3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering inform at io n call
800-225-5373
3M™ Eurosocket
Type C (Rows A & C or A, B & C Filled) 62CXX Series
Physical
Electrical
Environmental
Insulation
Material: Glass Filled Polyester (PBT)
Flammability: U L 94 V-0
Color: Gray
Contact
Material: Copper Alloy
Plating:
Underplating: 50 μ″ [ 1.27 μm ] Nickel
Wiping Area: 10 μ″ [ 0.25 μm ] Gold
Wire Accommodation: 2 row version (A, C): Stranded or Solid: 26 & 28 AW G; Solid: 30 AWG
3 row version (A, B, C): Stranded or Solid: 30 AWG
Marking: 3M Logo, Part Identif icat i on, and Contact Position Numbers
Current Rating: 1 A
Insulation Resistance: > 1 × 109Ω at 500 VDC
Withstanding Voltage: 1000 VRMS at Sea Level
Temperature Rating: -55°C to +125°C
TS-0813-B
Sheet 1 of 4
• DIN 41612 compatible
• High density (64 & 96 position)
• Mates with DIN 41612 Type C headers
• High reliability contact design
• Can be daisy-chained or end terminated to flat
cable
• Optional strain relief with handle
• Individual connector coding with 3435-1
keying plug
• See Regulatory Information Appendix (RIA)
for chemical compliance information
Date Modified: October 30, 2007
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Eurosocket
Type C (Rows A & C or A, B & C Filled) 62CXX Series
TS-0813-B
Sheet 2 of 4
mm
[Inch]
mm
Tolerance Unless Noted
[ ] Dimensions for
Reference only
± .13 ± .3
.000.00
.0
Note:
1. Position B1 & C1 is terminated to the first conductor of the ribbon cable.
Ordering Information
Socket
62C64-1X0XXX
Strain Relief
(Order Separately)
3448-6201
Row of Contacts:
1 = A and C Mounting Flange Style:
0 = without
1 = with
For-1X00XX
(no mtg flange)
version only
9.50
[ .374 ]
86.10
[ 3.390 ]
Material: Steel
6.80
[ .268 ]
10.60
[ .417 ]
86.4
[ 3.40 ]
10.95
[ .431 ]
Non-Conductive Transfer
Adhesive with Liner
Optional Mounting Flange
(See Order Infor mation)
9.54
[ .376 ]
8.51
[ .335 ]
1.27 Ref
[ .050 ]
1.27 Ref
[ .050 ]
11.60
[ .457 ]
1.00
[ .039 ]
6.75
[ .266 ]
85.00
[ 3.346 ]
C1 Position 32 Without Mounting
Flange
10.60
[ .417 ]
With Mounting
Flange
8.51
[ .335 ]
2.54 [ .100 ] Ref
A1
5.08
[ .200 ]
Ref
5.0
[ .20 ]
Break Off Tab
3435-1000
Keying Plug
(Optional: Order Separately)
Keying Tab (4)
B1
90.0
[ 3.54 ]
Assembly tools: 3M™ Press 3640 (or equivalent), 3M™ Locator Plate, 3443-117, 3M™ Platen 3442-9
Optional Plating:
EC = 30 µ" [0.76µm] Au over 50 µ"-150 µ"
[1.27 µm-3.80 µm] Ni (RIA E1 & C1 apply)
(RIA E1 & C1 apply)
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Eurosocket
Type C (Rows A & C or A, B & C Filled) 62CXX Series
TS-0813-B
Sheet 3 of 4
Ordering Information
Note:
1. Position C1 is terminated to the first conductor of the ribbon cable.
Socket
62C96-120XXX Strain Relief
(Order Separat ely)
3448-6201
Mounting Style:
0 = without Mounting Flange
1 = with Mounting Flange
For-1200XX
(no mtg flange)
version only
86.10
[ 3.390 ] 6.80
[ .268 ]
Material: Steel
86.4
[ 3.40 ]
10.95
[ .431 ]
10.60
[ .417 ]
Non-Conductive Transfer
Adhesive with Liner
Optional Mounting Flange
(See Order Information)
11.60
[ .457 ]
1.00
[ .039 ] 85.00
[ 3.346 ]
6.75
[ .266 ]
9.50
[ .374 ]
9.54
[ .376 ]
8.51
[ .335 ]
Without Mounting
Flange
10.60
[ .417 ]
8.51
[ .335 ]
With Mounting
Flange
2.54 [ .100 ] Ref
5.08
[ .200 ]
Ref
A1
C1 Position 32
.847 Ref
[ .033 ]
.847 Ref
[ .033 ]
5.0
[ .20 ]
Break Off Tab
3435-1000
Keying Plug
(Optional: Order Separately)
Keying Tab (4)
90.0
[ 3.54 ]
mm
[Inch]
mm
Tolerance Unless Noted
[ ] Dimensions for
Refere nce only
± .13 ± .3
.000.00
.0
Assembly tools: 3M™ Press 3640 (or equivalent), 3M™ Locator Plate 3443 -117, 3M™ Platen 3442 -9
Optional Plating:
EC = 30µ" [0.76µm] Au over 50µ"-150µ"
[1.27µm-3.80µm] Ni (RIA E1 & C1 apply)
(RIA E1 & C1 apply)
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Eurosocket
Type C (Rows A & C or A, B & C Filled) 62CXX Series
TS-0813-B
Sheet 4 of 4
mm
[Inch]
mm
Tolerance Unless Noted
[ ] Dimensions for
Reference only
± .13 ± .3
.000.00
.0
Note:
1. Ends of posts to be located within 0.25 [ .01 ] TPD at post end.
0.70 X 0.6
[ .028 X .024 ] 0.63 X 0.63
[ .025 X .025 ]
Rectangular Post
(Nominal)
Square Post
(Nominal)
or
4.20 Min
[ .165 ]
7.62
[ .300 ]
Recommended Post Pattern
86.7
[ 3.41 ] 8.2
[ .32 ]
Minimum spacing
between adjacent
groups of posts
5.08
[ .200 ]
Minimum space
required for
connector and
cable
Minimum spacing between
adjacent groups of posts
when using a strain relief
7.96
[ .313 ]
78.74
[ 3.100 ]
2.54
[ .100 ]
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-c
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part does not contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217B-c
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
Please recycle. Printed in USA.
© 3M 2007. All rights reserved.
RIA-2217B-c
3
3M Electronics
Interconnect Products
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3m.com/interconnects 3M is a trademark of 3M Company.
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
