Anaren, Inc. | 6635 Kirkville Road | East Syracuse, NY 13057
800.411.6596 | www.anaren.com | AIR@anaren.com
The item described in this
product brief is part of our
total AIR Support soluon.
To learn more, visit our
website or just ask us!
Anaren Integrated Radio (AIR)
Low-power RF modules, rmware & development tools that make it easy to ’go wireless’
Features Benefits
Block diagram
Frequency range: 902-928 MHz (N. America)
and 868-870 MHz (Europe)
FCC, IC and ETSI compliant, shielded package
FCC ID: X7J-A11072401 // IC: 8975A-A11072401
Digital RSSI output
Programmable output power up to +12dBm
High sensitivity (1.2 kBaud, 1% packet error rate)
-110 dBm at 915 MHz (compliant to FCC/IC)
-115 dBm at 869 MHz (compliant to ETSI)
Ultra-small package size: 9 x 16 x 2.5mm
LGA footprint
RoHS compliant
Operating temperature -40 to +85˚C
Impedance-controlled, multi-layer PCB
1.8 to 3.6 VDC
Low current consumption (15 mA in RX, 1.2
kBaud, 915 MHz)
200 nA sleep mode current consumption
Efficient SPI interface; all registers can be
programmed with one “burst” transfer
Available in tape & reel and matrix tray
Module weight approximately 0.4 grams
A110LR09A
The A110LR09A is an ULTRA low cost, high-performance, FCC & IC certified
and ETSI-compliant radio module that incorporates the Texas Instruments
CC110L “value line” transceiver chip, all in the industry’s smallest package:
9 x 16 x 2.5mm.
Minimal RF engineering experience necessary
No additional “Intentional Radiator”
certification required (FCC 15.247a2, IC RSS-
210, ETSI EN 300 220)
Minimal real estate required
Easily implemented on a two layer PCB
No additional harmonic filtering required
100% RF-tested in production
Common footprint for similar products in family
No additional DC decoupling required
Integrated analog temperature sensor
Excellent receiver selectivity and blocking
performance
Suitable for frequency hopping systems,
thanks to a fast-settling frequency synthesizer
with 90 μs settling time
Impedance-matched balun for optimized
efficiency
Support for asynchronous and synchronous
serial receive/transmit mode for backwards
compatibility with existing radio
110L Series
PLEASE NOTE: Additional information on the Texas Instruments
CC110L device can be found in the company’s latest datasheet
release at http://www.ti.com
This product is not to be used in any implantable medical device or external
medical device intended to regulate or monitor biological functions, including but
not limited to devices such as pacemakers, defibrillators, cardiac
resynchronization devices, pressure sensors, biochemical stimulators and
neurostimulators. ANAREN MAKES NO WARRANTY OF FITNESS OR
MERCHANTABILITY OF THIS PRODUCT FOR ANY USE OF THIS TYPE.
Anaren shall not be responsible for any consequential damages arising from the
sale or use of this product for any use of this type. The ultimate user of the
product assumes all risk of personal injury or death arising from a prohibited use.
Anaren Integrated Radio (AIR)
Low-power RF modules, rmware & development tools that make it easy to ’go wireless’
The item described in this
product brief is part of our total
AIR Support solution. To learn
more, visit our website or just
ask us!
For more information
see product User’s
Manual, available
online.
Anaren, Inc. | 6635 Kirkville Road | East Syracuse, NY 13057
800.411.6596 | www.anaren.com | AIR@anaren.com
Product overview Layout Information
Pin diagram
Nomenclature
The A110LR09A is a high-performance, dual-
band FCC & IC certified and ETSI compliant radio
module that incorporates the Texas Instruments
CC110L “value line” low-cost transceiver chip in
the industry’s smallest package (9 x 16 x 2.5mm)
and is compatible with all TI-approved software
stacks.
With an LGA pad footprint, this module is
designed to effortlessly integrate into a wide
range of applications, including: industrial control,
building automation, low-power wireless sensor
networks, lighting control, and automated meter
reading.
The A110LR09A has an RoHS-compliant ENIG
finish and is packaged on tape & reel or in matrix
trays for high-volume automated manufacturing.
NC = “NO Connection”
Pin is NOT connected
internally.
DNC = “Do Not Connect”
Pin reserved for internal
use, ensure mating
footprint pads are isolated.
GND = “Ground”
Connect the maximum
number possible (minimum
one for proper operation).
Caution! ESD sensitive device.
Precautions should be used when
handling the device in order to
prevent permanent damage.
A (Anaren)
1 Chip series (CC1101, CC110L, CC2500)
2 Function (R = radio only)
3 Frequency band (x100MHz)
4 Form factor (A = Internal Antenna, C = Connector)
5 Design ID (00 = Default)
6 Application (G = General)
7 Packaging (R = Tape/Reel, M = Matrix Tray)
Ground detail (corner) Ground detail (edge)
Footprint (PWB)
Refer to User’s Manual for additional layout guidelines.
Dimensions in mm.
Viewed from top side
1308a
