© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 9/28/2011 1
One WORLD One Brand One Strategy One Focus One Team One KEMET
Benets
• Approvals: ENEC, UL, cUL
• Rated Voltage: 275VAC 50/60Hz
• Capacitance Range: 0.001–0.6µF
• Pitch: 10.2–25.4 mm
• Capacitance Tolerance: ± 20% standard, ± 10% option, ± 5%
on request
• Climatic category 40/110/56, IEC 60068-1
• Tape and reel in accordance with IEC 60286-2
• RoHS compliant and lead-free terminations
• Operating temperature range of -40˚C to +110˚C
• 100% screening factory test at 2150VDC
• The highest possible safety regarding active and passive
ammability
• Excellent self-healing properties ensure long life even when
subjected to frequent overvoltages
• Good resistance to ionization due to impregnated dielectric
• High dU/dt capability
• The impregnated paper ensures excellent stability and
outstanding reliability properties, especially in applications with
continuous operation
Applications
For worldwide use in electromagnetic interference suppression in
all X2 and across-the-line applications.
Construction
Multilayer metallized paper, encapsulated and impregnated in
self-extinguishing material meeting the requirements of UL 94V-0.
EMI Suppressors Impregnated Paper
PME271M EMI Capacitors Class X2, 275VAC
Ordering Information
PME271 M(B) 510(0) MR30
Series Rated Voltage Pitch Capacitance Code
(pF)
Capacitance
Tolerance Packing Option
and Leadform
X2, Metallized Polyester M = 275VAC
N = 660VAC
B = 15.0
D = 22.5
F = 27.5
R = 37.5
Digits 2-4(3) indicates the rst three
digits of the capacitance value.
First digit indicates the total number
of digits in the capacitance value.
J = ±5%
K = ±10%
M = ±20%
see Ordering Options
Table
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 9/28/2011 2
EMI Suppressors Impregnated Paper – PME271M EMI Capacitors Class X2, 275VAC
Ordering Options Table
Standard
Packaging Style
Lead
Length Ordering
Code
(mm)
Ammo Pack R17TA
Tape & Reel 360 mm R17T0
Tape & Reel 500 mm R17T1
Loose, Short Leads 4+0/-1 R04
Loose, Long Leads 17+0/-1 R17
Loose, Long Leads 30+5 R30
Other options available on request
Dimension Table
Pitch Outer Dimension
B H L
10.2
3.9
7.5
13.5
10.2
4.1
8.2
13.5
10.2
5.1
10.5
13.5
15.2
5.2
10.5
18.5
15.2
6
12.5
18.5
15.2
7.3
13
18.5
15.2
7.8
13.5
18.5
15.2
8.5
14.3
18.5
20.3
7.6
14
24
20.3
9
15
24
20.3
11.3
16.5
24
22.5
8
17
27
22.5
10
19
27
22.5
12
22
27
25.4
10.5
17
30.5
25.4
10.5
17.3
30.5
25.4
12.1
19
30.5
25.4
15.3
22
30.5
Leadspacing Table
pd std l max l
10.2 ± 0.4 0.6 30 30
15.2 ± 0.4 0.8 30 30
20.3 ± 0.4 0.8 30 30
22.5 ± 0.4 0.8 30 30
25.4 ± 0.4 1.0 30 30
Tolerance in Lead
Length
< 30mm +0 / -1
30mm +5 / -0
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 9/28/2011 3
EMI Suppressors Impregnated Paper – PME271M EMI Capacitors Class X2, 275VAC
Technical Data
Rated Voltage 275VAC 50/60Hz
Capacitance Range 0.001–0.6µF
Capacitance Tolerance ± 20% standard, ± 10% option, ± 5% on request
Temperature Range -40 to +110°C
Climatic Category 40/110/56
Approvals ENEC, UL, cUL
Dissipation Factor
Maximum Values at +23°C
1 kHz 1.3%
Test Voltage Between
Terminals
The 100% screening factory test is carried out at
2150VDC. The voltage level is selected to meet the
requirements in applicable equipment standards. All
electrical characteristics are checked after the test. It is not
permitted to repeat this test as there is a risk to damage
the capacitor. KEMET is not liable in such case for any
failures.
Insulation Resistance
C ≤ 0.33 µF: ≥ 12 000 MΩ
C > 0.33 µF : ≥ 4 000 s
In DC applications Recommended Voltage ≤ 630 VDC
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 9/28/2011 4
EMI Suppressors Impregnated Paper – PME271M EMI Capacitors Class X2, 275VAC
Environmental Test Data
Test IEC Publication Procedure
Endurance EN/IEC 60384-14
1.25 x UR VAC 50Hz, once every hour increase to 1000 VAC for 0.1 s, 1000
h at upper rated temperature
Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 - 55 Hz at 0.75 mm or 98m/s2
Bump IEC 60068-2-29 Test Eb 1000 bumps at 390 m/s2
Change of Temperature IEC 60068-2-14 Test Na Upper and lower rated temperature 5 cycles
Active Flammability IEC 60384-14 UR + 20 surge pulses at 2.5 kV (pulse every 5 s)
Passive Flammability IEC 60384-14 IEC 60384-1, IEC 60695-11-5 Needle Flame Test
Damp Heat Steady State IEC 60068-2-78 Test Cab +40°C and 90 - 95% R.H., 56 days
Environmental Compliance
All KEMET EMI capacitors are RoHS compliant and Halogen Free.
Approvals
Mark Specication File Number
EN/IEC 60384-14 SE/0140-16A
UL 1414 (up to 1μF, 85°C, 250VAC) E73869
CSA - C22.2 No. 1 (up to 1μF, 85°C, 250VAC) E73869
UL 1283 (310VAC) E100117
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 9/28/2011 5
EMI Suppressors Impregnated Paper – PME271M EMI Capacitors Class X2, 275VAC
Table 1 – Ratings & Part Number Reference
Lead Space Cap Value (µF) B (mm) H (mm) L (mm) dV/dt
(V/µsec) F Article Code Part Number
10.2 0.001 3.9 7.5 13.5 1200 P276HE102M275A PME271M410MR30
10.2 0.0015 3.9 7.5 13.5 1200 P276HE152M275A PME271M415MR30
10.2 0.0022 3.9 7.5 13.5 1200 P276HE222M275A PME271M422MR30
10.2 0.0033 4.1 8.2 13.5 1200 P276HH332M275A PME271M433MR30
10.2 0.0047 5.1 10.5 13.5 1200 P276HL472M275A PME271M447MR30
10.2 0.0068 5.1 10.5 13.5 1200 P276HL682M275A PME271MA4680MR30
15.2 0.0068 5.2 10.5 18.5 1200 P276QE682M275A PME271M468MR30
15.2 0.01 5.2 10.5 18.5 1200 P276QE103M275A PME271M510MR30
15.2 0.015 5.2 10.5 18.5 1200 P276QE153M275A PME271M515MR30
15.2 0.022 612.5 18.5 1200 P276QL223M275A PME271M522MR30
15.2 0.033 612.5 18.5 1200 P276QL333M275A PME271M533MR30
15.2 0.047 612.5 18.5 1200 P276QL473M275A PME271M547MR30
15.2 0.068 7. 8 13.5 18.5 1200 P276QP683M275A PME271M568MR30
15.2 0.1 8.5 14.3 18.5 1200 P276QS104M275A PME271MB6100MR30
20.3 0.1 7.6 14 24 600 P276CE104M275A PME271M610MR30
20.3 0.15 915 24 600 P276CJ154K275A PME271M615KR30
20.3 0.22 11.3 16.5 24 600 P276CP224K275A PME271M622KR30
22.5 0.1 817 27 600 P276SJ104M275A PME271MD6100MR30
22.5 0.15 817 27 600 P276SJ154K275A PME271MD6150KR30
22.5 0.22 10 19 27 600 P276SP224K275A PME271MD6220KR30
22.5 0.27 12 22 27 400 P276SU274K275A PME271MD6270KR30
22.5 0.33 12 22 27 400 P276SU334K275A PME271MD6330KR30
25.4 0.27 10.5 17.3 30.5 400 P276EG274K275A PME271M627KR30
25.4 0.33 12.1 19 30.5 400 P276EJ334K275A PME271M633KR30
25.4 0.47 15.3 22 30.5 400 P276EL474K275A PME271M647KR30
25.4 0.6 15.3 22 30.5 400 P276EL604K275A PME271M660KR30
Lead Space Cap Value (µF) B (mm) H (mm) L (mm) dV/dt
(V/µsec) F Article Code Part Number
Other part number options:
(1) Where the 14th character equal to, J (±5% tolerance), K (±10% tolerance) and M (±20% tolerance).
(2) Refer to Ordering Options Table for Ordering Code.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 9/28/2011 6
EMI Suppressors Impregnated Paper – PME271M EMI Capacitors Class X2, 275VAC
Soldering Process
The implementation of RoHS Directive has forced to select SnAuCu
(SAC) alloys or SnCu alloys as primary solder. This has increased
the liquidus temperature from that of 183ºC for SnPb eutectic alloy
to 217–221ºC for the new alloys. This means that the heat stress to
components, even in wave soldering, has increased considerably
due to higher pre-heat and wave temperatures. The Polypropylene
Capacitors are especially sensitive to heat (melting point of
Polypropylene is 160–170ºC). The wave soldering can be destructive
especially for mechanically small Polypropylene Capacitors (lead
spacings 5-10 mm), and great care has to be taken when soldering
them. The recommended solder proles from KEMET should be
used. In case of doubt, KEMET should be consulted. In general the
wave soldering curve from IEC Publication 61760-1 edition 2 gives a
good guideline for successful soldering.
Marking
• Manufacturer's logo
• Article series
• Rated capacitance
• Capacitance tolerance
• Rated voltage
• Capacitor class
• Approval marks
• Manufacturing date code
• IEC climatic category
• Passive ammability class
• Manufacturing date code
• Manufacturing plant
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 9/28/2011 7
EMI Suppressors Impregnated Paper – PME271M EMI Capacitors Class X2, 275VAC
Packaging
Taping Speci cation
Dimensions in mm Standard IEC 60286-2
Lead spacing, (Tol. +0.6/-0.1) F 5.0/7.5 7.5 Crimped Leads 10.0/15.0 22.5/27.5 F
Carrier tape width, ±0.5 W18 18 18 18 18 (+1.0/-0.5)
Hold-down tape width, ±0.3 W
0
912 12 12
Position of sprocket hole, ±0.5 W
1
9 9 9 9 9 (+0.75/-0.5)
Distance between tapes, max. W
2
3 3 3 3 3
Sprocket hole diameter, ±0.2 D
0
4 4 4 4 4
Feed hole pitch, ±0.3 P
0
1) 12.7 15/12.7 12.7 12.7 12.7/15
Distance lead – feed hole, ±0.7 P
1
3.85/3.75 3.75 7.7/5.2 5.3 P
1
Max deviation tape – plane Δp 1.3 1.3 1.3 1.3 1.3
Max lateral deviation Δh 2 2 2 2 2
Total thickness, ±0.2 t0.7 0.7 0.7 0.9 max 0.9 max
Sprocket hole/cap body H2)
18.5 ±0.5
16.5 ±0.5
18.5 ±0.5 18.0 (+2/-0)
Sprocket hole/crimped leads H0
2)
16 ±0.5
18 ±0.5
16 ±0.5
Sprocket hole/top of cap body, max H
1
3) 32/31 max 40 max 43 max 58 58 max
1) Cumulative pitch error
2) Alternatives for different insertion machines
3) Depending on case size
Note: Crimped leads available on request
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 9/28/2011 8
EMI Suppressors Impregnated Paper – PME271M EMI Capacitors Class X2, 275VAC
Reel Speci cation
Dimensions in mm Tolerance
Reel diameter A 360/500 max
Hub diameter N 80 min
Arbor hole C30 ±1
Total reel width
measured at hub
W2 58 max
The standard packing for lead space ≤15 mm is 360 mm reel and for lead
space >15 mm 500 mm reel.
Ammo Pack Speci cation
Dimensions in mm Lead spacing, mm
5, 7.5, 10 15, 22.5, 27.5, 37.5
Height H330
(135 or 200 for
CQ depending on
capacitance value)
Width W330 (335 for CQ)
Thickness T50
H
T
W
The Manufacturing Date Code Y Z, according to IEC 60062
where Y = year, Z = month
Year
Code
Year
Code
Year
Code
Month
Code
Month
Code
1991
B
2001
N
2011
B
Jan
1
July
7
1992
C
2002
P
2012
C
Febr
2
Aug
8
1993
D
2003
R
2013
D
March
3
Sept
9
1994
E
2004
S
2014
E
April
4
Oct
O
1995
F
2005
T
2015
F
May
5
Nov
N
1996
H
2006
U
2016
H
June
6
Dec
D
1997
J
2007
V
2017
J
1998
K
2008
W
2018
K
1999
L
2009
X
2019
L
2000
M
2010
A
2020
M
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 9/28/2011 9
EMI Suppressors Impregnated Paper – PME271M EMI Capacitors Class X2, 275VAC
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
West Chester, PA
Tel: 610-692-4642
Central
Schaumburg, IL
Tel: 847-882-3590
Carmel, IN
Tel: 317-706-6742
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Zapopan, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Geneva, Switzerland
Tel: 41-22-715-0100
Paris, France
Tel: 33-1-4646-1009
Sasso Marconi, Italy
Tel: 39- 051-939111
Milan, Italy
Tel: 39-02-57518176
Rome, Italy
Tel: 39-06-23231718
Madrid, Spain
Tel: 34-91-804-4303
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Dortmund, Germany
Tel: 49-2307-3619672
Kwidzyn, Poland
Tel: 48-55-279-7025
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-757201
Weymouth, United Kingdom
Tel: 44-1305-830747
Coatbridge, Scotland
Tel: 44-1236-434455
Färjestaden, Sweden
Tel: 46-485-563934
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 9/28/2011 10
EMI Suppressors Impregnated Paper – PME271M EMI Capacitors Class X2, 275VAC
Other KEMET Resources
Disclaimer
All product speci cations, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
speci cally disclaim – any warranty concerning suitability for a speci c customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
Tools
Resource Location
Con gure A Part: CapEdge http://capacitoredge.kemet.com
SPICE & FIT Software http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask
Product Information
Resource Location
Products http://www.kemet.com/products
Technical Resources (Including Soldering
Techniques) http://www.kemet.com/technicalpapers
RoHS Statement http://www.kemet.com/rohs
Quality Documents http://www.kemet.com/qualitydocuments
Product Request
Resource Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Contact
Resource Location
Website www.kemet.com
Contact Us http://www.kemet.com/contact
Investor Relations http://www.kemet.com/ir
Call Us 1-877-MyKEMET
Twitter http://twitter.com/kemetcapacitors
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 9/28/2011 11
EMI Suppressors Impregnated Paper – PME271M EMI Capacitors Class X2, 275VAC
Digitally signed by Marcy Brand
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corporation, ou=Marketing Communications,
cn=Marcy Brand, email=marcybrand@kemet.com
Date: 2011.10.13 16:15:08 -04'00'