Connectivity solutions for photovoltaic power systems LC3(R)-CP - Connector Parts without cable LC3-CP 30 LC3-CP 31 LC3(R) photovoltaic connector, field-attachable, with crimp contact LC3-CP 30: plug LC3-CP 31: socket 1. Temperature range 2. Materials LC3-CP 30 Insulating body/housing Contact pin/bush Contact protection (plugs only) Sleeve (sockets only) Cap nut Seal LC3-CP 31 -40 C/+85 C (+110 C upper limit temperature) halogen-free, UV-resistant TPU, V0 according to UL 94 CuZn, pre-nickeled and tin-plated PA, V0 according to UL 94 CuZn, vernickelt PA, V0 according to UL 94 NBR 3. Mechanical data 89 N Insertion force1 89 N Withdrawal force1 1 50 Mating cycles 2 2-3 Nm Tightening torque cap nut Mating with photovoltaic connectors LC3 3 IP 68 Protection degree Connectable conductors crimp terminal Photovoltaic cable, double-insulated4 Section LC3-CP 3... 2.5 2.5 mm (AWG 14) Section LC3-CP 3... 4.0 4.0 mm (AWG 12) Section LC3-CP 3... 6.0 6.0 mm (AWG 10) Cable diameter 4-8 mm Approved cables on the Internet site www.lumberg.com 4. Electrical data (at Tamb 20 C) Contact resistance1 Rated current1 LC3-CP 3... 2.5 Rated current1 LC3-CP 3... 4.0 Rated current1 LC3-CP 3... 6.0 Rated voltage5 Overvoltage category5 Material group5 Creepage distance Clearance Insulation resistance 1 2 3 4 5 5 m 22 A at Tamb 85 C 35 A at Tamb 85 C 40 A at Tamb 85 C 1000 V DC III (8 kV) I (IEC)/0 (UL) (CTI 600) 12.5 mm 12.5 mm > 10 G measured with a proper counterpart strain relief test according to TUV specification ensured by use of cable according to Lumberg specification only in mated condition with a proper counterpart IP X8 requirements under agreement between manufacturer and user wire construction preferably according to IEC 60228 class 5, for more details see separate data sheet on request according to DIN EN 60664/IEC 60664 resp. according to ANSI/UL 746A Composition of type designation Series: LC3 or LC4 Type of product CP Connector Part Configuration 30 field-attachable plug 31 field-attachable socket Polarity -1 + -2 - Cable section 2.5 2.5 mm (AWG 14) 4.0 4.0 mm (AWG 12) 6.0 6.0 mm (AWG 10) Package unit option 50 pieces (standard, individual parts in bulk, sorted) VP7 500 pieces (individual parts in bulk, sorted) VP19 50 pieces (one plastic bag per connector) *a recess for optional unmating preventer LC3-CX 90 according to NEC 2008 NFPA 70 *b marking + on LC3-CP ...-1, - on LC3-CP ...-2 Standard packaging: individual parts in bulk, sorted in plastic bags of 50 pieces, in a cardboard box www.lumberg.com LC3-CP 30-1 4.0 VP7 11/2012