a~í~=pÜÉÉía~í~=pÜÉÉí
EPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS’ prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Power line chokes
Current-compensated ring core double chokes
250 V AC, 1.2 … 68 mH, 0.3 … 3 A, +40 °C / +60 °C
Series/Type: B82722A/J
Date: October 2016
210/16
Please read Cautions and warnings and
Important notes at the end of this document.
Rated voltage 250 V AC
Rated inductance 1.2 ... 68 mH
Rated current 0.3 ... 3 A / +40 °C, +60 °C
Construction
Current-compensated ring core double choke
Ferrite core wih epoxy coating (UL 94 V-0)
Plastic case with in-molded pins (UL 94 V-0)1)
Potting (UL 94 V-0)
Sector winding
Features
High resonance frequency due to special winding technique
Approx. 1% stray inductance for symmetrical interference suppression
Suitable for wave soldering
Design complies with EN 60938-2 (VDE 0565-2) and UL 1283
UL2) and/or ENEC (VDE) approvals
RoHS-compatible
Applications
Suppression of common-mode interferences
Switch-mode power applications
Electronic ballasts in lamps
Power inverters
Terminals
Base material CuNi18Zn20
Layer composition Ni, Sn
Hot-dipped
Pins 0.7 0.7 (mm)
Lead spacing 10 12.5 (mm) or 20 12.5 (mm)
Marking
Product brand, approval signs and VDE standard number, ordering code, graphic symbol, rated
current, rated voltage, rated inductance, date of manufacture (YYWWD.internal ID code)
Delivery mode
Blister tray in cardboard box
1) Additionally certifie d values:
Glow wire flammability index (G WFI to IE C 60695- 2-12): +850 °C
Glow wire ignition te mperature (GWIT to IEC 606 95-2-13): +775 °C
Comparative tracking index (CT I to IEC 60112): 175 V
Ball pressure test (B P to IEC 60695-10 -2): +125 °C
2) UL approval with 300 V AC
B82722A
B82722J
B82722A/JPower line chokes
Current-compensated ring core double chokes
310/16
Please read Cautions and warnings and
Important notes at the end of this document.
Dimensional drawings and pin configurations
Horizontal version (B82722A)
Vertical version (B82722J)
B82722A/JPower line chokes
Current-compensated ring core double chokes
410/16
Please read Cautions and warnings and
Important notes at the end of this document.
Technical data and measuring conditions
Rated voltage VR250 V AC (50/60 Hz)
Test voltage Vtest 1500 V AC, 2 s (line/line)
Rated temperature TR+40 °C or +60 °C
Rated current IRReferred to 50 Hz and rated temperature
Rated inductance LRMeasured with Agilent 4284A at 10 kHz, 0.1 mA, +20 °C
Inductance is specified per winding.
Inductance tolerance 30% at +20 °C
Inductance decreaseL/L0< 10% at DC magnetic bias with IR, +20 °C
Stray inductance Lstray,typ Measured with Agilent 4284A at 10 kHz, 5 mA, +20 °C,
typical values
DC resistance Rtyp Measured at +20 °C, typical values, specified per
winding
Solderability (lead-free) Sn96.5Ag3.0Cu0.5: +(245 3) °C, (3 0.3) s
Wetting of soldering area 95%
(to IEC 60068-2-20, test Ta)
Resistance to soldering heat
(wave soldering) +(260 5) °C, (10 1) s
(to IEC 60068-2-20, test Tb)
Climatic category 40/125/56 (to IEC 60068-1)
Storage conditions (packaged) –25 °C … +40 °C, 75% RH
Weight Approx. 10 g
Approvals IEC/EN 60938-2, UL 1283 (E70122)
B82722A/JPower line chokes
Current-compensated ring core double chokes
510/16
Please read Cautions and warnings and
Important notes at the end of this document.
Characteristics and ordering codes
= approval granted
IR
ALR
mH Lstray,typ
HRtyp
m
TR
°C Ordering code Approvals
Horizontal version Vertical version
0.3 68 800 2500 +60 B82722A2301N002 B82722J2301N002 
0.3 47 700 2500 +60 B82722A2301N001 B82722J2301N001 
0.5 56 600 2000 +40 B82722A2501N020 B82722J2501N020 
0.5 47 550 1500 +60 B82722A2501N022 B82722J2501N022 
0.5 39 400 1120 +60 B82722A2501N021 B82722J2501N021 
0.5 27 350 1200 +60 B82722A2501N001 B82722J2501N001 
0.8 27 270 600 +60 B82722A2801N020 B82722J2801N020 
1.0 15 170 540 +60 B82722A2102N020 B82722J2102N020 
1.0 10 150 480 +60 B82722A2102N001 B82722J2102N001 
1.5 10 90 240 +60 B82722A2152N020 B82722J2152N020 
1.3 6.8 90 230 +60 B82722A2132N001 B82722J2132N001 
1.7 4.0 45 175 +60 B82722A2172N001 B82722J2172N001 
2.0 4.2 45 130 +40 B82722A2202N020 B82722J2202N020 
2.0 3.3 35 133 +60 B82722A2202N002 B82722J2202N002 
2.0 2.2 30 130 +60 B82722A2202N001 B82722J2202N001 
2.5 1.7 20 80 +60 B82722A2252N001 B82722J2252N001 
3.0 1.2 17 56 +60 B82722A2302N001 B82722J2302N001 
B82722A/JPower line chokes
Current-compensated ring core double chokes
610/16
Please read Cautions and warnings and
Important notes at the end of this document.
Impedance |Z| versus frequency f
measured with windings in parallel at +20 °C,
typical values
Impedance |Z| versus frequency f
measured with windings in parallel at +20 °C,
typical values
Impedance |Z| versus frequency f
measured with windings in parallel at +20 °C,
typical values
Current derating Iop/IR
versus temperature TA
B82722A/JPower line chokes
Current-compensated ring core double chokes
710/16
Cautions and warnings
Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
Particular attention should be paid to the derating curves given there.
The soldering conditions should also be observed. Temperatu res quoted in relation to wave
soldering refer to the pin, not the housing.
If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
The following points must be observed if the components are potted in customer applications:
Many potting materials shrink as they harden. They therefore exert a pressur e on the plastic
housing or core. This pressure can have a deleterious effect on electrical prope rties, and in
extreme cases can damage the core or plastic housing mechanically.
It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
The effect of the potting material can change the high-frequency behaviour of the components.
Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets,
data books, other publications and the website of EPCOS, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the
ordering codes are due to different processes employed and do not affect the
specifications of the respective products. Detailed information can be found on the Internet
under www.epcos.com/orderingcodes.
Please read Cautions and warnings and
Important notes at the end of this document.
810/16
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of an electronic component could endanger human life or health (e.g.
in accident prevention or life-saving systems), it must therefore be ensured by means of suitable
design of the customer application or other action taken by the customer (e.g. installation of
protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD,
MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT, SIFI,
SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other
countries. Further information will be found on the Internet at www.epcos.com/trademarks.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
EPCOS / TDK:
B82722J2102N1 B82722J2202N1 B82722J2301N1 B82722J2302N1 B82722J2501N1 B82722A2102N1
B82722A2202N1 B82722A2301N1 B82722A2302N1 B82722A2501N1 B82722J2102N101 B82722A2152N020
B82722A2202N020 B82722A2252N001 B82722A2501N022 B82722A2801N020 B82722J2132N001
B82722J2202N002 B82722J2202N020 B82722J2501N020 B82722J2801N020 B82722J2152N20 B82722A2132N1
B82722J2252N1 B82722J2501N21 B82722A2801N001 B82722J2202N001 B82722J2501N001 B82722J2302N001
B82722J2102N001 B82722J2252N001 B82722J2152N020 B82722A2301N001 B82722A2501N001
B82722A2132N001 B82722J2501N021 B82722J2301N001 B82722A2102N020 B82722J2301N002
B82722A2202N002 B82722A2172N001 B82722J2501N022 B82722A2501N020 B82722A2301N002
B82722J2102N020 B82722A2501N021