Capital letter "K" following three figures expresses the unit of
"kHz".
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
4
Type
Series
Applications
6dB Bandwidth (kHz) min.
General Use Attenuation
(dB) min.
oSMD Type (kHz)
High Selectivity
Series
(Plastic Case Type)
Narrow Bandwidth
GDT Flat Type
Miniature Series
(Plastic Case Type)
GDT Flat Type
Miniature Series
(Plastic Case Type)
GDT Flat Type
High Selectivity
SMD Series
(Plastic Case Type)
High Selectivity
SMD Series
(Plastic Case Type)
SFPKA455KM
(4 Elements)
CFUKG455KM
(4 Elements)
CFUKG455KMX
(4 Elements)
CFUKF455KM
(4 Elements)
CFWKA450KBFY
(6 Elements)
CFWKA450KM
(6 Elements)
oLead Type (kHz)
27 (G to H ; 25)
27 (G ; 25)
27 (G to H ; 25)
25 (D to E ; 23)
45
50
A
±17.5
–
–
–
o
–
–
B
±15
–
–
–
o
o
–
C
±12.5
–
–
–
o
–
–
D
±10
o
o
–
o
–
o
E
±7.5
o
o
o
o
–
o
F
±6
o
o
o
–
–
o
G
±4.5
o
o
o
–
–
o
H
±3
o
–
o
–
–
–
J
±2
–
–
–
–
–
–
K
±1.5
–
–
–
–
–
–
L
±1
–
–
–
–
–
–
Type
Series
Applications
6dB Bandwidth (kHz) min.
General Use Attenuation
(dB) min.
Within 455±80 or ±100kHz
Within 455±80 or ±100kHz
High Selectivity
Low Profile Series
High Selectivity
Miniature Series
GDT Flat Type
Series
GDT Flat Type
Miniature Series
CFULA455KM (4 Elements)
CFWLA455KM (6 Elements)
CFULB455KM (4 Elements)
CFWLB455KM (6 Elements)
CFULA455KMY (4 Elements)
CFWLA455KMY (6 Elements)
CFULB455KMY (4 Elements)
CFWLB455KMY (6 Elements)
27
35 (H, J ; 60)
27
35 (H, J ; 55)
25 (D to G ; 23)
40
25 (D to G ; 23)
40 (F ; 35)
A
±17.5
–
–
–
–
–
o
–
o
B
±15
o
o
o
o
o
o
o
o
C
±12.5
o
o
o
o
o
o
o
o
D
±10
o
o
o
o
o
o
o
o
E
±7.5
o
o
o
o
o
o
o
o
F
±6
o
o
o
o
o
o
o
o
G
±4.5
o
o
o
o
o
o
o
o
H
±3
o
o
o
o
–
–
–
–
J
±2
–
o
o
o
–
–
–
–
K
±1.5
–
–
–
–
–
–
–
–
L
±1
–
–
–
–
–
–
–
–
(G ; 25)
(H ; 35)
(G ; 25)
(H, J ; 35)
Products Guide
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
5
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr kHz SMD Type SFPKA Series
The SFPKA series is comprised of small, high performance,
economical, thin (5.0mm) filters consisting of 4
ceramic elements.
Their innovative construction is perfect for shrinking
mobile communication products such as cordless phones,
pagers and transceivers.
■ Features
1. The filters are mountable by automatic placers.
2. The filters can be reflow soldered and withstand
washing.
3. They are slim, at only 5.0mm maximum thickness.
4. The bandwidth ranges from D to H.
5. Operating temperature range: -20 to +80 (degrees C)
Storage temperature range: -40 to +85 (degrees C)
7.5±0.3
5.0 max.
3.0±0.3
8.4 max.
2.0±0.3
1.5±0.3
7.0±0.3
0.9±0.1
MARKING
EIAJ
CODE
2.0±0.3
(1) (2) (3)
1.5±0.3 1.6±0.3Connection
(1) : Input
(2) : Ground
(3) : Output
(in mm)
Part Number Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion
Loss
(dB)
Ripple
(dB)
Input/Output
Impedance
(ohm)
SFPKA455KD4A-R1 455
±1.5kHz fn±10.0
min. fn±20.0 max.
[within 40dB] 27 min.
[within fn±100kHz] 4.0 max.
[at minimum loss point] 2.0 max.
[within fn±7kHz] 1500
SFPKA455KE4A-R1 455
±1.5kHz fn±7.5
min. fn±15.0 max.
[within 40dB] 27 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 1.5 max.
[within fn±5kHz] 1500
SFPKA455KF4A-R1 455
±1.5kHz fn±6.0
min. fn±12.5 max.
[within 40dB] 27 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 1.5 max.
[within fn±4kHz] 1500
SFPKA455KG1A-R1 455
±1.0kHz fn±4.5
min. fn±10.0 max.
[within 40dB] 25 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 1.5 max.
[within fn±3kHz] 1500
SFPKA455KH1A-R1 455
±1.0kHz fn±3.0
min. fn±9.0 max.
[within 40dB] 35 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 1.5 max.
[within fn±2kHz] 2000
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
■ Test Circuit
Rg+R1=R2=Input/Output Impedance
E1 : S.S.G. Output Voltage
E1
R1
Rg
S.S.G.
0dBm
(1)
(2)
(3)
R2 E2 RF Voltmeter
(1) : Input
(2) : Ground
(3) : Output
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
6
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics
SFPKA455KE4A-R1
100
40
30
20
10
0
Attenuation (dB)
G.D.T. (µsec.)
430 455 480
Frequency (kHz)
90
80
70
60
50
0
240
280
320
360
400
40
80
120
160
200
SFPKA455KE4A-R1
100
40
30
20
10
0
Attenuation (dB)
200 Frequency (kHz)
90
80
70
60
50
300 400 500 600 700 800 900 1000
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
7
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr kHz SMD Type CFUKG Series
The CFUKG series is comprised of small, high performance,
thin (4.0mm) filters consisting of 4 ceramic elements.
Their innovative construction is perfect for shrinking
mobile communication products such as pocket pagers
and cellular phones.
■ Features
1. The filters are mountable by automatic placers.
2. The filters can be reflow soldered and withstand
washing.
3. They are slim, at only 4.0mm maximum thickness,
and have a small mounting area (7.5x6.0mm)
enabling flexible PCB design.
4. The bandwidth ranges from D to G.
5. Operating temperature range: -20 to +80 (degrees C)
Storage temperature range: -40 to +85 (degrees C)
1.5±0.3 3.0±0.3
1.0±0.1
4.0±0.3
6.5±0.3
7.5 max.
C0.5 1.2±0.1
4.0 max.
1.0±0.1
(in mm)
Connection
(1) : Input
(2) : Output
(3) : Ground
1.0±0.3 1.0±0.31.5±0.3
6.0±0.3
(1) (2)
(3)
MARKING
EIAJ
CODE
Part Number Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion
Loss
(dB)
Ripple
(dB)
Input/Output
Impedance
(ohm)
CFUKG455KD4A-R0 455
±1.5kHz fn±10.0
min. fn±20.0 max.
[within 40dB] 27 min.
[within fn±100kHz] 4.0 max.
[at minimum loss point] 2.0 max.
[within fn±7kHz] 1500
CFUKG455KE4A-R0 455
±1.5kHz fn±7.5
min. fn±15.0 max.
[within 40dB] 27 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 1.5 max.
[within fn±5kHz] 1500
CFUKG455KF4A-R0 455
±1.5kHz fn±6.0
min. fn±12.5 max.
[within 40dB] 27 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 1.5 max.
[within fn±4kHz] 1500
CFUKG455KG1A-R0 455
±1.0kHz fn±4.5
min. fn±10.0 max.
[within 40dB] 25 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 1.5 max.
[within fn±3kHz] 1500
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
■ Test Circuit
E1
Rg
S.S.G.
0dBm
R1
RF Voltmeter
Connection
(1) : Input
(2) : Output
(3) : Ground
(2)
(3)
(1)
R2 E2
Rg+R1=R2=Input/Output Impedance
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
8
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics
CFUKG455KE4A-R0
100
40
30
20
10
0
Attenuation (dB)
0
100
200
300
400
G.D.T. (µsec.)
430 455 480
Frequency (kHz)
90
80
70
60
50
CFUKG455KE4A-R0
100
40
30
20
10
0
Attenuation (dB)
200 Frequency (kHz)
90
80
70
60
50
300 400 500 600 700 800 900 1000
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
9
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr kHz SMD Type CFUKG_X Series
The CFUKG_X series is comprised of small, high performance,
thin (4.0mm) filters consisting of 4 ceramic elements.
The filters exhibit an extremely flat GDT
characteristic combined with a narrow bandwidth.
The filters are recommended for narrow band digital
communication applications.
■ Features
1. The filters are mountable by automatic placers.
2. The filters can be reflow soldered and withstand
washing.
3. They are slim, at only 4.0mm maximum thickness,
and have a small mounting area (7.5x6.0mm)
enabling flexible PCB design.
4. The bandwidth ranges from E to H.
5. Operating temperature range: -20 to +80 (degrees C)
Storage temperature range: -40 to +85 (degrees C)
1.5±0.3 3.0±0.3
1.0±0.1
4.0±0.3
6.5±0.3
7.5 max.
C0.5 1.2±0.1
4.0 max.
1.0±0.1
(in mm)
Connection
(1) : Input
(2) : Output
(3) : Ground
1.0±0.3 1.0±0.31.5±0.3
6.0±0.3
(1) (2)
(3)
MARKING
EIAJ
CODE
Part Number Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion
Loss
(dB)
Ripple
(dB) GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
CFUKG455KE4X-R0
455
±1.5kHz fn±7.5
min. fn±17.5 max.
[within 40dB] 27 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 1.0 max.
[within fn±5kHz] 25.0 max.
[within fn±5kHz] 1500
CFUKG455KF4X-R0
455
±1.5kHz fn±6.0
min. fn±15.0 max.
[within 40dB] 27 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 1.0 max.
[within fn±4kHz] 25.0 max.
[within fn±4kHz] 1500
CFUKG455KG1X-R0
455
±1.0kHz fn±4.5
min. fn±12.5 max.
[within 40dB] 25 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 1.0 max.
[within fn±3kHz] 25.0 max.
[within fn±3kHz] 1500
CFUKG455KH1X-R0
455
±1.0kHz fn±3.0
min. fn±10.0 max.
[within 40dB] 25 min.
[within fn±100kHz] 7.0 max.
[at minimum loss point] 1.0 max.
[within fn±2kHz] 25.0 max.
[within fn±2kHz] 1500
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
■ Test Circuit
E1
Rg
S.S.G.
0dBm
R1
RF Voltmeter
Connection
(1) : Input
(2) : Output
(3) : Ground
(2)
(3)
(1)
R2 E2
Rg+R1=R2=Input/Output Impedance
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
10
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics
CFUKG455KE4X-R0
100
40
30
20
10
0
Attenuation (dB)
0
50
100
150
200
G.D.T. (µsec.)
430 455 480
Frequency (kHz)
90
80
70
60
50
CFUKG455KE4X-R0
100
40
30
20
10
0
Attenuation (dB)
200 Frequency (kHz)
90
80
70
60
50
300 400 500 600 700 800 900 1000
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
11
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr kHz SMD Type CFUKF Series
The CFUKF series is comprised of small, high performance,
thin (4.0mm) filters consisting of 4 ceramic elements.
The filters exhibit an extremely flat GDT
characteristic.
The filters are recommended for digital
communication applications and are perfect in hand
held cellular phones, etc.
■ Features
1. The filters are mountable by automatic placers.
2. The filters can be reflow soldered and withstand
washing.
3. They are slim, at only 4.0mm maximum thickness,
and have a small mounting area (7.5x6.0mm)
enabling flexible PCB design.
4. The bandwidth ranges from A to E.
5. Operating temperature range: -20 to +80 (degrees C)
Storage temperature range: -40 to +85 (degrees C)
1.5±0.3 3.0±0.3
1.0±0.1
4.0±0.3
6.5±0.3
7.5 max.
C0.5 1.2±0.1
4.0 max.
1.0±0.1
(in mm)
Connection
(1) : Input
(2) : Output
(3) : Ground
1.0±0.3 1.0±0.31.5±0.3
6.0±0.3
(1) (2)
(3)
MARKING
EIAJ
CODE
Part Number Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion
Loss
(dB)
Ripple
(dB) GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
CFUKF455KA2X-R0
455
±2.0kHz fn±17.5
min. fn±40.0 max.
[within 40dB] 25 min.
[within fn±100kHz] 4.0 max.
[at minimum loss point] 1.0 max.
[within fn±12kHz] 15.0 max.
[within fn±12kHz] 1000
CFUKF455KB4X-R0
455
±1.5kHz fn±15.0
min. fn±35.0 max.
[within 40dB] 25 min.
[within fn±100kHz] 5.0 max.
[at minimum loss point] 1.0 max.
[within fn±10kHz] 15.0 max.
[within fn±10kHz] 1000
CFUKF455KC4X-R0
455
±1.5kHz fn±12.5
min. fn±30.0 max.
[within 40dB] 25 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 1.0 max.
[within fn±8kHz] 15.0 max.
[within fn±8kHz] 1000
CFUKF455KD1X-R0
455
±1.0kHz fn±10.0
min. fn±25.0 max.
[within 40dB] 23 min.
[within fn±100kHz] 7.0 max.
[at minimum loss point] 1.0 max.
[within fn±7kHz] 20.0 max.
[within fn±7kHz] 1500
CFUKF455KE1X-R0
455
±1.0kHz fn±7.5
min. fn±20.0 max.
[within 40dB] 23 min.
[within fn±100kHz] 8.0 max.
[at minimum loss point] 1.0 max.
[within fn±5kHz] 20.0 max.
[within fn±5kHz] 1500
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
■ Test Circuit
E1
Rg
S.S.G.
0dBm
R1
RF Voltmeter
Connection
(1) : Input
(2) : Output
(3) : Ground
(2)
(3)
(1)
R2 E2
Rg+R1=R2=Input/Output Impedance
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
12
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics
CFUKF455KE1X-R0
100
40
30
20
10
0
Attenuation (dB)
0
50
100
150
200
G.D.T. (µsec.)
430 455 480
Frequency (kHz)
90
80
70
60
50
CFUKF455KE1X-R0
100
40
30
20
10
0
Attenuation (dB)
200 Frequency (kHz)
90
80
70
60
50
300 400 500 600 700 800 900 1000
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
13
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr kHz SMD Type CFWKA Series
The CFWKA series is comprised of small, high performance,
thin (3.0mm) filters consisting of 6 ceramic elements.
The filters are recommend for pager or hand held
cellular phones.
■ Features
1. The filters are mountable by automatic placers.
2. The filters can be reflow soldered.
3. They are slim, at only 3.0mm maximum thickness.
4. The filters are wide bandwidth, flat GDT within
pass band.
5. Operating temperature range: -20 to +80 (degrees C)
Storage temperature range: -40 to +85 (degrees C)
MARKING
6.5
7.5 max.
3.0max.
11.5 5.5 3.0
1.2±0.1
1.5±0.3
1.2±0.1 1.2±0.1
1.5±0.3
1.2±0.1 C0.3
3.0
3.0 5.5
Dot marking
Sealing
Sealing
: Input
: Output
: Ground
(1) (1)
(2) (2)
(4) (3) (3)(4)
EIAJ
CODE
Tolerance ±0.3mm
in mm
( )
Part Number Nominal Center
Frequency (fn)
(kHz)
3dB
Bandwidth
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Stop Band Att.(2)
(dB)
Insertion
Loss
(dB)
Ripple
(dB)
Input/Output
Impedance
(ohm)
CFWKA450KDFA-R0
450.0 - fn±10.0
min. fn±20.0 max.
[within 50dB] 50 min.
[within fn±100kHz] -4.0 max.
[at minimum loss point] 3.0 max.
[within fn±7kHz] 1500
CFWKA450KEFA-R0
450.0 - fn±7.5
min. fn±15.0 max.
[within 50dB] 50 min.
[within fn±100kHz] -6.0 max.
[at minimum loss point] 3.0 max.
[within fn±5kHz] 1500
CFWKA450KEFA001-R0
450.0 fn±6.5 min. - fn±15.0 max.
[within 50dB] 55 min.
[fn±18 to ±33kHz] 50 min.
[within fn±100kHz] 4.0 max.
[at fn] 3.0 max.
[within fn±6.5kHz] 1500
CFWKA450KFFA-R0
450.0 - fn±6.0
min. fn±12.5 min.
[within 50dB] 50 min.
[within fn±100kHz] -6.0 max.
[at minimum loss point] 3.0 max.
[within fn±4kHz] 1500
CFWKA450KGFA-R0
450.0 - fn±4.5
min. fn±11.0 max.
[within 50dB] 50 min.
[within fn±100kHz] -6.0 max.
[at minimum loss point] 2.0 max.
[within fn±3kHz] 1500
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
■ Test Circuit
E1
Rg
S.S.G.
0dBm
R1
RF Voltmeter
Connection
(1) : Input
(2) : Output
(3)(4) : Ground
(2)
(4)
(1)
R2 E2
(3)
Rg+R1=R2=Input/Output Impedance
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
14
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics
CFWKA450KEFA001-R0
Frequency (kHz)
Attenuation (dB)
G.D.T. (µ sec.)
400
300
200
100
0
440.0 450.0 460.0
0
4
8
12
16
20
24
28
32
36
40
CFWKA450KEFA001-R0
10
0
20
30
40
50
60
70
80
90
100 430 455 480
Frequency (kHz)
Attenuation (dB)
CFWKA450KEFA001-R0
Frequency (kHz)
Attenuation (dB)
200 300 400 500 600 700 800 900 1000
0
10
20
30
40
50
60
70
80
90
100
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
15
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr kHz SMD Type CFWKA_Y Series
The CFWKA_Y series is comprised of small, high
performance, thin (3.0mm) filters consisting of 6
ceramic elements. The filters are recommend for
digital communication applications and are perfect
in hand held cellular phones.
■ Features
1. The filters are mountable by automatic placers, and
can be reflow soldered.
2. They are slim, at only 3.0mm maximum thickness.
3. The filters are wide bandwidth, flat GDT within
pass band.
4. Operating temperature range: -20 to +80 (degrees C)
Storage temperature range: -40 to +85 (degrees C)
Y50
B 1
6.5
7.5 max.
3.0 max.
11.5 5.5 3.0
1.2±0.1
1.5±0.3
1.2±0.1 1.2±0.1
1.5±0.3
1.2±0.1 C0.3
3.0
3.0 5.5
Dot marking
Sealing
Sealing
Tolerance ±0.3mm
in mm
: Input
: Output
: Ground
(1) (1)
(2)
(2)
(4) (3)
(3)(4)
EIAJ
CODE
( )
Part Number Nominal Center
Frequency (fn)
(kHz)
3dB
Bandwidth
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion
Loss
(dB)
Spurious
Response
(dB)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
CFWKA450KBFY001-R0
450.0 fn±11.5 min. fn±13.0
min. fn±30.0 max.
[within 50dB] 45 min.
[within fn±100kHz] 4.0 max.
[at minimum loss point] 20 min.
[within 0.1 to 1.0MHz] 30.0 max.
[within fn±10kHz] 1000
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
■ Test Circuit
E1
Rg
S.S.G.
0dBm
R1
RF Voltmeter
Connection
(1) : Input
(2) : Output
(3)(4) : Ground
(2)
(4)
(1)
R2 E2
(3)
Rg+R1=R2=Input/Output Impedance
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
16
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics
Attenuation (dB)
G.D.T. (µ sec.)
200
150
100
50
0
420 430 440 450 460 470 480
Frequency (kHz)
0
2
4
6
8
10
12
14
16
18
20
Frequency (kHz)
Attenuation (dB)
200 300 400 500 600 700 800 900 1000
0
10
20
30
40
50
60
70
80
90
100
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
kHz SMD Type CERAFILr Notice
17
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ SFPKA/CFUKG/CFUKF Series Notice (Soldering and Mounting)
1. Standard Reflow Soldering Conditions
(1) Reflow
CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA),
Water (Demineralized Water), Cleaning Water Solution
(Cleanthrough-750H, Pine Alpha 100S), Silicon
(Technocare FRW)
2. Wash
(1) Cleaning Solvent
Immersion Wash
2 minutes max. in above solvent at +60°C max.
Shower or Rinse Wash
2 minutes max. in above solvent at +60°C max.
(2) Cleaning Conditions
When components are immersed in solvent, be sure to
maintain the temperature of components below the
temperature of solvent.
Please do not use ultrasonic cleaning.
Total washing time should be within 4 minutes.
Please ensure the component is thoroughly evaluated
in your application circuit.
Please do not use chlorine, petroleum and alkaline
cleaning solvents.
If you plan to use any other type of solvents, please
consult with Murata or Murata representative prior to
using.
(3) Notice
Electrode is directly soldered with the tip of soldering iron
at +350±5°C for 3.0±0.5 seconds.
(2) Soldering Iron
Peak
(260°C max.)
Heating
(230°C)
Gradual
Cooling
Pre-heating
(150-180°C)
100
230
260
Temperature (°C)
60-120 sec. 40 sec.
max.
30 sec.
min. 120 sec.
min.
Filter is soldered twice within the following temperature
conditions.
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
kHz SMD Type CERAFILr Notice
18
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ CFWKA Series Notice (Soldering and Mounting)
Filter is soldered twice within the following temperature
conditions.
1. Standard Reflow Soldering Conditions
(1) Reflow
The component cannot withstand washing.
2. Wash
Electrode is directly soldered with the tip of soldering iron
at +350±5°C for 3.0±0.5 seconds.
(2) Soldering Iron
Peak
(260°C max.)
Heating
(240°C)
Gradual
Cooling
Pre-heating
(150-180°C)
100
240
260
Temperature (°C)
60-120 sec. 30 sec.
max.
30 sec.
min. 120 sec.
min.
■ SFPKA/CFUKG/CFUKF Series Notice (Handling)
■ CFWKA Series Notice (Handling)
1. The component will be damaged when an excessive
stress is applied.
2. For safety purposes, connect the output of filters
to the IF amplifier through a D.C. blocking
capacitor. Avoid applying a direct current to the
output of ceramic filters.
3. Do not clean or wash the component as it's not
hermetically sealed.
4. Do not apply conformal coating onto the component
as it's not hermetically sealed.
5. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in re-flow soldering.
1. The component will be damaged when an excessive
stress is applied.
2. In the case that the component is cleaned, confirm
that no reliability degradation is created.
3. In case of covering filter with over coat,
conditions such as material of resin, cure
temperature, and so on should be evaluated
carefully.
4. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in re-flow soldering.
5. The product, packed in the moisture-proof bag
(dry pack), is sensitive to moisture. The following
treatment is required before applying re-flow
soldering, to avoid package cracks or reliability
degradation caused by thermal stress. When unpacked,
store the component in an atmosphere of below 25
degree C and below 65%R.H., and solder within 48
hours.
6. For safety purposes, connect the output of filters
to the IF amplifier through a D.C. blocking
capacitor. Avoid applying a direct current to the
output of ceramic filters.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
19
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr MHz SMD Type SFECF10M7 Series
SFECF10M7 series for FM-receivers are small,
high performance and super thin (1.4mm max.) filters.
Piezoelectric element is connected in the sandwich
shape by ceramics substrate.
They have 1.4mm max. thickness and small mounting area.
(3.45x3.1mm)
SFECF series and CDSCB series (MHz Discriminator)
enable customers to make VICS/RKE/TPMS set so thin and
small sized.
■ Features
1. The filters are mountable by automatic placers.
2. They are slim, at only 1.4mm max. thickness, and
have a small mounting area (3.45x3.1mm) enabling
flexible PCB design.
3. Various bandwidths are available. Select a
suitable type in accordance with the desired
selectivity.
4. Operating Temperature Range:
-20 to +80 (degrees C)(Standard Type)
-40 to +85 (degrees C)(High-reliability Type)
Storage Temperature Range:
-40 to +85 (degrees C)(Standard Type)
-55 to +85 (degrees C)(High-reliability Type)
0.75±0.3
(in mm)
1.3±0.1
3.1±0.2
3.45±0.2
(0.6)(0.6) (0.6)
(1.28)
(1.28)
0 to 0.4
(6)
(1.28)(1.28)
0.65±0.3
0.85±0.3
0.85±0.3
0 to 0.35 0 to 0.35
0 to 0.4
(5) (4)
(1) (2) (3)
0.65±0.3
0.3 min.0.3 min.
: EIAJ Monthly Code
: Reference( )
(1) : Input
(2)(5) : Ground
(3)(4) : No connect
(6) : Output
0.7±0.3
Input electrode
marker
Standard Type
Part Number Center
Frequency
(fo) (MHz)
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz) Insertion Loss
(dB) Ripple
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFECF10M7HA00-R0
10.700
±30kHz - 180 ±40kHz 470 max. 4.0 ±2.0dB 1.0 max. 30 min.
[within 9MHz to fo] 30 min.
[within fo to 12MHz] 330
SFECF10M7HF00-R0
- 10.700 fn±25 min. 510 max. 8.0 max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn] 25 min.
[within fn to 12MHz] 330
SFECF10M7GA00-R0
10.700
±30kHz - 230 ±50kHz 510 max. 3.5 ±2.0dB 1.0 max. 30 min.
[within 9MHz to fo] 30 min.
[within fo to 12MHz] 330
SFECF10M7GF00-R0
- 10.700 fn±45 min. 560 max. 8.0 max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn] 25 min.
[within fn to 12MHz] 330
SFECF10M7FA00-R0
10.700
±30kHz - 280 ±50kHz 590 max. 3.0 ±2.0dB 1.0 max. 30 min.
[within 9MHz to fo] 30 min.
[within fo to 12MHz] 330
SFECF10M7FF00-R0
- 10.700 fn±65 min. 620 max. 7.0 max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn] 25 min.
[within fn to 12MHz] 330
SFECF10M7EA00-R0
10.700
±30kHz - 330 ±50kHz 700 max. 3.0 ±2.0dB 1.0 max. 30 min.
[within 9MHz to fo] 30 min.
[within fo to 12MHz] 330
SFECF10M7DA0001-R0
10.700
±30kHz - 420 min. 950 max. 3.0 ±2.0dB 3.0 max. 35 min.
[within 9MHz to fo] 25 min.
[within fo to 12MHz] 330
SFECF10M7DF00-R0
- 10.700 fn±150 min. 990 max. 6.0 max.
[at fn] 3.0 max. 20 min.
[within 9MHz to fn] 20 min.
[within fn to 12MHz] 330
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W.
Center frequency (fo) defined by center of 3dB bandwidth.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
20
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
High-reliability Type
Part Number Center
Frequency
(fo) (MHz)
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
Attenuation
(kHz) Insertion Loss
(dB) Ripple
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFECF10M7HA00S0-R0
10.700
±30kHz - 180 ±40kHz 470 max. 4.0 ±2.0dB 1.0 max. 30 min.
[within 9MHz to fo] 30 min.
[within fo to 12MHz] 330
SFECF10M7HF00S0-R0
- 10.700 fn±25 min. 510 max. 8.0 max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn] 25 min.
[within fn to 12MHz] 330
SFECF10M7GA00S0-R0
10.700
±30kHz - 230 ±50kHz 510 max. 3.5 ±2.0dB 1.0 max. 30 min.
[within 9MHz to fo] 30 min.
[within fo to 12MHz] 330
SFECF10M7GF00S0-R0
- 10.700 fn±45 min. 560 max. 8.0 max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn] 25 min.
[within fn to 12MHz] 330
SFECF10M7FA00S0-R0
10.700
±30kHz - 280 ±50kHz 590 max. 3.0 ±2.0dB 1.0 max. 30 min.
[within 9MHz to fo] 30 min.
[within fo to 12MHz] 330
SFECF10M7FF00S0-R0
- 10.700 fn±65 min. 630 max. 7.0 max.
[at fn] 1.0 max. 30 min.
[within 9MHz to fn] 25 min.
[within fn to 12MHz] 330
SFECF10M7EA00S0-R0
10.700
±30kHz - 330 ±50kHz 700 max. 3.0 ±2.0dB 1.0 max. 30 min.
[within 9MHz to fo] 30 min.
[within fo to 12MHz] 330
SFECF10M7DF00S0-R0
- 10.700 fn±145 min. 990 max. 6.0 max.
[at fn] 3.0 max. 20 min.
[within 9MHz to fn] 20 min.
[within fn to 12MHz] 330
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W.
Center frequency (fo) defined by center of 3dB bandwidth.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
■ Test Circuit
(1)
(2)
(3)
(6)
(5)
(4)
R2C2E2RF
Voltmeter
R1
E1
S.S.G.
Rg
Rg = 50Ω R1 = 280Ω ±5% R2 = 330Ω ±5%
C2 = 10 ± 2 pF (Including stray capacitance and Input capacitance
of RF Volt Meter)
E1 : S.S.G. Output Voltage
Input
Ground
No connect
Output
(1) :
(2)(5) :
(3)(4) :
(6) :
■ Frequency Characteristics
SFECF10M7FA00-R0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Frequency (MHz)
Attenuation (dB)
10.300 10.500 10.700 10.900 11.100
G.D.T. (µsec.)
7
6
5
4
3
2
1
0
SFECF10M7FA00-R0
Frequency (MHz)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
0
10
20
30
40
50
60
70
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
21
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr MHz SMD Type SFSCE10M7 Series
SFSCE series are chip surface mount filter and
available for 3dB bandwidth at 700kHz to 1.3MHz.
(more than twice width compared with current types)
They have 1.0mm max. thickness and small mounting area.
(4.5x3.8mm)
■ Features
1. The filters are mountable by automatic placers.
2. They are slim, at only 1.0mm max. thickness, and
have a small mounting area (4.5x3.8mm) enabling
flexible PCB design.
3. Available lead (Pb) free solder reflow.
4. Operating temperature range:
-20 to +80 (degrees C)
Storage temperature range:
-40 to +85 (degrees C)
■ Applications
1. SS digital communication system
2. Digital wireless audio
3. PHS Evolution system
4. RFID Reader Writer
5. RKE
(3.5)
(in mm)
*
0.4
3.8(1.8)
4.5
(1) (2)
(4) (3)
(4.0)
1.0 max.0.85 0.150.3
(1)
(2)
(3)
(4)
Tolerance unless
otherwise specified : ±0.1
( )
: Input
: Output
: No Connect
: Ground
: EIAJ Monthly Code
: Reference
*
(2.25) 1.1
0.6
0.15
(4-R0.3)
(0.3)
(1)
(4)
(2)
(3)
Part Number Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
Stop
Bandwidth
(MHz)
Insertion
Loss
(dB)
Ripple
(dB)
Spurious
Response
(dB)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
SFSCE10M7WF03-R0
10.700 fn±500.0 min. 2.2 max. (Total)
[within 20dB] 6.0 max.
[at minimum loss point] 2.0 max.
[within 3dB Bandwidth] 30/25 min.
[within 5.7MHz to fn / fn to 15.7MHz] 0.6 max.
[within fn±400kHz] 470
SFSCE10M7WF04-R0
10.700 fn±400.0 min. 1.8 max. (Total)
[within 20dB] 6.0 max.
[at minimum loss point] 1.5 max.
[within 3dB Bandwidth] 35/25 min.
[within 5.7MHz to fn / fn to 15.7MHz] 0.6 max.
[within fn±325kHz] 470
SFSCE10M7WF05-R0
10.700 fn±325.0 min. 1.7 max. (Total)
[within 20dB] 6.0 max.
[at minimum loss point] 1.5 max.
[within 3dB Bandwidth] 40/30 min.
[within 5.7MHz to fn / fn to 15.7MHz] 0.6 max.
[within fn±250kHz] 470
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
■ Test Circuit
R1+Rg=R2=Input/Output Impedance, Rg=50Ω
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1 : S.S.G. Output Voltage
(1) : Input
(2) : Output
(3) : No Connect
(4) : Ground
RF
Voltmeter
C2R2
R1
Rg
S.S.G.
(4)
(1)
(3)
(2)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
22
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics
SFSCE10M7WF03-R0
2.0
1.6
1.2
0.8
0.4
0.0
Frequency (MHz)
Attenuation (dB)
G.D.T. (µsec.)
11.10010.3009.500 11.90011.50010.7009.900
0
2
4
6
8
10
SFSCE10M7WF03-R0
Frequency (MHz)
6.700 8.700 10.700 12.700 14.700
Attenuation (dB)
0
20
40
60
80
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
MHz SMD Type CERAFILr Notice
23
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ SFECF10M7 Series Notice (Soldering and Mounting)
1. Standard Reflow Soldering Conditions
(1) Reflow
The component cannot withstand washing.
2. Wash
Filter is soldered at +350±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(2) Soldering Iron
Temperature (°C)
100
230
260
30 sec.
min. 40 sec.
max.
Peak
(260°C max.)
Pre-heating
(150-180°C)
Heating
(230°C)
Gradual
Cooling
120 sec.
min.
60-120 sec.
Filter is soldered twice within the following temperature
conditions.
■ SFSCE10M7WF03-R0 Notice (Soldering and Mounting)
Filter is soldered twice within the following temperature
conditions.
1. Standard Reflow Soldering Conditions
(1) Reflow
The component cannot withstand washing.
2. Wash
Filter is soldered at +320±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(2) Soldering Iron
Peak
(240°C max.)
Heating
(230°C)
Gradual
Cooling
Pre-heating
(150-180°C)
100
230
240
Temperature (°C)
60-120 sec. 30 sec.
max.
30 sec.
min. 120 sec.
min.
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
MHz SMD Type CERAFILr Notice
24
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ SFSCE10M7WF04/05-R0 Notice (Soldering and Mounting)
Filter is soldered twice within the following temperature
conditions.
1. Standard Reflow Soldering Conditions
(1) Reflow
The component cannot withstand washing.
2. Wash
Filter is soldered at +320±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
(2) Soldering Iron
Peak
(260°C max.)
Heating
(230°C)
Gradual
Cooling
Pre-heating
(150-180°C)
100
230
260
Temperature (°C)
60-120 sec. 40 sec.
max.
30 sec.
min. 120 sec.
min.
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
MHz SMD Type CERAFILr Notice
25
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ SFECF10M7 Series Notice (Handling)
1. The component will be damaged when an excessive
stress is applied.
2. The component may be damaged if excess mechanical
stress is applied to it mounted on the printed circuit
board.
3. Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of the
board.
4. After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause destruction
resistance characteristics to lower. To prevent this, be
extremely careful in determining shape and dimension
before designing the circuit board diagram.
5. The component may be damaged during mounting
process if some part of mounter such as positioning
claws or nozzle are worn down. The regular maintenance
recommended for mounters should be done to prevent
trouble.
6. The component is recommended with placement
machines which employ optical placement capabilities.
The component might be damaged by excessive
mechanical force. Please make sure that you have
evaluated by using placement machines before going into
mass production. Do not use placement machines which
utilize mechanical positioning. Please contact Murata for
details beforehand.
7. When correcting chips with a soldering iron, the tip of the
soldering iron should not directly touch the chip
component. Depending on the soldering conditions, the
effective area of terminations may be reduced. The use
of solder containing Ag should be done to prevent the
electrode erosion.
8. Do not clean or wash the component as it is not
hermetically sealed.
9. In case of covering filter with over coat, conditions such
as material of resin, cure temperature, and so on should
be evaluated carefully.
10. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in re-flow soldering.
11. Accurate test circuit values are required to measure
electrical characteristics.
It may be a cause of miscorrelation if there is any
deviation, especially stray capacitance, from the test
circuit in the specification.
12. The components, packed in the moisture proof bag (dry
pack), are sensitive to moisture. The following treatment
is required before applying re-flow soldering. To avoid
reliability degradation caused by thermal stress, when
unpacked, store the component in an atmosphere at
30°C and below 60%R.H., and solder within 1 week.
13. For safety purposes, connect the output of filters to the
IF amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
[Component Layout Close to Board]
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
MHz SMD Type CERAFILr Notice
26
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ SFSCE10M7 Series Notice (Handling)
1. The component will be damaged when an excessive
stress is applied.
2. The component mounted on the PCB may be damaged if
excess mechanical stress is applied.
3. Layout the components on the PCB to minimize the
stress imposed on the warp or flexure of the board.
4. After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause destruction
resistance characteristics to lower. To prevent this, be
extremely careful in determining shape and dimension
before designing the circuit board diagram.
5. The component may be damaged during mounting
process if some part of mounter such as positioning
claws, nozzle are worn down. The regular maintenance
recommended for mounters should be done to prevent
the trouble.
6. When correcting component’s position with a soldering
iron, the tip of the soldering iron should not directly touch
the chip component.
7. Do not clean or wash the component as it is not
hermetically sealed.
8. In case of overcoating the part, coating conditions such
as material of resin, curing temperature, and so on
should be evaluated carefully.
9. Do not use strong acidity flux, more than 0.2wt% chlorine
content, in re-flow soldering.
10. Accurate test circuit values are required to measure
electrical characteristics. It may be a cause of mis-
correlation if there is any deviation, especially stray
capacitance, from the test circuit in the specification.
11. The component is recommended with placement
machines which employ optical placement capabilities.
The component might be damaged by excessive
mechanical force. Please make sure that you have
evaluated by using placement machines before going
into mass production. Do not use placement machines
which utilize mechanical positioning. Please contact
Murata for details beforehand.
12. For safety purposes, connect the output of filters to the
IF amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
[Component direction]
[Component layout close to board]
Put the compon-
ent laterally to
the direction in
which stress
acts.
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
SMD Type CERAFILr Standard Land Pattern Dimensions
27
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ SFPKA Series
(in mm)
2.02.475 6.95
1.61.55 7.45 0.80.9
0.925 2.0 2.0
1.1
■ CFUKG/CFUKF Series
(in mm)
1.2 0.7 0.7
1.4 1.2
2.03.52.0
■ CFWKA Series
(in mm)
1.2 3.0
3.0 5.5
4-R3.0
11.5
7.5
6.5
1.6
2.1
1.8
0.5
■ SFECF10M7 Series
Input
Ground
No connect
Output
(1) :
(2)(5) :
(3)(4) :
(6) :
(in mm)
It shows solder resist land pattern.
1.051.401.05
0.10.10.10.1
0.8 0.6 0.8 0.6 0.8
0.1 0.1
0.3
0.3
0.3
(6) (5) (4)
(1) (2) (3)
■ SFSCE10M Series
(in mm)
It shows solder resist land pattern.
(1) : Input
(2) : Output
(3) : No Connect
(4) : Ground
0.5
0.5
1.4
0.1 0.1
0.1
1.05
(3) (4)
(2) (1)
0.81.15 1.3
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
kHz SMD Type CERAFILr Packaging
28
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Minimum Quantity
Part Number ø180mm
450
450
350
ø330mm
1,000SFPKA
CFUKG
CFUKF
CFWKA
■ SFPKA Series
Dimensions of Carrier Tape
User direction of feed
12.0±0.1
16.0±0.2
8.8±0.1
7.5±0.1 1.75±0.1
4.0±0.1
2.0±0.1
5.3±0.1
ø1.5
7.4±0.1
+0.1
-0
Cover film
(in mm)
Dimensions of Reel
Label
ø13.0±0.2
2.2±0.5
21.5±1.0
330±2
80±1
240 to 280
400 to 560
160 to 190
17.5±0.5
EmptyComponents
Cover film
Empty
Trailer Leader
• Part number marked side is always facing upside.
■ CFUKG/CFUKF Series
+1.0
-0
+0
-3.0
Dimensions of Carrier Tape Dimensions of Reel
(in mm)
Leader
Cover film
Empty EmptyComponents
Trailer
160 to 190
160 to 200
400 to 560
(ø60 )
(ø180 )
17.0±1.0
19.4±0.3
ø13.0±0.5
2.0±0.2
• Part number marked side is always facing upside.
User direction of feed
Cover film
+0.1
-0.0
4.0±0.1
7.5±0.1 1.75±0.1
6.76±0.1
16.0±0.2
8.1±0.1
4.2±0.1
7.7±0.1
8.0±0.1
6.7±0.1
6.3±0.1
2.0±0.1 ø1.5
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
kHz SMD Type CERAFILr Packaging
29
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ CFWKA Series
Dimensions of Carrier Tape Dimensions of Reel
(in mm)
User direction of feed
+0.1
-0.0
4.0±0.1
11.5±0.1 1.75±0.1
24.0±0.3
12.4±0.1
3.2±0.1
0.4±0.1
12.0±0.1
12.0±0.1
2.0±0.1 ø1.5
Cover film
8.1±0.1
7.7±0.1
(ø62.0±1.0)
(ø178±2.0)
25.5±1.0
29.9±1.0
Leader
Cover film
Empty EmptyComponents
Trailer
160 to 190
240 to 280
400 to 560
ø13.0±0.5
2.0±0.2
• Part number marked side is always facing upside.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
MHz SMD Type CERAFILr Packaging
30
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Minimum Quantity
Part Number ø180mm
2,000
1,500
ø330mm
SFECF
SFSCE
■ SFECF10M7 Series
( ) : Reference
(in mm)
Dimensions of Carrier Tape Dimensions of Reel
ø13.0±0.5
2.0±0.5
240 to 280
400 to 560
160 to 190
Empty
Components
Cover film
Empty
Trailer Leader
17.0±1.0
+1.0
-0
13.0
+0
-1.5
180
+1.0
-0
60
Chip filter
ø1.55±0.05
User direction of feed
Cover film
Peeling strength
(0.1 to 0.7N)
0.3±0.05
1.84±0.1
(0.05)
(3˚)
10˚ max.
5.5±0.05
4.1±0.1
1.75±0.1
3° max.
4.1±0.1
4.0±0.1
2.0±0.05
4.0±0.1
3.35
12.0±0.2
+0.1
-0.05
• Part number marked side is always facing upside.
■ SFSCE10M7 Series
(in mm)
Dimensions of Carrier Tape Dimensions of Reel
• Part Number marked side is always facing upside.
4.0±0.1 2.0±0.05
1.75±0.1
5.5±0.05
12.0±0.2
8.0±0.1
(3°)
1.1±0.1
0.3±0.05
5.0±0.1 3° max.
ø1.55±0.05
ø1.55±0.05
User direction of feed
4.3±0.1 10° max.
Cover film
Peeling strength
0.1 to 0.7N
0.3±0.05
0.05
ø13.0±0.5
2.0±0.5
240 to 280
400 to 560
160 to 190
Empty
Components
Cover film
Empty
Trailer Leader
17.0±1.0
+1.0
-0
13.0
+0
-1.5
180
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
31
9
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case General Use CFULA Series
CFULA series are high selectivity ceramic filters,
which consist of 4 ceramic elements connected in a
ladder form.
Most suitable for digital communications and cellular
phones because of their improved GDT characteristics.
■ Features
1. High selectivity
2. A variety of bandwidths available
3. Excellent GDT characteristics are available within
pass bandwidth.
4. Easily mounted on a printed circuit board
5. Operating temperature range: -20 to +80 (degrees C)
Storage temperature range: -40 to +85 (degrees C)
3.0±0.3 7.0±0.3
4.2±0.3 7.3±0.3
0.8±0.1
0.6±0.1
1.2±0.5
8.0±0.3
MARKING
EIAJ
CODE
3.3±0.5
2.7±0.3
(1)(2)
(3)
0.3±0.1
1.5 max.
0.15±0.05
Connection
(1) : Input
(2) : Ground
(3) : Output
(in mm)
Part Number Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion
Loss
(dB)
Input/Output
Impedance
(ohm)
CFULA455KB2A-B0 455
±2.0kHz fn±15.0
min. fn±30.0 max.
[within 40dB] 27 min.
[within fn±100kHz] 4.0 max.
[at minimum loss point] 1500
CFULA455KC2A-B0 455
±2.0kHz fn±12.5
min. fn±24.0 max.
[within 40dB] 27 min.
[within fn±100kHz] 4.0 max.
[at minimum loss point] 1500
CFULA455KD4A-B0 455
±1.5kHz fn±10.0
min. fn±20.0 max.
[within 40dB] 27 min.
[within fn±100kHz] 4.0 max.
[at minimum loss point] 1500
CFULA455KE4A-B0 455
±1.5kHz fn±7.5
min. fn±15.0 max.
[within 40dB] 27 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 1500
CFULA455KF4A-B0 455
±1.5kHz fn±6.0
min. fn±12.5 max.
[within 40dB] 27 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 2000
CFULA455KG1A-B0 455
±1.0kHz fn±4.5
min. fn±10.0 max.
[within 40dB] 25 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 2000
CFULA455KH1A-B0 455
±1.0kHz fn±3.0
min. fn±9.0 max.
[within 40dB] 35 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 2000
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
■ Test Circuit
E1
R1
Rg
S.S.G.
0dBm
R2 E2 RF Voltmeter
Connection
(1) : Input
(2) : Ground
(3) : Output
(1) (2)
(3)
Rg+R1=R2=Input/Output Impedance
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
32
9
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics
CFULA455KE4A-B0
100
40
30
20
10
0
Attenuation (dB)
0
50
100
150
200
G.D.T. (µsec.)
430 455 480
Frequency (kHz)
90
80
70
60
50
CFULA455KE4A-B0
100
40
30
20
10
0
Attenuation (dB)
200 Frequency (kHz)
90
80
70
60
50
300 400 500 600 700 800 900 1000
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
33
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case General Use CFWLA Series
Ceramic filter CFWLA series are low profile high
selectivity ceramic filters which use 6 elements in
ladder form.
They are best suitable to high-class transceivers,
cordless telephones and amateur radios.
■ Features
1. Low profile, high selectivity
2. Available bandwidths are B to J as standard
3. Easily mountable on any PC board
4. Operating temperature range: -20 to +80 (degrees C)
Storage temperature range: -40 to +85 (degrees C)
4.3±0.3
0.15
1.5 max.
2.3±0.5 2.0±0.3
2.9±0.3
11.0±0.5
MARKING
EIAJ
CODE
1.2±0.5
(1)(2)
(4) (3)
(5)
1.35±0.5
7.0±0.5
3.5±0.5
0.6±0.1
0.8±0.1
7.5±0.5
2.6±0.3
Connection
(1) : Input
(2)(3)(4) : Ground
(5) : Output
(in mm)
2.92.9——0.30.3
2.9±0.3
Part Number Nominal Center
Frequency (fn)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion
Loss
(dB)
Ripple
(dB)
Input/Output
Impedance
(ohm)
CFWLA455KBFA-B0 455.0 fn±15.0
min. fn±30.0 max.
[within 50dB] 35 min.
[within fn±100kHz] 4.0 max.
[at minimum loss point] 3.0 max.
[within fn±10kHz] 1500
CFWLA455KCFA-B0 455.0 fn±12.5
min. fn±24.0 max.
[within 50dB] 35 min.
[within fn±100kHz] 4.0 max.
[at minimum loss point] 3.0 max.
[within fn±8kHz] 1500
CFWLA455KDFA-B0 455.0 fn±10.0
min. fn±20.0 max.
[within 50dB] 35 min.
[within fn±100kHz] 4.0 max.
[at minimum loss point] 3.0 max.
[within fn±7kHz] 1500
CFWLA455KEFA-B0 455.0 fn±7.5
min. fn±15.0 max.
[within 50dB] 35 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 3.0 max.
[within fn±5kHz] 1500
CFWLA455KFFA-B0 455.0 fn±6.0
min. fn±12.5 max.
[within 50dB] 35 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 3.0 max.
[within fn±4kHz] 2000
CFWLA455KGFA-B0 455.0 fn±4.5
min. fn±10.0 max.
[within 50dB] 35 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 2.0 max.
[within fn±3kHz] 2000
CFWLA455KHFA-B0 455.0 fn±3.0
min. fn±9.0 max.
[within 50dB] 60 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 2.0 max.
[within fn±2kHz] 2000
CFWLA455KJFA-B0 455.0 fn±2.0
min. fn±7.5 max.
[within 50dB] 60 min.
[within fn±100kHz] 7.0 max.
[at minimum loss point] 2.0 max.
[within fn±1.5kHz] 2000
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
■ Test Circuit
E1
R1
R2 E2 RF Voltmeter
Connection
(1) : Input
(5) : Output
(2)(3)(4) : Ground
Rg
S.S.G.
0dBm
(1)(2) (3) (4)
(5)
Rg+R1=R2=Input/Output Impedance
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
34
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics
CFWLA455KEFA-B0
100
40
30
20
10
0
Attenuation (dB)
0
100
200
300
400
G.D.T. (µsec.)
430 455 480
Frequency (kHz)
90
80
70
60
50
CFWLA455KEFA-B0
100
40
30
20
10
0
Attenuation (dB)
200 Frequency (kHz)
90
80
70
60
50
300 400 500 600 700 800 900 1000
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
35
11
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Miniaturized Type CFULB Series
CFULB series ceramic filters are miniature, high
performance ceramic filters composed of piezoelectric
elements connected in a ladder form.
These filters, only 6.3mm high, are 65% the
volume of conventional types.
They are well suited for miniaturizing various kinds
of communications equipment, pocket pagers, car
radios, cordless telephones and mobile telephones.
■ Features
1. Miniature and high selectivity
2. A variety of bandwidths are available
3. Operating temperature range: -20 to +80 (degrees C)
Storage temperature range: -40 to +85 (degrees C)
4.3±0.3
1.0 max.
1.8±0.3
2.4±0.3
6.5±0.3
0.8±0.3
1.0
±
0.3
6.3±0.3 6.5±0.3
0.5±0.1
0.7±0.1
3.5±0.3
0.7±0.3
(1) (2)
(3) (4)
0.15±0.05
Connection
(1) : Input
(2) : Output
(3) : Ground
(4)
(in mm)
}
MARKING
EIAJ
CODE
Part Number Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion
Loss
(dB)
Input/Output
Impedance
(ohm)
CFULB455KB2A-B0 455
±2.0kHz fn±15.0
min. fn±30.0 max.
[within 40dB] 27 min.
[within fn±100kHz] 4.0 max.
[at minimum loss point] 1500
CFULB455KC2A-B0 455
±2.0kHz fn±12.5
min. fn±24.0 max.
[within 40dB] 27 min.
[within fn±100kHz] 4.0 max.
[at minimum loss point] 1500
CFULB455KD4A-B0 455
±1.5kHz fn±10.0
min. fn±20.0 max.
[within 40dB] 27 min.
[within fn±100kHz] 4.0 max.
[at minimum loss point] 1500
CFULB455KE4A-B0 455
±1.5kHz fn±7.5
min. fn±15.0 max.
[within 40dB] 27 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 1500
CFULB455KF4A-B0 455
±1.5kHz fn±6.0
min. fn±12.5 max.
[within 40dB] 27 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 2000
CFULB455KG1A-B0 455
±1.0kHz fn±4.5
min. fn±10.0 max.
[within 40dB] 25 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 2000
CFULB455KH1A-B0 455
±1.0kHz fn±3.0
min. fn±9.0 max.
[within 40dB] 35 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 2000
CFULB455KJ1A-B0 455
±1.0kHz fn±2.0
min. fn±7.5 max.
[within 40dB] 35 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 2000
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
CFULB455K_series filters are 4-element ceramic filters and miniature versions of CFULA455K_series.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
36
11
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Test Circuit
E1
R1
Rg
S.S.G.
0dBm
R2 E2 RF Voltmeter
Connection
(1) : Input
(2) : Output
(3)(4) :Ground
(1) (2)
(3) (4)
Rg+R1=R2=Input/Output Impedance
■ Frequency Characteristics
CFULB455KE4A-B0
100
40
30
20
10
0
Attenuation (dB)
0
50
100
150
200
G.D.T. (µsec.)
430 455 480
Frequency (kHz)
90
80
70
60
50
CFULB455KE4A-B0
100
40
30
20
10
0
Attenuation (dB)
200 Frequency (kHz)
90
80
70
60
50
300 400 500 600 700 800 900 1000
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
37
12
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Miniaturized Type CFWLB Series
CFWLB series ceramic filters are miniature, high
performance ceramic filters composed of piezoelectric
elements connected in a ladder form.
These filters, only 6.3mm high, are 67% the volume
of conventional types.
They are well suited for miniaturizing various kinds
of communications equipment, pocket pagers, pagers,
car radios, cordless telephones and mobile telephones.
■ Features
1. Miniature and high selectivity
2. A variety of bandwidths are available.
3. Operating temperature range: -20 to +80 (degrees C)
Storage temperature range: -40 to +85 (degrees C)
4.3±0.3
1.0 max.
2.7±0.3
2.5±0.3
9.5±0.3
0.7±0.3
1.0±0.3 6.3±0.3 6.5±0.3
0.5±0.1
0.7±0.1
3.5±0.3
0.9±0.3
0.15±0.05
(1)
(3) (4)
(2)
(5)
2.8±0.3 Connection
(1) : Input
(2) : Output
(3)
(4) : Ground
(5)
(in mm)
}
MARKING
EIAJ
CODE
Part Number Nominal Center
Frequency (fn)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion
Loss
(dB)
Input/Output
Impedance
(ohm)
CFWLB455KBFA-B0 455.0 fn±15.0
min. fn±30.0 max.
[within 50dB] 35 min.
[within fn±100kHz] 4.0 max.
[at minimum loss point] 1500
CFWLB455KCFA-B0 455.0 fn±12.5
min. fn±24.0 max.
[within 50dB] 35 min.
[within fn±100kHz] 4.0 max.
[at minimum loss point] 1500
CFWLB455KDFA-B0 455.0 fn±10.0
min. fn±20.0 max.
[within 50dB] 35 min.
[within fn±100kHz] 4.0 max.
[at minimum loss point] 1500
CFWLB455KEFA-B0 455.0 fn±7.5
min. fn±15.0 max.
[within 50dB] 35 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 1500
CFWLB455KEFA004-B0 455.0 fn±7.5
min. fn±15.0 max.
[within 60dB] 60 min.
[within fn±15kHz to 30kHz] 5.0 max.
[at fn] 1500
CFWLB455KFFA-B0 455.0 fn±6.0
min. fn±12.5 max.
[within 50dB] 35 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 2000
CFWLB455KGFA-B0 455.0 fn±4.5
min. fn±10.0 max.
[within 50dB] 35 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 2000
CFWLB455KHFA-B0 455.0 fn±3.0
min. fn±9.0 max.
[within 50dB] 55 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 2000
CFWLB455KJFA-B0 455.0 fn±2.0
min. fn±7.0 max.
[within 50dB] 55 min.
[within fn±100kHz] 7.0 max.
[at minimum loss point] 2000
CFWLB455K_series filters are 4-element ceramic filters and miniature versions of CFWLA455K_series.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
38
12
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Test Circuit
(1) (2)
(3) (4) (5)
R1
R2 E2E1
Rg
S.S.G.
0dBm
RF Voltmeter
Connection
(1) : Input
(3)(4)(5) : Ground
(2) : Output
Rg+R1=R2=Input/Output Impedance
■ Frequency Characteristics
CFWLB455KEFA-B0
100
40
30
20
10
0
Attenuation (dB)
0
50
100
200
G.D.T. (µsec.)
430 455 480
Frequency (kHz)
90
80
70
60
50
150
CFWLB455KEFA-B0
100
40
30
20
10
0
Attenuation (dB)
200 Frequency (kHz)
90
80
70
60
50
300 400 500 600 700 800 900 1000
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
39
13
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Group Delay Flat Type CFULA_Y Series
CFULA_Y series are high selectivity ceramic filters,
which consist of 4 ceramic elements connected in a
ladder form.
Most suitable for digital communications and cellular
phones because of their improved GDT characteristics.
■ Features
1. High selectivity
2. A variety of bandwidths are available.
3. Excellent GDT characteristics are available within
pass bandwidth.
4. Easily mounted on a printed circuit board
5. Operating temperature range: -20 to +80 (degrees C)
Storage temperature range: -40 to +85 (degrees C)
3.0±0.3 7.0±0.3
4.2±0.3 7.3±0.3
0.8±0.1
0.6±0.1
1.2±0.5
8.0±0.3
MARKING
EIAJ
CODE
3.3±0.5
2.7±0.3
(1)(2)
(3)
0.3±0.1
1.5 max.
0.15±0.05
Connection
(1) : Input
(2) : Ground
(3) : Output
(in mm)
Part Number Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion
Loss
(dB)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
CFULA455KB4Y-B0 455
±1.5kHz fn±15.0
min. fn±35.0 max.
[within 40dB] 25 min.
[within fn±100kHz] 5.0 max.
[at minimum loss point] 15.0 max.
[within fn±10kHz] 1500
CFULA455KC4Y-B0 455
±1.5kHz fn±12.5
min. fn±30.0 max.
[within 40dB] 25 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 15.0 max.
[within fn±8kHz] 1500
CFULA455KD1Y-B0 455
±1.0kHz fn±10.0
min. fn±25.0 max.
[within 40dB] 23 min.
[within fn±100kHz] 7.0 max.
[at minimum loss point] 20.0 max.
[within fn±7kHz] 1500
CFULA455KE1Y-B0 455
±1.0kHz fn±7.5
min. fn±20.0 max.
[within 40dB] 23 min.
[within fn±100kHz] 8.0 max.
[at minimum loss point] 20.0 max.
[within fn±5kHz] 1500
CFULA455KF1Y-B0 455
±1.0kHz fn±6.0
min. fn±17.5 max.
[within 40dB] 23 min.
[within fn±100kHz] 9.0 max.
[at minimum loss point] 20.0 max.
[within fn±4kHz] 2000
CFULA455KG1Y-B0 455
±1.0kHz fn±4.5
min. fn±15.0 max.
[within 40dB] 23 min.
[within fn±100kHz] 10.0 max.
[at minimum loss point] 20.0 max.
[within fn±3kHz] 2000
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
■ Test Circuit
E1
R1
Rg
S.S.G.
0dBm
R2 E2 RF Voltmeter
Connection
(1) : Input
(2) : Ground
(3) : Output
(1) (2)
(3)
Rg+R1=R2=Input/Output Impedance
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
40
13
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics
CFULA455KE1Y-B0
Attenuation (dB)
Frequency (kHz)
Group Delay Time (µsec)
430 455 480
10
20
30
40
50
60
70
80
90
100
200
150
100
50
0
0CFULA455KE1Y-B0
200 300 400 500 600 700 800 900 1000
10
20
30
40
50
60
70
80
90
Attenuation (dB)
Frequency (kHz)
0
100
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
41
14
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Group Delay Flat Type CFWLA_Y Series
CFWLA_Y series are high selectivity ceramic filters,
which consist of 6 ceramic elements connected in a
ladder form.
Most suitable for digital communications and mobile
telephones because of their improved GDT
characteristics.
■ Features
1. High selectivity
2. A variety of bandwidths are available
3. Excellent GDT characteristics are available within
pass bandwidth.
4. Easily mounted on a printed circuit board
5. Operating temperature range: -20 to +80 (degrees C)
Storage temperature range: -40 to +85 (degrees C)
4.3±0.3
0.15
1.5 max.
2.3±0.5 2.0±0.3
2.9±0.3
11.0±0.5
MARKING
EIAJ
CODE
1.2±0.5
(1)(2)
(4) (3)
(5)
1.35±0.5
7.0±0.5
3.5±0.5
0.6±0.1
0.8±0.1
7.5±0.5
2.6±0.3
Connection
(1) : Input
(2)(3)(4) : Ground
(5) : Output
(in mm)
2.92.9——0.30.3
2.9±0.3
Part Number Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion
Loss
(dB)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
CFWLA455KB4Y-B0 455
±1.5kHz fn±15.0
min. fn±30.0 max.
[within 50dB] 40 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 30.0 max.
[within fn±10kHz] 1500
CFWLA455KC4Y-B0 455
±1.5kHz fn±12.5
min. fn±27.5 max.
[within 50dB] 40 min.
[within fn±100kHz] 7.0 max.
[at minimum loss point] 30.0 max.
[within fn±8kHz] 1500
CFWLA455KD1Y-B0 455
±1.0kHz fn±10.0
min. fn±25.0 max.
[within 50dB] 40 min.
[within fn±100kHz] 8.0 max.
[at minimum loss point] 30.0 max.
[within fn±7kHz] 1500
CFWLA455KE1Y-B0 455
±1.0kHz fn±7.5
min. fn±20.0 max.
[within 50dB] 40 min.
[within fn±100kHz] 9.0 max.
[at minimum loss point] 30.0 max.
[within fn±5kHz] 1500
CFWLA455KF1Y-B0 455
±1.0kHz fn±6.0
min. fn±17.5 max.
[within 50dB] 40 min.
[within fn±100kHz] 10.0 max.
[at minimum loss point] 40.0 max.
[within fn±4kHz] 2000
CFWLA455KG1Y-B0 455
±1.0kHz fn±4.5
min. fn±15.0 max.
[within 50dB] 40 min.
[within fn±100kHz] 11.0 max.
[at minimum loss point] 40.0 max.
[within fn±3kHz] 2000
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
■ Test Circuit
E1
R1
R2 E2 RF Voltmeter
Connection
(1) : Input
(5) : Output
(2)(3)(4) : Ground
Rg
S.S.G.
0dBm
(1)(2) (3) (4)
(5)
Rg+R1=R2=Input/Output Impedance
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
42
14
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics
CFWLA455KE1Y-B0
Attenuation (dB)
430 455 480
Frequency (kHz)
10
20
30
40
50
60
70
80
90
100
400
300
200
100
0
Group Delay Time (µsec)
0CFWLA455KE1Y-B0
200 300 400 500 600 700 800 900 1000
10
20
30
40
50
60
70
80
90
Attenuation (dB)
Frequency (kHz)
0
100
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
43
15
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Group Delay Flat Type Miniaturized Type CFULB_Y Series
Ceramic filter CFULB_Y series are miniature and high
performance filters. These filters, only 6.3mm
high, are 65% the volume of conventional types.
Well suited for miniaturizing communications
equipment, especially for a cellular phone.
■ Features
1. Miniature, flat GDT characteristics
2. Suitable for a cellular phone
3. A variety of bandwidths are available.
4. Operating temperature range: -20 to +80 (degrees C)
Storage temperature range: -40 to +85 (degrees C)
4.3±0.3
1.0 max.
1.8±0.3
2.4±0.3
6.5±0.3
0.8±0.3
1.0
±
0.3
6.3±0.3 6.5±0.3
0.5±0.1
0.7±0.1
3.5±0.3
0.7±0.3
(1) (2)
(3) (4)
0.15±0.05
Connection
(1) : Input
(2) : Output
(3) : Ground
(4)
(in mm)
}
MARKING
EIAJ
CODE
Part Number Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion
Loss
(dB)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
CFULB455KB4Y-B0 455
±1.5kHz fn±15.0
min. fn±35.0 max.
[within 40dB] 25 min.
[within fn±100kHz] 5.0 max.
[at minimum loss point] 15.0 max.
[within fn±10kHz] 1500
CFULB455KC4Y-B0 455
±1.5kHz fn±12.5
min. fn±30.0 max.
[within 40dB] 25 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 15.0 max.
[within fn±8kHz] 1500
CFULB455KD1Y-B0 455
±1.0kHz fn±10.0
min. fn±25.0 max.
[within 40dB] 23 min.
[within fn±100kHz] 7.0 max.
[at minimum loss point] 20.0 max.
[within fn±7kHz] 1500
CFULB455KE1Y-B0 455
±1.0kHz fn±7.5
min. fn±20.0 max.
[within 40dB] 23 min.
[within fn±100kHz] 8.0 max.
[at minimum loss point] 20.0 max.
[within fn±5kHz] 1500
CFULB455KF1Y-B0 455
±1.0kHz fn±6.0
min. fn±17.5 max.
[within 40dB] 23 min.
[within fn±100kHz] 9.0 max.
[at minimum loss point] 20.0 max.
[within fn±4kHz] 2000
CFULB455KG1Y-B0 455
±1.0kHz fn±4.5
min. fn±15.0 max.
[within 40dB] 23 min.
[within fn±100kHz] 10.0 max.
[at minimum loss point] 20.0 max.
[within fn±3kHz] 2000
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
CFULB455K_Y series filters are 4-element ceramic filters and miniature versions of CFULA455K_Y series.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
■ Test Circuit
E1
R1
Rg
S.S.G.
0dBm
R2 E2 RF Voltmeter
Connection
(1) : Input
(2) : Output
(3)(4) :Ground
(1) (2)
(3) (4)
Rg+R1=R2=Input/Output Impedance
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
44
15
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics
CFULB455KE1Y-B0
Attenuation (dB)
Frequency (kHz)
Group Delay Time (µsec)
430 455 480
10
20
30
40
50
60
70
80
90
100
200
150
100
50
0
0CFULB455KE1Y-B0
200 300 400 500 600 700 800 900 1000
10
20
30
40
50
60
70
80
90
Attenuation (dB)
Frequency (kHz)
0
100
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
45
16
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFILr Plastic Case Group Delay Flat Type CFWLB_Y Series
Ceramic filter CFWLB_Y series are miniature and
high-performance filters. These filters, only
6.3mm high, are 67% the volume of conventional types.
Well suited for miniaturizing communications
equipment, especially for a cellular phone.
■ Features
1. Miniature, flat GDT characteristics
2. Suitable for a cellular phone
3. A variety of bandwidths are available.
4. Operating temperature range: -20 to +80 (degrees C)
Storage temperature range: -40 to +85 (degrees C)
4.3±0.3
1.0 max.
2.7±0.3
2.5±0.3
9.5±0.3
0.7±0.3
1.0±0.3 6.3±0.3 6.5±0.3
0.5±0.1
0.7±0.1
3.5±0.3
0.9±0.3
0.15±0.05
(1)
(3) (4)
(2)
(5)
2.8±0.3 Connection
(1) : Input
(2) : Output
(3)
(4) : Ground
(5)
(in mm)
}
MARKING
EIAJ
CODE
Part Number Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Insertion
Loss
(dB)
GDT Deviation
(µs)
Input/Output
Impedance
(ohm)
CFWLB455KB4Y-B0 455
±1.5kHz fn±15.0
min. fn±30.0 max.
[within 50dB] 40 min.
[within fn±100kHz] 6.0 max.
[at minimum loss point] 30.0 max.
[within fn±10kHz] 1500
CFWLB455KC4Y-B0 455
±1.5kHz fn±12.5
min. fn±27.5 max.
[within 50dB] 40 min.
[within fn±100kHz] 7.0 max.
[at minimum loss point] 30.0 max.
[within fn±8kHz] 1500
CFWLB455KD1Y-B0 455
±1.0kHz fn±10.0
min. fn±25.0 max.
[within 50dB] 40 min.
[within fn±100kHz] 8.0 max.
[at minimum loss point] 30.0 max.
[within fn±7kHz] 1500
CFWLB455KE1Y-B0 455
±1.0kHz fn±7.5
min. fn±20.0 max.
[within 50dB] 40 min.
[within fn±100kHz] 9.0 max.
[at minimum loss point] 30.0 max.
[within fn±5kHz] 1500
CFWLB455KF1Y-B0 455
±1.0kHz fn±6.0
min. fn±17.5 max.
[within 50dB] 35 min.
[within fn±100kHz] 10.0 max.
[at minimum loss point] 40.0 max.
[within fn±4kHz] 2000
CFWLB455KG1Y-B0 455
±1.0kHz fn±4.5
min. fn±15.0 max.
[within 50dB] 40 min.
[within fn±100kHz] 11.0 max.
[at minimum loss point] 40.0 max.
[within fn±3kHz] 2000
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHz.
CFWLB455K_Y series filters are 4-element ceramic filters and miniature versions of CFWLA455K_Y series.
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
■ Test Circuit
(1) (2)
(3) (4) (5)
R1
R2 E2E1
Rg
S.S.G.
0dBm
RF Voltmeter
Connection
(1) : Input
(3)(4)(5) : Ground
(2) : Output
Rg+R1=R2=Input/Output Impedance
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
46
16
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Frequency Characteristics
CFWLB455KE1Y-B0
Attenuation (dB)
430 455 480
Frequency (kHz)
10
20
30
40
50
60
70
80
90
100
200
150
100
50
0
Group Delay Time (µsec)
0CFWLB455KE1Y-B0
200 300 400 500 600 700 800 900 1000
10
20
30
40
50
60
70
80
90
Attenuation (dB)
Frequency (kHz)
0
100
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
Plastic Case Type CERAFILr Minimum Quantity/Notice
47
16
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Minimum Quantity
Part Number Bulk Magazine
200
250
150
150
80
50
55
CFULA Series
CFULB Series
CFWLA Series
CFWLB Series
(pcs.)
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
■ Notice (Handling)
1. Do not use this product with bend. The component
may be damaged if excessive mechanical stress is
applied to it mounted on the printed circuit board.
2. The component will be damaged when an excessive
stress is applied.
3. All kinds of re-flow soldering must not be applied
on the component.
4. Do not clean or wash the component as it is not
hermetically sealed.
5. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in flow soldering.
6. In case of covering filter with over coat,
conditions such as material of resin, cure
temperature, and so on should be evaluated
carefully.
7. Accurate test circuit values are required to
measure electrical characteristics.
It may be a cause of miscorrelation if there is
any deviation, especially stray capacitance, from
the test circuit in the specification.
8. For safety purposes, connect the output of filters
to the IF amplifier through a D.C. blocking
capacitor. Avoid applying a direct current to the
output of ceramic filters.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
48
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Discriminators for Communications Equipment
kHz Type Ceramic Discriminators
Ceramic discriminator consists of wide band
piezoelectric resonator.
It is ideal for mobile communications equipment due to
its small size and light weight.
Standard line include products for wide range of
applications, from cordless telecom to cellular
telephone. Practically adjustment free at the detection
circuit, small size is suitable for downsizing.
■ Features
1. Small in size and light weight
2. Adjustment free at detection circuit
3. High sensitivity and stability
4. Wide range of standard products are available for
various ICs.
5. Operating temperature range: -20 to +80 (degrees C)
Storage temperature range: -40 to +85 (degrees C)
MARKING
EIAJ
CODE
6.6±0.3
1.5±0.3
6.0±0.2
1.15±0.2
1.0±0.1
3.7±0.2
3.1 max.
6.2±0.2
(in mm)
CDBKB Series
0.25±0.05
5.0±0.2 (in mm)
MARKING
EIAJ
CODE
3.5±0.5 9.0±0.3 3.5±0.3
1.5 max.
0.1±0.05
1.75±0.5
0.8±0.1
1.1±0.1
7.0±0.3
CDBLA Series
(in mm)
MARKING
EIAJ
CODE
0.6±0.2
1.8±0.2
6.3 max.
4.2±0.2
6.0±0.2
0.5±0.1 0.15±0.05
0.9±0.2
3.0±0.3
6.0 max.
4.2±0.5
CDBLB_CAX Series
(in mm)
MARKING
EIAJ
CODE
1.5±0.3
1.0±0.3
0.5±0.2
6.3 max.
4.2±0.2
6.0±0.2
0.5±0.1 0.15±0.05
0.9±0.2
3.0±0.3
6.0 max.
4.2±0.5
CDBLB_CAY Series
Specified by Impedance Characteristics (Type 1)
Part Number Nominal Center
Frequency (fn)
(kHz)
Inclination of
Impedance Curve (1) Inclination of
Impedance Curve (2) Capacitance
(C) IC IC Maker Type
CDBLB455KCAX02-B0 455 447.0±1.5kHz
(at |Z|=2.05kohm) 463.0±1.5kHz
(at |Z|=10.0kohm) 140pF±20% TA8104F TOSHIBA Lead
CDBLB455KCAX31-B0 455 447.0±1.5kHz
(at |Z|=2.05kohm) 463.0±1.5kHz
(at |Z|=10.0kohm) 140pF±20% TA31141 TOSHIBA Lead
For safety purposes, avoid applying a direct current between the terminals.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
49
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Impedance Curve
CDBLB455KCAX02-B0
500K
180
50K 90
10K
5K 0
1K
500 −90
100 −180
Impedance (Ω)
Phase (deg)
400 420 440 460 480
Frequency (kHz) 500
100K
50
CDBLB455KCAX31-B0
500K
180
50K 90
10K
5K 0
1K
500 −90
100 −180
Impedance (Ω)
Phase (deg)
400 420 440 460 480
Frequency (kHz) 500
100K
50
Specified by Impedance Characteristics (Type 2)
Part Number Nominal Center
Frequency (fn) Anti-resonant
Frequency (Fa) Delta F
(Fa-Fr) Resonant
Resistance (R) Capacitance
(C) IC IC Maker Type
CDBKB455KCAX33-R0 - 462.0±1.5kHz 40±4.0kHz 200ohm max. 150pF±20% CXA1474 SONY SMD
CDBLA455KCAY03-B0 - 455.0±1.5kHz 48±5.0kHz 70ohm max. 600pF±20% CXA1184M SONY Lead
CDBLB455KCAY03-B0 - 455.0±1.5kHz 46±5.0kHz 70ohm max. 550pF±20% CXA1184M SONY Lead
CDBLB455KCAX15-B0 - 463.5±1.0kHz 43±2.0kHz 300ohm max. 140pF±20% CXA1183M SONY Lead
CDBLB455KCAX25-B0 - 465.0±1.5kHz 45±4.0kHz 300ohm max. 135pF±20% CXA1484 SONY Lead
CDBLB455KCAX33-B0 - 465.0±1.5kHz 45±4.0kHz 300ohm max. 135pF±20% CXA1474 SONY Lead
For safety purposes, avoid applying a direct current between the terminals.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
■ Impedance Curve
CDBLA/CDBLB455KCAY03-B0
100K
180
5K
90
1K
500
0
100
50
−90
−180
Impedance (Ω)
380 400 420 440 460
Frequency (kHz) 480
10K
10
50K
Phase (deg)
CDBLB455KCAX15-B0
500K
180
50K 90
10K
5K 0
1K
500 −90
100 −180
Impedance (Ω)
Phase (deg)
390 410 430 450 470
Frequency (kHz) 490
100K
50
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
50
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Impedance Curve
CDBLB455KCAX25-B0
500K 180
50K 90
10K
5K 0
1K
500 −90
100
−180
Impedance (Ω)
Phase (deg)
400 420 440 460 480
Frequency (kHz) 500
100K
50
CDBKB455KCAX33-R0
500K
100K
10K
Impedance (Ω)
Phase (deg)
400 420 440 460 480 500
Frequency (kHz)
500
50
180
50K 90
5K 0
−90
1K
−180
100
CDBLB455KCAX33-B0
500K
100K
10K
Impedance (Ω)
Phase (deg)
400 420 440 460 480 500
Frequency (kHz)
500
50
180
50K 90
5K 0
−90
1K
−180
100
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
51
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Specified by Recovered Audio Characteristics
Part Number Nominal Center
Frequency (fn)
(kHz)
Recovered
Audio 3dB BW
(kHz)
Recovered
Audio Output
(mV)
Distortion
(at fn)
(%)
Distortion
(%) IC IC Maker Type
CDBKB450KCAY79-R0
450 fn±3.0 min. 145 ±40 - - TB32302FG TOSHIBA SMD
CDBKB455KCAY07-R0
455 fn±4.0 min. 350 ±60 3.0 max. - MC3357 MOTOROLA SMD
CDBKB455KCAY09-R0
455 fn±4.0 min. 120 ±40 1.5 max. - NE604N PHILIPS SMD
CDBKB455KCAY13-R0
455 fn±4.0 min. 330 ±50 4.0 max. - CXA1003BM SONY SMD
CDBKB455KCAY16-R0
455 fn±4.0 min. 175 ±40 2.0 max. - MC3372 MOTOROLA SMD
CDBKB455KCAY24-R0
455 fn±4.0 min. 100 ±40 2.0 max. - TA31136 TOSHIBA SMD
CDBKB455KCAY27-R0
455 fn±4.0 min. 90 ±30 2.0 max. - TK10487 TOKO SMD
CDBKB455KCAY28-R0
455 fn±4.0 min. 40 ±20 3.0 max. - TA31142F TOSHIBA SMD
CDBKB455KCAY29-R0
455 fn±4.0 min. 100 ±30 2.5 max. - NE605 PHILIPS SMD
CDBKB455KCAY35-R0
455 fn±4.0 min. 100 ±40 2.5 max. - TK10930 TOKO SMD
CDBKB455KCAY40-R0
455 fn±4.0 min. 40 ±20 3.5 max. - TA31145 TOSHIBA SMD
CDBKB455KCAY49-R0
455 fn±4.0 min. 45 ±10 3.0 max. - MC3361 MOTOROLA SMD
CDBKB455KCAY50-R0
455 fn±4.0 min. 64 ±6.4 4.0 max. - CXA3117N SONY SMD
CDBKB455KCAY66-R0
455 fn±4.2 min. 40 ±10 4.0 max. - NJM2590 JRC SMD
CDBKB455KCLX36-R0
455 fn±13.0 min. 90 ±30 2.5 max. 5.0 max.
[within fn ±6kHz] NE(SA)606
/NE(SA)616 PHILIPS SMD
CDBKB455KCLX39-R0
455 fn±11.0 min. 130 ±20 2.5 max. 7.0 max.
[within fn ±8kHz] NE607
/NE617 PHILIPS SMD
CDBKB455KCLY13-R0
455 fn±13.0 min. 120 ±30 1.5 max. 5.0 max.
[within fn ±8kHz] CXA1003BM SONY SMD
CDBLA455KCAY07-B0
455 fn±4.0 min. 340 ±60 2.5 max. - MC3357 MOTOROLA Lead
CDBLA455KCAY09-B0
455 fn±5.0 min. 100 min. 1.5 max. - NE604N PHILIPS Lead
CDBLA455KCAY13A-B0
455 fn±4.0 min. 350 ±50 3.0 max. - CXA1003BM SONY Lead
CDBLA455KCAY16-B0
455 fn±4.0 min. 185 ±40 2.0 max. - MC3372 MOTOROLA Lead
CDBLA455KCAY24-B0
455 fn±4.0 min. 100 ±40 2.0 max. - TA31136 TOSHIBA Lead
CDBLA455KCAY28-B0
455 fn±4.0 min. 40 ±20 3.0 max. - TA31142 TOSHIBA Lead
CDBLA455KCAY34-B0
455 fn±4.0 min. 65 ±20 2.5 max. - MC13136 MOTOROLA Lead
CDBLA455KCLY09-B0
455 fn±15.0 min. 70 ±20 1.5 max. 3.5 max.
[within fn ±8kHz] NE604N PHILIPS Lead
CDBLA455KCLY13-B0
455 fn±15.0 min. 110 ±30 1.5 max. 5.0 max.
[within fn ±8kHz] CXA1003BM SONY Lead
CDBLB455KCAY07-B0
455 fn±4.0 min. 340 ±60 3.0 max. - MC3357 MOTOROLA Lead
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
52
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number Nominal Center
Frequency (fn)
(kHz)
Recovered
Audio 3dB BW
(kHz)
Recovered
Audio Output
(mV)
Distortion
(at fn)
(%)
Distortion
(%) IC IC Maker Type
Continued from the preceding page.
CDBLB455KCAY13A-B0
455 fn±4.0 min. 350 ±50 3.0 max. - CXA1003BM SONY Lead
CDBLB455KCAY24-B0
455 fn±4.0 min. 100 ±40 2.0 max. - TA31136 TOSHIBA Lead
CDBLB455KCAY28-B0
455 fn±4.0 min. 40 ±20 3.0 max. - TA31142FN TOSHIBA Lead
CDBLB455KCAY34-B0
455 fn±4.0 min. 65 ±20 2.5 max. - MC13136 MOTOROLA Lead
CDBLB455KCAY40-B0
455 fn±4.0 min. 40 ±20 3.0 max. - TA31145 TOSHIBA Lead
CDBLB455KCAY42-B0
455 fn±4.0 min. 40 ±15 3.0 max. - TK14590
/TK14591 TOKO Lead
CDBLB455KCAY49-B0
455 fn±4.0 min. 45 ±10 3.0 max. - MC3361 MOTOROLA Lead
CDBLB455KCAY50-B0
455 fn±4.0 min. 64 ±6.4 4.0 max. - CXA3117N SONY Lead
CDBLB455KCLY09-B0
455 fn±15.0 min. 70 ±20 1.5 max. 3.5 max.
[within fn ±8kHz] NE604N PHILIPS Lead
CDBLB455KCLY13-B0
455 fn±15.0 min. 110 ±30 1.5 max. 5.0 max.
[within fn ±8kHz] CXA1003BM SONY Lead
CDBLB455KCAX16-B0
455 fn±4.0 min. 185 ±40 2.0 max. - MC3372 MOTOROLA Lead
CDBLB455KCAX18-B0
455 fn±3.0 min. 180 ±40 2.0 max. - MC3371 MOTOROLA Lead
CDBLB455KCAX36-B0
455 fn±3.5 min. 100 ±25 3.5 max. - NE606
/NE616 PHILIPS Lead
For safety purposes, avoid applying a direct current between the terminals.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
■ Test Circuit
MC3357
AF output
Vcc
0.1µ
0.01µ
C
RX
0.022µ
FM S. S. G.
(Rg = 50Ω)
16 915 14 13 12 11 10
1 82 3 4 5 6 7
8.2k
10k
MC3357
50
0.1µ
+
10µ
47k
CDBLA455KCAY07-B0
CDBLB455KCAY07-B0
CDBKB455KCAY07-R0
Part Number (X) C R
150pF
150pF
1.5kΩ
1.3kΩ
Unit C
R : F
: Ω
NE604N
16
AF output
Vcc
0.1µ
47µ
C
R
X
100p
0.1µ
100p
IF input
915 14 13 12 11 10
1 82 3 4 5 6 7
0.01µ
0.1µ
+
1000p L
0.01µ
NE604
CDBLA455KCAY09-B0
CDBKB455KCAY09-R0
Part Number (X) C R
CDBLA455KCLY09-B0
CDBLB455KCLY09-B0 120pF 560Ω
L
220µH
120pF 1.8kΩ −
Unit C : F
R : Ω
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
53
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Test Circuit
CXA1003BM
24
AF output
Vcc
0.01µ
C
RX
0.01µ
100µ
CXA1003BM
2700p
51k
0.01µ
0.01µ
0.01µ0.01µ0.01µ
L
100µ
0.01µ
1314151617181920212223
1 12111098765432
0.01µ
CDBLA455KCAY13A-B0
CDBLB455KCAY13A-B0
CDBKB455KCAY13-R0
Part Number (X) C R
82pF
82pF
1.2kΩ
1.0kΩ
CDBLA455KCLY13-B0
CDBLB455KCLY13-B0
CDBKB455KCLY13-R0 82pF 560Ω
L
220µH
−
−
IF input
Unit C : F
R : Ω
MC3372
AF output
Unit C : F
R : Ω
Vcc
16 15 14 13 12 11 10 9
1 2 3 4 5 6 7 8
0.01µ51 51k 0.1µ510k 8.2k
0.01µ
R
51k
1.8k
0.1µC
0.01µ
0.1µ
(Rg = 50Ω)
FM S. S. G
220p
68p
MC3372
X
CDBLA455KCAX16-B0
CDBLB455KCAX16-B0
CDBKB455KCAY16-R0
Part Number (X) C R
100pF
27pF
100pF
1.3kΩ
4.3kΩ
1.0kΩ
MC3371
AF output
Unit C
R : F
: Ω
RF input
16 915 14 13 12 11 10
1 82 3 4 5 6 7
0.01µ51 51k 0.1µ510k 8.2k
0.01µ
0.1µ
0.1µ
0.01µ
IF input
68p 220p RX
Test condition
Vcc = +4.0V
R = 6.2kΩ
X : CDBLB455KCAX18-B0
MC3371
Vcc
TA31136
AF output
Vcc
(+2.0V)
10µ+X R 1µ
0.01µ
C
0.1µ
0.01µ
0.1µ
10µ+
+
TA31136F
16 915 14 13 12 11 10
1 82 3 4 5 6 7
IF input CDBLA455KCAY24-B0
CDBLB455KCAY24-B0
CDBKB455KCAY24-R0
Part Number (X) C R
91pF
91pF
1.5kΩ
1.2kΩ
Unit C : F
R : Ω
TK10487
20 19 18 17 16 15 14 13 12
1
R
C
2k
Vcc
TK10487
0.01µ
10µ
+
0.1µ
0.1µ
0.01µ
0.01µ
8.2k
2 3 4 5 6 7 8 9
11
10
X
CDBKB455KCAY27-R0
Part Number (X) C R
33pF 1.0kΩ
Unit C : F
R : Ω
TA31142
20
AF
output
Vcc
111213141516171819
1 1098765432
430 +2.2µVcc
560p 68k 68k 3300p
68k
0.01µ
R
10µ
IF input
0.01µ
0.1µ
10µ
+
+
+
10µ0.1µ
2SC1048
0.01µ
TA31142F
X
C
Vcc
CDBLA455KCAY28-B0
CDBLB455KCAY28-B0
CDBKB455KCAY28-R0
Part Number (X) C R
22pF
22pF
3.3kΩ
2.7kΩ
Unit C : F
R : Ω
NE605
20
AF output
Vcc
+
0.1µ
0.01µ
C
0.1µ
R
X
0.1µ
150p
5n
0.1µ
100k
100k
22k
0.1µ22µ
NE605
111213141516171819
1 1098765432
IF input
100k
CDBKB455KCAY29-R0
Part Number (X) C R
56pF 2.2kΩUnit C : F
R : Ω
MC13136
24
1
23
2
22
3
21
4
20
5
19
6
18
7
17
8
16
9
15
10
14
11
13
12
R
X
C
Vcc
MC13136
0.01µ
0.01µ
0.15µ
1k
0.1µ
IF input
AF input
0.1µ0.1µ
0.1µ
+
CDBLA455KCAY34-B0
CDBLB455KCAY34-B0
Part Number (X) C R
100pF 1.2kΩUnit C
R : F
: Ω
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
54
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Test Circuit
TK10930
24
1
23
2
22
3
21
4
20
5
19
6
18
7
17
8
16
9
15
10
14
11
13
12
R2
R1 CX
Vcc
AF
output
IF input
TK10930
0.01µ
0.1µ
0.1µ
10µ
+
0.1µ
0.1µ
8.2k
CDBKB455KCAY35-R0
Part Number (X) R1 R2
2.0kΩ1.0kΩ
C
33pF
Unit C : F
R : Ω
NE(SA)606/616
20
1
19
2
18
3
17
4
16
5
15
6
14
7
13
8
12
9
11
10
R
X
L
IF input
AF output
C
20k
2k
8.2k
Vcc
NE606 or NE616
0.1µ
0.1µ0.1µ
0.01µ
0.1µ0.1µ
2.2µ
+
2.2µ
+
CDBLB455KCAX36-B0
CDBKB455KCLX36-R0
Part Number (X) C R
22pF
27pF 4.7kΩ
2.2kΩ
L
−
1mH Unit C : F
R : Ω
NE(SA)607/617
20
AF output
Vcc
0.1µ
0.01µ
0.01µ
C
R
X
L
0.1µ
0.01µ
51
IF input
1119 18 17 16 15 14 13 12
1 1023456789
22k
1.5k
NE607/617 (PHILIPS)
8.2k
+10µ
0.1µ0.1µ
CDBKB455KCLX39-R0
Part Number (X) C R
22pF 2.7kΩL
1mH
Unit C : F
R : Ω
L : H
TA31145
AF output
0.1µ
R
X
0.1µ
1000p
100k
10µ
IF input
3300p
Vcc
0.1µ
20
++
10µ
5600p
100k
+
2.2µ430
+
0.01
µ68k
68k
68k
560p
TA31145 (TOSHIBA)
1119 18 17 16 15 14 13 12
1 102 3 4 5 6 7 8 9
CDBLB455KCAY40-B0
CDBKB455KCAY40-R0
Part Number (X) R
3.3kΩ
2.7kΩ
Unit C : F
R : Ω
TK14590/14591
AF
output
Vcc
(1.3V)
0.1µ
0.01µ
C
R
0.0033µ
100k
X
IF input
24 1314151617181920212223
1 12111098765432
100k
8.2k
0.01µ
560p
100k
0.1µ
0.1µ
0.01µ
1µ
TK14590V (TOKO)
0.01µ
0.15µ
100k
100k
CDBLB455KCAY42-B0 3.3kΩ
Part Number (X) C R
22pF
Unit C : F
R : Ω
MC3361
47µ0.01µ0.1µ
Vcc
16 15 14 13 12 11 10 9
1 2 3 4 5 6 7
1µ
22
MC3361
100p 1000p
0.1µ
0.1µ
150k 100k
AF output
1k
RX
IF input
0.022µ
0.1µ0.1µ
8
Part Number (X)
CDBLB455KCAY49-B0
CDBKB455KCAY49-R0
R
1.8kΩ
1.5kΩ
Unit C
R : F
: Ω
CXA3117
24 22 20 19 16 15 14 13172123
1 3 5 6 9 10 11 128742
1200p
1µ
33µ0.01µ
1200p
1200p
R
X
AF out
Vcc
CXA3117(SONY)
18
Part Number (X)
CDBLB455KCAY50-B0
CDBKB455KCAY50-R0
R
8.2kΩ
6.2kΩ
Unit C
R : F
: Ω
NJM2590
Part Number (X)
CDBKB455KCAY66-R0
R
3.0kΩ
Unit C
R : F
: Ω
R X
10µ
S.G.
Vcc
0.1µ
51
0.1µ
AF output
10µ
10k
100k 100k
0.01µ
+
+
1 2 3 456 7
11
12
1314 8
910
NJM2590(JRC)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
55
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Recovered Audio Curve
CDBKB455KCAY07-R0
500
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
5 0.5
1 0.1
CDBLA/CDBLB455KCAY07-B0
500
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
5 0.5
1 0.1
CDBKB455KCAY09-R0
500
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
5 0.5
1 0.1
CDBLA455KCAY09-B0
500
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
5 0.5
1 0.1
CDBLA/CDBLB455KCLY09-B0
500
AF Output Voltage (mV)
T.H.D. (%)
395 435 475 515
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
5 0.5
1 0.1
CDBKB455KCAY13-R0
500
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
5 0.5
1 0.1
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
56
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Recovered Audio Curve
CDBKB455KCLY13-R0
AF Output Voltage (mV)
425 445 465 485
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBLA/CDBLB455KCAY13A-B0
500
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
5 0.5
1 0.1
CDBLA/CDBLB455KCLY13-B0
500
AF Output Voltage (mV)
T.H.D. (%)
395 435 475 515
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
5 0.5
1 0.1
CDBKB455KCAY16-R0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBLA455KCAY16-B0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBLB455KCAX16-B0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
57
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Recovered Audio Curve
CDBLB455KCAX18-B0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBKB455KCAY24-R0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBLA/CDBLB455KCAY24-B0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBKB455KCAY27-R0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBKB455KCAY28-R0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBLA/CDBLB455KCAY28-B0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
58
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Recovered Audio Curve
CDBKB455KCAY29-R0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBLA/CDBLB455KCAY34-B0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBKB455KCAY35-R0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBKB455KCLX36-R0
AF Output Voltage ( mV )
T.H.D. (%)
Frequency ( kHz )
1
10
100
500
425 445 465 486
0.1
0.5
5
50
5
50
1
10
CDBLB455KCAX36-B0
AF Output Voltage (mV)
440 450 460 470
Frequency (kHz)
500
100
50
10
5
1
T.H.D. (%)
50.0
10.0
5.0
1.0
0.5
0.1
CDBKB455KCLX39-R0
Frequency (kHz)
425 445 465 485
500
100
50
10
5
1
50.0
10.0
5.0
1.0
0.5
0.1
AF Output Voltage (mV)
T. H. D. (%)
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
59
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Recovered Audio Curve
CDBKB455KCAY40-R0
500
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
5 0.5
1 0.1
CDBLB455KCAY40-B0
500
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
5 0.5
1 0.1
CDBLB455KCAY42-B0
500
AF Output Voltage (mV)
T.H.D. (%)
440 450 460 470
Frequency (kHz)
50.0
100 10.0
50 5.0
10 1.0
5 0.5
1 0.1
CDBKB455KCAY49-R0
Frequency (kHz)
AF Output Voltage (mV)
T. H. D. (%)
440 450 460 470
500
100
50
10
5
1
50.0
10.0
5.0
1.0
0.5
0.1
CDBLB455KCAY49-B0
Frequency (kHz)
AF Output Voltage (mV)
T. H. D. (%)
440 450 460 470
500
100
50
10
5
1
50.0
10.0
5.0
1.0
0.5
0.1
CDBKB455KCAY50-R0
Frequency (kHz)
AF Output Voltage (mV)
T. H. D. (%)
440 450 460 470
500
100
50
10
5
1
50.0
10.0
5.0
1.0
0.5
0.1
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
60
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Recovered Audio Curve
CDBLB455KCAY50-B0
Frequency (kHz)
AF Output Voltage (mV)
T. H. D. (%)
440 450 460 470
500
100
50
10
5
1
50.0
10.0
5.0
1.0
0.5
0.1
CDBKB455KCAY66-R0
Frequency (kHz)
AF Output Voltage (mV)
T. H. D. (%)
440 450 460 470
500
100
50
10
5
1
50.0
10.0
5.0
1.0
0.5
0.1
Specified by S Curve Characteristics
Part Number Nominal Center
Frequency (fn)
(kHz)
S Curve (1)
Output Volt. at fn
(mV)
S Curve (2)
at fn±4.8kHz
(mV) IC IC Maker Type
CDBKB455KCAY54-R0 455 165 ±20 170 ±20 TA31149 TOSHIBA SMD
■ Test Circuit
TA31149
24 22 16 15
1 3 5 9742
1000p
10µ
0.1µ
10µ
1000p
100k
0.1µ
R
X
AF output
1200p
1500p
Vcc (W1.4V)
TA31149(TOSHIBA)
12118 106
IF
input
17
2.2µ
430
23 21 20
Vcc
100k
Vcc
100k
Vcc
19 18 14 13
+
+
+
Part Number (X)
CDBKB455KCAY54-R0
R
2.7kΩ
Unit C : F
R : Ω
■ S Curve
CDBKB455KCAY54-R0
440 450 460 470
0.0
0.1
0.2
0.3
0.4
Frequency (kHz)
Volt (V)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
61
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Discriminators for Communications Equipment
MHz Type Ceramic Discriminators
CDSCB10M7 series forms a resonator on a piezoelectric
ceramic substrate. In combination with ICs, this type
obtains stable demodulation characteristics in a wide
bandwidth.
They have 1.0mm max. thickness and small mounting area
(4.5x2.0mm).
■ Features
1. Compact and high reliability and recommended for
automotive applications.
2. Can be combined with various ICs. The IC is
determined by the last number in the part number.
3. Stable demodulation characteristics can be
obtained without adjustment.
4. Stable temperature characteristics
5. Available lead (Pb) free solder reflow.
4.1 max.
1.0 max.
4.5±0.1
0.2±0.2
2.0±0.1
0.3±0.2
0.4(ref.) 0.4(ref.)
1.4 max.
0.4±0.05
1.5±0.1
0.8±0.10.8±0.1
1.5±0.1 (in mm)
CDSCB Series
Part Number Center
Frequency (fo)
(MHz)
Recovered
Audio 3dB BW
(kHz)
Recovered
Audio Output
(mV)
Distortion
(%) S Curve
(mV) IC
CDSCB10M7GA105A-R0 10.700 ±30kHz 220 min. 110 min. 1.5 max. - TEA5757HL
CDSCB10M7GA113-R0 10.700 ±30kHz 300 min. 110 min. 1.0 max. - TA2154FN
CDSCB10M7GA119-R0 10.700 ±30kHz 500 min. 75 min. 1.0 max. - TRF6901
CDSCB10M7GA121-R0 10.700 ±30kHz 390 min. 80 min. 1.0 max. - LV23100V
CDSCB10M7GA135-R0 10.700 ±30kHz 155 min. 75 min. - - TH71101
CDSCB10M7GA136-R0 10.700 ±30kHz 140 min. 120 min. - - TH7122
CDSCB10M7GF072-R0 10.700 (fn) fn±150 min. 130 min. 2.0 max. - TA31161
CDSCB10M7GF107S-R0 10.700 (fn) fn±80 min. 52 min. 3.0 max. - TA31272FN
CDSCB10M7GF109-R0 10.700 (fn) fn±100 min. 170 min. 3.0 max. - TK14588V
CDSCB10M7GF123-R0 10.700 (fn) - - - 900 min. TA31275FN
CDSCB10M7GF123S-R0 10.700 (fn) - - - 900 min. TA31275FN
CDSCB10M7GF126-R0 10.700 (fn) - - - 400 min. NJM2295AV
(fn) means nominal center frequency.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
For safety purposes, avoid applying a direct current between the terminals.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
62
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Test Circuit
CDSCB10M7GA105A-R0
48 41424344454647
13
12 20191817161514
4.7µ
X
150
S.S.G.
Vcc (3.0V)
0.1µ
0.47µ
TEA5757HL
(PHILIPS)
+
40
21
39
22
38
23
37
24
X : CDSCB10M7GA105A-R0
0.1µ
0.1µ10µ
100µ
10
100k
+
+
AFC (n)
AFC (p)
AF OUT
DC OUT
330p
0.22µ
11
10
9
8
7
6
5
4
3
2
1
25
26
27
28
29
30
31
32
33
34
35
36
0.1µ
Unit C
R: F
: Ω
CDSCB10M7GA113-R0
30 23242526272829
1 8765432
2.2µ
D.C. OUT
S.S.G.
Vcc (1.2V)
AF OUT
0.01µ
0.01µ
0.01µ
0.01µ
680p
TA2154FN (TOSHIBA)
+
22
9
21
10
20
11
19
12
18
13
17
14
16
15
X : CDSCB10M7GA113-R0
0.01µ
X
Unit C
R: F
: Ω
CDSCB10M7GA119-R0
0.01µ
0.01µ
0.01µ
0.01µ
0.01µ0.47µ
2.2µ0.1µ
0.1µ
0.22µ
4.7µ
120p
220k
68p
15p 82p
47p
1000p
100p
100p
10k
10k
1k
+
10
IF Input AF Output
Vcc (3.0V)
(TEXAS INSTRUMENTS)
TRF6901
PIC16F84
X
Unit C
R
L
: F
: Ω
: H
+
X : CDSCB10M7GA119-R0
1
2
3
4
5
6
7
8
9
10
11
12
36
35
34
33
32
31
30
29
28
27
26
25
13 14 15 16 17 18 19 20 21 22 23 24
48 47 46 45 44 43 42 41 40 39 38 37
18 17 16 15 14 13 12 11 10
1 2 3 4 5 6 7 8 9
CDSCB10M7GA121-R0
0.47µ
0.01µ
AF Output D.C. Output
LV23100V (SANYO)
PIC16F84 (Control IC)
10k
10k
10k
Vcc (3.2V)
1µ
0.047µ
0.047µ
2.2µ0.1µ
1k
0.047µ10k75
0.015µ0.01µ
100µ
10p
100p
10p
22µ
10µ
3.3k
+
1µ
+
+
+
+
+
+
S.G.
X
Unit C
R: F
: Ω
X : CDSCB10M7GA121-R0
36 35 34 33 32 31 30 2829 27 26 25 24 23 22 21 20 19
1 2 3 4 5 6 7 98 10 11 12 13 14 15 16 17 18
18
1
17
2
16
3
15
4
14
5
13
6
12
7
10
9
11
8
CDSCB10M7GA135-R0
Unit C
R: F
: Ω
X: CDSCB10M7GA135-R0
123456789
10
11
12
13
14
15
16
1718192021222324
25
26
27
28
29
30
31
32
220k
0.01µ
0.01µ
1000p
0.1µ
0.01µ1000p100p
330p
0.033µ
12p
0.01µ
0.01µ
0.01µ
1000p
C.D.
330p10µ
+
S.G.
Vcc (5.0V)
TH71101, TH71102,
TH71111 or TH71112
(MELEXIS)
FKS-OUTAF-OUT
330k
CDSCB10M7GA136-R0
12345678
123456789
18 17 16 15 14 13 12 11 10
9
10
11
12
13
14
15
16
1718192021222324
25
26
27
28
29
30
31
32
Unit C
R: F
: Ω
X: CDSCB10M7GA136-R0
0.1µ
2.2µ
1k
100k
3.3k
+0.1µ
100p
10k
PIC16F84 (Control IC)
TH7122
[Internal AFC Enabled]
(MELEXIS)
Vcc (5.0V)
0.01µ
0.01µ
0.1µ0.01µ330p
330p 100k
330p
S.G. C.D.
FKS-OUT
AF-OUT
330p
330p
0.01µ
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
63
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Test Circuit
CDSCB10M7GF072-R0
16
Vcc (3V)
9101112131415
1 8765432
IF IN
AF OUT
0.01µ
33µ0.01µ
R
10p
4.7µ
X
0.01µ
0.01µ
0.01µ
+
TA31161 (TOSHIBA)
X : CDSCB10M7GF072-R0
R : 820 Unit C
R
L
: F
: Ω
: H
CDSCB10M7GF107S-R0
Vcc (5.0V)
+
123456789101112
24 23 22 21 20 19 18 17 16 15 14 13
0.01µ
TA31272FN (TOSHIBA)
AF Output
C.D.
0.01µ
0.01µ
1000p
100µ
0.01µ
0.01µ
0.01µ
1.2k
C.D.: Ceramic Discriminator
Unit R
C
L
: Ω
: F
: H
S.S.G.
CDSCB10M7GF109-R0
0.01µ
0.01µ
Vcc (3V)
12k 51k
1000p
8p
+
S.S.G.
R
D.C. OUT AF OUT
X
0.01µ
0.01µ
0.01µ
0.01µ
4.7µ
51
0.01µ
1.2µ
TK14588V (TOKO)
Unit C
R
L
: F
: Ω
: H
X : CDSCB10M7GF109-R0
R : 820
910111213141516
87654321
CDSCB10M7GF123-R0
Vcc (5.0V)
123456789101112
24 23 22 21 20 19 18 17 16 15 14 13
0.1µ
0.01µ
TA31275FN (TOSHIBA)
1000p
3300p
0.01µ
AF OUT
DC-OUT
0.01µ
0.01µ
0.1µ
0.1µ
0.1µ1.8k
0.01µ
X : CDSCB10M7GF123-R0
Unit C
R: F
: Ω
S.S.G.
CDSCB10M7GF126-R0
Vcc (5.0V)
12345678910
20 19 18 17 16 15 14 13 12 11
NJM2295AV (JRC)
0.01µ
DC-OUT
100p
0.01µ
10µ
0.01µ
10µ
180
8p
C.D.
0.01µ
X : CDSCB10M7GF126-R0
Unit C
R: F
: Ω
S.G.
+
+
10µ
+
10µ
+
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
64
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Recovered Audio Curve
CDSCB10M7GA105A-R0
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBµ
= ±75kHz
= 1kHz
= 3.0V
1
10
100
1000
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
0.1
1
10
100
AF Output
Distortion
CDSCB10M7GA113-R0
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBµ
= ±75kHz
= 1kHz
= 1.2V
1
10
100
1000
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
0.1
1
10
100
AF Output
Distortion
CDSCB10M7GA119-R0
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBµ
= ±60kHz
= 1kHz
= 3.0V
1
10
100
1000
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
0.1
1
10
100
AF Output
Distortion
CDSCB10M7GA121-R0
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBµ
= ±75kHz
= 1kHz
= 3.2V
1
10
100
1000
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
0.1
1
10
100
AF Output
Distortion
CDSCB10M7GA135-R0
AF Output Voltage (mV)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBµ
= ±50kHz
= 1kHz
= 5.0V
1
10
100
1000
10.4 10.5 10.6 10.7 10.8 10.9 11.0
0.1
CDSCB10M7GA136-R0
AF Output Voltage (mV)
Frequency (MHz)
Input
fdev.
fmod.
Vcc
= 100dBµ
= ±50kHz
= 1kHz
= 5.0V
1
10
100
1000
10.4 10.5 10.6 10.7 10.8 10.9 11.0
0.1
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
65
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Recovered Audio Curve
CDSCB10M7GF072-R0
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
100 10
1000 100
10 1
1 0.1
10.3 10.5 10.7 10.9 11.110.4 10.6 10.8 11.0
Input =
fdev. =
fmod. =
Vcc =
100dBµ
±80kHz
1kHz
3.0V
CDSCB10M7GF109-R0
AF Output Voltage (mV)
T.H.D. (%)
Frequency (MHz)
1000
100
10
1
100
10
1
0.1
10.3 10.5 10.7 10.9 11.1
Input =
fdev. =
fmod. =
Vcc =
100dBµ
±64kHz
1kHz
3.0V
10.4 10.6 10.8 11.0
■ S Curve
CDSCB10M7GF123-R0
Volt (V)
Frequency (MHz)
0.5
0.0
1.0
1.5
2.0
2.5
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
CDSCB10M7GF126-R0
Volt (V)
Frequency (MHz)
1.0
2.0
3.0
4.0
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
Ceramic Discriminators Notice
66
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ CDBKB Series Notice (Soldering and Mounting)
1. Standard Reflow Soldering Conditions
(1) Reflow
CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA),
Water (Demineralized Water), Cleaning Water Solution
(Cleanthrough-750H, Pine Alpha 100S), Silicon
(Technocare FRW)
2. Wash
(1) Cleaning Solvent
Immersion Wash
2 minutes max. in above solvent at +60°C max.
Shower or Rinse Wash
2 minutes max. in above solvent at +60°C max.
(2) Cleaning Conditions
When components are immersed in solvent, be sure to
maintain the temperature of components below the
temperature of solvent.
Please do not use ultrasonic cleaning.
Total washing time should be within 4 minutes.
Please ensure the component is thoroughly evaluated
in your application circuit.
Please do not use chlorine, petroleum and alkaline
cleaning solvents.
If you plan to use any other type of solvents, please
consult with Murata or Murata representative prior to
using.
(3) Notice
Electrode is directly soldered with the tip of soldering iron
at +350±5°C for 3.0±0.5 seconds.
(2) Soldering Iron
Peak
(260°C max.)
Heating
(230°C)
Gradual
Cooling
Pre-heating
(150-180°C)
100
230
260
Temperature (°C)
60-120 sec. 40 sec.
max.
30 sec.
min. 120 sec.
min.
Filter is soldered twice within the following temperature
conditions.
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
Ceramic Discriminators Notice
67
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ CDSCB Series Notice (Soldering and Mounting)
1. Standard Reflow Soldering Conditions
(1) Reflow
The component cannot withstand washing.
2. Wash
Filter is soldered at +300±5°C for 3.0±0.5 seconds. The
soldering iron should not touch the filter while soldering.
Filter is soldered twice within the following temperature
conditions.
(2) Soldering Iron
Temperature (°C)
100
230
260
30 sec.
min. 40 sec.
max.
Peak
(260°C max.)
Pre-heating
(150-180°C)
Heating
(230°C)
Gradual
Cooling
120 sec.
min.
60-120 sec.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
Ceramic Discriminators Notice
68
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ CDBKB Series Notice (Handling)
■ CDBLA/CDBLB Series Notice (Handling)
■ CDSCB Series Notice (Handling)
1. The component mounted on the PCB may be damaged if
excessive mechanical stress is applied.
2. Layout the components on the PCB to minimize the
stress imposed on the warp or flexure of the board.
3. After installing components, if solder is excessively
applied to the circuit board, mechanical stress will cause
destruction resistance characteristics to lower. To prevent
this, be extremely careful in determining shape and
dimension before designing the circuit board diagram.
4. The component may be damaged during mounting
process if some part of mounter such as positioning
claws or nozzle are worn down. The regular maintenance
recommended for mounters should be done to prevent
troubles.
5. When correcting component's position with a soldering
iron, the tip of the soldering iron should not directly touch
the chip component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. The use of solder containing Ag should be
considered to prevent the electrode erosion.
6. Do not clean or wash the component as it is not
hermetically sealed.
7. In case of overcoating the part, coating conditions such
as material of resin, curing temperature, and so on
should be evaluated carefully.
8. Accurate test circuit values are required to measure
electrical characteristics.
It may be a cause of miscorrelation if there is any
deviation, especially stray capacitance, from the test
circuit in the specification.
9. For safety purposes, avoid applying a direct current
between the terminals.
[Component Direction]
[Component Layout Close to Board]
Put the
component
laterally to the
direction in
which stress
acts.
Susceptibility to
stress is in the order
of : A>C>B
B
AC
Slit
Perforation
1. The component will be damaged when an excessive
stress is applied.
2. In the case that the component is cleaned, confirm
no reliability degradation is created.
3. In case of covering filter with over coat,
conditions such as material of resin, cure
temperature, and so on should be evaluated
carefully.
4. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in re-flow soldering.
5. The product, packed in the moisture-proof bag (dry
pack), is sensitive to moisture.
The following treatment is required before
applying re-flow soldering, to avoid package
cracks or reliability degradation caused by
thermal stress. When unpacked, store the component
in an atmosphere of below 25 degrees C. and below
65%R.H., and solder within 48 hours.
1. Do not use this product with bend. The component
may be damaged if excess mechanical stress is
applied to it mounted on the printed circuit board.
2. The component will be damaged when an excessive
stress is applied.
3. All kinds of re-flow soldering must not be applied
on the component.
4. Do not clean or wash the component as it is not
hermetically sealed.
5. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in flow soldering.
6. In case of covering discriminator with over coat,
conditions such as material of resin, cure
temperature, and so on should be evaluated
carefully.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
Ceramic Discriminators Standard Land Pattern Dimensions/Packaging
69
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Standard Land Pattern Dimensions
CDBKB Series
(in mm)
1.2 1.2
2.04.9
2.6
CDSCB Series
2.6
1.0 2.0 1.0
3.0
(in mm)
■ Minimum Quantity
Part Number Taping ø180mm Bulk
500
2000
500
500
Magazine
50
80
CDBKB Series
CDBLA Series
CDBLB Series
CDSCB Series
(pcs.)
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
■ CDBKB Series
User direction of feed
Cover film
3° max.
+0.1
-0.0
+1.0
-0
+0
-3.0
Dimensions of Carrier Tape Dimensions of Reel
(in mm)
Leader
Cover film
Empty EmptyComponents
Trailer
160 to 190
160 to 200
400 to 560
(ø60 )
(ø180 )
17.0±0.3
4.0±0.1
7.5±0.1 1.75±0.1
16.0±0.15
3.3±0.1
7.2±0.1
8.0±0.1
6.3±0.1
2.0±0.1
19.4±1.0
ø13.0±0.5
ø1.5
2.0±0.2
• Part number marked side is always facing upside.
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
Ceramic Discriminators Standard Land Pattern Dimensions/Packaging
70
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ CDSCB Series
4.0±0.1
Cover film
4.0±0.1 2.0±0.05
12.0±0.2
(9.0)
ø1.5+0.1
-0
ø1.5+0.1
-0
5.5±0.05
1.75±0.1
4.7±0.1
User direction of feed
• Part number marked side is always facing upside.
0.3±0.05
(1.7 max.)
1.1±0.1
(3˚)
2.2±0.1
Peeling strength
0.1 to 0.7N 10˚
Dimension of reel
( ) : Reference
(in mm)
ø13.0±0.2
2.0±0.5
17.0±1.0
180+0.1
-1.5
60+0.1
-0
240 to 280
400 to 560
160 to 190
EmptyComponents
Cover film
Empty
Trailer Leader
13.0+1.0
-0
Dimensions of Carrier Tape
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P05E.pdf
11.1.11
