MKP 1845 Vishay Roederstein Metallized Polypropylene Film Capacitor Related Document: IEC 60384-16 CAPACITANCE RANGE Dimensions in millimeters 1000 pF to 4.7 F FEATURES Product is completely lead (Pb)-free. Product is RoHS compliant. Od 40.0 5.0 L Max. 20 % (M), 10 % (K), 5 % (J) D Max. D 7.0 < 16.0 16.0 e3 CAPACITANCE TOLERANCES 40.0 5.0 RoHS COMPLIANT RATED VOLTAGES (UR): 160 VDC, 250 VDC, 400 VDC, 630 VDC, 1000 VDC, 1600 VDC, 2000 VDC Od 0.7 0.8 1.0 PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz 100 VAC, 160 VAC, 220 VAC, 400 VAC, 600 VAC, 650 VAC, 700 VAC TEST VOLTAGE (ELECTRODE/ELECTRODE) MAIN APPLICATIONS High voltage, high current and high pulse operations, deflection circuits in TV sets (S-correction and fly-back tuning). Protection circuits in SMPS's. Snubber and electronic ballast circuits. Input and output filtering in SPS designs, storage, timing and integrating circuits. 1.6 x UR for 2 s INSULATION RESISTANCE Measured at 100 VDC after one minute For C 0.33 F: 100000 M minimum value (150000 M typical value) TIME CONSTANT MARKING Manufacturer's logo/type/C-value/rated voltage/tolerance/ date of manufacture Measured at 100 VDC after one minute For C > 0.33 F: 30000 s minimum value (50000 s typical value) DIELECTRIC TEMPERATURE COEFFICIENT ELECTRODES CAPACITANCE DRIFT COATING DERATING FOR DC AND AC.CATEGORY VOLTAGE UC - 250 x 10-6/C (typical value) Polypropylene film Vacuum deposited aluminum Up to + 40 C, 0.5 % for a period of two years Metal-foil-wrapped, insulated, epoxy resin sealed, flame retardant CONSTRUCTION Extended double-sided metallized polyester film, internal series connection (630 to 2000 VDC), double-sided metallized polyester carrier film, (refer to general information) LEADS SELF INDUCTANCE ~ 12 nH measured with 6mm long leads PULL TEST ON LEADS 20 N in direction of leads according to IEC 60068-2-21 BEND TEST ON LEADS Tinned wire 2 bends through 90 C with half of the force used in pull test IEC TEST CLASSIFICATION RELIABILITY 55/100/56, according to IEC 60068 OPERATING TEMPERATURE RANGE - 55 C to + 100 C At + 85 C: UC = 1.0 UR At + 100 C: UC = 0.7 UR Operational life > 300000 h Failure rate < 10 FIT (40 C and 0.5 x UR) For further details, please refer to the general information available at www.vishay.com/?26033. MAXIMUM PULSE RISE TIME CAPACITOR LENGTH (MM) Maximum Pulse Rise Time dv/dt [V/s] 160 VDC 250 VDC 400 VDC 630 VDC 1000 VDC 17 900 1140 1840 -- -- 22 450 560 910 3430 -- 29 260 320 520 2120 2800 34 202 240 400 1524 2000 44 140 170 280 980 1280 If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted. Document Number: 26023 Revision: 07-Feb-06 For technical questions contact; dc-film@vishay.com 1600 VDC -- -- 3800 2680 1690 2000 VDC -- -- 6200 4200 2600 www.vishay.com 1 MKP 1845 Vishay Roederstein Metallized Polypropylene Film Capacitor Related Document: IEC 60384-16 DISSIPATION FACTOR TAN MEASURED AT 1 kHz C 0.1 F 0.3 x 10-3 0.1F < C 1.0 F 0.3 x 10-3 C > 1.0 F 0.3 x 10-3 10 kHz 0.4 x 10-3 0.4 x 10-3 - - - 100 kHz 1.5 x 10-3 Maximum values CAPACITANCE CAPACITANCE CODE D L D L D L D L 1000 pF - 210 - - - - - - - - 1500 pF - 215 - - - - - - - - 2200 pF - 222 - - - - - - - - 3300 pF - 233 - - - - - - - - 4700 pF - 247 - - - - - - - - 6800 pF - 268 - - - - - - - - 0.01 F - 310 - - - - 6.0 17.0 7.0 22.0 0.015 F - 315 - - - - 6.5 17.0 8.0 22.0 0.022 F - 322 - - 6.0 17.0 7.5 17.0 9.5 22.0 0.033 F - 333 6.0 17.0 7.0 17.0 7.0 22.0 9.0 29.0 0.047 F - 347 6.5 17.0 8.0 17.0 8.0 22.0 10.5 29.0 0.068 F - 368 7.5 17.0 7.0 22.0 9.0 22.0 12.5 29.0 0.1 F - 410 7.0 22.0 8.0 22.0 11.0 22.0 12.5 34.0 0.15 F - 415 8.0 22.0 9.5 22.0 10.0 29.0 15.0 34.0 0.22 F - 422 9.5 22.0 9.0 29.0 12.0 29.0 14.5 44.0 0.33 F - 433 9.0 29.0 10.5 29.0 13.5 29.0 17.5 44.0 0.47 F - 447 10.0 29.0 12.0 29.0 15.0 34.0 21.0 44.0 0.68 F - 468 12.0 29.0 13.0 34.0 17.5 34.0 25.0 44.0 1.0 F - 510 12.5 34.0 15.5 34.0 17.5 44.0 - - 1.5 F - 515 15.5 34.0 15.5 44.0 21.5 44.0 - - 2.2 F - 522 15.5 44.0 18.5 44.0 26.0 44.0 - - 3.3 F - 533 18.5 44.0 22.5 44.0 - - - - 4.7 F - 547 22.0 44.0 - - - - - VOLTAGE CODE 16 160 VDC/100 VAC VOLTAGE CODE 25 250 VDC/160 VAC VOLTAGE CODE 40 400 VDC/220 VAC VOLTAGE CODE 63 630 VDC/250 VAC Further C-values on request. pcm = L + 3.5. RECOMMENDED PACKAGING LETTER CODE TYPE OF PACKAGING REEL DIAMETER (mm) ORDERING CODE EXAMPLES G AMMO - MKP 1845-310-135-G X R REEL 350 MKP 1845-310-135-R X - BULK for L > 31.5 mm - MKP 1845-410-135 X www.vishay.com 2 For technical questions contact; dc-film@vishay.com Document Number: 26023 Revision: 07-Feb-06 MKP 1845 Vishay Roederstein Metallized Polypropylene Film Capacitor Related Document: IEC 60384-16 CAPACITANCE CAPACITANCE CODE VOLTAGE CODE 10 1000 VDC/600VAC VOLTAGE CODE 13 1600 VDC/650 VAC VOLTAGE CODE 20 2000 VDC/700 VAC D L D L D L 1000 pF - 210 - - - - 6.5 29.0 1500 pF - 215 - - - - 6.5 29.0 2200 pF - 222 - - - - 6.5 29.0 3300 pF - 233 - - - - 7.0 29.0 4700 pF - 247 - - - - 8.0 29.0 6800 pF - 268 - - - - 9.5 29.0 0.01 F - 310 6.5 29.0 8.0 29.0 11.0 29.0 0.015 F - 315 8.0 29.0 9.5 29.0 11.5 34.0 0.022 F - 322 9.0 29.0 11.0 29.0 13.0 34.0 0.033 F - 333 11.0 29.0 11.5 34.0 16.0 34.0 0.047 F - 347 11.0 34.0 13.5 34.0 15.0 44.0 0.068 F - 368 13.0 34.0 16.0 34.0 18.0 44.0 0.1 F - 410 15.5 34.0 15.0 44.0 21.0 44.0 0.15 F - 415 15.0 44.0 18.5 44.0 - - 0.22 F - 422 18.0 44.0 22.0 44.0 - - 0.33 F - 433 - - - - - - 0.47 F - 447 - - - - - - 0.68 F - 468 - - - - - - 1.0 F - 510 - - - - - - 1.5 F - 515 - - - - - - 2.2 F - 522 - - - - - - 3.3 F - 533 - - - - - - 4.7 F - 547 - - - - - - Further C-values on request. pcm = L + 3.5. RECOMMENDED PACKAGING LETTER CODE TYPE OF PACKAGING REEL DIAMETER (mm) ORDERING CODE EXAMPLES G AMMO - MKP 1845-310-135-G X R REEL 350 MKP 1845-310-135-R X - BULK for L > 31.5 mm - MKP 1845-410-135 X Document Number: 26023 Revision: 07-Feb-06 For technical questions contact; dc-film@vishay.com www.vishay.com 3 MKP 1845 Metallized Polypropylene Film Capacitor Related Document: IEC 60384-16 Vishay Roederstein 0. 1000 03 7 3 0. VRMS VRMS 100 04 5 7 0. 5 3 06 8 0. 1 0. 3 2 2 0. 22 4. 3 7 .3 2 .2 1 0 .5 1 .0 0 .33 .6 8 0. 7 5 3 2 160 VDC 04 7 0. 1 0. 15 47 0. 33 0 .2 2 3 2. 5 3 47 Capacitance in F 3. 2 0. 2 2 1.5 1. 0 0. 68 0 . 250 VDC 10 10 3 2 3 5 7 10 4 2 3 5 7 10 5 2 3 10 3 5 7 10 6 2 3 5 7 10 4 2 3 5 7 10 5 2 3 5 7 10 6 f [Hz] f [Hz] Permissible AC Voltage versus Frequency Permissible AC Voltage versus Frequency VRMS 1000 1000 VRMS 02 7 1 Capacitance in F 7 5 Capacitance in F 7 5 0. 01 3 3 0. 01 .0 22 0. 2 100 7 0 0.6 3 2 01 100 0. 7 7 0. 1 8 0.3 3 0.2 0 2 0. 5 0. 03 68 0. 2 3 3 5 0.06 8 33 0.1 5 3 2 15 400 VDC 0. 2 04 2. 1 2 .5 1 . 5 630 VDC 10 10 10 3 2 3 5 7 10 4 2 3 5 7 10 5 2 3 10 3 5 7 10 6 2 3 5 7 10 4 5 7 10 5 2 3 5 7 10 6 f [Hz] f [Hz] Permissible AC Voltage versus Frequency Permissible AC Voltage versus Frequency VRMS 1000 1000 VRMS 0. 100 15 10 Capacitance in F 7 Capacitance in F 7 0. 01 5 3 0. 2 04 7 01 0. 02 2 100 7 5 04 22 7 0. 1 5 0. 3 0. 7 0. 1 2 0. 2 0. 100 5 3 02 2 Capacitance in F 7 0. 22 3 2 1000 VDC 1600 VDC 10 10 10 3 2 3 5 7 10 4 2 3 5 7 10 5 2 3 5 7 10 6 f [Hz] Permissible AC Voltage versus Frequency www.vishay.com 4 10 3 2 3 5 7 10 4 2 3 5 7 10 5 2 3 5 7 10 6 f [Hz] Permissible AC Voltage versus Frequency For technical questions contact; dc-film@vishay.com Document Number: 26023 Revision: 07-Feb-06 MKP 1845 Metallized Polypropylene Film Capacitor Related Document: IEC 60384-16 Vishay Roederstein VRMS 1000 7 10 00 5 22 00 3 47 2 00 100 0. 01 7 0. 02 5 2 2 0. 3 04 2000 VDC Capacitance in pF and F 7 0. 1 10 10 3 2 3 5 7 10 4 2 3 5 7 10 5 2 3 5 7 10 6 f [Hz] 0.05 0.1 Impedance versus Frequency Z = f (f) (Lead length 6.0 mm) 160 VDC to 630 VDC Document Number: 26023 Revision: 07-Feb-06 5.0 10 50 100 f [MHz] 10 -3 0.01 0.05 0.1 0.5 1.0 Impedance versus Frequency Z = f (f) (Lead length 6.0 mm) 1000 VDC to 2000 VDC For technical questions contact; dc-film@vishay.com 0.01 F 0.047 F 0.022 F 0.1 F 1.0 F 2.2 F 1.0 F 2.2 F 0.5 1.0 10 -2 4.7 F 10 -3 0.01 4.7 F 10 -2 0.01 F 10 -1 0.047 F 0.022 F 10 -1 0.1 F 10 0 0.22 F 10 0 0.22 F 10 1 0.47 F Z [] 10 1 0.47 F Z [] Permissible AC Voltage versus Frequency 5.0 10 50 100 f [MHz] www.vishay.com 5 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000