Power TOPLED with Lens Enhanced Thin Film LED Lead (Pb) Free Product - RoHS Compliant LS E63F, LA E63F, LY E63F Released This data sheet is under PCN-revision (see separate data sheet with respect to OS-PCN-2010-033-A). Not to be used for design-in. Features * package: white P-LCC-4 package, colorless clear resin * feature of the device: focussed radiation in SMT technology; high brightness in beam direction * wavelength: 633 nm (super-red), 617 nm (amber), 590 nm (yellow) * viewing angle: 30 * technology: InGaAlP * optical efficiency: 40 lm/W (super-red), 72 lm/W (amber), 46 lm/W (yellow) * grouping parameter: partial flux, forward voltage, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 12 mm tape with 2000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D * Superior Corrosion Robustness: Besondere Merkmale * Gehausetyp: weies P-LCC-4 Gehause, farbloser klarer Verguss * Besonderheit des Bauteils: fokussierte Abstrahlung in SMT-Technologie; hohe Helligkeit in Achsrichtung * Wellenlange: 633 nm (super-red), 617 nm (amber), 590 nm (gelb) * Abstrahlwinkel: 30 * Technologie: InGaAlP * optischer Wirkungsgrad: 40 lm/W (super-red), 72 lm/W (amber), 46 lm/W (gelb) * Gruppierungsparameter: Lichtfluss, Durchflussspannung, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 12 mm Gurt mit 2000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D * Erweiterte Korrosionsfestigkeit: Details siehe Seite 10 details see page 10 Anwendungen * Ampelanwendung * Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung) * Innen- und Auenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung und Bremslichter) * Ersatz von Kleinst-Gluhlampen * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Signal- und Symbolleuchten 2010-07-07 Applications * traffic lights * backlighting (LCD, switches, keys, displays, illuminated advertising) * interior and exterior automotive lighting (e.g. dashboard backlighting and brake lights) * substitution of micro incandescent lamps * marker lights (e.g. steps, exit ways, etc.) * signal and symbol luminaire 1 LS E63F, LA E63F, LY E63F Bestellinformation Ordering Information Lichtstrom2) Seite 16 Typ Emissionsfarbe Partieller Lichtfluss1) Seite 16 Type Color of Emission Partial Flux1) page 16 Luminous Flux2) page 16 IF = 50 mA EV (lux) LS E63F-DBFA-1-1 super-red Bestellnummer Ordering Code IF = 50 mA V (mlm) 5600 ...14000 3750 (typ.) Q65110A4105 LA E63F-EAFA-24-3B5A amber LA E63F-EBGA-24-3A4B 7100 ...14000 9000 ...22400 4200 (typ.) 6000 (typ.) Q65110A1845 Q65110A4103 LY E63F-DBEB-35-1 LY E63F-EAFA-46-1 5600 ...11200 7100 ...14000 3350 (typ.) 4200 (typ.) Q65110A4108 Q65110A4107 yellow Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LA E63F-EAFA-24-3B5A bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen EA, EB oder FA enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LA E63F-EAFA-24-3B5A bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -2, -3, oder -4 enthalten ist (siehe Seite 5 fur nahere Information). Z.B.: LS E63F-DAEA-1-1 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Gleiches gilt fur die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Durchlassspannungsgruppe geliefert. Z.B.: LA E63F-EAFA-24-3B5A bedeutet, dass nach Durchlassspannung gruppiert wird. Auf einem Gurt ist nur eine der Durchlasspannungsgruppen -3B, -4A, -4B oder -5A enthalten (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Durchlassspannungsgruppen nicht direkt bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LA E63F-EAFA-24-3B5A means that only one group EA, EB or FA will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LA E63F-EAFA-24-3B5A means that only 1 wavelength group -2, -3, or -4 will be shippable (see page 5 for explanation). E.g. LS E63F-DAEA-1-1 means that the device will be shiped within the specified limits as stated on page 4. In order to ensure availability, single wavelength groups will not be orderable. In a similar manner for LED, where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any one reel. E.g. LA E63F-EAFA-24-3B5A means that only 1 forward voltage group -3B, -4A, 4B or -5A will be shippable. In order to ensure availability, single forward voltage groups will not be orderable (see page 5 for explanation). 2010-07-07 2 LS E63F, LA E63F, LY E63F Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj + 125 C Durchlassstrom Forward current (TA=25C) IF 70 mA Stostrom Surge current t 10 s, D = 0.1, TA=25C IFM 100 mA Sperrspannung3) Seite 16 Reverse voltage3) page 16 (TA=25C) VR 12 V Leistungsaufnahme Power consumption (TA=25C) Ptot 190 mW Rth JA 300 K/W Rth JS 130 K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 16 Junction/ambient4) page 16 Sperrschicht/Lotpad Junction/soldering point 2010-07-07 3 LS E63F, LA E63F, LY E63F Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 50 mA Symbol Symbol (typ.) Dominantwellenlange5) Seite 16 Dominant wavelength5) page 16 IF = 50 mA Werte Values Einheit Unit LS LA LY peak 645 624 597 nm dom 633 6 617* 590* nm -5/+7 -7/+5 Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 50 mA (typ.) 16 18 18 nm Abstrahlwinkel bei 50 % EV (Vollwinkel) Viewing angle at 50 % EV (typ.) 2 30 30 30 Grad deg. Durchlassspannung6) Seite 16 Forward voltage6) page 16 IF = 50 mA (min.) (typ.) (max.) VF VF VF 1.90* 2.15 2.50 1.90* 2.15 2.65 2.05* 2.15 2.65 V V V Sperrstrom Reverse current VR = 12 V (typ.) (max.) IR IR 0.2 10 0.2 10 0.2 10 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF = 50 mA; -10C T 100C (typ.) TCpeak 0.15 0.14 0.12 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 50 mA; -10C T 100C (typ.) TCdom 0.05 0.08 0.10 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 50 mA; -10C T 100C (typ.) TCV -2.5 -2.5 -2.5 mV/K Optischer Wirkungsgrad Optical efficiency IF = 50 mA (typ.) opt 40 72 46 lm/W * Einzelgruppen siehe Seite 5 Individual groups on page 5 2010-07-07 4 LS E63F, LA E63F, LY E63F Wellenlangengruppen (Dominantwellenlange)5) Seite 16 Wavelength Groups (Dominant Wavelength)5) page 16 Gruppe Group amber yellow min. max. 2 612 616 3 616 4 620 Einheit Unit min. max. 620 583 586 nm 624 586 589 nm 5 589 592 nm 6 592 595 nm nm Durchlassspannungsgruppen6) Seite 16 Forward Voltage Groups6) page 16 Gruppe Group super-red amber min. max. min. max. 3A 1.90 2.05 1.90 2.05 3B 2.05 2.20 2.05 4A 2.20 2.35 2.20 4B 2.35 2.50 5A yellow Einheit Unit min. max. 2.20 2.05 2.20 V 2.35 2.20 2.35 V 2.35 2.50 2.35 2.50 V 2.50 2.65 2.50 2.65 V Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group DA DB EA EB FA FB GA Anm.: Note: Partieller Lichtfluss1) Seite 16 Partial Flux1) Seite 16 EV [lux] 4500 ... 5600 ... 7100 ... 9000 ... 11200 ... 14000 ... 18000 ... Lichtstarke2) Seite 16 Luminous Intensity2) page 16 IV (mcd) 5600 7100 9000 11200 14000 18000 22400 4200 (typ.) 5300 (typ.) 6700 (typ.) 8500 (typ.) 10600 (typ.) 13400 (typ.) 16900 (typ.) Lichtstrom2) Seite 16 Luminous Flux2) page 16 V (mlm) 2100 2700 3400 4200 5300 6700 8500 (typ.) (typ.) (typ.) (typ.) (typ.) (typ.) (typ.) Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus 3 bzw. 4 Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. The standard shipping format for serial types includes a family group of 3 or 4 individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: EB-3-4A / Example: EB-3-4A Helligkeitsgruppe Brightness Group Wellenlange Wavelength Durchlassspannung Forward Voltage EB 3 4A Anm.: Note: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. No packing unit / tape ever contains more than one group for each selection. 2010-07-07 5 LS E63F, LA E63F, LY E63F Prinzipieller Messaufbau fur Partial Flux Messung Schematic test method for partial flux measurement Referenzebene des Detektors (o14 mm) Reference layer of detector (o14 mm) d = 40 OHAY0907 2010-07-07 6 LS E63F, LA E63F, LY E63F Relative spektrale Emission2) Seite 16 Relative Spectral Emission2) page 16 V() = spektrale Augenempfindlichkeit / Standard eye response curve Erel = f (); TA = 25 C; IF = 50 mA OHL22732 100 E rel % 80 V 60 40 yellow amber super-red 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik2) Seite 16 Radiation Characteristic2) page 16 Irel = f (); TA = 25 C 40 30 20 10 50 OHL00021 0 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2010-07-07 0.8 0.6 0.4 0 20 7 40 60 80 100 120 LS E63F, LA E63F, LY E63F Durchlassstrom2) Seite 15 Forward Current2) page 15 IF = f (VF); TA = 25 C IF Relative Lichtstarke2) 7) Seite 15 Relative Luminous Intensity2) 7) page 15 EV/EV(50 mA) = f (IF); TA = 25 C OHL02710 10 2 mA OHL22669 10 1 EV E V (50 mA) 10 0 yellow amber super red 10 1 5 10 -1 5 10 0 1.5 1.7 1.9 2.1 10 -2 0 10 2.3 V 2.5 5 10 1 VF IF Relative Vorwartsspannung2) Seite 15 Relative Forward Voltage2) page 15 VF = VF - VF(25 C) = f (Tj); IF = 50 mA 0.25 V mA 10 2 Relative Lichtstarke2) Seite 15 Relative Luminous Intensity2) page 15 EV/EV(25 C) = f (Tj); IF = 50 mA OHL02667 OHL22711 2.5 EV E V (25 C) VF 2.0 0.15 yellow 0.1 1.5 0.05 0 1.0 super red amber -0.05 -0.1 0.5 -0.15 -0.2 -60 -40 -20 0 0 -60 -40 -20 0 20 40 60 C 100 Tj 2010-07-07 20 40 60 C 100 Tj 8 LS E63F, LA E63F, LY E63F Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (T) OHL01413 80 mA IF 70 60 TA TS 50 40 30 20 A temp. ambient S temp. solder point 10 0 0 20 40 60 80 C 100 T Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C OHL02046 0.12 D= IF A D= IF A 0.005 0.01 0.02 0.05 0.10 OHL02045 0.12 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.10 0.08 0.08 D= 0.06 0.04 0.02 0.06 0.1 0.2 0.5 1 tP D= T 0.04 tP 0.02 IF T D= T tP IF T 0 10-5 10-4 10-3 10-2 10-1 100 101 s 102 0 10-5 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2010-07-07 tP 9 LS E63F, LA E63F, LY E63F Mazeichnung8) Seite 16 Package Outlines8) page 16 3.0 (0.118) 3.8 (0.150) max. 2.6 (0.102) 2.3 (0.091) 2.1 (0.083) 1.7 (0.067) 2.1 (0.083) 0.9 (0.035) 0.8 (0.031) 0.6 (0.024) 0.7 (0.028) 1.1 (0.043) C Package marking A A A C o2.55 (0.100) o2.60 (0.102) 0.1 (0.004) typ 0.6 (0.024) 0.4 (0.016) 0.18 (0.007) 0.5 (0.020) 3.7 (0.146) 3.3 (0.130) 3.4 (0.134) 3.0 (0.118) A 41 A (2.4) (0.095) A 0.13 (0.005) GPLY6113 Korrosionsfestigkeit besser als EN 60068-2-60 (method 4): mit erweitertem Korrosionstest: 40C / 90%rh / 15ppm H2S / 336h Corrosion robustness better than EN 60068-2-60 (method 4): with enhanced corrosion test: 40C / 90%rh / 15ppm H2S / 336h Gehausekennung: Package mark: Gewicht / Approx. weight: abgeschragte Ecke bevelled edge 38 mg Gurtung / Polaritat und Lage8) Seite 16 Method of Taping / Polarity and Orientation8) page 16 Verpackungseinheit 2000/Rolle, o330 mm Packing unit 2000/reel, o330 mm 3.65 (0.144) 4 (0.157) 1.5 (0.059) 2 (0.079) 2 (0.079) 1.5 (0.059) 1.5 (0.059) 8 (0.315) 2010-07-07 10 5 12 (0.472) 1.75 (0.069) 5.5 (0.217) 2.9 (0.114) 3.45 (0.136) C A A A 0.4 (0.016) OHAY0736 LS E63F, LA E63F, LY E63F Empfohlenes Lotpaddesign verwendbar fur TOPLED und Power TOPLED Reflow Loten8) Seite 16 Recommended Solder Pad useable for TOPLED and Power TOPLED Reflow Soldering8) page 16 Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Padgeometrie fur verbesserte Warmeableitung 3.3 (0.130) Paddesign for improved heat dissipation 3.3 (0.130) Anode 2.3 (0.091) 11.1 (0.437) 1.5 (0.059) 1.1 (0.043) 3.7 (0.146) 0.8 (0.031) 0.7 (0.028) Kathode/ Cathode Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Cu Flache / <_ 16 mm 2 per pad Cu-area Lotstoplack Solder resist Empfohlenes Lotpaddesign8) Seite 16 Recommended Solder Pad8) page 16 OHLPY440 Wellenloten (TTW) TTW Soldering Anode Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. 2 (0.079) 6.1 (0.240) Bewegungsrichtung der Platine PCB-direction 1 (0.039) 2 (0.079) 2 (0.079) 3 (0.118) 6 (0.236) 2.8 (0.110) 2.8 (0.110) Padgeometrie fur verbesserte Warmeableitung 0.5 (0.020) Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Paddesign for improved heat dissipation Kathode/ Cathode Cu Flache / > 16 mm 2 per pad Cu-area Lotstoplack Solder resist OHAY1583 2010-07-07 11 LS E63F, LA E63F, LY E63F Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering (nach J-STD-020C) (acc. to J-STD-020C) will be updated according to OS-PCN-2010-033-A Wellenloten (TTW) Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2010-07-07 12 s 250 LS E63F, LA E63F, LY E63F Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: Sa m pl e Semiconductors RoHS Compliant ML Temp ST 2 260 C RT (6P) BATCH NO: Batch Number Bar Code (1T) LOT NO: Lot Number Additional TEXT (9D) D/C: Date Code R077 Bar Code (X) PROD NO: Product Code DEMY PACKVAR: Packing Type (Q)QTY: Product Quantity per Reel (G) GROUP: X - X - X Bar Code Forward Voltage Group Wavelength Group Brightness Group OHA12043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm Leader: 400 mm Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 12 + 0.3 - 0.1 4 0.1 8 0.1 2 0.05 1.5 + 0.1 1.75 0.1 5.5 0.05 (0.157 0.004) (0.315 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.217 0.002) Reel dimensions in mm (inch) A 330 (13) 2010-07-07 W Nmin W1 W2 max 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 13 LS E63F, LA E63F, LY E63F Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print L VE LE Barcode label l see labe k, If code blan bar ). (RH . RH idity hum 0% e tive d C/6 kag rela are 30 s _ < infr pac IVE RS of TO rs 90% to ak tain SIT rs < ns ed (pe UC e). or rs con Hou SEN rs Hou ND and ject ditio cod C, 72 sing Hou e 5 bag E 48 C sub Hou con s UR ICO ces 24 6 dat 40 be time C ory ThiISTSEM pro < time . or 23 time at t will l with or fact entC) . MO Flo time s TO at or at Flo l tica d tha or ival ure nth OP Flo 4 if: rea w Flo labe mo ices iden 5 ced equ el n e 5a is el ing, belo or 24 pro 6 Lev e dev : el e cod , unt whe Lev el re ow, see bag Lev l dat re mo bak bar ned Lev refl istu 10% re led time sea for istu ore> re ope e Mo see istu k, is or . sea is has k, Mo bef istu d 033 Mo in Flo RH blan Mo or-p blan in bag Car ing, r TDlife (if If with t. r lf 10%bak or J-S thisvapp. Yea _ eks rs < r ed icat med, C 1 Yea tem She ow, at uire not > y 1 WeHou DE unt Afte Ind 4 uire refl is red req 2. bod Mo /JE time 168 req : 2b a) Sto ices idity time or is IPC or time b) ned Flo or Hum ing ce time or Dev 2a e Flo a) ope or 3. b) bakren Flo 1 l dat Flo If 2 refe time el 2a 4. el sea 3 Lev el and Lev el re Bag e Lev re Lev istu Dat re istu re Mo istu Mo istu Mo Mo N O TI U A C 1. M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OSR Desiccant OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials 8 Q- 1 R1 lti LS TO Y T6 PL 76 1+ P- Mu rs D/C : 01 O pt o to uc nd 00 (9D ) 4 co 20 23 (1T ) 5 14 2 110 0 (Q) QT Y: BA TC H H1 NO : 998 3G O SR mi AM 021 LO T (6P ) Se 210 44 ). NO : 12 see labe N NO : TIO PR OD U (X) A (G) l k, C GR OU P: Muster L VE LE code (RH blan If y bar . idit RH hum 60% e tive d C/ kag rela are 30 E S s _ < infr pac OR of tainITIV 90% to ak urs CT < e). or urs ted (pe ons con NS Ho g urs SE DU Ho and jec diti cod C, 72 sin Ho urs e 5 bag E ON 48 C sub e Ho con ces is UR 24 6 dat e MIC 40 be tim h C e ThISTSE pro < tory tim . or t wit 23 tim e at t will C) or fac MO . Flo al len tim TO s at or at Flo d or iva ure el nth s tha OP ntic Flo 4 if: rea Flo , lab ow mo ice equ ide 5 ced el e 5a is el ingen bel or 24 pro 6 Lev e dev, : el cod e , unt wh Lev el re ow see bag Lev l dat re mo bak e bar ned Lev refl istu 10% re tim sea for istu ore> re Mo see 3 istu is or . sea is Mo nk, bef istu pha nk, Flo , rd -03 Mo in RH bla Mo orbag bla hin ingCa TD life (if ar If wit t. vapp. 10%baktor J-S this elf Ye ar eks , _ < ed ica med, C 1 urs Ye erow tem Sh at uire not > y 1 WeHo unt DE Aft Ind 1. e 4 uire refl red req 2. bod Mo e ity is /JE tim 168 req : e 2b a) Sto es tim or mid is e IPC or tim vic b) ned Flo or Hu tim ing ce or De e 2a Flo a) ope or 3. b) bakren Flo e 1 l dat Flo If 2 el refe tim 2a 4. el sea 3 Lev g el and Lev el re Ba te Lev re Lev istu Da re istu re Mo istu Mo istu Mo Mo DE MY (G) GR OU P: P- 1+ Q- 1 R1 lti LS TO Y T6 PL 76 AM 99 8 D/C : 01 21 00 (9D ) 00 SR 21 : 4 20 23 O (6P ) (X) PR OD O NO : (1T ) 11 00 LO T 14 2 5 NO : 12 3G BA TC H H1 (Q) QT Y: Se SR m A ico M nd O uc pt to o rs NO 44 Mu 8 ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Te 2a 220 mp 3 240 ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: ope se Muster led DE MY Barcode label ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Tem 2a 220 3 240 p ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: Barcode label Packing Sealing label OHA02044 Dimensions of transportation box in mm (inch) Breite / Width 352 5 (13,858 0,1968) 2010-07-07 Lange / length Hohe / height 352 5 (13,858 0,1968) 33 5 (1,3 0,1968) 14 LS E63F, LA E63F, LY E63F Revision History: 2010-07-07 Previous Version: 2010-06-22 Page Subjects (major changes since last revision) Date of change 1; 4 Dominant wavelength, typical Value for yellow 2005-11-02 2; 5 Brightness Group Correlation 2006-05-29 15 laser warning removed; new classification regarding CIE S009/E:2002 ("photobiological safety of lamps and lamp systems")IEC 62471 (1st edition 2006-07). 2008-09-04 12 OS-IN-2009-035 2009-12-16 1, 10 Additional information 2010-02-25 12 soldering profile will be revised 2010-03-30 all Datasheet released 2010-06-22 12 see OS-PCN-2010-033 2010-07-07 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components9) page 16 may only be used in life-support devices or systems10) page 16 with the express written approval of OSRAM OS 2010-07-07 15 LS E63F, LA E63F, LY E63F Funoten: Remarks: 1) 1) Brightness values are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 8 % and an expanded uncertainty of +/- 11 % (acc. to GUM with a coverage factor of k = 3). 2) Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line.If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 16 mm 2 per pad) The dominant wavelength is measured at a current pulse of typical 25 ms, with an internal reproducibility of +/- 0,5 nm and an expanded uncertainty of +/- 1 nm (acc. to GUM with a coverage factor of k=3). The forward voltage is measured during a current pulse of typical 8 ms, with an internal reproducibility of +/0,05 V and an expanded uncertainty of +/- 0,1 V (acc. to GUM with a coverage factor of k=3). 2) 3) 4) 5) 6) 7) 8) 9) 10) Helligkeitswerte werden wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 8 % und einer erweiterten Messunsicherheit von +/- 11 % gemessen (gema GUM mit Erweiterungsfaktor k = 3). Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen.Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. Die LED kann kurzzeitig in Sperrichtung betrieben werden. RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 16 mm 2 je Pad) Die dominante Wellenlange wird wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 0,5 nm und einer erweiterten Messunsicherheit von +/- 1 nm gemessen (gema GUM mit Erweiterungsfaktor k = 3). Vorwartsspannungen werden wahrend eines Strompulses einer typischen Dauer von 8 ms, mit einer internen Reproduzierbarkeit von +/- 0,05 V und einer erweiterten Messunsicherheit von +/- 0,1 V gemessen (gema GUM mit Erweiterungsfaktor k=3). Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Dimmverhaltnis im Gleichstrom-Betrieb max. 5:1 Mae werden wie folgt angegeben: mm (inch) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 3) 4) 5) 6) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimming range for direct current mode max. 5:1 8) Dimensions are specified as follows: mm (inch) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 9) 10) Published by OSRAM Opto Semiconductors GmbH Leibnizstrasse 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2010-07-07 7) 16 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.