Hyper SIDELED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB A673, LT A673 Released Besondere Merkmale * Gehausetyp: weies SMT Gehause, farbloser klarer Verguss * Besonderheit des Bauteils: Abstrahlung parallel zur Platine, deshalb ideal zur Einkopplung in Lichtleiter * Wellenlange: 471 nm (blau), 532 nm (true green) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaN * optischer Wirkungsgrad: 2 lm/W (blau), 8 lm/W (true green) * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: Reflow Loten * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 12-mm Gurt mit 2000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D * Erweiterte Korrosionsfestigkeit: Details siehe Seite 10 Features * package: white SMT package, colorless clear resin * feature of the device: radiation direction parallel to PCB, so an ideal LED for coupling in light guides * wavelength: 471 nm (blue), 532 nm (true green) * viewing angle: Lambertian Emitter (120) * technology: InGaN * optical efficiency: 2 lm/W (blue), 8 lm/W (true green) * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: reflow soldering * preconditioning: acc. to JEDEC Level 2 * taping: 12 mm tape with 2000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D * Superior Corrosion Robustness: details see page 10 Anwendungen * Einkopplung in Lichtleiter * Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) * Innenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung, u. a.) * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Signal- und Symbolleuchten Applications * coupling into light guides * backlighting (LCD, switches, keys, displays, illuminated advertising, general lighting) * interior automotive lighting (e.g. dashboard backlighting, etc.) * marker lights (e.g. steps, exit ways, etc.) * signal and symbol luminaire 2012-06-15 1 LB A673, LT A673 Bestellinformation Ordering Information Typ Emissionsfarbe Color of Emission Type Lichtstarke1) Seite 16 Lichtstrom2) Seite 16 Bestellnummer Luminous Intensity1) page 16 IF = 10 mA IV (mcd) Luminous Flux2) page 16 IF = 10 mA V (mlm) Ordering Code LB A673-L2N1-35 LB A673-M2P1-35 LB A673-L2P1-35 blue 14.0 ... 35.5 22.4 ... 56.0 14.0 ... 56.0 75 (typ.) 120 (typ.) 100 (typ.) Q65110A1948 Q65110A1949 Q65110A1950 LT A673-P1Q2-25 LT A673-Q1R2-25 LT A673-N2S1-25 true green 45.0 ... 112.0 71.0 ... 180.0 35.5 ... 224.0 240 (typ.) 380 (typ.) 350 (typ.) Q65110A1960 Q65110A1961 Q65110A1962 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt und Farbe geliefert. Z.B.: LB A673-L2N1-35 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen L2, M1, M2 oder N1 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LB A673-L2N1-35 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -3, -4 oder -5 enthalten ist (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LB A673-L2N1-35 means that only one group L2, M1, M2 or N1 will be shippable for any one reel and color. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LB A673-L2N1-35 means that only 1 wavelength group -3, -4 oder -5 will be shippable. In order to ensure availability, single wavelength groups will not be orderable (see page 5 for explanation). Vergleichstabelle fur 20 mA Correllation Table for 20 mA Typ Type Emissionsfarbe Color of Emission LB A673-L2N1-35 LB A673-M2P1-35 LB A673-L2P1-35 blue LT A673-P1Q2-25 LT A673-Q1R2-25 LT A673-N2S1-25 true green Lichtstarke1) Seite 16 Luminous Intensity1) page 16 IF = 10 mA IV (mcd) 14.0 ... 35.5 22.4 ... 56.0 14.0 ... 56.0 45.0 ... 112.0 71.0 ... 180.0 35.5 ... 224.0 Siehe auch Grafik Seite 7 / see also graph on page 7 2012-06-15 2 Lichtstarke2) Lichtstrom2) Seite 16 Seite 16 Luminous Intensity2) page 16 IF = 20 mA IV (mcd) Luminous Flux2) page 16 IF = 20 mA V (mlm) 40 (typ.) 65 (typ.) 55 (typ.) 120 (typ.) 195 (typ.) 165 (typ.) 125 (typ.) 195 (typ.) 205 (typ.) 375 (typ.) 585 (typ.) 615 (typ.) LB A673, LT A673 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values LB Einheit Unit LT Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj Durchlassstrom Forward current (TS=25C) IF Stostrom Surge current t 10 s, D = 0.005, TS=25C IFM Sperrspannung3) Seite 16 Reverse voltage3) page 16 (TS=25C) VR 2012-06-15 3 + 110 +125 20 200 250 5 C mA mA V LB A673, LT A673 Kennwerte Characteristics (TS = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 10 mA Symbol Symbol (typ.) Dominantwellenlange5) Seite 16 Dominant wavelength5) page 16 IF = 10 mA Werte Values Einheit Unit LB LT peak 466 527 nm dom 471* 6 529* 12 nm Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 10 mA (typ.) 25 33 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 120 Grad deg. Durchlassspannung6) Seite 16 Forward voltage6) page 16 IF = 10 mA (min.) (typ.) (max.) VF VF VF 2.7 3.1 3.7 2.7 3.0 3.7 V V V Sperrstrom Reverse current VR = 5 V (typ.) (max.) IR IR 0.01 10 0.01 10 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF = 10 mA; -10C T 100C (typ.) TCpeak 0.04 0.04 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 10 mA; -10C T 100C (typ.) TCdom 0.03 0.04 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 10 mA; -10C T 100C (typ.) TCV - 4.5 - 3.6 mV/K Optischer Wirkungsgrad Optical efficiency IF = 10 mA (typ.) opt 2 8 lm/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 16 Junction/ambient4) page 16 Sperrschicht/Lotpad Junction/solder point (max.) (max.) * Einzelgruppen siehe Seite 5 Individual groups on page 5 **Rth(max) basiert auf statistischen Werten Rth(max) is based on statistic values 2012-06-15 4 Rth JA 430** K/W Rth JS 200** K/W LB A673, LT A673 Wellenlangengruppen (Dominantwellenlange)5) Seite 16 Wavelength Groups (Dominant Wavelength)5) page 16 Gruppe Group blue min. true green max. 2 min. max. Einheit Unit 517 523 nm 3 465 469 523 529 nm 4 469 473 529 535 nm 5 473 477 535 541 nm Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group Lichtstarke1) Seite 16 Luminous Intensity1) page 16 IV (mcd) 14.0 ... 18.0 ... 22.4 ... 28.0 ... 35.5 ... 45.0 ... 56.0 ... 71.0 ... 90.0 ... 112.0 ... 140.0 ... 180.0 ... L2 M1 M2 N1 N2 P1 P2 Q1 Q2 R1 R2 S1 18.0 22.4 28.0 35.5 45.0 56.0 71.0 90.0 112.0 140.0 180.0 224.0 Lichtstrom2) Seite 16 Luminous Flux2) page 16 V (mlm) 50 (typ.) 60 (typ.) 75 (typ.) 95 (typ.) 120 (typ.) 150 (typ.) 190 (typ.) 240 (typ.) 300 (typ.) 380 (typ.) 480 (typ.) 600 (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur 4 bzw. 6 bzw. 8 Helligkeitsgruppen bestehen. Einzelne Helligkeitsgruppen konnen nicht bestellt werden. Note: The standard shipping format for serial types includes either a lower familiy group, an upper family group or a grouping of all individual groups of 4 or 6 or 8 individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: P1-4 Example: P1-4 Helligkeitsgruppe Brightness Group Wellenlange Wavelength P1 4 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection. 2012-06-15 5 LB A673, LT A673 Relative spektrale Emission2) Seite 16 Relative Spectral Emission2) page 16 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TS = 25 C; IF = 10 mA OHL00478 100 I rel % 80 V 60 blue true green 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik2) Seite 16 Radiation Characteristic2) page 16 Irel = f (); TS = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2012-06-15 0.8 0.6 0.4 0 20 6 40 60 80 100 120 LB A673, LT A673 Durchlassstrom2) Seite 16 Forward Current2) page 16 IF = f (VF); TS = 25 C Relative Lichtstarke2) 7) Seite 16 Relative Luminous Intensity2) 7) page 16 IV/IV(10 mA) = f (IF); TS = 25 C OHL00485 102 mA IF 5 OHL10494 10 1 IV IV (10 mA) 5 101 5 10 0 blue true green 5 100 5 10-1 2.0 2.5 3.0 3.5 4.0 10 -1 0 10 4.5 V 5.0 5 10 1 IF VF Relative Vorwartsspannung2) Seite 16 Relative Forward Voltage2) page 16 VF = VF - VF(25 C) = f (Tj); IF = 10 mA (blue) VF Relative Lichtstarke2) Seite 16 Relative Luminous Intensity2) page 16 IV/IV(25 C) = f (Tj); IF = 10 mA OHL02352 0.4 V IV I V (25 C) 1.2 0.2 1.0 0.1 0.8 0.0 0.6 -0.1 0.4 -0.2 0.2 20 40 60 true green blue 0 -60 -40 -20 0 C 100 20 40 60 C 100 Tj Tj 2012-06-15 OHL13637 1.4 0.3 -0.3 -60 -40 -20 0 mA 10 2 7 LB A673, LT A673 Dominante Wellenlange2) Seite 16 Dominant Wavelength2) page 16 LB; dom = f (IF); TS = 25 C Dominante Wellenlange2) Seite 16 Dominant Wavelength2) page 16 LT; dom = f (IF); TS = 25 C OHL10503 474 nm OHL02365 550 nm dom dom 473 540 472 535 471 530 blue 470 true green 525 469 520 468 467 515 0 20 40 60 80 510 mA 120 0 20 40 60 80 If If Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (T ) Maximal zulassiger Durchlassstrom Max. Permissible Forward Current I F = f (T ) OHL01846 25 OHL01847 25 mA mA IF IF 20 blue true green 15 20 blue true green 15 10 10 5 5 TA temp. ambient TS temp. solder point 0 mA 120 0 20 40 60 0 80 C 100 20 40 60 80 C 100 T T 2012-06-15 0 8 LB A673, LT A673 Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C LB 0.25 IF A Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C LB OHL01973 tP 0.25 IF A tP IF D= T T OHL01974 tP 0.10 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp Zulassige Impulsbelastbarkeit IF = f (tp) Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C LT Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C LT OHL01975 t D = TP 0.30 IF A tP IF T 0.05 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.15 0.10 0.05 IF T 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2012-06-15 t D = TP D= D= 0.10 OHL01976 tP 0.20 0.20 0.15 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.15 0.05 0.30 IF A T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.10 IF D= T D= 0.15 tP 9 LB A673, LT A673 Mazeichnung8) Seite 16 Package Outlines8) page 16 1.1 (0.043) (2.85 (0.112)) 0.9 (0.035) Anode (1.4 (0.055)) (R1) 3.8 (0.150) 3.4 (0.134) (2.9 (0.114)) Cathode marking 2.54 (0.100) spacing (0.3 (0.012)) Cathode 0.7 (0.028) 4.2 (0.165) 3.8 (0.150) 2.4 (0.094) 2.8 (0.110) (2.4 (0.094)) C A 4.2 (0.165) 3.8 (0.150) GPLY6880 Korrosionsfestigkeit besser als EN 60068-2-60 (method 4): mit erweitertem Korrosionstest: 40C / 90%rh / 15ppm H2S / 336h Corrosion robustness better than EN 60068-2-60 (method 4): with enhanced corrosion test: 40C / 90%rh / 15ppm H2S / 336h Kathodenkennung: Cathode mark: Gewicht / Approx. weight: abgeschragte Ecke bevelled edge 67 mg Gurtung / Polaritat und Lage8) Seite 16 Method of Taping / Polarity and Orientation8) page 16 Verpackungseinheit 2000/Rolle, o330 mm Packing unit 2000/reel, o330 mm 4 (0.157) 2012-06-15 8 (0.315) 10 12 (0.472) 1.75 (0.069) Cathode/Collector Marking 5.5 (0.217) 4.25 (0.167) 2 (0.079) 3.95 (0.156) 1.5 (0.059) OHAY2273 LB A673, LT A673 Empfohlenes Lotpaddesign8) Seite 15 Recommended Solder Pad8) page 15 Reflow Loten Reflow Soldering 3.0 (0.118) 3.7 (0.146) 1.2 (0.047) Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation Cu-Flache > 16 mm 2 Cu-area > 16 mm 2 Lotstopplack Solder resist OHLPY965 2012-06-15 11 LB A673, LT A673 Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering (nach J-STD-020D.01) (acc. to J-STD-020D.01) OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 250 s 300 t Profile Feature Pb-Free (SnAgCu) Assembly Recommendation Max. Ratings Ramp-up Rate to Preheat*) 25C to 150C 2C / sec 3C / sec Time ts from TSmin to TSmax (150C to 200C 100s min. 60sec max. 120sec Ramp-up Rate to Peak*) 180C to TP 2C / sec 3C / sec Liquidus Temperture TL 217C Time tL above TL 80sec max. 100sec Peak Temperature TP 245C max. 250C Time tP within 5C of the specified peak temperature TP - 5K 20sec min. 10sec max. 30sec Ramp-down Rate* TP to 100C 3K / sec 6K / sec maximum Time 25C to Peak temperature max. 8 min. All temperatures refer to the center of the package, measured on the top of the component * slope calculation T/t: t max. 5 sec; fulfillment for the whole T-range 2012-06-15 12 LB A673, LT A673 Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors RoHS Compliant (6P) BATCH NO: 1234567890 ML Temp ST 2 260 C R (1T) LOT NO: 1234567890 (9D) D/C: 1234 Pack: R18 DEMY 022 B_R999_1880.1642 R (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X OHA04563 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm 400 mm Leader: Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 12 + 0.3 - 0.1 4 0.1 8 0.1 2 0.05 1.5 + 0.1 1.75 0.1 5.5 0.05 (0.157 0.004) (0.315 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.217 0.002) Reel dimensions in mm (inch) A 330 (13) 2012-06-15 W Nmin W1 W2 max 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 13 LB A673, LT A673 Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print L VE el LE . see lab e H) nk, (R bla cod y If bar . dit RH mi % hu e ve /60 ed ag C ati rar ck rel 30 _ inf pa < % to ak of 90 urs d ). < ns (pe or urs d , Ho de cte itio Ho urs an bje ing C co 72 nd Ho urs 5 te C su ss 48 e Ho co ce 24 6 da e y 40 be tim C h l pro < tor tim e e or ). 23 tim at t wilnt l wit or fac C Flo s tim at or ca at re. Flo d tha ale el or nth nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic 5a is be de tin en 24 de , or pro ve l 6 Le e te co , g: un wh Le ve l ke r se da ba ed low ure Le ve mo % ba e ba al d Le ist ure en ref e e 10 ure tim for se ist ale op se for > se , Mo ure 3 ist is or . , is ha se Mo be nk ist nk rd g -03 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. s wi 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. dy d e 4 8 ref y is req 2. JE bo e Mo ore tim 16 req : C/ es dit2b a) tim e e St or mi IP ed or g is tim vic b) e Hu en Flo oror tim De 2a kin nc te Flo op a) 3. b) baere Flo or da e l 1 2 Flo If al ref tim ve l 2a 4. se d ve l 3 Le g an ve l Le Ba te ure Le ve Le ist ure Da ist ure Mo ure Mo istist Mo Mo Barcode label N RS ins VE ITI TO nta NSUC TIO U g coSEND CO Ais baRE TU MI CThIS SE MO TO OP M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OS R Desiccant OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label BA P) (6 M Y DE R 18 -1 -1 +Q P RO UP : G 01 4 C: D/ D EM Y 18 R -1 : Q + P -1 G R O U P: u L lt S iT Y O T6 P 7 L 6 TY :2 AM 00 0 (9 D ) D /C :0 14 4 (G ) E Bi D Bi n1 Bi n2 : Pn3 : Q 1: -1 20 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R ditio 0 C R 07 PA 7 na RT l TE C KV XT AR (X ) PR O D NO : 20 00 (9 D) T LO (1 T) 5 14 2 110 0 (Q )Q TY : O TC 4 998 H 12 34 S S em R ic AM o n O d u p ct to o H rs NO 21 2100 )Q (X ) PR O D N O : (1 T) 11 00 LO T 14 2 N O 5 O SR (Q A 21 00 21 99 8 R ic N O : H 12 G O S em BA TC H 23 :1 (6 P) S 34 o M n O d u p cto to rs M M : el 23 G e Muster C (G ) M u L lt S iT Y O T6 P 7 L 6 E D Muster L NO :1 E V E L selab . , H) nk de co (R bla r If ba . ity id RH m hu 0% e e /6 d tiv C re ag la re fra ck 30 _ < in pa % k s of to 90 ea s ur d ). < ns or te (p d Ho ururs s , de g itio Ho an bjec co C 72 sin nd Ho ur 5 te 48 C su es e Ho co 24 6 da y 40 be oc tim e e C or ThISTU th r pr < ll tim SE ct ). O 23 oo r wi nt tim e at l wi fa r M O Fl oo tim s at at le C at e. ica PT l Fl th th va oo r ur O nt Fl oo s ui be on if: read w ed l 4 5 Fl la m ide ce eq lo g, oc ve l vi is in en de be 24 de or l 5a6 pr Le ve nt wh e te co , w, g: ve l Le ke r re ou se da ba ed flo Le ve tu re m % ba e ba al e Le r en re e ed re 10 ois stu ur e tim se fo al op se fo > , M oi r se st ur 3 is is ha se M oi st nk be k, oo . 03 rd g M oi in an in Fl RH g, r-p bla DM ba Ca po If bl th % kinr life is (if . ar ST f p. wi et va to 10 ar ba Jks s el r th Ye m _ < cat m d, C ed 1 Ye ee ur iredi Sh te w, te at nt > 1 W Ho Af flody qu In no ire DE 1. e ou 4 8 re ed re qu JE 2. bo ity is M or tim e e 16 re C/ : es id 2b r a) St tim m IP ed oo r or g is tim e vic b) e r Hu Fl oo en tim De 2a kin nc te Fl oo r a) op 3. b) ba re Fl oo da e fe l 1 Fl If al re tim ve l 2 4. se d l 2a3 Le ve g an ve l e Le Ba te ur e Le ve Le Da oist stur e ur e M oi st ur M oi st M oi Nns IVE RS ai IT TO ntNS UC TIO ND U g coSE O Ais baRE IC M Q : -1 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R0 ditio 0 C R PA 77 na RT l TE CK VA XT R: Bi Bi n1 Bi n2 : Pn3 : 120 Barcode label Packing Sealing label Dimensions of transportation box in mm (inch) Breite / Width 200 5 (7,874 0,1968) 2012-06-15 Lange / length Hohe / height 200 5 (7,874 0,1968) 30 5 (1,1811 0,1968) 14 OHA02044 LB A673, LT A673 Revision History: 2012-06-15 Previous Version: 2012-03-16 Page Subjects (major changes since last revision) Date of change 4 Forward voltage 2006-04-04 7 Forward Current 2006-04-04 2, 4, 5 OS-PCN-2006-024-A 2006-10-16 1, 10 Additional information 2009-12-07 13 OS-IN-2010-032 2010-10-04 all Final datasheet created 2010-12-03 12 OS-PCN-2012-008 2012-03-16 10 OS-IN-2012-017 2012-06-15 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components9) page 16 may only be used in life-support devices or systems10) page 16 with the express written approval of OSRAM OS. 2012-06-15 15 LB A673, LT A673 Remarks: Brightness values are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 8 % and an expanded uncertainty of +/- 11 % (acc. to GUM with a coverage factor of k = 3). 2) Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 3) Driving the LED in reverse direction is suitable for short term application. 4) RthJA results from mounting on PC board FR 4 (pad size 16 mm2 per pad) 5) The dominant wavelength is measured at a current pulse of typical 25 ms, with an internal reproducibility of +/- 0,5 nm and an expanded uncertainty of +/- 1 nm (acc. to GUM with a coverage factor of k=3). 6) The forward voltage is measured during a current pulse of typical 8 ms, with an internal reproducibility of +/- 0,05 V and an expanded uncertainty of +/- 0,1 V (acc. to GUM with a coverage factor of k=3). 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Dimensions are specified as follows: mm (inch). 9) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 10) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. Funoten: 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 1) Helligkeitswerte werden wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 8 % und einer erweiterten Messunsicherheit von +/- 11 % gemessen (gema GUM mit Erweiterungsfaktor k = 3). Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. Die LED kann kurzzeitig in Sperrichtung betrieben werden. RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 16 mm2 je Pad) Die dominante Wellenlange wird wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 0,5 nm und einer erweiterten Messunsicherheit von +/- 1 nm gemessen (gema GUM mit Erweiterungsfaktor k = 3). Vorwartsspannungen werden wahrend eines Strompulses einer typischen Dauer von 8 ms, mit einer internen Reproduzierbarkeit von +/- 0,05 V und einer erweiterten Messunsicherheit von +/- 0,1 V gemessen (gema GUM mit Erweiterungsfaktor k=3) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Mae werden wie folgt angegeben: mm (inch) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2012-06-15 16