July 2007 www.cooperhandtools.com/weller New in 2007 Weller Volume Extraction System WFE2ES Weller Info No. 2 New for 2007: Weller Volume Fume Extraction System WFE2ES Our testing conclusively proves that soldering with lead-free alloys creates a level of breathable air-born pollutants which exceeds the safety threshold set by OSHA ( see diagram). This is a viable solution for use in applications where volume extraction is the most suitable option e.g. solder baths, hot air soldering, micro soldering and adhesive applications. Key features of the WFE 2ES: The WFE 2ES guarantees a filtration efficiency of 99.5%. The compact filter system housed inside consists of an F5-class fine dust filter and a Puratex compact H12 Filter (with active carbon section) ensuring an efficient and reliable extraction function. The powerful brushless and maintenance free turbine (1800 Pascal) extracts at a volume capacity of 220m/h resulting in fast and effective removal of pollutants from the air. The increased levels of air-born pollutants produced at the work place by lead free soldering are safely and easily removed by the WFE 2ES. Low noise emission: less than 55 dBA. Our wide range of accessories provides users with a high degree of operational flexibility. There is no need for specialized on-site installation. And the investment makes the WFE 2ES a highly efficient and costeffective fume extraction system for up to two work places. The WFE 2ES improves the soldering process by capturing the particles and pollutants produced and providing the operator with a comfortable, clean and safe working environment. Available August 2007. Page 1 of 7 WELLER NEWS No.1 / Seite 2 von 2 July 2007 Weller Info No. 2 Technical Data WFE 2ES Voltage 115 / 120 VAC - 50 / 60 Hz Dimensions in mm 320 x 320 x 395 mm (L x W x H) 12.6 x 12.6 x 15.6 in. Electrical Power 115 VA Noise level 52 db (A) at 1 m distance Max. pressure 1800 Pa (0.26 psi) Max. airflow 220 m /h Max. capacity 2 work places Filter Fine dust filter F5 (no. 0058735884) 3 HEPA filter H12 (no. 0058762701) (99.5% extraction of particles > 0.66 m) plus carbon filter (active carbonate foam) WFE 2ES KIT 115V (Order No. WFE2ESKIT) consists of: WFE2ES WFE 2ES 115V fume extraction unit 005 36 372 99 WFAF 50 extraction arm, 1 m length 005 87 353 27 Extraction hose, 50 mm dia., 3 m length 005 36 379 99 WFTB 50 bench mounting bracket with damper for extraction arm 005 36 371 99 WFFMP 50 adapter 005 87 358 79 hose clamp 50 - 70 mm (2 pcs.) Page 2 of 7 Weller Info No. 2 July 2007 WFE2ES (Order No. WFE2ES) consists of: Photo: Cat. No. WFE2ES 0053650681 Order No. WFE2ES 0053650681 Description 115 / 120 VAC fume extraction base unit, includes 3 m (10 foot) extraction hose Accessory kit containing accessories necessary for one operator Function 99.5% filtration efficiency of soldering, flux, adhesive, and solvent fumes Contains all of the accessories needed for the setup of one operator Accessory Kit Contents (0053650681): Photo: Cat. No. Order No. Description 0058735925 0058735925 50 mm (2 in.) extraction hose, 3 meters (10 feet) in length WFFMP50 0053637199 System seal 0053637999 Bench mounting bracket or WFFMP50 system seal WFTB50 Page 3 of 7 Function Connects to one of the two exhaust ports in the WFE2ES base unit. For connecting the 50 mm (2 in.) extraction hose (TBD) to the WFAF50 flexible extraction arm (0053637299). The damper mounts directly into a 58 mm (2.25 in.) hole in the bench top. When the WFAF50 extraction arm is removed from the system seal, a spring-hinged door seals off the system. Use this bracket to mount the WFFMP50 system seal to the side of the bench if your benchtop does not have hole. Weller Info No. 2 Photo: July 2007 Cat. No. Order No. Description WFAF50 0053637299 Extraction Arm, 50 mm (2 in.), 100 mm (4 in.) funnel, 100 cm (39.4 in.) length, ESD safe 0058735879 0058735879 50 - 70 mm ( 2 - 2.75 in.) hose clamps, qty. 2 Function Connects to the WFE2ES fume extraction base unit through the WFFMP50 system seal. Position the nozzle over your soldering work area for efficient fume removal For securing the 50 mm (2 in.) extraction hose to the WFE2ES base unit on one end and the WFFMP50 system seal on the other end Additional accessories available for the WFE2ES: Extraction Arms Photo: Cat. No. WFAF50 WFAS50 WFAN50 Order No. Description 0053637299 Extraction Arm, 50 mm (2 in.), 100 mm (4 in.) funnel, 100 cm (39.4 in.) length, ESD safe 0053637399 Extraction Arm, 50 mm (2 in.) tube, 210 (8.3 in.) x 20 mm (0.75 in.) flat nozzle, 100 cm (39.4 in.) length, ESD safe 0053637499 Extraction Arm, 50 mm tube (2 in.), 50 mm (2 in.) round nozzle, 100 cm (4 in.) length, ESD safe Page 4 of 7 Function Connects to the WFE2ES fume extraction base unit through the WFFMP50 system seal. Position the nozzle over your soldering work area for efficient fume removal. Connects to the WFE2ES fume extraction base unit through the WFFMP50 system seal. Position the nozzle over your soldering work area for efficient fume removal Connects to the WFE2ES fume extraction base unit through the WFFMP50 system seal. Position the nozzle over your soldering area. Weller Info No. 2 Photo: July 2007 Cat. No. 0058735849 Order No. 0058735849 Description Extraction Arm, 50 mm (2 in.) tube, articulated joint and airflow control valve, bench clamp. ESD safe. Function Connects to the WFE2ES fume extraction base unit through the WFFMP50 system seal. Position the nozzle over your soldering work area for efficient fume removal. Exhaust Hoods and Tables Photo: Cat. No. Order No. Description 0053637899 Exhaust Hood, 240 x 100 mm (9.5 x 4 in.), flexible 1 meter (39.4 in.) hose, ESD safe WFDD50 0053638099 Extraction Plate, 300 x 210 mm (12 x 8.3 in.), flexible 1 meter (39.4 in.) hose, ESD safe 0058735845 0058735845 Metal Exhaust Hood, 200 x 100 mm (8 x 4 in.) WFCC50 Page 5 of 7 Function Connects to the WFE2ES fume extraction base unit through the WFFMP50 system seal. Position the hood behind the soldering work area for efficient fume removal. Connects to the WFE2ES fume extraction base unit through the WFFMP50 system seal. For adhesive and solvent fume removal. Just position your work over the fume extraction grid. Connects to the WFE2ES fume extraction base unit through the WFFMP50 system seal. Recommended for use with hot air systems such as WHA3000P. Weller Info No. 2 July 2007 Replacement Filters The filters in the WFE2ES must be changed regularly to maintain peak performance. Failure to change the filters regularly may cause severe damage to the base unit and void the warranty. Photo: Cat. No. 0058735884 (comes with WFE2ES) Photo: Cat. No. 0058735885 (upgrade from standard F5 filter) 0058762701 (comes with WFE2ES) 0058735883 (upgrade from standard H12 filter) Order No. 0058735884 Order No. 0058735885 0058762701 0058735883 Description F5 Fine Dust Filter, 10 Per Pack Description The F5 grade prefilter will remove 40% - 60% of particles up to 100m. Function F7 Fine Dust Filter, 10 Per Pack The F5 grade pre-filter will remove 80% - 90% of particles up to 10m. Filter cartridge consisting of an H12 HEPA filter plus a wide band gas filter The H12 grade HEPA filter will remove 99.5% of particles up to 0.66 m. The activated carbon filter element is for odor control. The filter consists of 50% active carbon and 50% Puratex. Puratex is a chemical filtration agent that that removes trace amounts of molecular contaminants, such as acids and alkalis. Filter cartridge consisting of an H13 HEPA filter plus a wide band gas filter The H13 grade HEPA filter will remove 99.95% of particles up to 0.50 m. The activated carbon filter element is for odor control. The filter consists of 50% active carbon and 50% Puratex. Puratex is a chemical filtration agent that that removes trace amounts of molecular contaminants, such as acids and alkalis. See the next page for a System Map. Page 6 of 7 Function Weller Ambient Fume Extraction System Map (c)2007 Cooper Industries, Ltd. Page 7 of 7 Competitive Comparison