PCTL-300 REVISIONS NOTES: DRAWING NO. REV DESCRIPTION DATE ECO APPR THIRD ANGLE PROS. @ GA RELEASE TO MFG. Vtyfoo\ 43430 [CPM |. APPROVED SOURCE: IDEAL INDUSTRY BECKER PLACE SYCAMORE, ILL. 60178 P/N# = 01-1083-3 OUR P/N#- PCTL-300 S an L S SCALE 2.000 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES AND TOLERANCES ARE: MATERIAL DRAWN DATE TITLE Am h e n 0 | 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES . . +.015 (0,381 mm) 4.005 (0,127 mm) +1 C. McGRATH 13-Jul-00 p NOTICE - These drawi ificati ther dota (1) d in th ENGINEER DATE Amphenol Corporation - These drawings, specifications, or other data are, and remain the : property of Amphenol Corp. (2) must be returned upon request; and (3) are T. AUBIN 13-Jul-00 HE X D | E SET Communi cat ron and Network confidential and not to be disclosed to any person other than those to whom they REFERENCE | 00 429 ? | 3 Products Division are given by Amphenol Corp. The furnishing of these drawings, specifications, or FAR 967582-0 APPR D DATE . > yo Danbury, CT U.S.A. 06810 other data by Amphenol Corp., or to any other person to anyone for any purpose is GEN# TOOL _DIESETI CL WA not to be regarded by implication or otherwise in any manner licensing, granting - . CHS fe g SCALE: 3.0:1 | SHEET | OF | ants perm iag such bolt or anyother peront fomanefaare eter elf any cxD FIUE CODE 10 WS STZEPRAWING NO: meV or disclosed by said drawings, specifications, or other data. 1: \TOOL -PARTS\PCTL - 300 14868 B PCTL ~ 300 A