DKE10 10W DC-DC Regulated Dual Output Converter E 1/2 E E E E E E E E E E E series Features : 2:1 wide input range 4:1 wide input range(option) 1000VDC I/O isolation 3000VDC I/O isolation(option) Built-in EMI filter Protections: Short circuit / Overload Cooling by free air convection Six-sided shield metal case 100% burn-in test Low cost / High reliability Approvals: FCC / CE 2 years warranty SPECIFICATION ORDER NO. DKE10A- DKE10B- DKE10C- DKE10A- DKE10B- DKE10C- DKE10A- DKE10B- DKE10C- DKE10A- DKE10B- DKE10C05 05 05 12 12 12 15 15 15 24 24 24 5V 12V 15V 24V O O100 ~ O1000mA DC VOLTAGE CURRENT RANGE RIPPLE & NOISE (max.) Note.2 50mVp-p LINE REGULATION O0.3% Note.4 O0.5% O2.0% VOLTAGE ACCURACY 60mVp-p 60mVp-p 80mVp-p 250KHz min. SWITCHING FREQUENCY VOLTAGE RANGE A: 9 ~ 18VDC B: 18 ~ 36VDC C: 36 ~ 72VDC 81% 78% 80% 82% 80% EFFICIENCY (Typ.) DC CURRENT Full load A: 1100mA B: 530mA C: 270mA No load A: 30mA C: 8mA B: 16mA 83% Pi network Fuse recommended OVER CURRENT 160% ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 82% 81% 85% All output equipped with short circuit SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed J (Refer to output load derating curve) WORKING TEMP. -25 ~ +71 WORKING HUMIDITY 20% ~ 90% RH non-condensing J J ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE -25 ~ +105 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes EMC Compliance to EN55022 Class B, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A 500Khrs min. MIL-HDBK-217F(25 ) O J I/P-O/P:1KVDC I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH J EMC EMISSION EMC IMMUNITY OTHERS 82% 80% 80% FILTER PROTECTION PROTECTION (Note. 5) O O21 ~ O210mA Note.3 LOAD REGULATION INPUT O O33.3 ~ O333mA 10W RATED POWER OUTPUT O O42 ~ O420mA J MTBF DIMENSION 50.8*25.4*11.2mm or 2"*1"*0.44" inch (L*W*H) WEIGHT 32g Derating Curve Pin Configuration Mechanical Specification Unit: mm 50.8 11.27 4 2 5 BOTTOM VIEW r + 0.2/-0.1 10.2 10.2 1 2.5 5.1 10.1 25.4 3 5.8 Pin No. Output 1 2 3 4 5 + Vi n - Vi n + Vo u t COM - Vo u t 100 LOAD (%) 20.3 2.5 15.3 80 1.0 -25 0 25 50 60 71 Ta ( NOTE J) 100 J 1.All parameters are specified at normal input, rated load, 25 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 10% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. File Name:DKE10-SPEC 2012-07-18 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Mean Well: DKE-10A-24 DKE10A-05 DKE10A-12 DKE10A-15 DKE10B-12 DKE10B-15 DKE10B-24 DKE10C-05 DKE10C-12 DKE10C-15