GALVANTECH, INC. ASYNCHRONOUS SRAM GVT72256A16 REVOLUTIONARY PINOUT 256K X 16 256K x 16 SRAM +5V SUPPLY REVOLUTIONARY PINOUT FEATURES GENERAL DESCRIPTIO N * * * * * * * * * * The GVT72256A16 is organized as a 262,144 x 16 SRAM using a four-transistor memory cell with a high performance, silicon gate, low-power CMOS process. Galvantech SRAMs are fabricated using double-layer polysilicon, double-layer metal technology. This device offers center power and ground pins for improved performance and noise immunity. Static design eliminates the need for external clocks or timing strobes. For increased system flexibility and eliminating bus contention problems, this device offers chip enable (CE#), separate byte enable controls (BLE# and BHE#) and output enable (OE#) with this organization. The device offers a low power standby mode when chip is not selected. This allows system designers to meet low standby power requirements. * Fast access times: 10, 12, and 15ns Fast OE# access times: 5, 6, and 7ns Single +5V +10% power supply Fully static -- no clock or timing strobes necessary All inputs and outputs are TTL-compatible Three state outputs Center power and ground pins for greater noise immunity Easy memory expansion with CE# and OE# options Automatic CE# power down High-performance, low-power consumption, CMOS double-poly, double-metal process Packaged in 44-pin, 400-mil SOJ and 44-pin, 400-mil TSOP OPTIONS * * * * MARKING Timing 10ns access 12ns access 15ns access -10 -12 -15 Packages 44-pin SOJ (400 mil) 44-pin TSOP (400 mil) J TS Power consumption Standard Low Temperature Commercial Industrial PIN ASSIGNMENT 44-Pin SOJ 44-Pin TSOP None L None I (0C to 70C) (-40C to 85C) Galvantech, Inc. 3080 Oakmead Village Drive, Santa Clara, CA 95051 Tel (408) 566-0688 Fax (408) 566-0699 Web Site http://www.galvantech.com Rev. 7/99 A0 A1 A2 A3 A4 CE# DQ1 DQ2 DQ3 DQ4 VCC VSS DQ5 DQ6 DQ7 DQ8 WE# A5 A6 A7 A8 A9 1 44 2 43 3 42 4 41 5 40 6 39 7 38 8 37 9 36 10 35 11 34 12 33 13 32 14 31 15 30 16 29 17 28 18 27 19 26 20 25 21 24 22 23 A17 A16 A15 OE# BHE# BLE# DQ16 DQ15 DQ14 DQ13 VSS VCC DQ12 DQ11 DQ10 DQ9 NC A14 A13 A12 A11 A10 Galvantech, Inc. reserves the right to chang e products or specifications without notice . GALVANTECH, GVT72256A16 REVOLUTIONARY PINOUT 256K X 16 FUNCTIONAL BLOCK DIAGRAM VCC BLE# VSS DQ1 MEMORY ARRAY 512 ROWS X 512 X 16 COLUMNS I/O CONTROL ROW DECODER ADDRESS BUFFER A0 DQ8 DQ9 DQ16 A17 COLUMN DECODER July 22, 199 9 Rev. 7/99 2 POWER DOWN CE# BHE# WE# OE# Galvantech, Inc. reserves the right to change products or specifications without notice . GVT72256A16 REVOLUTIONARY PINOUT 256K X 16 GALVANTECH, TRUTH TABLE MOD E LOW BYTE READ (DQ1-DQ8) HIGH BYTE READ (DQ9-DQ16) WORD READ (DQ1-DQ16) LOW BYTE WRITE (DQ1-DQ8) HIGH BYTE WRITE (DQ9-DQ16) WORD WRITE (DQ1-DQ16) OUTPUT DISABLE STANDBY CE# WE# OE# BLE# BHE# DQ1DQ8 DQ9DQ16 POWE R L L L L L L L L H H H L L L X H L L L X X X X H L H L L H L H X H L L H L L H X Q HIGH-Z Q D HIGH-Z D HIGH-Z HIGH-Z HIGH-Z Q Q HIGH-Z D D HIGH-Z HIGH-Z ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE H X X X X HIGH-Z HIGH-Z STANDBY PIN DESCRIPTION S SOJ & TSOP Pin Number s SYMBO L TYPE DESCRIPTIO N 1, 2, 3, 4, 5, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 42, 43, 44 A0-A17 Input Addresses Inputs: These inputs determine which cell is addressed . 17 WE# Input Write Enable: This input determines if the cycle is a READ or WRITE cycle. WE# is LOW for a WRITE cycle and HIGH for a READ cycle . 6 CE# Input Chip Enable: This active LOW input is used to enable the device. When CE# is LOW, the chip is selected. When CE# is HIGH, the chip is disabled and automatically goes into standby power mode. 39, 40 BLE#, BHE# Input Byte Enable: These active LOW inputs allow individual bytes to be written or read. When BLE# is LOW, the data is written to or read from the lower byte (DQ1-DQ8). When BHE# is LOW, the data is written to or read from the higher byte (DQ9-DQ16) . Input Output Enable: This active LOW input enables the output drivers . Input/Output SRAM Data I/O: Data inputs and data outputs. Lower byte is DQ1-DQ8 and upper byte is DQ9-DQ16. 41 OE# 7, 8, 9, 10, 13, 14, 15, 16, 29, 30, 31, 32, 35, 36, 37, 38 DQ1-DQ16 11, 33 VCC Supply Power Supply: 5V +10% 12, 34 VSS Supply Ground July 22, 199 9 Rev. 7/99 3 Galvantech, Inc. reserves the right to change products or specifications without notice . GVT72256A16 REVOLUTIONARY PINOUT 256K X 16 GALVANTECH, *Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device.This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. ABSOLUTE MAXIMUM RATINGS * Voltage on VCC Supply Relative to VSS........-0.5V to +7.0V VIN ..........................................................-0.5V to VCC+0.5V Storage Temperature (plastic) ..........................-55oC to +125o Junction Temperature .....................................................+125o Power Dissipation ...........................................................1.2W Short Circuit Output Current .......................................50mA DC ELECTRICAL CHARACTERISTICS AND RECOMMENDED OPERATING CONDITION S (All Temperature Ranges; VCC = 5V +10% unless otherwise noted) DESCRIPTIO N CONDITION S SYMBO L MIN MAX UNIT S NOTE S Input High (Logic 1) voltage VIH 2.2 VCC+1 V 1, 2 Input Low (Logic 0) Voltage VIl -0.5 0.8 V 1, 2 Input Leakage Current 0V < VIN < VCC ILI -5 5 uA Output Leakage Current Output(s) disabled, 0V < VOUT < VCC ILO -5 5 uA Output High Voltage IOH = -4.0mA VOH 2.4 Output Low Voltage IOL = 8.0mA VOL Supply Voltage VCC DESCRIPTIO N CONDITION S Power Supply Current: Operating TTL Standby CMOS Standby 4.5 V 1 0.4 V 1 5.5 V 1 SYM TYP POWE R -10 -12 -15 Device selected; CE# < VIL; VCC =MAX; f=fMAX; outputs open Icc 80 210 190 160 210 190 160 CE# >VIH; VCC = MAX; f=fMAX ISB1 standard low standard low 70 60 50 70 60 50 CE1# >VCC -0.2; VCC = MAX; all other inputs < VSS +0.2 or >VCC -0.2; all inputs static; f= 0 25 ISB2 0.1 standard low 10 10 10 4.0 4.0 4.0 UNITS NOTES mA 3, 14 mA 14 mA 14 CAPACITANCE DESCRIPTIO N CONDITION S Input Capacitance TA = 25oC; f = 1 MHz VCC = 5V Input/Output Capacitance (DQ) July 22, 199 9 Rev. 7/99 SYMBO L MAX UNIT S NOTE S CI 6 pF 4 CI/O 8 pF 4 4 Galvantech, Inc. reserves the right to change products or specifications without notice . GVT72256A16 REVOLUTIONARY PINOUT 256K X 16 GALVANTECH, AC ELECTRICAL CHARACTERISTICS (Note 5) (All Temperature Ranges; VCC = 5V DESCRIPTIO N +10%) - 10 - 12 MAX MIN - 15 SYM MIN MAX MIN MAX UNITS NOTES READ cycle time tRC 10 Address access time tAA 10 12 15 ns tACE 10 12 15 ns READ Cycl e Chip Enable access time 12 15 tOH 3 3 3 Chip Enable to output in Low-Z tLZCE 3 3 3 Chip disable to output in High- Z tHZCE Output hold from address chang e Output Enable access time 5 tAOE 6 5 6 ns ns ns 4, 7 7 ns 4, 6, 7 7 ns Output Enable to output in Low-Z tLZOE Output Enable to output in High-Z tHZOE 5 6 7 ns tABE 5 6 7 ns Byte Enable access time Byte Enable to output in Low-Z tLZBE Byte disable to output in High-Z tHZBE Chip Enable to power-up time tPU Chip disable to power-down tim e tPD 0 0 0 0 0 0 5 0 ns 6 0 7 0 10 12 15 4, 6 ns 4, 7 ns 4, 6, 7 ns 4 ns 4 WRITE Cycl e WRITE cycle time tWC 10 12 15 ns Chip Enable to end of write tCW 8 8 9 ns Address valid to end of write, with OE# HIGH tAW 8 8 9 ns Address setup time tAS 0 0 0 ns Address hold from end of write tAH 0 0 0 ns WRITE pulse width tWP2 10 10 11 ns WRITE pulse width, with OE# HIG H tWP1 8 8 9 ns Data setup time tDS 5 6 7 ns Data hold time tDH 0 0 0 ns Write disable to output in Low-Z tLZWE 3 4 5 Write Enable to output in High- Z tHZWE Byte Enable to end of write July 22, 199 9 Rev. 7/99 tBW 5 8 6 8 7 9 5 ns 4, 7 ns 4, 6, 7 ns Galvantech, Inc. reserves the right to change products or specifications without notice . GVT72256A16 REVOLUTIONARY PINOUT 256K X 16 GALVANTECH, OUTPUT LOADS AC TEST CONDITIONS Input pulse levels Q 0V to 3.0V Input rise and fall times 1.5ns Input timing reference levels 1.5V Output reference levels 1.5V Output load Z 0 = 50 50 30 pF Vt = 1.5V Fig. 1 OUTPUT LOAD EQUIVALENT See Figures 1 and 2 +5V 480 Q 255 5 pF Fig. 2 OUTPUT LOAD EQUIVALENT NOTES 8. WE# is HIGH for READ cycle. 1. All voltages referenced to VSS (GND). 9. 2. Overshoot: Undershoot: Device is continuously selected. Chip enable and output enables are held in their active state. VIH +7.0V for t tRC /2. VIL -2.0V for t tRC /2 3. Icc is given with no output current. Icc increases with greater output loading and faster cycle times. 4. This parameter is sampled. 5. Test conditions as specified with the output loading as shown in Fig. 1 unless otherwise noted. 6. Output loading is specified with CL=5pF as in Fig. 2. Transition is measured +500mV from steady state voltage. 7. At any given temperature and voltage condition, tHZCE is less than tLZCE and tHZWE is less than tLZWE. 10. Address valid prior to, or coincident with, latest occurring chip enable. 11. tRC = Read Cycle Time. 12. Chip Enable and Write Enable can initiate and terminate a WRITE cycle. 13. Capacitance derating applies to capacitance different from the load capacitance shown in Fig. 1. 14. Typical values are measured at 5V, 25oC and 20ns cycle time. DATA RETENTION ELECTRICAL CHARACTERISTICS (L Version Only ) DESCRIPTIO N CONDITION S SYMBO L MIN VDR ICCDR ICCDR 2 Chip Deselect to Data Retention Time tCDR Operation Recovery Time tR Vcc for Retention Data Data Retention Current July 22, 199 9 Rev. 7/99 CE# >VCC -0.2; all other inputs < VSS +0.2 or >VCC -0.2; all inputs static; f= 0 Vcc = 2V Vcc = 3V 6 TYP MAX UNIT S NOTE S 0.2 1.6 mA 13 0.3 2.4 mA 13 0 ns 4 tRC ns 4, 11 V Galvantech, Inc. reserves the right to change products or specifications without notice . GVT72256A16 REVOLUTIONARY PINOUT 256K X 16 GALVANTECH, LOW VCC DATA RETENTION WAVEFOR M DATA RETENTION MODE 4.5V VCC 4.5V VDR t CDR CE# tRC VIH VIL READ CYCLE NO. 1(8, 9) tRC ADDR VALID tAA tOH Q PREVIOUS DATA VALID DATA VALID READ CYCLE NO. 2(7, 8, 10, 12) tRC CE# tABE tHZCE BLE# BHE# tAOE tHZBE tLZOE OE# tLZBE tHZOE tACE tLZCE Q HIGH Z DATA VALID DON'T CARE UNDEFINED July 22, 199 9 Rev. 7/99 7 Galvantech, Inc. reserves the right to change products or specifications without notice . GVT72256A16 REVOLUTIONARY PINOUT 256K X 16 GALVANTECH, WRITE CYCLE NO. 1(7, 12, 13) (Write Enable Controlled with Output Enable OE# active LOW) ) t WC ADDR t t AW AH t CW CE# t BW BLE# BHE# tAS tWP2 WE# tDS D tDH DATA VALID t HZWE tLZWE Q HIGH Z WRITE CYCLE NO. 2(12, 13) (Write Enable Controlled with Output Enable OE# inactive HIGH ) t WC ADDR tAW t t AH CW CE# t BW BLE# BHE# t tWP1 AS WE# tDS D Q tDH DATA VALID HIGH Z DON'T CARE UNDEFINED July 22, 199 9 Rev. 7/99 8 Galvantech, Inc. reserves the right to change products or specifications without notice . GVT72256A16 REVOLUTIONARY PINOUT 256K X 16 GALVANTECH, WRITE CYCLE NO. 3(12, 13) (Chip Enable Controlled) t WC ADDR t t AW tAS AH tCW CE# t BW BLE# BHE# t WP1 WE# tDS D tDH DATA VALID Q HIGH Z DON'T CARE WRITE CYCLE NO. 4(12, 13) (Byte Enable Controlled) t WC ADDR tAW t AH tAS tBW BLE# BHE# t CW CE# tWP1 WE# t D Q DS t DH DATA VALID HIGH Z DON'T CARE July 22, 199 9 Rev. 7/99 9 Galvantech, Inc. reserves the right to change products or specifications without notice . GVT72256A16 REVOLUTIONARY PINOUT 256K X 16 GALVANTECH, Package Dimension s 44-pin 400 Mil Plastic SOJ (J) 1.129 (28.68) 1.123 (28.52) .405 (10.29) .395 (10.03) .445 (11.30) .435 (11.05) PIN #1 INDEX .148 (3.76) .138 (3.51) .050 (1.27) TYP .030 (0.76) MIN .095 (2.41) .080 (2.03) SEATING PLANE .020 (0.51) .015 (0.38) MAX MIN Note: All dimensions in inches (millimeters) .380 (9.65) .360 (9.14) or typical, min where noted. 44-pin 400 Mil Plastic TSOP (TS) .741 (18.81) .721 (18.31) .402 (10.21) .398 (10.11) PIN #1 INDEX .467 (11.86) .459 (11.66) .0315 (0.80) TYP .007 (0.18) .005 (0.12) SEATING PLANE .018 (0.45) .010 (0.25) Note: All dimensions in inches (millimeters) July 22, 199 9 Rev. 7/99 MAX MIN .032 (0.80) .047 (1.20) MAX .008 (0.20) .002 (0.05) .024 (0.60) .016 (0.40) or typical, max where noted. 10 Galvantech, Inc. reserves the right to change products or specifications without notice . GALVANTECH, GVT72256A16 REVOLUTIONARY PINOUT 256K X 16 Ordering Information GVT 72256A16 XX - XX X X Galvantech Prefix Temperature (Blank = Commercial I = Industrial) Power (Blank= Standard, L= Low Power) Part Number Speed ( 10 = 10ns, 12 = 12ns 15 = 15ns) Package (J = 400 mil SOJ, TS = TSOP TYPE II) July 22, 199 9 Rev. 7/99 11 Galvantech, Inc. reserves the right to change products or specifications without notice .