TOSHIBA TPS825 TOSHIBA PHOTO IC SILICON EPITAXIAL PLANAR TPS825 PHOTO IC FOR PLASTIC FIBER/POLYMER CLAD FIBER Unit in mm TPS825 contains a light receiving IC integrating photo diode, [J (R05) amplifier circuit, waveform shaping circuit, ete. in 1 chip. +02 +02 (C03) | 45-04 (ROS) yao Output is directly connectable to IC as it changes digitally. When TL light is received, output becomes high level. e yo S | 3 1 s ae Compatible with TTL, LSTTL and CMOS. = | I @ Wide operating supply voltage (Voc =4.5 to 17V) 9.614015 13-"0.41+0.15 MAXIMUM RATINGS (Ta = 25C) PP CL.9)K19)]| 1.05 40.2 CHARACTERISTIC SYMBOL | RATING | UNIT Supply Voltage Vcc 17 Vv Low Level Output Current loi 50 mA (_ ) =REFERENCE VALUE Allowable Power Dissipation Po 250 mw ||JEDEC _ Operating Temperature Range Topr 25~85 C KEIAJ _ Storage Temperature Range Tstg 40~100 C TOSHIBA 0-5H2 Soldering Temperature - Time Tsol 260C - 3s Weight : 0.12g (TYP.) PIN CONNECTION 96100 1EAA2 @ TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 1997-09-08 1/4 TOSHIBA TPS825 OPTO-ELECTRICAL CHARACTERISTICS (Ta = 25C) CHARACTERISTIC SYMBOL TEST CONDITION MIN. | TYP. | MAX. | UNIT Operating Supply Voltage Vcc Ta=25C 4.5 17} V Low Level Vv I9L=16mA, Vec=5V 0.1 0.4 Output Current mai OL OL = CC Vv HighLevel | VOH | VCC=5V, Pf=50.W 4.0 | | Low Level I Vceco=5v 2.5 5.0 Supply Current oo CCL CC mA High Level IccH | Voc=5V, Pe=50nW _ 1.2] 3.0 HL Threshold Light p Voc=bV, Ta=25C, 5.0 | 10.0 | WwW Input(Note) fLH Ap =660nm _ 23 | 20 | dBm Propagation | L->H tpLH 2.0 Switching] Time H-L| tppn | Ta=25C, Voc=5V, | 60] Time Rise Time tr Ry =2800, Pr=05550W foal | Fall Time te 0.05 | (Note) Equivalent to the optical output at the end of a plastic fiber in the core diameter 1lmm. SWITCHING TIME TEST CIRCUIT owl 470, PRECAUTION Please be careful of the followings. 1. Lead forming shall be performed before soldering. (Soldering portion of lead : above 1.5mm from the body of the device) O5V VIN 50% S / 3 tpLH tpHL - VOUT {X17 99%," 0H VOUT 1.5V + 10% ty _| Lt VoL 2. During 100us after turning on Vcc, output voltage changes for stabilizing the inner circuit. 3. Pin surge voltage (Note) : MAX 150V (Note) Surge voltage chargeable between optional 2 pins at storage charge below 200pF. 1997-09-08 2/4 TOSHIBA TPS825 Po Ta 300 250 200 150 100 50 ALLOWABLE POWER DISSIPATION Po (mW) 20 0 20 40 60 80 100 120 AMBIENT TEMPERATURE Ta (C) VoL IOL (TYP.) 3 5 10 30 = 50 100 LOW LEVEL OUTPUT CURRENT Io1L (mA) LOW LEVEL OUTPUT VOLTAGE Voz, (V) Icc - Vcc (TYP.) SUPPLY CURRENT Icg (mA) 0 4 6 12 16 20 SUPPLY VOLTAGE Voc (V) LOW LEVEL OUTPUT CURRENT Ioj, (mA) LOW LEVEL OUTPUT VOLTAGE Voy (V) RELATIVE THRESHOLD LIGHT INPUT IoL Ta 60 50 40 30 20 10 0 20 0 20 40 60 80 100 120 AMBIENT TEMPERATURE Ta (C) VoL Ta (TYP.) Voc =5V 0.5 0.3 I9L=30mA 0.1 0.05 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE Ta (C) PfLH, PfHL - Vcc (TYP.) Ta=25C 0 4 8 12 16 20 SUPPLY VOLTAGE Voc (V) 1997-09-08 3/4 TOSHIBA TPS825 PfLH, Prot Ta (TYP.) tpLH, tpHL Pr/PfLH (TYP.) Ta=25C Voc=5v Rp = 2800, Vcec=5V RELATIVE THRESHOLD LIGHT INPUT 0 -40 -20 0 20 40 60 80 100 0 3 5 10 30 650 100 RATIO WITH THRESHOLD Ps/Peuy AMBIENT TEMPERATURE Ta (C) HSL PROPAGATION DELAY TIME tpLH.tpHL (8) tr, t RL (TYP.) 0.5 0.3 0.1 0.05 RISE AND FALL TIME ty, tg (us) 0.03 0.01 0.2 0.5 1 3 5 10 30 50 100 LOAD RESISTANCE Ry (kQ) 1997-09-08 4/4