V11-T3-8 Volume 11—Vehicle and Commercial Controls CA08100013E—
March 2011
www.eaton.com
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.2
Pushbuttons
Illuminated AC/DC Rated
Illuminated AC/DC Rated Contents
Description Page
Illuminated AC/DC Rated
Catalog Number Selection . . . . . . . . . . . . . . . . V11-T3-9
Lamp Selection . . . . . . . . . . . . . . . . . . . . . . . . V11-T3-14
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . V11-T3-16
Technical Data and Specifications . . . . . . . . . . V11-T3-17
Terminal Identification . . . . . . . . . . . . . . . . . . . V11-T3-18
Circuit Diagrams . . . . . . . . . . . . . . . . . . . . . . . . V11-T3-18
Legends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V11-T3-18
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . V11-T3-19
Product Description
Eaton offers a wide range of
pushbutton switches for
standard industry applications
such as appliances,
electronics, medical and test
instrumentation, office
equipment and many other
commercial applications.
A variety of options are
available such as illuminated
and non-illuminated versions,
colored lens caps, lamp
styles and mounting styles.
Each pushbutton series
offers a matching indicator
for a consistent look. See the
Product Overview tables to
quickly identify the required
product. Then, refer to the
Catalog Number Selection
and Product Selection tables
to determine the catalog
number.
Standards and
Certifications
●UL Recognized
●CSA Certified
●RoHS
Notes
Except where noted.
Visit www.eaton.com/vcbu for
the most up-to-date list of verified
part numbers.
Product Selection Guide
General Purpose Pushbuttons and Indicators—Illuminated and Non-Illuminated
Series 206/208 Page 220/221/224 Page 231/234 Page 580/581/586 Page
Pushbutton
Selection—Switch
V11-T3-9 V11-T3-9 V11-T3-9 V11-T3-10
Pushbutton
Selection—Indicator
V11-T3-9 V11-T3-9 V11-T3-9 V11-T3-10
Pushbutton Cap
Selection
V11-T3-13 V11-T3-13 V11-T3-13 V11-T3-13
Circuit Diagram Letter
(See Page V11-T3-18)
K, N K, N K, N J, L, M
Series 770/775 Page 810/815 Page 820/825 Page 860/861/845 Page
Pushbutton
Selection—Switch
V11-T3-11 V11-T3-12 V11-T3-12 V11-T3-12
Pushbutton Cap
Selection
V11-T3-11 V11-T3-12 V11-T3-12 V11-T3-12
Pushbutton
Selection—Indicator
V11-T3-13 V11-T3-13 V11-T3-13 V11-T3-13
Circuit Diagram Letter
(See Page V11-T3-18)
Q K, N K, N J, L
Volume 11—Vehicle and Commercial Controls CA08100013E—
March 2011
www.eaton.com V11-T3-9
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.2
Pushbuttons
Illuminated AC/DC Rated
Series 206/208, 220 and 221/224, 231/234
Catalog Number Selection
How To Order—Series 206/220 and 221 /231 , Switch
How To Order—Series 208/224 /234 , Indicator
Notes
Full cap style does not require a bottom lens code.
Pole one is silver, pole two is gold.
Refer to Page V11-T3-16 for barrier information.
Not available with lighted display.
Use two-digit item number, 30–37, from Incandescent Lamps table on Page V11-T3-14.
Use two-digit item number, 01–19, from LED Lamps table on Page V11-T3-15.
Accepts two bulbs
To determine complete catalog number, start with the appropriate control type and add the appropriate code letters and/or numbers.
2 0 6 K 1 1 9 1 2 D 0 3 0 5 S 3 0
Base Prefix
206 =206 Series
illuminated
220 = 220 Series
non-illuminated
221 = 221 Series
illuminated
231 = LED display
Product Type
K = Switch
Action
1 = Mom.
2 = Alt.
Terminations
1 = Solder
Full/Top
Lens Color
Bottom
Lens Color
All Series 206 Series Only
00 = Orange
01 = White
02 = Red
03 = Green
04 = Yellow
05 = Blue
10 = Amber
12 = Lunar white
13 = Light green
15 = Clear
20 = Gray
21 = Black
00 = Orange
01 = White
02 = Red
03 = Green
04 = Yellow
05 = Blue
10 = Amber
12 = Lunar white
13 = Light green
15 = Clear
20 = Gray
21 = Black
Pushbutton Height
206
A = 0.190 in (4.8 mm)
full
S = 0.190 in (4.8 mm)
split
220 and 221/231
A = 0.190 in (4.8 mm)
full
Lamp
206 /220 and 221
Incandescent
Example:
30 28-3158
231
LED lamps
Example:
02 Red, 5 Vdc
Example:
Number of
Poles
1 = 1PST
2 = 2PDT
Mounting
0 = No barriers
1 = Vert. barriers
2 = Horiz. barriers
3 = Full barriers
Contact
Material
8 = Silver
9 = Gold
6 = 2PDT
Pushbutton Style
220 and 221
C = Clear
D = Deadfront
F = Filtered
M = Matte
231
M = Matte
To determine complete catalog number, start with the appropriate control type and add the appropriate code letters and/or numbers.
2 0 8 L 1 2 D 0 3 0 5 S 3 0
Base Prefix
208 =208 Series
indicators
224 = 224 Series
indicators
234 = 234 Series
indicators
Product Type
L = Indicator
Terminations
1 = Solder
Full/Top
Lens Color
Bottom
Lens Color
All Series 208 Series Only
00 = Orange
01 = White
02 = Red
03 = Green
04 = Yellow
05 = Blue
10 = Amber
12 = Lunar white
13 = Light green
15 = Clear
20 = Gray
21 = Black
00 = Orange
01 = White
02 = Red
03 = Green
04 = Yellow
05 = Blue
10 = Amber
12 = Lunar white
13 = Light green
15 = Clear
20 = Gray
21 = Black
Pushbutton Height
208
A = 0.190 in (4.8 mm)
full
S = 0.190 in (4.8 mm)
split
224/234
A = 0.190 in (4.8 mm)
full
Lamp
208/224
Incandescent
Example:
30 28-3158
234
LED lamps
Example:
02 Red, 5 Vdc
Example:
Mounting
0 = No barriers
1 = Vert. barriers
2 = Horiz. barriers
3 = Full barriers
Pushbutton Style
208/224
C = Clear
D = Deadfront
F = Filtered
M = Matte
234
M = Matte
V11-T3-10 Volume 11—Vehicle and Commercial Controls CA08100013E—
March 2011
www.eaton.com
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.2
Pushbuttons
Illuminated AC/DC Rated
Series 580/581/586
Catalog Number Selection
How To Order—Series 580/581, Switch
How To Order—Series 586, Indicator
Notes
Flush with bezel.
Not available with lighted display.
Use two-digit item number, 30–37, from Incandescent Lamps table on Page V11-T3-14.
To determine complete catalog number, start with the appropriate control type and add the appropriate code letters and/or numbers.
5 8 1 K 1 3 9 1 0 T 0 3 B 3 0
Base Prefix
580 = 580 Series
non-illuminated
581 = 581 Series
illuminated
Product Type
K = Switch
Action
1 = Mom.
2 = Alt.
Terminations
1 = Solder
Full/Top
Lens Color
00 = Orange
01 = White
02 = Red
03 = Green
04 = Yellow
05 = Blue
12 = Lunar white
15 = Clear
20 = Gray
21 = Black
Pushbutton
Height
A = 0.270 in
(6.9 mm)
B = 0.330 in
(8.4 mm)
C = 0.440 in
(11.2 mm)
Lamp
Incandescent
Example:
30 28-3158
Example:
Number of Poles
1 = 1PST NO
2 = 1PST NC
3 = 2PST NO
4 = 2PST NC
5 = 2PST NO/NC
Mounting
0 = Chamfered bezel
1 = Flat bezel
Contact Material
5 = Silver plate
9 = Gold plate
Pushbutton Style
M = Matte
T = Translucent
Pushbutton Style
M = Matte
T = Translucent
To determine complete catalog number, start with the appropriate control type and add the appropriate code letters and/or numbers.
5 8 6 L 1 0 T 0 3 B 3 0
Base Prefix
586 =586 Series
indicators
Product Type
L = Indicator
Terminations
1 = Solder
Full/Top
Lens Color
00 = Orange
01 = White
02 = Red
03 = Green
04 = Yellow
05 = Blue
12 = Lunar white
15 = Clear
20 = Gray
21 = Black
Pushbutton
Height
A = 0.270 in
(6.9 mm)
B = 0.330 in
(8.4 mm)
C = 0.440 in
(11.2 mm)
Lamp
Incandescent
Example:
30 28-3158
Example:
Mounting
0 = Chamfered bezel
1 = Flat bezel
Volume 11—Vehicle and Commercial Controls CA08100013E—
March 2011
www.eaton.com V11-T3-11
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.2
Pushbuttons
Illuminated AC/DC Rated
Series 770/775
Catalog Number Selection
How To Order—Series 770 , Switch
How To Order—Series 775 , Indicator
Notes
Full or split cap style available.
Flush with bezel.
Not available with lighted display.
Use two-digit item number, 51–59, from Incandescent Lamps table on Page V11-T3-14.
Use two-digit item number, 80 or 81, from Neon Lamps table on Page V11-T3-15.
To determine complete catalog number, start with the appropriate control type and add the appropriate code letters and/or numbers.
7 7 0 K 1 1 9 1 1 M 0 3 0 1 G 8 0
Base Prefix
770 = 770 Series
illuminated
Product Type
K = Switch
Action
1 = Mom.
2 = Alt.
Terminations
1 = Solder
Full/Top
Lens Color
00 = Orange
01 = White
02 = Red
03 = Green
04 = Yellow
05 = Blue
Bottom
Lens Color
00 = Orange
01 = White
02 = Red
03 = Green
04 = Yellow
05 = Blue
Pushbutton Height
F = 0.36 in (9.1 mm)
full
G = 0.27 in (6.9 mm)
full
H = 0.12 in (3.0 mm)
full
S = 0.36 in (9.1 mm)
split
Lamp
Incandescent
Neon
Example:
80 28-3157
Example:
Number of
Poles
1 = 1PDT
2 = 2PDT
Mounting
0 = No barriers
1 = Vert. barriers
Contact
Material
8 = Silver
9 = Gold
Pushbutton Style
M = Matte
Lamp
Incandescent
Neon
Example:
80 28-3157
To determine complete catalog number, start with the appropriate control type and add the appropriate code letters and/or numbers.
7 7 5 L 1 1 M 0 3 0 1 G 8 0
Terminations
1 = Solder
Pushbutton Height
F = 0.36 in (9.1 mm)
full
G = 0.27 in (6.9 mm)
full
H = 0.12 in (3.0 mm)
full
S = 0.36 in (9.1 mm)
split
Example:
Mounting
0 = No barriers
1 = Vert. barriers
Pushbutton Style
M = Matte
Full/Top
Lens Color
00 = Orange
01 = White
02 = Red
03 = Green
04 = Yellow
05 = Blue
Bottom
Lens Color
00 = Orange
01 = White
02 = Red
03 = Green
04 = Yellow
05 = Blue
Base Prefix
775 = 775 Series
indicator
Product Type
L = Indicator
V11-T3-12 Volume 11—Vehicle and Commercial Controls CA08100013E—
March 2011
www.eaton.com
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.2
Pushbuttons
Illuminated AC/DC Rated
Series 860 and 861/845, 810/815, 820/825
Catalog Number Selection
How To Order—Series 860 and 861/810/820, Switch
How To Order—Series 845/815/825, Indicator
Notes
Full cap style does not require a bottom lens code.
Pole one is silver, pole two is gold.
Flush with bezel.
Not available with lighted display.
Use two-digit item number, 02–14, from Incandescent Lamps table on Page V11-T3-14.
Use two-digit item number, 93–97, from LED Lamps table on Page V11-T3-15.
Not available with lighted display. Available only on “M.”
Use two-digit item number, 70, from Neon Lamps table on Page V11-T3-15.
To determine complete catalog number, start with the appropriate control type and add the appropriate code letters and/or numbers.
8 6 1 K 1 3 9 1 2 D 0 3 B 0 2
Base Prefix
860 = 860 Series
non-illuminated
861 =861 Series
illuminated
810 = 810 Series
illuminated
820 = 820 Series
illuminated
Product Type
K = Switch
Terminations
1 = Solder
Full/Top Lens Color
00 = Orange
01 = White
02 = Red
03 = Green
04 = Yellow
05 = Blue
12 = Lunar white
15 = Clear
20 = Gray
21 = Black
Pushbutton Height
860 and 861
A = 0.24 in (6.1 mm)
B = 0.35 in (8.9 mm)
C = 0.14 in (3.6 mm)
810/820
A = 0.33 in (8.4 mm)
B = 0.44 in (11.2 mm)
Lamp
860 and 861
Incandescent
Example:
02 28-3154-2
810
Incandescent
LED
Example:
93 Red, 20 mA
820
Incandescent
Neon
LED
Example:
70 28-3156
Example:
Number of
Poles
860 and 861
1 = 1PDT
3 = 2PST
810
1 = 1PDT
2 = 2PDT
820
1 = 1PDT
2 = 2PDT NC
Mounting
860 and 861
0 = No barriers
1 = Vert. barriers
2 = Horiz. barriers
810/820
0 = No barriers
1 = Vert. barriers
Contact Material
8 = Silver
9 = Gold
6 = 2PDT/2PST
Pushbutton Style
C = Clear
D = Deadfront
F = Filtered
M = Matte
T = Translucent
Action
1 = Mom.
2 = Alt.
To determine complete catalog number, start with the appropriate control type and add the appropriate code letters and/or numbers.
8 4 5 L 1 2 D 0 3 B 3 0
Base Prefix
845 =861 Series
indicator
815 = 810 Series
indicator
825 = 820 Series
indicator
Product Type
L = Indicator
Terminations
1 = Solder
Full/Top
Lens Color
00 = Orange
01 = White
02 = Red
03 = Green
04 = Yellow
05 = Blue
12 = Lunar white
15 = Clear
20 = Gray
21 = Black
Example:
Mounting
845
0 = No barriers
1 = Vert. barriers
2 = Horiz. barriers
815/825
0 = No barriers
1 = Vert. barriers
Pushbutton Style
C = Clear
D = Deadfront
F = Filtered
M = Matte
T = Translucent
Pushbutton Height
845
A = 0.24 in (6.1 mm)
B = 0.35 in (8.9 mm)
C = 0.14 in (3.6 mm)
815/825
A = 0.33 in (8.4 mm)
B = 0.44 in (11.2 mm)
Lamp
815
Incandescent
LED
Example: 30 28-3158
825
Incandescent
LED
Neon
Example: 93 Red, 20 mA
845
Incandescent
Example: 37 28-3158-8
Volume 11—Vehicle and Commercial Controls CA08100013E—
March 2011
www.eaton.com V11-T3-13
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.2
Pushbuttons
Illuminated AC/DC Rated
Illuminated and Non-Illuminated Pushbutton Caps
Series 206/220/231 and Series 580/770/810/820/849
Catalog Number Selection
How To Order—Series 206/220/231, Pushbutton Caps
How To Order—Series 580/770/810/820/849, Pushbutton Caps
Notes
For a high degree of illumination, a full cap may be used with two lamp devices.
Available only with colors red, green, yellow and blue.
Available in matte only.
Not available for lighted display.
Measured from panel of top of pushbutton cap.
Available in translucent and matte only.
For two lamps, two colored inserts with divider.
To determine complete catalog number, start with the appropriate control type and add the appropriate code letters and/or numbers.
2 0 6 P C 0 3 0 4 S
Base Prefix
206 =2 lamp display
(Series 206/208)
220 = Non-illuminated
Series 220 and illuminated
Series 221, 224 and 234
231 = LED display on
Series 231 and 234
Product Type
P = Pushbutton
Display Legend/Style
C = Clear cap and color
insert, transmitted color
D = Deadfront, smoky gray
cap and color insert
F = Filtered color, white cap
and color insert
M = Matte, no insert,
transmitted color
Full/Top
Lens Color
00 = Orange
01 = White
02 = Red
03 = Green
04 = Yellow
05 = Blue
10 = Amber
12 = Lunar white
13 = Light green
15 = Clear
20 = Gray
21 = Black
Cap Height
A = 0.19 in (4.8 mm),
full
S = 0.19 in (4.8 mm),
split
Example:
Bottom
Lens Color
00 = Orange
01 = White
02 = Red
03 = Green
04 = Yellow
05 = Blue
10 = Amber
12 = Lunar white
13 = Light green
15 = Clear
20 = Gray
21 = Black
To determine complete catalog number, start with the appropriate control type and add the appropriate code letters and/or numbers.
5 8 0 P C 0 3 0 4 B
Base Prefix
580 =Series 580, 581, 586
770 = Series 770, 775
810 = Series 810, 815
820 = Series 820, 825
849 = Series 845, 860, 861
Product Type
P = Pushbutton
Display Legend/Style
C = Clear cap and color
insert, transmitted
color
D = Deadfront, smoky gray
cap and color insert
F = Filtered color, white
cap and color insert
M = Matte, no insert,
transmitted color
T = Transmitted color,
smooth surface,
solid color
Full/Top
Lens Color
00 = Orange
01 = White
02 = Red
03 = Green
04 = Yellow
05 = Blue
10 = Amber
12 = Lunar white
15 = Clear
21 = Black
Cap Height
580
A = 0.27 in (6.9 mm)
B = 0.33 in (8.4 mm)
C = 0.44 in (11.2 mm)
770
F = Full, 0.36 in (9.1 mm)
G = 0.27 in (6.9 mm)
H = 0.12 in (3.0 mm)
S = Split, 0.36 in (9.1 mm)
810/820
A = 0.33 in (8.4 mm)
B = 0.44 in (11.2 mm)
849
A = 0.24 in (6.1 mm)
B = 0.35 in (8.9 mm)
C = 0.14 in (3.6 mm)
Example:
Bottom
Lens Color
00 = Orange
01 = White
02 = Red
03 = Green
04 = Yellow
05 = Blue
10 = Amber
12 = Lunar white
15 = Clear
21 = Black
V11-T3-14 Volume 11—Vehicle and Commercial Controls CA08100013E—
March 2011
www.eaton.com
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.2
Pushbuttons
Illuminated AC/DC Rated
Lamp Selection
Incandescent Lamps
Bi-Pin Base for 800 Series
Midget Flange Base for 770 Series
Subminiature Wedge Base for 200 and 500 Series
Notes
Use this two-digit number for installation in switches and indicators.
Standard tolerance for MSCP is ±25%.
Average life is for AC operation. DC life will be approximately 50% less. Operating incandescent lamps at 5–10% below rated voltage will generally increase lamp life 200–400%.
Item Number
To Order Lamp
Separately ASA Lamp Number Designed Volts Design Amps Brightness (MSCP) Brightness (Lumens) Lab Average Life (Hours)
02 28-3154-2 7361 5 0.06 0.05 0.63 100,000
03 28-3154-3 7945 6 0.04 0.03 0.38 10,000
04 28-3154-4 7328 6 0.20 0.60 7.92 21,000
05 28-3154-5 7380 6.3 0.04 0.03 0.38 50,000
06 28-3154-6 7377 6.3 0.075 0.22 2.89 500
07 28-3154-7 7381 6.3 0.20 0.40 5.03 50,000
08 28-3154-8 7371 12 0.04 0.12 1.51 10,000
09 28-3154-9 7330 14 0.08 0.50 6.29 750
10 28-3154-10 7382 14 0.08 0.30 3.77 50,000
11 28-3154-11 7370 18 0.04 0.15 1.89 10,000
12 28-3154-12 7327 28 0.04 0.34 4.27 7,000
13 28-3154-13 7387 28 0.04 0.30 3.77 25,000
14 28-3154-14 7876 28 0.06 0.34 4.27 25,000
Item Number
To Order Lamp
Separately ASA Lamp Number Designed Volts Design Amps Brightness (MSCP) Brightness (Lumens) Lab Average Life (Hours)
51 28-3155-2 345 6 0.04 0.03 0.38 10,000
52 28-3155-3 328 6 0.20 0.60 7.92 1,000
53 28-3155-4 377 6.3 0.075 0.22 2.89 500
54 28-3155-5 394 12 0.04 0.12 1.51 10,000
55 28-3155-6 330 14 0.08 0.50 6.29 750
56 28-3155-7 382 14 0.08 0.30 3.77 50,000
57 28-3155-8 370 18 0.04 0.15 1.89 10,000
58 28-3155-9 327 28 0.04 0.34 4.27 7,000
59 28-3155-10 387 28 0.04 0.30 3.77 25,000
Item Number
To Order Lamp
Separately ASA Lamp Number Designed Volts Design Amps Brightness (MSCP) Brightness (Lumens) Lab Average Life (Hours)
30 28-3158 56 5 0.115 0.15 1.89 20,000
31 28-3158-2 79 6 0.20 0.60 7.92 1,000
32 28-3158-3 84 6.3 0.04 0.03 0.38 20,000
33 28-3158-4 86 6.3 0.20 0.40 5.03 20,000
34 28-3158-5 18 14 0.04 0.13 1.63 5,000
35 28-3158-6 73 14 0.08 0.30 3.77 15,000
36 28-3158-7 85 28 0.04 0.30 3.77 7,000
37 28-3158-8 17 28 0.06 0.65 8.17 5,000
Volume 11—Vehicle and Commercial Controls CA08100013E—
March 2011
www.eaton.com V11-T3-15
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.2
Pushbuttons
Illuminated AC/DC Rated
Neon Lamps
T 1-3/4 Bi-Pin Base Neon Lamp for All 800 Series “Shorty” Switches and Indicators
T 1-3/4 Midget Flange Base Neon Lamps for All 700 Series Switches and Indicators
LED Lamps
LEDs are sold installed only.
LEDs for Series 231 through 235 Switches and Indicators
T 1-3/4 Wire LEDs for All 800 Series Switches and Indicators
Notes
Neon lamps are not recommended for use with colored caps or inserts, especially those colored green or blue.
Recommended external series resistor values shown for indicated average useful life are for lamp and resistor
combinations used across 110–125 Vac, 1/4 W, ±10% tolerance.
Use this two-digit number for installation in switches and indicators.
For use with clear or white cap only.
5 Vdc and 15 Vdc include internal current limiting resistor. Other voltages available—contact your local
Eaton Sales Representative.
External current limiting required. User must include in circuit—to give current of 20 mA to LED.
Item
Number
To Order Lamp
Separately
CLC Lamp
Number
Nominal
Current MA
Average
Useful Life
(Hours)
External
Resistance
Required Bulb Size Lamp Length Lead Length
Circuit Volts Ignition Voltage
AC DC AC DC
70 28-3156 7A1H 105–125 150 1.5 25,000 47K (1/4 W) 95 135 T-2 0.60 0.25
Item
Number
To Order Lamp
Separately
CLC Lamp
Number
Nominal
Current MA
Average
Useful Life
(Hours)
External
Resistance
Required
Built-In
Resistance Bulb Size
Maximum
Overall Length
Circuit Volts Ignition Voltage
AC DC AC DC
80 28-3157 A1H 105–125 150 1.5 25,000 35K (1/4 W) None 95 135 T-2 0.67
81 28-3157-2 C-24 105–125 150 4.2 8,000 None 35K 95 135 T-2 0.67
Color Voltage
Without Diode
Protection
Item Number
With Diode
Protection
Item Number
Red
Vdc 01 11
5 Vdc 02 12
15 Vdc 03 13
Yellow
Vdc 04 14
5 Vdc 05 15
15 Vdc 06 16
Green
Vdc 07 17
5 Vdc 08 18
15 Vdc 09 19
Item Number Color
Forward
Current
(MA)
Luminous Intensity (MCD) Forward
Voltage (V)
Typical
Diffused or
UndiffusedMinimum Typical
93 Red 20 80 160 1.7 Undiffused
95 Green 20 80 160 1.7 Undiffused
96 Yellow 20 80 160 1.7 Undiffused
97 Amber 20 80 160 1.7 Undiffused
V11-T3-16 Volume 11—Vehicle and Commercial Controls CA08100013E—
March 2011
www.eaton.com
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.2
Pushbuttons
Illuminated AC/DC Rated
Mounting Barriers Ordering Guide
Catalog Number Example: 200B1
When switches are individually mounted, add 0.10 in (2.54 mm) per switch to
the appropriate bezel dimension. When switches are gang mounted, add 0.05 in
(1.27 mm) to the appropriate bezel dimension for each switch mounted plus an
additional 0.05 in (1.27 mm) to compensate for gang mounting.
Series 200 and 300 Mounting Barriers
Engraving and Hot Stamping
All legend markings are engraved or hot stamped in accordance with the limitations below. Standard
markings are of condensed gothic type, 1/8 in high characters, with white letters on blue, red and
green translucent pushbuttons and black letters on white, yellow, orange and all filtered pushbuttons.
Engraving and Hot Stamping
Accessories
These snap-on pushbutton caps are made of molded plastic
for use with grooved style switches. They are ordered
separately for user assembly.
Snap-On Pushbutton Caps—Standard
Notes
The full guard barrier is molded as an integral part of the switch body and is specified as a part of the complete switch catalog number.
An end barrier is attached to each side of housing. The center barrier is used between devices when gang mounting in a slot array.
For use with square devices and short side of rectangular devices.
For use with long side of rectangular devices. Use a center—long between switches if gang mounting.
Product
Series
Product
Type Code
Barrier Type and
Description Code
200 Barrier B
End—Short 1
Type 1 Type 2
Center—Short 2
End—Long 3
Type 3 Type 4
Center—Long 4
Pushbutton Size
Standard
Engraving Limitations
Standard
Hot Stamping Limitations
1/2 in square pushbuttons 2 lines, 4 characters per line 1 line, 4 characters per line
5/8 in square pushbuttons—full legend 3 lines, 6 characters per line 2 lines, 5 characters per line
5/8 in square pushbuttons—split legend 2 lines, 6 characters per line 2 lines, 5 characters per line
3/4 in square pushbuttons 3 lines, 7 characters per line 2 lines, 6 characters per line
3/4 in x 1 in rectangular pushbutton—full legend 3 lines, 9 characters per line 2 lines, 8 characters per line
3/4 in x 1 in rectangular pushbutton—split legend 2 lines, 9 characters per line 2 lines, 8 characters per line
Description
Button Diameter
in Inches (mm) Catalog Number
Black molded 0.625 (15.88) 53-3338
Red molded 0.625 (15.88) 53-3338-2
Volume 11—Vehicle and Commercial Controls CA08100013E—
March 2011
www.eaton.com V11-T3-17
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.2
Pushbuttons
Illuminated AC/DC Rated
Technical Data and Specifications
General Purpose Pushbuttons and Indicators—Illuminated and Non-Illuminated
Notes
Terminations are suitable for solder or female 110 connectors. Series 770: Solder only.
See Engraving and Hot Stamping table on Page V11-T3-16 for more information.
See Product Selection tables on Pages V11-T3-9–V11-T3-12 for more information.
See Series 200 and 300 Mounting Barriers table on Page V11-T3-16 for more information.
Series 206/208 220/221/224 231/234 580/581/586
Ratings—
Silver Contacts
Gold Contacts
5A at 125 Vac or 250 Vac
0.1A at 125 Vac/Vdc
5A at 125 Vac or 250 Vdc
0.1A at 125 Vac/Vdc
5A at 125 Vac or 250 Vdc
0.1A at 125 Vac/Vdc
Silver or Gold: 1A at 125 Vac
Gold-plated contacts for low level
Action Momentary
Alternate with positive latch down
Momentary
Alternate with positive latch down
Momentary
Alternate with positive latch down
Momentary
Alternate with positive latch down
Switch Circuitry Break before make
1PDT or 2PDT
2-independent lamp circuits
Break before make
1PDT or 2PDT
Break before make
1PDT or 2PDT
Double break
1PST or 2PST
Termination Types 0.02 x 0.11 in (0.51 x 2.79 mm) 0.02 x 0.11 in (0.51 x 2.79 mm) 0.02 x 0.110 in (0.51 x 2.79 mm) 0.01 x 0.11 in (0.31 x 2.79 mm)
Pushbuttons 0.62 x 1.00 in (15.87 x 25.40 mm)
Rectangular
Full or horizontal split lens
Plain, engraved or hot stamped
0.63 in (15.87 mm)
Square
Plain, engraved or hot stamped
0.63 in (15.87 mm)
Square
Plain, engraved or hot stamped
0.50 in (12.70 mm)
Square
3 heights above panel E
Plain, engraved or hot stamped
Mounting Snap-in panel mounting
Stainless steel retaining clips
Panel thickness: 0.03 to 0.19 in
(0.76 to 4.76 mm)
Barrier mount available
Snap-in panel mounting
Stainless steel retaining clips
Panel thickness: 0.03 to 0.19 in
(0.76 to 4.76 mm)
Barrier mount available
Snap-in panel mounting
Stainless steel retaining clips
Panel thickness: 0.03 to 0.19 in
(0.76 to 4.76 mm)
Barrier mount available
Snap-in panel mounting
Choice of two bezel styles:
Chamfered or Flat
Stainless steel retaining clips
Panel thickness: 0.06 to 0.19 in
(1.59 to 4.76 mm)
Lamps Two T 1-3/4 wedge base lamps
Incandescent
Front relampable
Lamp stationary to reduce
mechanical shock to filament
Two T 1-3/4 wedge base lamps
Incandescent
Front relampable
Lamp stationary to reduce
mechanical shock to filament
One rectangular LED flush with cap
Various voltages available
Diode protection available
Two T 1-3/4 wedge base lamps
Incandescent
Front relampable
Lamp stationary to reduce
mechanical shock to filament
Pushbutton Travel 0.19 in (2.29 mm) 0.19 in (2.29 mm) 0.19 in (2.29 mm) 0.17 in (4.32)
Series 770/775 810/815 820/825 860/861/845
Ratings—
Silver Contacts
Gold Contacts
10.5A at 125 Vac or 250 Vac
0.25A at 125 Vac or 30 Vdc
3A at 125 Vac or 250 Vac
0.25A at 125 Vac or 30 Vdc
3A at 125 Vac or 250 Vac
0.25A at 125 Vac or 30 Vdc
6A at 125 Vac or 3A at 250 Vac
0.25A at 125 Vac or 30 Vdc
Action Momentary
Alternate with positive latch down
Momentary
Alternate with positive latch down
Momentary
Alternate with positive latch down
Momentary
Alternate with positive latch down
Switch Circuitry 1PDT or 2PDT (2 circuit)
2-independent lamp circuits
Break before make
1PDT or 2PDT
Break before make
1PDT or 2PDT
Double break
1PST or 2PST, NO
Termination Types 0.02 x 0.125 in (0.25 x 3.18 mm)
Epoxy sealed
0.02 x 0.11 in (0.64 x 2.79 mm)
Epoxy sealed
0.02 x 0.11 in (0.64 x 2.79 mm)
Epoxy sealed
0.02 x 0.11 in (0.64 x 2.79 mm)
Pushbuttons 0.73 x 0.97 in (18.54 x 24.64 mm)
Rectangular
Plain, engraved or hot stamped
0.75 x 1 in (19.05 x 25.40 mm)
Rectangular
2 heights above panel
5 styles
Plain, engraved or hot stamped
0.75 in (19.05 mm)
Square
2 heights above panel
5 styles
Plain, engraved or hot stamped
0.62 in (15.87 mm)
Square
Horizontal split legend
(indicator only)
3 heights above bezel
5 styles
Plain, engraved or hot stamped
Mounting Panel mounting retained by molded
sleeve and nut
May be individually mounted
or gang mounted in horizontal
or vertical rows
Panel thickness from 0.03 to 0.25 in
(0.76 to 6.35 mm)
Barrier mount available
Snap mount available
Snap-in panel mounting
Stainless steel retaining clips
Panel thickness: 0.06 to 0.19 in
(1.59 to 4.76 mm)
Barrier mount available
Snap-in panel mounting
Stainless steel retaining clips
Panel thickness: 0.06 to 0.19 in
(1.59 to 4.76 mm)
Barrier mount available
Snap-in panel mounting
Stainless steel retaining clips
Panel thickness: 0.06 to 0.19 in
(1.59 to 4.76 mm)
Barrier mount available
Lamps Accepts two T 1-3/4 midget flange
base lamps
Incandescent or neon
Front relampable
One T 1-3/4 bi-pin base
Incandescent, neon or LED
Front relampable
Lamp stationary to reduce
mechanical shock to filament
One T 1-3/4 bi-pin base
Incandescent, neon or LED
Front relampable
Lamp stationary to reduce
mechanical shock to filament
One T 1-3/4 bi-pin base
Incandescent, neon or LED
Front relampable
Lamp stationary to reduce
mechanical shock to filament
Pushbutton Travel 0.22 in (5.59 mm) 0.22 in (5.59 mm) 0.22 in (5.59 mm) 0.22 in (5.59 mm)
V11-T3-18 Volume 11—Vehicle and Commercial Controls CA08100013E—
March 2011
www.eaton.com
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.2
Pushbuttons
Illuminated AC/DC Rated
Terminal Identification
When specified on order,
switches will have the terminals
identified as shown in the
illustration at right. Terminal
markings will be ink-stamped on
the side of the switch case and
unused terminal positions will
not be identified.
All views are rear of switch with
keyway or at down as applicable.
Terminal numbers 2, 2 and 5 and
5 and 8 are considered inboard
terminals for single-, two- and
four-pole switches respectively.
All others are considered
outboard.
Circuit Diagrams
Pushbutton Circuit Diagrams
Legends
Pushbutton Legend
Notes
Poles 11 and 12 may be eliminated for three-pole devices.
Poles 10, 11 and 12 may be eliminated for three-pole devices.
Dependent lamp.
Independent lamp.
Two circuit—indicates a special type of double-throw switch in which the two circuits being
controlled may be independent of each other.
For 206 Series, an additional lamp is available.
Available in 1PDT or 2PDT.
Circuit Letter Schematic Circuit Letter Schematic
A
1PST
I
2 circuit
B
1PDT
J
1PST
C
2PST
K
1PDT
D
2PDT
L
2PST
E
4PST
M
2PST
F
4PDT
N
2PDT
G
1PST
P
1PDT
H
1PDT
Q
2 circuit
1
2
3
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
10
11
12
Single-
Pole
Two-
Pole
Four-
Pole
3
2
36
14
2
3
1
3
2
6
5
2
3
1
5
6
4
4
31
2
3
2
6
5
9
8
12
11
13
24
2
3
1
5
6
4
8
9
7
11
12
10
3
2
4
6
3
2
4
6
B
A
C
C
NC NO
G
H
NONC
Legend Rocker Switch Type
Contact terminal—will make contact with switch lever
Isolated terminal—does not make contact with lever
Center terminal and switch lever
Bulb
Momentary contact
Denotes mechanical contact portion
Volume 11—Vehicle and Commercial Controls CA08100013E—
March 2011
www.eaton.com V11-T3-19
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.2
Pushbuttons
Illuminated AC/DC Rated
Dimensions
Approximate Dimensions in Inches (mm)
206 Series
220 Series
231 Series
580 Series
770 Series
810 Series
LEGEND
LEGEND
NC
NC
NO NO
CA
B
2C
0.312
(7.92)
0.400
(11.18)
1.133
(28.78)
0.900
(22.86)
0.740
(18.80)
0.190
(4.83)
1.200
(30.48)
0.990
(25.15)
0.600
(15.24)
0.800
(20.32)
1.400
(35.56)
0.705 + 0.005
(19.05 + 0.127/
– 0.000)
1.140 + 0.005
(28.96 + 0.127/
– 0.000)
LEGEND
NC
NC
NO NO
C
0.312
(7.92)
0.400
(10.16)
0.500
(12.70)
0.740
(18.80)
Typ.
0.190
(4.83)
0.800
(20.32)
Typ. 0.600
(15.24)
Typ.
1.400
(35.56)
C
0.750 + 0.005
(19.05 + 0.127/
– 0.000)
0.750 + 0.005
(19.05 + 0.127/
– 0.000)
NC
NC
NO NO
C
0.312
(7.92)
0.400
(10.16)
0.500
(12.70)
0.740
(18.80)
Typ.
0.190
(4.83)
0.800
(20.32)
Typ.
0.600
(15.24)
Typ.
1.400
(35.56)
C
0.100
(2.54)
C
L0.300
(7.62)
0.140
(3.56)
LED
C
L
0.750 + 0.005
(19.05 + 0.127/
– 0.000)
0.750 + 0.005
(19.05 + 0.127/
– 0.000)
0.400
(10.16)
0.310
(7.87)
0.890
(22.61)
A = 0.270 (6.86)
B = 0.330 (8.38)
C = 0.440 (11.18)
0.685
(17.40)
Typ.
0.500
(12.70)
Typ.
LEGEND
0.010 (0.254)
Rad. Max.
0.625 + 0.010
(15.88 + 0.254/
– 0.000)
0.625 ± 0.010
(15.88 ± 0.254)
0.400
(10.16)
0.960
(24.38)
0.970
(24.64)
1.190
(30.23)
0.730
(18.54)
F-S = 0.360 (9.14)
G = 0.270 (6.86)
H = 0.120 (3.05)
0.120
(3.05)
Panel thickness
0.030 (0.762) to
0.250 (6.35)
2.200
(55.88)
0.125
(3.18)
0.875 ± 0.005
(22.23 ± 0.127)
1.110 ± 0.005
(28.19 ± 0.127)
0.550
(13.97)
0.940
(23.88)
0.310
(7.87)
0.910
(23.11)
A = 0.330 (8.38)
B = 0.440 (11.18)
1.000
(25.40)
LEGEND
0.010 (0.254)
Rad. Max.
1.170
(29.72)
0.750
(19.05)
1.070
(27.18)
1.110 ± 0.005
(28.19 ± 0.127)
0.875 ± 0.005
(22.23 ± 0.127)
V11-T3-20 Volume 11—Vehicle and Commercial Controls CA08100013E—
March 2011
www.eaton.com
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.2
Pushbuttons
Illuminated AC/DC Rated
Approximate Dimensions in Inches (mm)
820 Series 860 Series
A = 0.330 (8.38)
B = 0.440 (11.18)
LEGEND
0.750
(19.05)
Typ.
0.940
(23.88)
Typ.
0.025
(0.64)
0.280 (7.11)
0.840
(21.34)
0.660
(16.76)
1.110 (28.19)
0.160
(4.06) 0.160 (4.06)
0.310
(7.87)
0.910
(23.11) 0.090
(2.29)
0.010 (0.254)
Rad. Max.
0.875 + 0.005
(22.23 + 0.127/
– 0.000)
0.875 + 0.005
(22.23 + 0.127/
– 0.000)
LEGEND
0.755 ± 0.005
(19.18 ± 0.127)
0.755 ± 0.005
(19.18 ± 0.127)
0.010 (0.254)
Rad. Max.
0.280
(7.11)
0.515
(13.08)
0.250
(6.35)
1.000
(2.54)
0.310
(7.87)
0.620
(15.75)
Typ.
0.850
(21.59)
Typ.
A = 0.240 (6.10)
B = 0.350 (8.89)
C = 0.140 (3.56)
Index
A
above, 10
AC, 1-13
Accepts, 2, 10
Accessories, 1, 9
accordance, 9
across, 8
Action, 2-5, 10
add, 2-6, 9
additional, 9, 11
All, 2, 8-9, 11
all, 9
Alt, 2-5
Alternate, 10
Amber, 2, 6, 8
Amps, 7
An, 9
an, 9, 11
and, 1-13
ange, 3
appliances, 1
applicable, 11
applications, 1
appropriate, 2-6, 9
Approximate, 12-13
approximately, 7
are, 1, 8-11
array, 9
as, 1, 9, 11
ASA, 7
assembly, 9
at, 1-13
attached, 9
Available, 5-6, 11
available, 1-6, 8, 10-11
Average, 7-8
average, 8
B
Barrier, 9-10
barrier, 2, 9
Barriers, 9-10
barriers, 2, 4-5
Base, 2-8
base, 10
be, 6-7, 10-11
before, 10
being, 11
below, 7, 9
between, 9
bezel, 3-5, 9-10
Bi, 7-8
bi, 10
Black, 2-3, 5-6, 9
black, 9
Blue, 2-6
blue, 6, 8-9
body, 9
Bottom, 2, 4, 6
bottom, 2, 5
Index
Break, 10
break, 10
Brightness, 7
Built, 8
Bulb, 8, 11
bulbs, 2
Button, 9
by, 10
C
CA, 1-13
call, 1-13
Cap, 1, 6
cap, 2, 4-6, 8, 10
Caps, 6, 9
caps, 1, 8-9
case, 11
Catalog, 1-6, 9
catalog, 1-6, 9
Center, 9, 11
center, 9
Certifications, 1
Certified, 1
Chamfered, 3, 10
characters, 9
Choice, 10
Circuit, 1, 8, 11
circuit, 8, 10-11
Circuitry, 10
circuits, 10-11
CL, 12
CLC, 8
Clear, 2-3, 5-6
clear, 8
clips, 10
Code, 9
code, 2-6
Color, 2-6, 8
color, 6
colored, 1, 6, 8
colors, 6
com, 1-13
combinations, 8
Commercial, 1-13
commercial, 1
compensate, 9
complete, 2-6, 9
condensed, 9
connectors, 10
considered, 11
consistent, 1
Contact, 2-5, 11
contact, 8, 11
Contacts, 10
contacts, 10
Contents, 1
control, 2-6
controlled, 11
Controls, 1-13
CSA, 1
Current, 8
current, 8
Cyp, 12
D
Data, 1, 10
date, 1
DC, 1-13
Deadfront, 2, 5-6
degree, 6
Delivery, 1-13
Denotes, 11
Dependent, 11
Description, 1, 9
Design, 7
Designed, 7
determine, 1-6
devices, 6, 9, 11
Diagram, 1
Diagrams, 1, 11
Diameter, 9
Diffused, 8
digit, 2-5, 7-8
dimension, 9
Dimensions, 1, 12-13
Diode, 8, 10
Display, 6
display, 2-6
divider, 6
does, 2, 5, 11
Double, 10
double, 11
down, 10-11
Index
E
Each, 1
each, 9, 11
Eaton, 1, 8
eaton, 1-13
electronics, 1
eliminated, 11
End, 9
end, 9
engraved, 9-10
Engraving, 9-10
Epoxy, 10
equipment, 1
ermination, 10
especially, 8
Example, 2-6, 9
Except, 1
External, 8
external, 8
F
female, 10
filament, 10
Filtered, 2, 5-6
filtered, 9
Flange, 7-8
flange, 10
Flat, 3, 10
Flush, 3-5
flush, 10
For, 1-13
for, 1-2, 6-11
Forward, 8
Four, 11
four, 11
from, 2-6, 10
Front, 10
Full, 2-6, 10
full, 2, 4, 6, 9
G
gang, 9-10
General, 1, 10
generally, 7
give, 8
GNO, 11
Gold, 2-5, 10
gold, 2, 5
gothic, 9
Gray, 2-3, 5-6
gray, 6
Green, 2-6, 8
green, 2, 6, 8-9
grooved, 9
guard, 9
Guide, 1
GuideCatalog, 9
H
have, 11
Height, 2-6
heights, 10
high, 6, 9
Horiz, 2, 5
Horizontal, 10
horizontal, 10
Hot, 9-10
hot, 9-10
Hours, 7-8
housing, 9
How, 2-6
I
Identification, 1, 11
identified, 11
identify, 1
if, 9
Ignition, 8
Index
Illuminated, 1-13
illuminated, 1-6
illumination, 6
illustration, 11
Immediate, 1-13
In, 8
in, 2-13
inboard, 11
Incandescent, 2-5, 7, 10
incandescent, 7
Inches, 9, 12-13
include, 8
increase, 7
Independent, 11
independent, 10-11
indicated, 8
indicates, 11
Indicator, 1-5
indicator, 1, 4-5, 10
Indicators, 1, 8, 10
indicators, 2-3, 7-8
individually, 9-10
industry, 1
information, 2, 10
ink, 11
insert, 6
inserts, 6, 8
installation, 7-8
installed, 8
instrumentation, 1
integral, 9
Intensity, 8
internal, 8
is, 2, 5, 7, 9, 11
Isolated, 11
Item, 7-8
item, 2-5
K
keyway, 11
KMParts, 1-13
L
Lab, 7
Lamp, 1-5, 7-8, 10
lamp, 1, 6-8, 10-11
Lamps, 2-5, 7-8, 10
lamps, 2, 6-8, 10
latch, 10
Lead, 8
LED, 2, 5-6, 8, 10, 12
LEDs, 8
LEGEND, 12-13
Legend, 6, 11
legend, 9-10
Legends, 1, 11
Length, 8
Lens, 2-6
lens, 1-2, 5, 10
less, 7
Letter, 1, 11
letters, 2-6, 9
level, 10
lever, 11
Life, 7-8
life, 7-8
Light, 2, 6
lighted, 2-6
Limitations, 9
limitations, 9
limiting, 8
line, 9
lines, 9
list, 1
local, 8
Long, 9
long, 9
look, 1
low, 10
Lumens, 7
Luminous, 8
Lunar, 2-3, 5-6
M
MA, 8
mA, 5, 8
Index
made, 9
make, 10-11
many, 1
March, 1-13
markings, 9, 11
matching, 1
Material, 2-5
Matte, 2-6
matte, 6
MatteT, 3
Max, 12-13
Maximum, 8
May, 10
may, 6, 11
MCD, 8
Measured, 6
mechanical, 10-11
medical, 1
Midget, 7-8
midget, 10
Minimum, 8
mm, 2-6, 9-10, 12-13
molded, 9-10
Mom, 2-5
Momentary, 10-11
more, 10
most, 1
mount, 10
mounted, 9-10
Mounting, 2-5, 9-10
mounting, 1, 9-10
MSCP, 7
must, 8
N
NC, 3, 5, 11-12
Neon, 4-5, 8
neon, 10
NO, 3, 10, 12
No, 2, 4-5
no, 6
NOH, 11
Nominal, 8
Non, 1, 6, 10
non, 1-3, 5
None, 8
Not, 2-6
not, 2, 5, 8, 11
noted, 1
Notes, 1-11
numbe, 6
Number, 1-9
number, 1-9
numbers, 1-6, 11
nut, 10
O
of, 1-6, 8-11
offers, 1
office, 1
On, 9
on, 2-6, 9-11
One, 10
one, 2, 5
Only, 2
only, 5-6, 8, 10
Operating, 7
operation, 7
options, 1
Or, 3
or, 1-13
Orange, 2-6
orange, 9
Order, 2-8
order, 11
ordered, 9
Ordering, 9
Other, 8
other, 1, 11
others, 11
outboard, 11
Overall, 8
Overview, 1
P
Page, 1-5, 10
PagePushbutton, 1
Pages, 10
Panel, 10, 12
Index
panel, 6, 10
part, 1, 9
PDT, 2, 4-5, 10-11
per, 9
Pin, 7-8
pin, 10
Plain, 10
plastic, 9
plate, 3
plated, 10
plus, 9
Pole, 2, 5, 11
pole, 2, 5, 11
Poles, 2-5, 11
portionTerminal, 11
positions, 11
positive, 10
Prefix, 2-6
Product, 1-6, 9-10
product, 1
Protection, 8
protection, 10
PST, 2-3, 5, 10-11
Purpose, 1, 10
Pushbutton, 1-6, 9-11
pushbutton, 1, 6, 9
Pushbuttons, 1-13
pushbuttons, 9
Q
quickly, 1
R
Rad, 12-13
range, 1
Rated, 1-13
rated, 7
Ratings, 10
rear, 11
Recognized, 1
Recommended, 8
recommended, 8
Rectangular, 10
rectangular, 9-10
Red, 2-6, 8-9
red, 6, 9
reduce, 10
Refer, 2
refer, 1
relampable, 10
Representative, 8
require, 2, 5
Required, 8
required, 1, 8
Resistance, 8
resistor, 8
respectively, 11
retained, 10
retaining, 10
right, 11
Rocker, 11
RoHS, 1
rows, 10
rs, 6
S
Sales, 8
Schematic, 11
sealed, 10
See, 1, 10
Selection, 1-7, 10
Separately, 7-8
separately, 9
Series, 1-13
series, 1, 8
SeriesTo, 7
shock, 10
Short, 9
short, 9
Shorty, 8
shown, 8, 11
side, 9, 11
Silver, 2-5, 10
silver, 2, 5
Single, 11
single, 11
Size, 8-9
sleeve, 10
slot, 9
Index
smoky, 6
smooth, 6
Snap, 9-10
snap, 9
sold, 8
Solder, 2-5, 10
solder, 10
solid, 6
special, 11
Specifications, 1, 10
specified, 9, 11
Split, 6
split, 2, 4, 6, 9-10
Square, 10
square, 9
Stainless, 10
stamped, 9-11
Stamping, 9-10
Standard, 7, 9
standard, 1
Standards, 1
start, 2-6
stationary, 10
steel, 10
Style, 2-6
style, 2, 4-5, 9
styles, 1, 10
Subminiature, 7
such, 1
suitable, 10
Support, 1-13
surface, 6
Switch, 1-5, 10-11
switch, 9, 11
Switches, 8
switches, 1, 7-9, 11
SwitchPushbutton, 1
T
table, 2-5, 10
tables, 1, 10
Tech, 1-13
Technical, 1, 10
Terminal, 1, 11
terminal, 11
terminals, 11
Termination, 10
Terminations, 2-5, 10
test, 1
The, 9
the, 1-6, 9, 11
Then, 1
These, 9
They, 9
thickness, 10, 12
this, 7-8
those, 8
three, 11
through, 8
throw, 11
To, 2-8
to, 1-2, 8-10, 12
tolerance, 7-8
Top, 2-6
top, 6
Translucent, 3, 5
translucent, 6, 9
Transmitted, 6
transmitted, 6
Travel, 10
Two, 10-11
two, 2-8, 10-11
Typ, 12-13
Type, 2-6, 9, 11
type, 2-6, 9, 11
Types, 10
Typical, 8
U
UL, 1
Undiffused, 8
unused, 11
up, 1
Use, 2-5, 7-9
use, 8-9
used, 6, 8-9
Useful, 8
useful, 8
User, 8
user, 9
Index
V
Vac, 8, 10
vailable, 6
values, 8
variety, 1
Various, 10
vcbu, 1
Vdc, 2, 8, 10
VdcC, 2
Vehicle, 1-13
verage, 8
verified, 1
versions, 1
Vert, 2, 4-5
vertical, 10
views, 11
Visit, 1
Voltage, 8
voltage, 7
voltages, 8, 10
Volts, 7-8
Volume, 1-13
W
Wedge, 7
wedge, 10
When, 9, 11
when, 9
where, 1
which, 11
White, 2-6
white, 2-3, 5-6, 8-9
wide, 1
will, 7, 11
Wire, 8
With, 8
with, 2-6, 8-11
Without, 8
www, 1-13
Y
Yellow, 2-6, 8
yellow, 6, 9
your, 8
