HRF-AT4510-TR - Honeywell - Datasheet.Live

HRF-AT4510

15.5 dB, DC - 4GHz, 5 Bit Parallel Digital Attenuator

The Honeywell HRF-AT4510 is a 5-bit digital attenuator that is ideal for use

in broadband communication system applications that require accuracy,

speed and low power consumption. The HRF-AT4510 is manufactured with

Honeywell's patented Silicon On Insulator (SOI) CMOS manufacturing

technology, which provides the performance of GaAs with the economy and

integration capabilities of conventional CMOS. These attenuators are DC

coupled to improve lower operating frequency, frequency response and

reduce the number of DC bias points required.

FEATURES

• Very Low DC Power Consumption

• Attenuation In Steps From 0.5 dB To 15.5 dB

• Single Positive Power Supply Voltage

• Parallel Data Interface

• 50 Ohm Impedance

• DC-coupled, bi-directional RF path

• Space Saving VQFN Surface Mount Packaging

RF ELECTRICAL SPECIFICATIO NS @ + 25oC

Results @ VDD = 5.0 +/- 10%, VSS = 0 unless otherwise stated, Z0 = 50 Ohm s

Contact Honeywell for relative perform ance at other supply configurations

HR

F

-

AT

4

510 in VQFN Packa

g

e

Parameter Test Condition Frequency Minimum Typical Maximum Units

Insertion Loss

0.5 GHz

2.0 GHz

3.0 GHz

4.0 GHz

1.6

2.0

2.4

4.4

2.2

2.4

2.9

5.0

dB

1dB Compression VSS = 0V, Input Power

VSS = -3V, Input Power 2.0 GHz

2.0 GHz 20

26 dBm

dBm

Input IP3 VSS = 0V

Two-tone inputs, up to +5 dBm @ 0

dB attenuation

2.0 GHz

36.0

dBm

Input IP3 Vss = -3V

Two-tone inputs, up to +5 dBm @

0 dB attenuation

2.0 GHz

>36.0

dBm

Return Loss Any Bit or Combination of Bits -11 -15 dB

Attenuation Accuracy

All attenuation states

1.0 GHz

2.0 GHz

3.0 GHz

4.0 GHz

+/-(0.15 + 3% of programmed IL)

+/-(0.20 + 3% of programmed IL)

+/-(0.30 + 3% of programmed IL)

+/-(0.45 + 3% of programmed IL)

dB

Trise, Tfall

Ton, Toff (Tpd) 10% To 90%

50% Cntl To 90% / 10%RF 10

15 nS

nS

HRF-AT4510

2 www.honeywell.com/microwave

FUNCTIONAL SCHEMATIC

DC ELECTRICAL SPECIFICATIO NS @ + 25°C

Parameter Minimum Typical Maximum Units

VDD 3.3 5.0 5.5 V

VSS -5.0 V

IDD <5.0 50 uA

CMOS Logic level (0) 0 0.8 V

CMOS Logic level (1) VDD – 0.8 VDD V

Input Leakage Current 10 uA

Note 1, the performance curves are for VDD = +5.0 +/- 10%

ABSOLUTE MAXIMUM RATINGS1

Parameter Absolute Maximum Units

Input Power + 35 dBm

VDD +6.0 V

VSS -5.5 V

ESD Voltage 2 400 V

Operating Temperature -40 To +85 Degrees C

Storage Temperature -65 To +125 Degrees C

Moisture Sensitivity Level Level 1

Digital Inputs VDD+0.6 max to -0.6 min V

Note 1 - Operation of this device beyond any of these parameters may cause permanent damage.

Note 2 - Although the HRF-AT4510 contains ESD protection circuitry on all digital inputs, precautions should be taken to

ensure that the Absolute Maximum Ratings are not exceeded.

Latch-Up: Unlike conventional CMOS digital attenuators, Honeywell's HRF-AT4510 is immune to latch-up.

RF In RF Out

S4 S3 S0S1S2

8dB 4dB 2dB 1dB .5dB

ESD, Buffer, Level Shift

HRF-AT4510

www.honeywell.com/microwave 3

PIN CONFIGURATIONS

Pin Function Pin Function

1 VDD 13 GROUND

2 GROUND 14 GROUND

3 GROUND 15 RF OUTPUT

4 RF INPUT 16 GROUND

5 GROUND 17 VSS

6 GROUND 18 GROUND

7 GROUND 19 S0

8 GROUND 20 S1

9 GROUND 21 S2

10 GROUND 22 S3

11 GROUND 23 S4

12 GROUND 24 OPEN

Note: Bottom ground plate must be grou nded for proper RF performance.

TRUTH TABLE

S4 S3 S2 S1 S0 Output

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

Reference Input

0.5 dB

1 dB

2 dB

4 dB

8 dB

15.5 dB

Operation: Data on parallel input “S” pins are independently buffered and presented to the RF attenuator circuits.

"0" = CMOS Low, "1" = CMOS High.

HRF-AT4510

4 www.honeywell.com/microwave

PERFORMANCE CURVES

Insertion Loss

Typical AT4510 Reference Insertion Loss

-4.5

-4.0

-3.5

-3.0

-2.5

-2.0

-1.5

-1.0

-0.5

0.0

0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75

Frequency (GHz)

Insertion Loss (dB)

- 40 C

+25C

+ 85 C

3.3 V

Return Loss

Typical AT4510 Input Return Loss

-40.0

-35.0

-30.0

-25.0

-20.0

-15.0

-10.0

-5.0

0.0

0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00

Frequency (GHz)

R e tu rn L o s s (d B)

Attn 1dB Attn 2dB

Attn 3dB Attn 9dB

HRF-AT4510

www.honeywell.com/microwave 5

Step Accuracy

Typical AT4510 Step Accuracy

-0.5

-0.4

-0.3

-0.2

-0.1

0.0

0.1

0.2

0.3

0.4

0.5

0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5

Frequency (GHz)

Step Accuracy (dB)

0.5 dB 1 dB

2 dB 4 dB

8 dB 15.5 dB

8 dB

4 dB 1 dB

2dB

Relative Accuracy

Typical AT4510 Relative Accuracy

-0.5

-0.4

-0.3

-0.2

-0.1

0.0

0.1

0.2

0.3

0.4

0.5

0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5

Frequency (GHz)

Relative Accuracy (dB)

0.5 dB 1 dB

2 dB 4 dB

8 dB 15.5 dB 8 dB

15.5 dB

4 dB

0.5 dB

2 dB

1 dB

HRF-AT4510

6 www.honeywell.com/microwave

PACKAGE OUTLINE DRAWING

LEAD FINISH

The package leads are Ti n Lead (SnPb).

CIRCUIT APPLICATION INFORMATION

These attenuators require a DC referen ce to ground. They may not operate properly when AC co upled on both the RF

input and output without a DC ground reference provided as part of the circuit. See Application Note AN311 at

www.honeywell.com/microwave.

NOTES

1. Pin 1 ID can be a combination of a dot and/or chamfer.

2. Dimensions are in millimeters.

HRF-AT4510

www.honeywell.com/microwave 7

EVALUATION CIRCUIT BOARD

Honeywell's evaluation board provides an easy to use method of evaluating the RF performance of our attenuator. Simply

connect power, DC and RF signals to b e measuring attenuator performance in less than 10 minutes.

EVALUATION CIRCUIT BOARD LAYOUT DESIGN DETAILS

Item Description

PCB Impedance Matched Multi-Layer FR4

Attenuator HRF-AT4510 Digital Attenuator

Chip Capacitor Panasonic Model ECU-E1C103KBQ Capacitor, .01uf 0402 10% 16V

RF Connector Johnson Connectors Model 142-0701-801 SMA RF Coaxial Connector

DC Pin Mil-Max Model 800-10-064-10-001 Header Pins

ORDERING INFORMATION

Ordering Number Delivery Method Units Per Shipment

HRF-AT4510-TR

HRF-AT4510-T

HRF-AT4510-E

Tape & Reel

Tape

Evaluation Board

3000 Units Per Reel

<3000

One Board Per Box

FIND OUT MORE

For more information on Honeywell’s Microwave Products visit us online at www.honeywell.com/microwave or contact

us at 800-323-8295 (763-954-2474 internationally).

Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume any liability arising out of the

application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others.

Honeywell

12001 High wa y 55

Plymouth, MN 55441

Tel: 800-323-8295

www.honeywell.com/microwave

Form #4510W

January 2007

y

well International Inc.

HRF-AT4510 Evaluation Board

HRF-AT4510

Evaluation Board

Top View

HRF-AT4510

Honeywell

VDD VSS

Gnd

RF In RF Out

S0

S1

S2S3S4

Open Gnd