UPC2909HF-AZ - Renesas Electronics

To our customers,

Old Company Name in Catalogs and Other Documents

On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology

Corporation, and Renesas Electronics Corporation took over all the business of both

companies. Therefore, although the old company name remains in this document, it is a valid

Renesas Electronics document. We appreciate your understanding.

Renesas Electronics website: http://www.renesas.com

April 1st, 2010

Renesas Electronics Corporation

Issued by: Renesas Electronics Corporation (http://www.renesas.com)

Send any inquiries to http://www.renesas.com/inquiry.

Notice

1. All information included in this document is current as of the date this document is issued. Such information, however, is

subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please

confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to

additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.

2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights

of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.

No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights

of Renesas Electronics or others.

3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.

4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of

semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,

and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by

you or third parties arising from the use of these circuits, software, or information.

5. When exporting the products or technology described in this document, you should comply with the applicable export control

laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas

Electronics products or the technology described in this document for any purpose relating to military applications or use by

the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and

technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited

under any applicable domestic or foreign laws or regulations.

6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics

does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages

incurred by you resulting from errors in or omissions from the information included herein.

7. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and

“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as

indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular

application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior

written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for

which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way

liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an

application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written

consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise

expressly specified in a Renesas Electronics data sheets or data books, etc.

“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual

equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.

“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-

crime systems; safety equipment; and medical equipment not specifically designed for life support.

“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or

systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare

intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.

8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,

especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation

characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or

damages arising out of the use of Renesas Electronics products beyond such specified ranges.

9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have

specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,

Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to

guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a

Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire

control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because

the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system

manufactured by you.

10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental

compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable

laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS

Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with

applicable laws and regulations.

11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas

Electronics.

12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this

document or Renesas Electronics products, or if you have any other inquiries.

(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-

owned subsidiaries.

(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.

DATA SHEET

BIPOLAR ANALOG INTEGRATED CIRCUIT

PC29xx Series

THREE TERMINAL LOW DROPOUT VOLTAGE REGULATOR

The

PC29xx series of low dropout voltage three terminal positive regulators is constructed with PNP output

transistor. The

PC29xx series feature the ability to source 1 A of output current with a low dropout voltage of typically

0.7 V.

The power dissipation of the

PC29xx series can be drastically reduced compared with the conventional three

terminal positive voltage regulators that is constructed with NPN output transistor. Also, this series corresponds to

the low voltage output (3.0 V, 3.3 V) which is not in the conventional low dropout regulators (

PC24xxA series).

FEATURES

•Output current in excess of 1.0 A

•Low dropout voltage

VDIF = 0.7 V TYP. (IO = 1 A)

•On-chip over-current and thermal protection circuit

•On-chip output transistor safe operating area protection circuit

PIN CONFIGURATIONS (Marking Side)

321

1: INPUT

2: GND

3: OUTPUT

PC29xxHF Series: Isolated TO-220 (MP-45G)

PC29xxHB Series: SC-64 (MP-3)

PC29xxT Series: SC-63 (MP-3Z)

321

1: INPUT

2: GND

3: OUTPUT

4: GND (Fin)

Note1

321

1: INPUT

2: GND

3: OUTPUT

4: GND (Fin)

Note2

Notes 1. No.2 pin and No.4 fin are common GND.

2. No.2 pin is cut. No.2 pin and No.4 fin are common GND.

Document No. G10026EJ4V0DS00 (4th edition)

Date Published September 2007 N

Printed in Japan

The information in this document is subject to change without notice. Before using this document, please

confirm that this is the latest version.

Not all products and/or types are available in every country. Please check with an NEC Electronics

sales representative for availability and additional information.

The mark <R> shows major revised points.

The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what." field.

<R>

PC29xx Series

2Data Sheet G10026EJ4V0DS

BLOCK DIAGRAM

Start-up

circuit

Reference

voltage

Thermal

shut down

Error

Amp. Drive

circuit

Saturation

protection

Safe operating

area protection

OUTPUT

GND

INPUT

Over-current

protection

PC29xx Series

Data Sheet G10026EJ4V0DS

ORDERING INFORMATION

Part Number Package Output Voltage Marking

PC2903HF Isolated TO-220 (MP-45G) 3.0 V 2903

PC2903HB SC-64 (MP-3) 3.0 V 2903

PC2903T SC-63 (MP-3Z) 3.0 V 2903

PC2933HF Isolated TO-220 (MP-45G) 3.3 V 2933

PC2933HB SC-64 (MP-3) 3.3 V 2933

PC2933T SC-63 (MP-3Z) 3.3 V 2933

PC2905HF Isolated TO-220 (MP-45G) 5.0 V 2905

PC2905HB SC-64 (MP-3) 5.0 V 2905

PC2905T SC-63 (MP-3Z) 5.0 V 2905

PC2906HF Isolated TO-220 (MP-45G) 6.0 V 2906

PC2906HB SC-64 (MP-3) 6.0 V 2906

PC2906T SC-63 (MP-3Z) 6.0 V 2906

PC2907HF Isolated TO-220 (MP-45G) 7.0 V 2907

PC2907HB SC-64 (MP-3) 7.0 V 2907

PC2907T SC-63 (MP-3Z) 7.0 V 2907

PC2908HF Isolated TO-220 (MP-45G) 8.0 V 2908

PC2908HB SC-64 (MP-3) 8.0 V 2908

PC2908T SC-63 (MP-3Z) 8.0 V 2908

PC2909HF Isolated TO-220 (MP-45G) 9.0 V 2909

PC2909HB SC-64 (MP-3) 9.0 V 2909

PC2909T SC-63 (MP-3Z) 9.0 V 2909

PC2910HF Isolated TO-220 (MP-45G) 10.0 V 2910

PC2910HB SC-64 (MP-3) 10.0 V 2910

PC2910T SC-63 (MP-3Z) 10.0 V 2910

PC2912HF Isolated TO-220 (MP-45G) 12.0 V 2912

PC2912HB SC-64 (MP-3) 12.0 V 2912

PC2912T SC-63 (MP-3Z) 12.0 V 2912

Remark Tape-packaged products have the symbol -E1, or -E2 suffixed to the part number. Pb-free products have

the symbol -AZ, or -AY suffixed to the part number. Refer to the following table for details.

<R>

PC29xx Series

4Data Sheet G10026EJ4V0DS

Part Number Note1 Package Packege Type

PC29xxHF Isolated TO-220 (MP-45G) • Packed in envelop

PC29xxHF-AZ Note2 Isolated TO-220 (MP-45G) • Packed in envelop

PC29xxHB SC-64 (MP-3) • Packed in envelop

PC29xxHB-AZ Note2 SC-64 (MP-3) • Packed in envelop

PC29xxHB-AY Note3 SC-64 (MP-3) • Packed in envelop

PC29xxT-E1 SC-63 (MP-3Z) • 16 mm wide embossed taping

• Pin 1 on draw-out side

• 2000 pcs/reel

PC29xxT-E1-AZ Note2 SC-63 (MP-3Z) • 16 mm wide embossed taping

• Pin 1 on draw-out side

• 2000 pcs/reel

PC29xxT-E1-AY Note3 SC-63 (MP-3Z) • 16 mm wide embossed taping

• Pin 1 on draw-out side

• 2000 pcs/reel

PC29xxT-E2 SC-63 (MP-3Z) • 16 mm wide embossed taping

• Pin 1 at take-up side

• 2000 pcs/reel

PC29xxT-E2-AZ Note2 SC-63 (MP-3Z) • 16 mm wide embossed taping

• Pin 1 at take-up side

• 2000 pcs/reel

PC29xxT-E2-AY Note3 SC-63 (MP-3Z) • 16 mm wide embossed taping

• Pin 1 at take-up side

• 2000 pcs/reel

Notes 1. xx stands for symbols that indicate the output voltage.

2. Pb-free (This product does not contain Pb in the external electrode.)

3. Pb-free (This product does not contain Pb in the external electrode, Sn100% plating.)

PC29xx Series

Data Sheet G10026EJ4V0DS

ABSOLUTE MAXIMUM RATINGS (TA = 25°C, Unless otherwise specified.)

Parameter Symbol

Rating

Unit

PC29xxHF

PC29xxHB,

PC29xxT

Input Voltage VIN 20 V

Internal Power Dissipation (TC = 25°C)

Note PT15 10 W

Operating Ambient Temperature TA–30 to +85 °C

Operating Junction Temperature TJ–30 to +150 °C

Storage Temperature Tstg –55 to +150 °C

Thermal Resistance (Junction to Case) Rth (J-C) 712.5 °C/W

Thermal Resistance (Junction to Ambient)

Rth (J-A) 65 125 °C/W

Note Internally limited. When the operating junction temperature rises above 150°C, the internal circuit shuts down

the output voltage.

Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any

parameter. That is, the absolute maximum ratings are rated values at which the product is on the

verge of suffering physical damage, and therefore the product must be used under conditions that

ensure that the absolute maximum ratings are not exceeded.

TYPICAL CONNECTION

PC29xx

INPUT

OUT

OUTPUT

CIN :0.1

F or higher. Be sure to connect CIN to prevent parasitic oscillation. Set this value according to the

length of the line between the regulator and the INPUT pin. Use of a film capacitor or other capacitor

with first-rate voltage and temperature characteristics is recommended. If using a laminated ceramic

capacitor, it is necessary to ensure that CIN is 0.1

F or higher for the voltage and temperature range

to be used.

COUT :47

F or higher. Be sure to connect COUT to prevent oscillation and improve excessive load regulation.

Place CIN and COUT as close as possible to the IC pins (within 1 to 2 cm). Also, use an electrolytic capacitor

with low impedance characteristics if considering use at sub-zero temperatures.

D1:If the OUTPUT pin has a higher voltage than the INPUT pin, connect a diode.

D2:If the OUTPUT pin has a lower voltage than the GND pin, connect a Schottky barrier diode.

Caution Make sure that no voltage is applied to the OUTPUT pin from external.

PC29xx Series

6Data Sheet G10026EJ4V0DS

RECOMMENDED OPERATING CONDITIONS

Parameter Symbol Type Number MIN. TYP. MAX. Unit

Input Voltage VIN

PC2903 4.0 16

PC2933 4.3 16

PC2905 6 16

PC2906 7 16

PC2907 8 16 V

PC2908 9 18

PC2909 10 18

PC2910 11 18

PC2912 13 18

Output Current IOall 0 1.0 A

Operating Ambient Temperature TAall –30 +85 °C

Operating Junction Temperature TJall –30 +125 °C

ELECTRICAL CHARACTERISTICS

PC2903 (TJ = 25°C, VIN = 5 V, IO = 500 mA, CIN = 0.22

F, COUT = 47

F, unless otherwise specified.)

Parameters Symbol Conditions MIN. TYP. MAX. Unit

Output Voltage VO2.88 3.0 3.12

0°C

≤

125°C, 4.0 V

≤

VIN

≤

16 V,

0 A ≤ IO ≤ 500 mA 2.85 3.15

0°C ≤ TJ ≤ 125°C, 0 A ≤ IO ≤ 1 A

Line Regulation REGIN 4.0 V ≤ VIN ≤ 16 V 11 30 mV

Load Regulation REGL0 A ≤ IO ≤ 1 A 9 30 mV

Quiescent Current IBIAS IO = 0 A 1.9 4.0

IO = 1 A 23 60

Startup Quiescent Current IBIAS (s) VIN = 2.95 V, IO = 0 A 12 30

VIN = 2.95 V, IO = 1 A 80

Quiescent Current Change ∆IBIAS

0°C

≤

125°C, 4.0 V

≤

VIN

≤

16 V

3.2 20 mA

Output Noise Voltage Vn10 Hz ≤ f ≤ 100 kHz 52

Vr.m.s.

Ripple Rejection R·R f = 120 Hz, 4.0 V ≤ VIN ≤ 16 V 48 63 dB

Dropout Voltage VDIF 0°C ≤ TJ ≤ 125°C, IO = 1 A 0.7 1.0 V

Short Circuit Current IO short VIN = 4.5 V 1.2 1.7 3.0

VIN = 16 V 1.2

Peak Output Current IO peak VIN = 4.5 V 1.0 1.5 3.0

VIN = 16 V 1.3 1.7 2.8

Temperature Coefficient of ∆VO/∆T0°C ≤ TJ ≤ 125°C, IO = 5 mA –0.5 mV/°C

Output Voltage

PC29xx Series

Data Sheet G10026EJ4V0DS

PC2933 (TJ = 25°C, VIN = 5 V, IO = 500 mA, CIN = 0.22

F, COUT = 47

F, unless otherwise specified.)

Parameters Symbol Conditions MIN. TYP. MAX. Unit

Output Voltage VO3.17 3.3 3.43

0°C

≤

125°C, 4.3 V

≤

VIN

≤

16 V,

0 A ≤ IO ≤ 500 mA 3.14 3.46

0°C ≤ TJ ≤ 125°C, 0 A ≤ IO ≤ 1 A

Line Regulation REGIN 4.3 V ≤ VIN ≤ 16 V 12 33 mV

Load Regulation REGL0 A ≤ IO ≤ 1 A 23 33 mV

Quiescent Current IBIAS IO = 0 A 2.0 4.0

IO = 1 A 30 60

Startup Quiescent Current IBIAS (s) VIN = 3.1 V, IO = 0 A 10 30

VIN = 3.1 V, IO = 1 A 80

Quiescent Current Change ∆IBIAS

0°C

≤

125°C, 4.3 V

≤

VIN

≤

16 V

3.0 20 mA

Output Noise Voltage Vn10 Hz ≤ f ≤ 100 kHz 55

Vr.m.s.

Ripple Rejection R·R f = 120 Hz, 4.3 V ≤ VIN ≤ 16 V 48 64 dB

Dropout Voltage VDIF 0°C ≤ TJ ≤ 125°C, IO = 1 A 0.7 1.0 V

Short Circuit Current IO short VIN = 4.5 V 1.2 1.6 3.0

VIN = 16 V 1.2

Peak Output Current IO peak VIN = 4.5 V 1.0 1.4 3.0

VIN = 16 V 1.3 1.7 2.8

Temperature Coefficient of ∆VO/∆T0°C ≤ TJ ≤ 125°C, IO = 5 mA –0.4 mV/°C

Output Voltage

PC29xx Series

8Data Sheet G10026EJ4V0DS

PC2905 (TJ = 25°C, VIN = 8 V, IO = 500 mA, CIN = 0.22

F, COUT = 47

F, unless otherwise specified.)

Parameters Symbol Conditions MIN. TYP. MAX. Unit

Output Voltage VO4.8 5.0 5.2

0°C ≤ TJ ≤ 125°C, 6 V ≤ VIN ≤ 16 V,

0 A ≤ IO ≤ 500 mA 4.75 5.25

0°C ≤ TJ ≤ 125°C, 0 A ≤ IO ≤ 1 A

Line Regulation REGIN 6 V ≤ VIN ≤ 16 V 23 50 mV

Load Regulation REGL0 A ≤ IO ≤ 1 A 28 50 mV

Quiescent Current IBIAS IO = 0 A 2.2 4.0

IO = 1 A 30 60

Startup Quiescent Current IBIAS (s) VIN = 4.5 V, IO = 0 A 10 30

VIN = 4.5 V, IO = 1 A 80

Quiescent Current Change ∆IBIAS

0°C

≤

125°C, 6 V

≤

VIN

≤

16 V

2.9 20 mA

Output Noise Voltage Vn10 Hz ≤ f ≤ 100 kHz 90

Vr.m.s.

Ripple Rejection R·R f = 120 Hz, 6 V ≤ VIN ≤ 16 V 46 61 dB

Dropout Voltage VDIF 0°C ≤ TJ ≤ 125°C, IO = 1 A 0.7 1.0 V

Short Circuit Current IO short VIN = 6.5 V 1.15 1.8 3.0

VIN = 16 V 1.1

Peak Output Current IO peak VIN = 6.5 V 1.1 1.5 3.0

VIN = 16 V 1.4 2.0 2.8

Temperature Coefficient of ∆VO/∆T0°C ≤ TJ ≤ 125°C, IO = 5 mA 0.6 mV/°C

Output Voltage

PC29xx Series

Data Sheet G10026EJ4V0DS

PC2906 (TJ = 25°C, VIN = 9 V, IO = 500 mA, CIN = 0.22

F, COUT = 47

F, unless otherwise specified.)

Parameters Symbol Conditions MIN. TYP. MAX. Unit

Output Voltage VO5.76 6.0 6.24

0°C ≤ TJ ≤ 125°C, 7 V ≤ VIN ≤ 16 V,

0 A ≤ IO ≤ 500 mA 5.70 6.30

0°C ≤ TJ ≤ 125°C, 0 A ≤ IO ≤ 1 A

Line Regulation REGIN 7 V ≤ VIN ≤ 16 V 25 60 mV

Load Regulation REGL0 A ≤ IO ≤ 1 A 29 60 mV

Quiescent Current IBIAS IO = 0 A 2.0 4.0

IO = 1 A 23 60

Startup Quiescent Current IBIAS (s) VIN = 5.5 V, IO = 0 A 10 30

VIN = 5.5 V, IO = 1 A 80

Quiescent Current Change ∆IBIAS

0°C

≤

125°C, 7 V

≤

VIN

≤

16 V

2.2 20 mA

Output Noise Voltage Vn10 Hz ≤ f ≤ 100 kHz 108

Vr.m.s.

Ripple Rejection R·R f = 120 Hz, 7 V ≤ VIN ≤ 16 V 44 60 dB

Dropout Voltage VDIF 0°C ≤ TJ ≤ 125°C, IO = 1 A 0.7 1.0 V

Short Circuit Current IO short VIN = 7.5 V 1.8

VIN = 16 V 1.1

Peak Output Current IO peak VIN = 7.5 V 1.1 1.5 3.0

VIN = 16 V 1.4 2.0 2.8

Temperature Coefficient of ∆VO/∆T0°C ≤ TJ ≤ 125°C, IO = 5 mA 0.6 mV/°C

Output Voltage

PC29xx Series

10 Data Sheet G10026EJ4V0DS

PC2907 (TJ = 25°C, VIN = 10 V, IO = 500 mA, CIN = 0.22

F, COUT = 47

F, unless otherwise specified.)

Parameters Symbol Conditions MIN. TYP. MAX. Unit

Output Voltage VO6.72 7.0 7.28

0°C ≤ TJ ≤ 125°C, 8 V ≤ VIN ≤ 16 V,

0 A ≤ IO ≤ 500 mA 6.65 7.35

0°C ≤ TJ ≤ 125°C, 0 A ≤ IO ≤ 1 A

Line Regulation REGIN 8 V ≤ VIN ≤ 16 V 27 70 mV

Load Regulation REGL0 A ≤ IO ≤ 1 A 30 70 mV

Quiescent Current IBIAS IO = 0 A 2.0 4.0

IO = 1 A 24 60

Startup Quiescent Current IBIAS (s) VIN = 6.5 V, IO = 0 A 10 30

VIN = 6.5 V, IO = 1 A 80

Quiescent Current Change ∆IBIAS

0°C

≤

125°C, 8 V

≤

VIN

≤

16 V

2.3 20 mA

Output Noise Voltage Vn10 Hz ≤ f ≤ 100 kHz 126

Vr.m.s.

Ripple Rejection R·R f = 120 Hz, 8 V ≤ VIN ≤ 16 V 43 59 dB

Dropout Voltage VDIF 0°C ≤ TJ ≤ 125°C, IO = 1 A 0.7 1.0 V

Short Circuit Current IO short VIN = 8.5 V 1.8

VIN = 16 V 1.1

Peak Output Current IO peak VIN = 8.5 V 1.1 1.5 3.0

VIN = 16 V 1.4 2.0 2.8

Temperature Coefficient of ∆VO/∆T0°C ≤ TJ ≤ 125°C, IO = 5 mA 0.6 mV/°C

Output Voltage

PC29xx Series

Data Sheet G10026EJ4V0DS

PC2908 (TJ = 25°C, VIN = 11 V, IO = 500 mA, CIN = 0.22

F, COUT = 47

F, unless otherwise specified.)

Parameters Symbol Conditions MIN. TYP. MAX. Unit

Output Voltage VO7.68 8.0 8.32

0°C ≤ TJ ≤ 125°C, 9 V ≤ VIN ≤ 18 V,

0 A ≤ IO ≤ 500 mA 7.6 8.4

0°C ≤ TJ ≤ 125°C, 0 A ≤ IO ≤ 1 A

Line Regulation REGIN 9 V ≤ VIN ≤ 18 V 31 80 mV

Load Regulation REGL0 A ≤ IO ≤ 1 A 30 80 mV

Quiescent Current IBIAS IO = 0 A 1.9 4.0

IO = 1 A 25 60

Startup Quiescent Current IBIAS (s) VIN = 7.5 V, IO = 0 A 10 30

VIN = 7.5 V, IO = 1 A 80

Quiescent Current Change ∆IBIAS

0°C

≤

125°C, 9 V

≤

VIN

≤

18 V

2.4 20 mA

Output Noise Voltage Vn10 Hz ≤ f ≤ 100 kHz 145

Vr.m.s.

Ripple Rejection R·R f = 120 Hz, 9 V ≤ VIN ≤ 18 V 42 58 dB

Dropout Voltage VDIF 0°C ≤ TJ ≤ 125°C, IO = 1 A 0.7 1.0 V

Short Circuit Current IO short VIN = 9.5 V 1.9

VIN = 18 V 1.0

Peak Output Current IO peak VIN = 9.5 V 1.1 1.5 3.0

VIN = 18 V 1.4 2.0 2.8

Temperature Coefficient of ∆VO/∆T0°C ≤ TJ ≤ 125°C, IO = 5 mA 0.6 mV/°C

Output Voltage

PC29xx Series

12 Data Sheet G10026EJ4V0DS

PC2909 (TJ = 25°C, VIN = 12 V, IO = 500 mA, CIN = 0.22

F, COUT = 47

F, unless otherwise specified.)

Parameters Symbol Conditions MIN. TYP. MAX. Unit

Output Voltage VO8.64 9.0 9.36

0°C ≤ TJ ≤ 125°C, 10 V ≤ VIN ≤ 18 V,

0 A ≤ IO ≤ 500 mA 8.55 9.45

0°C ≤ TJ ≤ 125°C, 0 A ≤ IO ≤ 1 A

Line Regulation REGIN 10 V ≤ VIN ≤ 18 V 31 90 mV

Load Regulation REGL0 A ≤ IO ≤ 1 A 32 90 mV

Quiescent Current IBIAS IO = 0 A 1.9 4.0

IO = 1 A 27 60

Startup Quiescent Current IBIAS (s) VIN = 8.5 V, IO = 0 A 11 30

VIN = 8.5 V, IO = 1 A 80

Quiescent Current Change ∆IBIAS

0°C ≤ T

≤ 125°C, 10 V ≤ V

≤ 18 V

3.0 20 mA

Output Noise Voltage Vn10 Hz ≤ f ≤ 100 kHz 155

Vr.m.s.

Ripple Rejection R·R f = 120 Hz, 10 V ≤ VIN ≤ 18 V 41 58 dB

Dropout Voltage VDIF 0°C ≤ TJ ≤ 125°C, IO = 1 A 0.7 1.0 V

Short Circuit Current IO short VIN = 10.5 V 1.9

VIN = 18 V 1.0

Peak Output Current IO peak VIN = 10.5 V 1.1 1.5 3.0

VIN = 18 V 1.4 2.0 3.0

Temperature Coefficient of ∆VO/∆T0°C ≤ TJ ≤ 125°C, IO = 5 mA 1.0 mV/°C

Output Voltage

PC29xx Series

Data Sheet G10026EJ4V0DS

PC2910 (TJ = 25°C, VIN = 13 V, IO = 500 mA, CIN = 0.22

F, COUT = 47

F, unless otherwise specified.)

Parameters Symbol Conditions MIN. TYP. MAX. Unit

Output Voltage VO9.6 10.0 10.4

0°C ≤ TJ ≤ 125°C, 11 V ≤ VIN ≤ 18 V,

0 A ≤ IO ≤ 500 mA 9.5 10.5

0°C ≤ TJ ≤ 125°C, 0 A ≤ IO ≤ 1 A

Line Regulation REGIN 11 V ≤ VIN ≤ 18 V 35 100 mV

Load Regulation REGL0 A ≤ IO ≤ 1 A 33 100 mV

Quiescent Current IBIAS IO = 0 A 2.0 4.0

IO = 1 A 25 60

Startup Quiescent Current IBIAS (s) VIN = 9.5 V, IO = 0 A 10 30

VIN = 9.5 V, IO = 1 A 80

Quiescent Current Change ∆IBIAS

0°C

≤

125°C, 11 V

≤

VIN

≤

18 V

1.9 20 mA

Output Noise Voltage Vn10 Hz ≤ f ≤ 100 kHz 180

Vr.m.s.

Ripple Rejection R·R f = 120 Hz, 11 V ≤ VIN ≤ 18 V 40 56 dB

Dropout Voltage VDIF 0°C ≤ TJ ≤ 125°C, IO = 1 A 0.7 1.0 V

Short Circuit Current IO short VIN = 11.5 V 1.7

VIN = 18 V 1.0

Peak Output Current IO peak VIN = 11.5 V 1.1 1.6 3.0

VIN = 18 V 1.4 2.0 3.0

Temperature Coefficient of ∆VO/∆T0°C ≤ TJ ≤ 125°C, IO = 5 mA 2.1 mV/°C

Output Voltage

PC29xx Series

14 Data Sheet G10026EJ4V0DS

PC2912 (TJ = 25°C, VIN = 15 V, IO = 500 mA, CIN = 0.22

F, COUT = 47

F, unless otherwise specified.)

Parameters Symbol Conditions MIN. TYP. MAX. Unit

Output Voltage VO11.52 12 12.48

0°C ≤ TJ ≤ 125°C, 13 V ≤ VIN ≤ 18 V,

0 A ≤ IO ≤ 500 mA 11.4 12.6

0°C ≤ TJ ≤ 125°C, 0 A ≤ IO ≤ 1 A

Line Regulation REGIN 13 V ≤ VIN ≤ 18 V 38 120 mV

Load Regulation REGL0 A ≤ IO ≤ 1 A 35 120 mV

Quiescent Current IBIAS IO = 0 A 2.1 4.0

IO = 1 A 26 60

Startup Quiescent Current IBIAS (s) VIN = 11.5 V, IO = 0 A 10 30

VIN = 11.5 V, IO = 1 A 80

Quiescent Current Change ∆IBIAS

0°C

≤

125°C, 13 V

≤

VIN

≤

18 V

1.5 20 mA

Output Noise Voltage Vn10 Hz ≤ f ≤ 100 kHz 210

Vr.m.s.

Ripple Rejection R·R f = 120 Hz, 13 V ≤ VIN ≤ 18 V 40 52 dB

Dropout Voltage VDIF 0°C ≤ TJ ≤ 125°C, IO = 1 A 0.7 1.0 V

Short Circuit Current IO short VIN = 14 V 1.7

VIN = 18 V 1.0

Peak Output Current IO peak VIN = 14 V 1.1 1.6 3.0

VIN = 18 V 1.4 2.0 3.0

Temperature Coefficient of ∆VO/∆T0°C ≤ TJ ≤ 125°C, IO = 5 mA 2.1 mV/°C

Output Voltage

PC29xx Series

Data Sheet G10026EJ4V0DS

TYPICAL CHARACTERISTICS

050100 15085

TA - Operating Ambient Temperature -°C

Pd - Total Power Dissipation - W

Pd vs TA

With infinite heatsink

Without heatsink

1.92

1.0

300

200

100

–100

–200

–300

–400

0 100 150

TJ - Operating Junction Temperature - °C

∆VO - Output Voltage Change - mV

∆VO vs TJ

4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.5

07182

VIN - Input Voltage - V

VO - Ouput Voltage - V

VO vs VIN ( PC2933)

0182204

VIN - Input Voltage - V

IBIAS - Quiescent Current - mA

IBIAS (IBIAS (s)) vs VIN ( PC2933)

1.0

0.8

0.6

0.4

0.2

–25 +1250 +150+75

TJ - Operating Junction Temperature - °C

VDIF - Dropout Voltage - V

VDIF vs TJ

3.0

2.0

1.0

015520

VDIF - Dropout Voltage - V

IO peak - Peak Output Current - A

IO peak vs VDIF ( PC2933)

IO = 5 mA

–50 50

PC2912

PC2905

PC2933

Solid line : PC29xxHF Series

Broken line: PC29xxHB Series

PC29xxT Series

3564

TJ = 25°C

IO = 1.0 A

IO = 0.5 A

IO = 5 mA

TJ = 25°C

6101416128

IO = 1 A

IO = 0.5 A

IO = 0 A

+100+50+25

IO = 1.0 A

PC2933

PC2905

PC2906

PC2907

PC2908

PC2909

PC2910

PC2912

TJ = 0°C

TJ = 125°C

TJ = 25°C

µµ

PC29xx Series

16 Data Sheet G10026EJ4V0DS

IO peak vs VDIF ( PC2905)

IO peak - Peak Output Current - A

3.0

2.0

1.0

05101520

VDIF - Dropout Voltage - V

R · R vs f

R · R - Ripple Rejection - dB

100 1 k 10 k 100 k

f - Frequency - Hz

R · R vs IO ( PC2933)

R · R - Ripple Rejection - dB

0.2 0.4 0.6 1.0

IO - Output Current - A

VDIF vs IO ( PC2933)

VDIF - Dropout Voltage - V

1.0

0.2 0.4 0.6 1.0

IO - Output Current - A

0.8

0.6

0.4

0.2

0.80

0.8

VO vs IO ( PC2933)

VO - Output Voltage - V

0 0.4 0.8 1.2 2.4

IO - Output Current - A

1.6

2.0

TJ = 25°C

TJ = 125°C

TJ = 25°C

IO = 1 A

PC2933

PC2912

TJ = 25°CTJ = 25°C

4.3 V ≤ VIN ≤ 16 V

f = 120 Hz

TJ = 25°C

VIN = 16 V VIN = 5 V

TJ = 0°C

PC2905

PC29xx Series

Data Sheet G10026EJ4V0DS

PACKAGE DRAWINGS

PC29xxHF Series

D17.0±0.3

3PIN PLASTIC SIP (MP-45G)

NOTE

Each lead centerline is located within 0.25 mm of

its true position (T.P.) at maximum material condition.

ITEM MILLIMETERS

P3HF-254B-4

G0.25

H2.54 (T.P.)

A10.0±0.2

I5.0±0.3

U2.4±0.5

Y8.9±0.7

Z1.30±0.2

L8.5±0.2

B7.0±0.2

C1.50±0.2

F0.75±0.10

M8.5±0.2

P2.8±0.2

3.3±0.2

2.46±0.2

5.0±0.2

4.5±0.2

0.65±0.10

132

PC29xx Series

18 Data Sheet G10026EJ4V0DS

PC29xxHB Series

SC-64 (MP-3) (Unit: mm)

PC29xxT Series

SC-63 (MP-3Z) (Unit: mm)

2.3 2.3

1.1±0.1

5.0±0.2

5.5±0.27.0 MIN.

13.7 MIN.

6.5±0.2 2.3±0.2

0.5±0.1

1.6±0.2

0.5

+0.2

–0.1

0.5

+0.2

–0.1

1.5

+0.2

–0.1

0.75

123

6.5±0.2

4.4±0.2

5.0±0.2

0.5±0.1

2.3±0.3 2.3±0.3

5.6±0.3

9.5±0.5

2.5±0.5

1.0±0.5

5.5±0.2

1.5

+0.2

2.3±0.2

0.5±0.1

Note

0.4 MIN.

0.5 TYP.

0.15±0.15

−0.1

<R>

Note The depth of notch at the top of the fin is from 0 to 0.2 mm.

PC29xx Series

Data Sheet G10026EJ4V0DS

RECOMMENDED SOLDERING CONDITIONS

When soldering this product, it is highly recommended to observe the conditions as shown below. If other soldering

processes are used, or if the soldering is perfomed under different condition, please make sure to consult with our

sales offices.

For more details, refer to the Semiconductor Device Mount Manual

(http://www.necel.com/pkg/en/mount/index.html)

Surface mount devices

PC29xxT Series: SC-63 (MP-3Z)

Process Conditions Symbol

Infrared ray reflow Peak temperature: 235°C or below (Package surface temperature), IR35-00-3

Reflow time: 30 seconds or less (at 210°C or higher),

Maximum number of reflow processes: 3 times or less.

VPS Peak temperature: 215°C or below (Package surface temperature), VP15-00-3

Reflow time: 40 seconds or less (at 200°C or higher),

Maximum number of reflow processes: 3 times or less.

Partial heating method Pin temperature: 350°C or below, P350

Heat time: 3 seconds or less (Per each side of the device).

Caution Apply only one kind of soldering condition to a device, except for “partial heating method”, or the

device will be damaged by heat stress.

Remark Flux: Rosin-based flux sith low chlorine content (chlorine 0.2 Wt% or below) is recommended.

PC29xxT-AZ Series Note1,

PC29xxT-AY Series Note2: SC-63 (MP-3Z)

Process Conditions Symbol

Infrared ray reflow Peak temperature: 260°C or below (Package surface temperature), IR60-00-3

Reflow time: 60 seconds or less (at 220°C or higher),

Maximum number of reflow processes: 3 times or less.

Partial heating method Pin temperature: 350°C or below, P350

Heat time: 3 seconds or less (Per each side of the device).

Notes 1. Pb-free (This product does not contain Pb in the external electrode.)

2. Pb-free (This product does not contain Pb in the external electrode, Sn100% plating.)

Caution Apply only one kind of soldering condition to a device, except for “partial heating method”, or the

device will be damaged by heat stress.

Remark Flux: Rosin-based flux sith low chlorine content (chlorine 0.2 Wt% or below) is recommended.

<R>

PC29xx Series

20 Data Sheet G10026EJ4V0DS

Through-hole devices

PC29xxHF Series,

PC29xxHF-AZ Series Note1: Isolated TO-220 (MP-45G)

PC29xxHB Series,

PC29xxHB-AZ Series Note1,

PC29xxHB-AY Series Note2: SC-64 (MP-3)

Process Conditions Symbol

Wave soldering Solder temperature: 260°C or below, WS60-00-1

(only to leads) Flow time: 10 seconds or less.

Partial heating method Pin temperature: 350°C or below, P350

Heat time: 3 seconds or less (Per each pin).

Notes 1. Pb-free (This product does not contain Pb in the external electrode.)

2. Pb-free (This product does not contain Pb in the external electrode, Sn100% plating.)

Caution For through-hole device, the wave soldering process must be applied only to leads, and make sure

that the package body does not get jet soldered.

CAUTION ON USE

When using the

PC29xx series at the input voltage which is lower than in the recommended operating condition,

the high quiescent current flows through devices because the transistor of the output paragraph is saturated (Refer

to “IBIAS (IBIAS (s)) vs VIN curves in TYPICAL CHARACTERISTICS”). The

PC29xx series have saturation protection

circuits, but they sometimes need about 80 mA current. Therefore the power supply on the input needs the enough

current capacity to pass this quiescent current when the devices startup.

REFERENCE DOCUMENTS

USER'S MANUAL USAGE OF THREE TERMINAL REGULATORS Document No.G12702E

REVIEW OF QUALITY AND RELIABILITY HANDBOOK Document No.C12769E

INFORMATION VOLTAGE REGULATOR OF SMD Document No.G11872E

SEMICONDUCTOR DEVICE MOUNT MANUAL http://www.necel.com/pkg/en/mount/index.html

<R>

PC29xx Series

The information in this document is current as of September, 2007. The information is subject to

change without notice. For actual design-in, refer to the latest publications of NEC Electronics data

sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not

all products and/or types are available in every country. Please check with an NEC Electronics sales

representative for availability and additional information.

No part of this document may be copied or reproduced in any form or by any means without the prior

written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may

appear in this document.

NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual

property rights of third parties by or arising from the use of NEC Electronics products listed in this document

or any other liability arising from the use of such products. No license, express, implied or otherwise, is

granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.

Descriptions of circuits, software and other related information in this document are provided for illustrative

purposes in semiconductor product operation and application examples. The incorporation of these

circuits, software and information in the design of a customer's equipment shall be done under the full

responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by

customers or third parties arising from the use of these circuits, software and information.

While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,

customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To

minimize risks of damage to property or injury (including death) to persons arising from defects in NEC

Electronics products, customers must incorporate sufficient safety measures in their design, such as

redundancy, fire-containment and anti-failure features.

NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and

"Specific".

The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-

designated "quality assurance program" for a specific application. The recommended applications of an NEC

Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of

each NEC Electronics product before using it in a particular application.

The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC

Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications

not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to

determine NEC Electronics' willingness to support a given application.

(Note)

•

M8E 02. 11-1

(1)

(2)

"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its

majority-owned subsidiaries.

"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as

defined above).

Computers, office equipment, communications equipment, test and measurement equipment, audio

and visual equipment, home electronic appliances, machine tools, personal electronic equipment

and industrial robots.

Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster

systems, anti-crime systems, safety equipment and medical equipment (not specifically designed

for life support).

Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life

support systems and medical equipment for life support, etc.

"Standard":

"Special":

"Specific":