DC Fan Motors San Ace DC 80mm DC Fan Motor San Cooler 80 General specifications It depends on each part numbers (Survival rate: 90% at 60, rated voltage,and continuously run in a free air state) Motor protection system Current blocking function (with reverse polarity protection) Dielectric strength 50/60 Hz, 500VAC, 1 minute (between lead conductor and frame) Noise measurement method Measured at 1m away from the air inlet Operating temperarity range It depends on each part numbers (Non-condensing) Lead wire G,S,H,F speeds red, black M speed red, blue Mass 90g Expected life 25mm thick Specifications Rated voltage Operating voltage range Rated current Rated input Rated speed Air flow Static pressure Noise Operating temperature range Expected life V V A W min-1 m3/minCFM Pa inchH2O dBA h Model No. 9A0812G402(4021) 9A0812S402(4021) 9A0812H402(4021) 9A0812F402(4021) 9A0812M402(4021) 9A0812L402(4021) 9A0824G402(4021) 9A0824S402(4021) 9A0824H402(4021) 9A0824F402(4021) 9A0824M402(4021) 9A0824L402(4021) 613.2 0.38 0.18 0.13 0.11 0.09 0.06 0.21 0.1 0.07 0.06 0.05 0.04 613.8 12 713.8 1226.4 1227.6 24 1427.6 4.56 2.16 1.56 1.32 1.08 0.72 5.04 2.4 1.68 1.44 1.2 0.96 4,500 3,400 2,900 2,600 2,350 1,850 4,500 3,400 2,900 2,600 2,350 1,850 1.5 1.2 1.03 0.92 0.83 0.65 1.5 1.2 1.03 0.92 0.83 0.65 53.0 42.4 36.4 32.5 29.3 23.0 53.0 42.4 36.4 32.5 29.3 23.0 80.3 48 35.3 28.4 22.5 14.7 80.3 48 35.3 28.4 22.5 14.7 0.323 0.193 0.142 0.114 0.090 0.059 0.323 0.193 0.142 0.114 0.090 0.059 40 34 29 26 23 20 40 34 29 26 23 20 -10 60 30,000 -10 70 40,000 -10 60 30,000 -10 70 40,000 The numbers in ( ) represent ribless models. Air flow and static pressure characteristics 40 3 6V/12V 30 20 10 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 12V/24V 0.5 1.0 3 1.5 40 13.8V/27.6V 12V/24V 30 6V/12V 20 10 0 0.5 1.0 3 1.5 30 13.8V/27.6V 12V/24V 20 6V/12V 10 0 0.5 1.0 3 1.5 13.8V/27.6V 20 12V/24V 6V/12V 10 0 0.5 1.0 3 80mm L speed 30 Static pressurePa 10 0 13.8V/27.6V M speed 40 Static pressurePa 20 50 F speed 50 Static pressurePa 50 40 30 H speed 60 Static pressurePa 12V/24V S speed Static pressurePa Static pressurePa G speed 100 90 80 70 60 20 13.8V/27.6V 12V/24V 10 0 7V/14V 0.5 1.0 Air flow m /min Air flow m /min Air flow m /min Air flow m /min Air flow m /min Air flow m3/min 9A0812G402 9A0824G402 9A0812S402 9A0824S402 9A0812H402 9A0824H402 9A0812F402 9A0824F402 9A0812M402 9A0824M402 9A0812L402 9A0824L402 Dimensions (unit : mm) 800.5 71.50.3 DC Fan Motors 44.30.3(84.30.3) Mounting hole 300 +50 00 10 Lead Wire AWG 24 4 71.50.3 800.5 4 250.5 Reference dimension of mounting holes and vent opening (unit : mm) Air inlet sidesAir outlet sides 4-4.5 71.50.3 78.5 90 71.50.3 78.5 80mm Notice The products shown in the catalog are subject to Japanese Export Control Law. Diversion contrary to the law of exporting country is prohibited. To protect against electrolytic cooling corrosion that may occur in locations of strong electromagnetic noise, we provide fans that are unaffected by electrolytic corrosion. Alternative measures to protect against electrolytic corrosion may include metallic finger guards or other metallic attachments. Please contact us for details. 1-15-1, Kita-otsuka, Toshima-ku,Tokyo 170-8451, Japan. PHONE : +81 3 3917 5151 Home Page:http//www.sanyodenki.co.jp 2005.4 Rev.D