Condor Todd Power Rack Systems and Hot Swap Power Supplies CPCI and DPCI Standard Series Hot Swap Power Supplies Features c c c c c c Fully Compliant with PICMG CompactPCI Specification Forced Current Sharing and Internal OR-ing Diodes for N+1 Redundancy High Current 5 V and 3.3 V Outputs 150 W in 3 U 8 HP, 350 W in 6 U 8 HP CompactPCI Package Requiring only 15 cfm of External Air Universal AC Input with Power Factor Correction 48 VDC Input Version and AC Universal Input Version Available Both the CPCI and DPCI standard series have current sharing, internal Or-ing diodes and a hot plug input/output/signal connector providing a standalone redundant power solution. Compatible AC and DC units allow standardization of system mechanicals on a single power supply series. CPCI Series N AC Input The CPCI series of high reliability power supplies are designed for telecommunications and industrial systems requiring redundancy and modularity. These low-cost, high density units meet the electrical and mechanical requirements of the PICMG specifications for CompactPCI systems. Connector: 47 pin modular, except where noted. EACH Stock No. Mfr.Os Type Power (Watts) Output 1 Output 2 Output 3 Output 4 1-4 5-24 25-49 50-Up 744-8429 744-8500 744-8431 744-8525 CPCI-154-1203 CPCI-204-1203 CPCI-354-1203* CPCI-354T-1203 150 200 350 350 5 V @ 25 A 5 V @ 25 A 5 V @ 50 A 5 V @ 50 A 3.3 V @ 20 A 3.3 V @ 30 A 3.3 V @ 40 A 3.3 V @ 40 A 12 V @ 5.5 A 12 V @ 5.5 A 12 V @ 12 A 12 V @ 12 A 12 V @ 0.5 A 12 V @ 0.5 A 12 V @ 4.0 A 12 V @ 4.0 A 346.00 340.05 559.00 559.00 335.78 329.26 538.00 538.00 323.00 317.45 519.00 519.00 312.00 306.66 489.00 489.00 DPCI Series N DC Input The DPCI series of high reliability power supplies are designed for DC input systems, telecommunications and industrial equipment requiring redundancy and modularity. These low-cost, high-density units meet the electrical and mechanical requirements of the PICMG specification for CompactPCI systems. 744-8433 744-8510 744-8435 744-8520 DPCI-154-1203 DPCI-204-1203 DPCI-354-1203* DPCI-354T-1203 150 200 350 350 5 V @ 25 A 5 V @ 25 A 5 V @ 50 A 5 V @ 50 A 3.3 V @ 20 A 3.3 V @ 30 A 3.3 V @ 40 A 3.3 V @ 40 A 12 V @ 5.5 A 12 V @ 5.5 A 12 V @ 12 A 12 V @ 12 A 12 V @ 0.5 A 12 V @ 0.5 A 12 V @ 4.0 A 12 V @ 4.0 A 346.00 346.00 559.00 559.00 335.00 335.00 538.00 538.00 323.00 323.00 519.00 519.00 312.00 312.00 489.00 489.00 *38 pin modular. Combined current on outputs 1 and 2 not to exceed 25 A for 150 watt, 35 A for 200 watt and 65A for 350 watt units. 1000 W Single Output Power Supplies Features c c c c c c c 1000 W Power Factor Corrected Single Output, Hot Swappable Diode Isolated Output for Hot Swap OZero WireO Slope Program Current Sharing High Power Density 6.5 W/Cu. In. Industry Standard DIN Connector c c c c c c 0.99 Typical Power Factor DC Power Good and AC Power Fail Signals True Remote Inhibit Monotonic Turn-On and Turn-Off Extended Temperature Operation High Efficiency 87% Typical (48 V Units) The 1000 W TCM series hot swappable power supplies deliver remarkable economy and reliability in applications that require redundancy over extended temperature ranges. These high-density, single-output supplies are available with a front panel and handle for use in subsystems racks or without handles for embedded applications. Power factor correction, OR-ing diodes, and current sharing make the TCM series an ideal choice for communications and data processing systems utilizing distributed power or redundant power architecture. Specifications. Dimensions: 13.27" 4.87" 2.49". Weight: 5.2 Lbs. Operating Temperature Range: 20C to +60C. 12 EACH Stock No. Mfr.Os Type Power (Watts) Output 744-8417 744-8419 744-8421 TCM-1000-24 TCM-1000-28 TCM-1000-48 1000 1000 1000 24 V @ 41.6 A 28 V @ 35.7 A 48 V @ 20.8 A 1-4 5-24 25-49 50-Up 812.00 812.00 812.00 788.00 788.00 788.00 765.00 765.00 765.00 740.00 740.00 740.00 1200 W Single Output Power Supplies Features c c c c c c 1200 W Power Factor Corrected Single Output, Hot Swappable Diode Isolated Output for Hot Swap OZero WireO Slope Program Current Sharing for Redundancy High Power Density 5 W/Cu. In. c c c c c c Industry Standard DIN Connector Universal AC Input 0.99 Typical Power Factor DC Power Good and AC Power Fail Signals True Remote Inhibit Monotonic Turn-On and Turn-Off The SPH-1200 series provides low-cost, highly reliable, N+1 redundant hot swap power for critical applications. These 1200 W single output power supplies include an integral fan and are available with a front panel and handle for front access in sub-system racks or without handles for embedded applications. Power factor correction, OR-ing diodes, and current sharing make the SPH series an ideal choice for communications and data processing systems utilizing distributed power or redundant power architecture. Dimensions: 13.44" 5.00" 4.03". Weight: 7.3 lbs. Stock No. Mfr.Os Type Power (Watts) Output 744-8423 744-8425 744-8427 SPH-1200-24 SPH-1200-28 SPH-1200-48 1200 1200 1200 24 V @ 50 A 28 V @ 42 A 48 V @ 25 A EACH 1-4 5-24 25-49 50-Up 863.00 863.00 863.00 840.00 840.00 840.00 819.00 819.00 819.00 796.00 796.00 796.00 TRS Power Supply 19" Rack System for TCM and SPH Series Features c c c c N+1 Redundancy Front Access Hot Pluggability Up to 6 kW in One 3 U (5 1/4") Rack c Field Configurable c Single Phase or 3 Phase Input c Blank Filler Panels Available Consult factory for value added instrumentation and custom paint color options. Racks and power supplies are shipped separately. 690 b ALLIED EACH Stock No. Mfr.Os Type Panel Height Mounts Dimensions Power Supply Modules 1-4 5-24 25-49 50-Up 744-8437 744-8439 744-8441 TRS-3-3 TRS-2-3 TRS-3-6 3 U (51/ 4O) 2 U (31/ 2O) 3 U (51/ 4O) 1 to 3 modules 1 to 3 modules 1 to 6 modules 17" 3 U 15.12" 17" 2 U 15.12" 17" 3 U 15.12" SPH 1200 TCM 1000 TCM 1000 454.00 454.00 629.00 437.00 437.00 580.62 421.00 421.00 539.14 405.00 405.00 516.99 For Local Personalized Service Call 1-800-433-5700