3MTM Eurosocket Type C (Rows A & C or A, B & C Filled) 62CXX Series * * * * * DIN 41612 compatible High density (64 & 96 position) Mates with DIN 41612 Type C headers High reliability contact design Can be daisy-chained or end terminated to flat cable * Optional strain relief with handle * Individual connector coding with 3435-1 keying plug * See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: October 30, 2007 TS-0813-B Sheet 1 of 4 Physical Insulation Material: Glass Filled Polyester (PBT) Flammability: Color: Contact Material: Plating: Underplating: Wiping Area: Wire Accommodation: UL 94V-0 Gray Copper Alloy 50 [ 1.27 m ] Nickel 10 [ 0.25 m ] Gold 2 row version (A, C): Stranded or Solid: 26 & 28 AWG; Solid: 30 AWG 3 row version (A, B, C): Stranded or Solid: 30 AWG Marking: 3M Logo, Part Identification, and Contact Position Numbers Electrical Current Rating: 1 A Insulation Resistance: > 1 x 109 at 500 VDC Withstanding Voltage: 1000 VRMS at Sea Level Environmental Temperature Rating: -55C to +125C UL File No.: E68080 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Eurosocket Type C (Rows A & C or A, B & C Filled) 62CXX Series 6.80 [ .268 ] 86.10 [ 3.390 ] Material: Steel 10.60 [ .417 ] 86.4 [ 3.40 ] 10.95 [ .431 ] Non-Conductive Transfer Adhesive with Liner 1.27 Ref [ .050 ] 9.50 [ .374 ] Optional Mounting Flange (See Order Information) 1.27 Ref [ .050 ] 11.60 [ .457 ] 9.54 [ .376 ] 1.00 [ .039 ] 6.75 [ .266 ] 85.00 [ 3.346 ] 90.0 [ 3.54 ] C1 B1 8.51 [ .335 ] Without Mounting Flange Position 32 10.60 [ .417 ] 5.08 [ .200 ] Ref 2.54 [ .100 ] Ref Break Off Tab A1 8.51 [ .335 ] With Mounting Flange 5.0 [ .20 ] mm [Inch] Keying Tab (4) Tolerance Unless Noted 3435-1000 Keying Plug (Optional: Order Separately) Note: 1. Position B1 & C1 is terminated to the first conductor of the ribbon cable. Row of Contacts: 1 = A and C Mounting Flange Style: 0 = without 1 = with Interconnect Solutions http://www.3M.com/interconnects/ .000 For-1X00XX (no mtg flange) version only Strain Relief (Order Separately) 3448-6201 (RIA E1 & C1 apply) Optional Plating: EC = 30 " [0.76m] Au over 50 "-150 " [1.27 m-3.80 m] Ni (RIA E1 & C1 apply) Assembly tools: 3MTM Press 3640 (or equivalent), 3MTM Locator Plate, 3443-117, 3MTM Platen 3442-9 3M .00 .3 .13 [ ] Dimensions for Reference only Ordering Information Socket 62C64-1X0XXX .0 mm TS-0813-B Sheet 2 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Eurosocket Type C (Rows A & C or A, B & C Filled) 62CXX Series 6.80 [ .268 ] 86.10 [ 3.390 ] Material: Steel 10.60 [ .417 ] 86.4 [ 3.40 ] 10.95 [ .431 ] Non-Conductive Transfer Adhesive with Liner .847 Ref [ .033 ] .847 Ref [ .033 ] 9.50 [ .374 ] Optional Mounting Flange (See Order Information) 11.60 [ .457 ] 9.54 [ .376 ] 1.00 [ .039 ] 6.75 [ .266 ] 85.00 [ 3.346 ] Without Mounting Flange 90.0 [ 3.54 ] C1 8.51 [ .335 ] Position 32 10.60 [ .417 ] 5.08 [ .200 ] Ref 8.51 [ .335 ] 2.54 [ .100 ] Ref A1 With Mounting Flange Break Off Tab 5.0 [ .20 ] mm [Inch] Keying Tab (4) 3435-1000 Keying Plug (Optional: Order Separately) Socket 62C96-120XXX Mounting Style: 0 = without Mounting Flange 1 = with Mounting Flange Interconnect Solutions http://www.3M.com/interconnects/ mm .00 .000 For-1200XX (no mtg flange) Strain Relief version only (Order Separately) 3448-6201 (RIA E1 & C1 apply) Optional Plating: EC = 30" [0.76m] Au over 50"-150" [1.27m-3.80m] Ni (RIA E1 & C1 apply) Assembly tools: 3MTM Press 3640 (or equivalent), 3MTM Locator Plate 3443-117, 3MTM Platen 3442-9 3M .0 .3 .13 [ ] Dimensions for Reference only Note: 1. Position C1 is terminated to the first conductor of the ribbon cable. Ordering Information Tolerance Unless Noted TS-0813-B Sheet 3 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Eurosocket Type C (Rows A & C or A, B & C Filled) 78.74 [ 3.100 ] 62CXX Series 7.96 [ .313 ] Minimum spacing between adjacent groups of posts when using a strain relief 2.54 [ .100 ] 7.62 [ .300 ] 5.08 [ .200 ] Minimum space required for connector and cable Minimum spacing between adjacent groups of posts 86.7 [ 3.41 ] 8.2 [ .32 ] Recommended Post Pattern 0.70 X 0.6 or [ .028 X .024 ] 0.63 X 0.63 [ .025 X .025 ] Square Post (Nominal) 4.20 Min [ .165 ] Rectangular Post (Nominal) mm [Inch] Tolerance Unless Noted .0 mm .00 .000 .3 .13 [ ] Dimensions for Reference only Note: 1. Ends of posts to be located within 0.25 [ .01 ] TPD at post end. 3M Interconnect Solutions http://www.3M.com/interconnects/ TS-0813-B Sheet 4 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. RIA-2217B-c Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217B-c Appendix C3: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Interconnect Products 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. (c) 3M 2007. All rights reserved. RIA-2217B-c 3M is a trademark of 3M Company.